Foshan Xode Electronics Technology X620 wireless barcode scanner User Manual

Foshan Xincode Electronics Technology Co., Ltd. wireless barcode scanner

Contents

User Manual

Download: Foshan Xode Electronics Technology X620 wireless barcode scanner User Manual
Mirror Download [FCC.gov]Foshan Xode Electronics Technology X620 wireless barcode scanner User Manual
Document ID2844133
Application ID72OHW7ZFejHIbmiycK6G4g==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize215.44kB (2693018 bits)
Date Submitted2015-12-16 00:00:00
Date Available2015-12-16 00:00:00
Creation Date2014-12-06 09:20:25
Producing SoftwareCorel PDF Engine Version 14.0.0.701
Document Lastmod2015-12-14 21:36:31
Document TitleUser Manual
Document CreatorCorelDRAW
Document Author: Administrator

wireless barcode scanner
X-620
User Manual
V:1.0
wireless barcode scanner knowledge
Performance
Strong decoding capability
Rugged housing design
Proprietary intellectual property
Comfortable and convenient to use
long life time button--3 million times
long lasting lithium battery with 700mAh
Packing list:
1*wireless barcode scanner;
1*user manual;
With the high-performance processor and decoder, it has a rapid decoding and
high precision reading ability.It can read bar codes easily on paper, products,
etc. because of the high resistance to environmental interference. The scanning
distance of it is much longer than other similar products. It has the advantages
of fast speed, high accuracy and excellent reading performance.
Housing Design Description
indicator light
shock
resistance cover
trigger button
Warning:
1. Please pull out the power supply and cable from
the scanner in stormy weather to avoid damaging.
2. Keep away from heat and maintain ventilation.
3. Keep away from water in the environment of
storage, transportation and operation.
4. Please use the original USB adapter of the device.
cable disassembly hole
To pull out the cable from the scanner, please plug in the clip to the cable
disassembly hole. The scanner transfers data to the computer via the adapter.
Please connect the adapter to the fixed computer USB interface. Do not plug in
or pull out the adapter frequently in order to help improving the working
efficiency and avoid man-made damage.
How to Use
First, connect the USB adapter to the computer.(No driver needed.)
Second, place the cursor to where you want to enter the information or open a
document in the computer, then use the barcode scanner to scan 1D barcodes.
When the document shows the information, it reads successfully.
Third, connect the charging cable to the bottom of the scanner and use the
computer USB interface or USB adapter to charge. The charging time is 2
hours. After finishing charging, the scanner can work 10 hours continuously.
The wireless barcode scanner has been set well before delivery. It can be used
directly. Please do not scan the barcodes in the manual optionally to test the
scanner. In case of scanning the setting barcodes and abnormal condition
occurs, scan the 'initialization setting' barcode and 'serial mode' barcode in the
manual.
Serial Mode
Initialization Setting
Reading Angle
Ÿ
Maintain a bevel between the scanner and the barcode to make a best
reading.
Ÿ
Do not keep the scanner in 90°with the barcode, otherwise the scanner can't
read.
Ÿ
The scanner must aim at the barcode and the beam must cover the whole
barcode. If don't, error maybe occur.
Electrical Parameters
correct way of reading
correct way of reading
Charging time: 2 hours
Charging voltage: DC5V±5%
Power:100MW(operation),500MW (maximum)
Currency:20MA(operation),100MA(maximum)
Standby currency: <20uA
Environmental Parameters
incorrect way of reading
incorrect way of reading
Light intensity: 3000-12000LUX
Temperature: 0℃-50℃(operation mode);-40℃-60℃(storage)
Package level: IP 52
Shock resistance: design to fall from 2 meters height from concrete surface
Technology Parameters
Physical Parameters
Size: 168mm*73mm*93mm
Weight: 300g
Charging interface: RJ-45 plug, 2 meters (with 5V charger, red light for charging,
green light for battery charged)
Housing material: ABS+PC
Scanning Standard
Correct Way of Scanning
Performance Parameters
Light source: visible laser diode, wave length 650nmTrigger mode: manual (long
press the button to turn off the scanner)
Scanning mode: single line scanning
Scanning speed: 150±2 scans/sec
Resolution: ≥3mil
Error rate: 1/50million
Scanning resolution: minimum 30% contrast
Transmit frequency: 2.4G
Transmit distance: 30 meters(customized)
Depth of scanning field: 5mm-630mm
Scanning angle: ±60°±65°±42°
Decoding capability: international standard 1D barcodes like LIPC/EAN/JAN,
UPC/EAN with Supplemental, LICC/EAN 128, Code 39, MSI, Code11, Codabar,
Incorrect Way of Scanning
Incorrect Way of Scanning
Wireless Barcode Scanner Operation
Power On
Press the button. The scanner will beep two times and indicator light is on.
Clear Data
Power Off
Press the button for 5 seconds. The indicator light is off.
Sleep Time Setting
To set sleep time, first we need to scan 'sleep time' bar code.
Second, scan the time you want to set.
LED Indicator& Beeper
Indicator Light Color
Instruction
Green light and will be off soon
a short beep when reading
successfully
Beep Sound
Instruction
A short beep
reading barcodes and the green light
will be off soon
low voltage and please connect the
charger to charge
A long beep
Double short beep
turn on the scanner
Three long beep
fail to upload data and need to reset
the channel setting
Sleep Time
20 seconds
30 seconds
60 seconds
2 minutes
5 minutes
Scanning Mode Setup
Ÿ
Setup instruction:
Ÿ
Normal mode means real-time transmission. Scan 'Normal Mode' bar
code,the scanner will be in real-time transmission.
Ÿ
In inventory mode, the scanner will save the barcode it reads. When need to
upload the data to computer, scan 'Data Upload' bar code.
Ÿ
Scan 'Total Number of Data' bar code, the computer will show how many bar
codes the scanner reads under inventory mode.
Ÿ
Scan 'clear data' bar code means clear all the bar codes being read under
inventory mode.
Normal Mode
Data Upload
10 minutes
20 minutes
Paired with the Adapter& User ID Settings
Inventory Mode
Channel Settings
Ÿ
If the scanner doesn't connect to the computer (data will not be uploaded to
the computer), please do the following steps
Ÿ
Channel settings need to be finished within 10 seconds after connect the
adapter to the computer USB interface.
Ÿ
Scan 'Channel Settings' bar code
Ÿ
Scan two numeral bar codes on page 6. For example, scan '0' a nd '1' ,
channel number will be 01.
Ÿ
The setting range of the channel number can only be 01-20.
Total Number of Data
Channel Settings
User ID Settings
Ÿ
First, scan 'ID settings' .
Ÿ
Scan two numeral bar codes below. For example, scan '0' a nd '1' , ID
number will be 01. After finish setup, the ID number will be shown in front of
all the barcodes read by the scanner.
ID Settings
Shutdown/Default value/Version information
Shutdown
Software information
Hardware information
Default value
User ID is set to be shown. If need to hide user ID, scan 'ID Hidden' . Scan 'ID
Display' will show the User ID.
Barcode Setting
Code 11
ID Display
ID Hidden
Code 11/ off
Code 11 /on
ID Character ‘m’
ID Character ‘z’
Code 11
redundancy enable
Code 11
redundancy disable
Code 93
Code 93 /on
Code 93 /off
ID Character ‘h’
ID Character ‘z’
Code 93
redundancy enable
Code 93
redundancy disable
Code 39
Code 39/on
Code 39/off
Code 128
redundancy enable
Code 128
redundancy disable
CODABAR
Code 39 ALL ASCII-on
Code 39 ALL ASCII-off
CODABAR/on
Guide character - None
CODABAR/off
Guide character ‘+’
Send start/stop
CHARS - enable
Send start/stop
CHARS - disable
ID Character ‘a’
ID Character ‘z’
Code 39
redundancy enable
Code 39
redundancy disable
Code 128
Send start/stop
CHARS - enable
Send start/stop
CHARS - disable
ID Character ‘k’
ID Character ‘z’
CODABAR
redundancy enable
CODABAR
redundancy disable
Bar width gap
allowed- enable
Bar width gap
allowed - disable
Interleaved/ITF25
Code 128 /on
Code 128/off
ID Character ‘g’
ID Character “z”
Interleaved/ITF25-on
Interleaved/ITF25-off
ID Character ‘I’
ID Character ‘z’
ITF25 redundancy enable
ITF25 redundancy disable
Convert UPC-A
into EAN13 enable
Convert UPC-A
into EAN13 disable
Transmit system bit enable
Transmit system bit disable
Transmit check digit enable
Transmit check digit disable
ID Character ‘b’
ID Character ‘z’
Industrial 25
Industrial 25/on
Industrial 25/off
ID Character ‘k’
ID Character ‘z’
Industrial 25
redundancy enable
Industrial 25
redundancy disable
UPC-E
MSI/PLESSEY
UPC-E/on
MSI-on
UPC-E/off
MSI-off
Convert UPC-E
into UPC-A enable
ID Character ‘f’
Convert UPC-E
into UPC-A disable
ID Character ‘z’
MSI redundancy enable
Transmit system bit enable
Transmit system bit disable
Transmit check digit enable
Transmit check digit disable
MSI redundancy disable
UPC-A
UPC-A/on
UPC-A/off
10
ID Character ‘C’
ID Character ‘z’
11
EAN-13
ISBN
EAN-13/on
EAN-13/off
Convert EAN-13
into ISBN enable
Convert EAN-13
into ISBN disable
ISBN/on
ISBN/off
ID Character ‘f’
ID Character ‘z’
UPC/EAN
Transmit system bit enable
Transmit system bit disable
Transmit check digit enable
UPC/EAN
supplements disable
UPC/EAN
supplements- 2 digits
UPC/EAN
supplements- 5 digits
UPC/EAN
supplements- 2&5 digits
Transmit check digit disable
ID Character ‘e’
ID Character ‘z’
EAN-8
UPC/EAN redundancy enable
EAN-8/on
EAN-8/off
UPC/EAN redundancy disable
Code 32
CODE 32/on
Transmit system bit enable
Transmit system bit disable
Transmit check digit enable
Transmit check digit disable
ID Character ‘d’
ID Character ‘z’
12
CODE 32/off
13
Function Setting
Output Mode
Auto continuous scan
Version Number
Pulse
Initialization
Edit Setup Barcodes
Keyboard wedge
Show barcode type
Serial
Hide barcode type
Language Setting
Lower case
American English
German
French
Italian
Russian
Spanish
Capital
Reset
Reading Mode
Single scan
Single scan no trigger
Multiscan
Multiscan no trigger
14
Hide the first character
Hide the last character
15
Suffix Setting
Cancel suffix
Termination CHAR- CR
Termination CHAR- space
Termination CHAR- TAB
Termination CHAR- TAB/CR
Termination CHAR- CR+CR
All codes preamble- STX
All codes postamble- ETX
16
17
18
19
20
21
22
23
24
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : Administrator
Create Date                     : 2014:12:06 09:20:25Z
Modify Date                     : 2015:12:14 21:36:31+08:00
Title                           : 图形1
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Creator Tool                    : CorelDRAW
Metadata Date                   : 2015:12:14 21:36:31+08:00
Format                          : application/pdf
Title (x)                       : 图形1
Creator                         : Administrator
Producer                        : Corel PDF Engine Version 14.0.0.701
Document ID                     : uuid:75ae7c1c-9f59-4774-b56c-6f6a3397c19b
Instance ID                     : uuid:5f8529e2-de16-4bdb-b360-21fa7736f5e8
Page Count                      : 15
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2AAPV-X620

Navigation menu