Fujitsu 08. FBR 12 Series (p62 65) FBR12
User Manual: Fujitsu FBR12 Series Datasheet - Fujitsu United States
Open the PDF directly: View PDF .
Page Count: 6
Download | |
Open PDF In Browser | View PDF |
MINIATURE RELAY 2 POLES—1 to 2 A (FOR SIGNAL SWITCHING) FBR12 SERIES ■ FEATURES DI ● ● ● ● ● ● Super miniature size: 0.2 inch × 0.1 inch grid, 12 pin DIP Up to 50% less volume and board area than previous generation telecom relay. Slim type for high density mounting Conforms to Bellcore TR-NWT-001089 and FCC Part 68 requirements UL recognized and CSA certified Low power consumption Conforms to IEC 950 (W type only) – 2.5 mm clearance and creepage between coil and contacts –5000 V surge strength between coil and contacts (2x10µs surge wave) –2000 Vrms dielectric strength between coil and contacts –UL 1950 and IEC950 (approval in process) SC ON TIN ■ ORDERING INFORMATION [Example] (a) FBR12 N (a) (b) D (c) 12 (d) –P (e) –** (–CSA) (f ) (g) UE D Series Name FBR12 : FBR12 Series (b) Enclosure & Coil Power N W H : Standard (plastic sealed type) : High dielectric strength type (plastic sealed type) : High sensitivity type (c) Coil Type D : DC coil (d) Nominal Voltage (e) Contact Material Nil –P (f) Custom Designation To be assigned custom specification (g) CSA Standard –CSA –CSA Refer to the COIL DATA CHART : Gold-overlay silver-nickel : Gold-overlay silver-palladium (20 02 ) : UL114 + CSA recognized : UL1950 + CSA (under application) Note: The designation name is stamped on the top of the relay case as follows: (Example) Designation ordered: FBR12ND05 Stamp: 12ND05 ■ SAFETY STANDARD AND FILE NUMBERS UL508, 1950, 114 (File No. E63615) C22.2 No. 0, No. 14 (File No. LR40304 or LR64026) Nominal coil voltage 3 to 24 VDC Contact rating 0.5 A 125 VDC resistive 2 A 30 VDC resistive 0.3 A 110 VAC resistive 1 FBR12 SERIES ■ SPECIFICATIONS Item Standard (Gold-overlay silver-nickel) Standard Contact DI Coil Material Gold-overlay silver-nickel Style Bifurcated Resistance (initial) Maximum 100 mΩ (at 0.1 A 6 VDC) Rating (resistive) 0.5 A 125 VAC or 1 A 30 VDC Maximum Carrying Current 2 A (at 20°C) Maximum Switching Power 62.5 VA or 60 W Max. Switching Voltage*1 250 VAC or 220 VDC Maximum Switching Current 2A Minimum Switching Load*2 10 µA 10 VDC (reference) ON Nominal power (at 20°C) Approximately 0.14 to 0.2 W TIN Approximately 0.08 to 0.112 W Approximately 0.13 to 0.14 W Approximately 0.14 to 0.2 W Approximately 0.23 to 0.25 W Approximately 0.08 to 0.112 W Approximately 0.13 to 0.14 W Approximately 115°C/W UE 45 to 85%RH Operate (at nominal voltage) Maximum 4 msec. Release (at nominal voltage) Maximum 4 msec. Max. Switching Frequency Mechanical 3 Hz or electrical 0.5 Hz (at contact rating) Resistance (initial) Minimum 1000 MΩ (at 500 VDC) 1,500 1,000 VAC 750 1 minimum Dielectric between open contacts Strength adjacent contacts Surge Strength between coil and contacts 1,500 VAC 1 min. between open contacts, adjacent contacts 1,500 V 10 × 700 µs between coil and contacts 2,500 V 2 × 10 µs D 10 700 1,500 VAC 1 min. 2,000 VAC 1 min. 2,500 1,250 2 5,000 V 2 × 10 µs 02 2,000 VAC 1 min. 10 2,500 V 2 × 10 µs DC 2 × 105 operations minimum 5,000 V 2 × 10 µs ) AC 1 × 105 operations minimum 5 × 105 operations minimum 200 × 103 operations minimum Vibration Resistance Misoperation 10 to 55 Hz (double amplitude of 3.3 mm) Endurance 10 to 55 Hz (double amplitude of 5.0 mm) Shock Resistance Misoperation 500 m/s2 (11±1 ms) Endurance 1,000 m/s2 ( 6 ±1 ms) Weight (20 1 × 108 operations minimum Mechanical Electrical (at contact rating) *1 Approximately 0.23 to 0.25 W –40°C to +85°C (no frost) (refer to the CHARACTERISTIC DATA) Operating Humidity Other Gold-overlay silver-palladium Approximately 1.0 pF (between open contacts, adjacent contacts ) Approximately1.0 pF (between coil and contacts) Operating Temperature Life High dielectric strength type Capacitance (at 10 kHz) Thermal Resistance at Continuous Thermal Load Insulation Standard 2 form C (DPDT) Operate power (at 20°C) Time Value High dielectric strength type Arrangement SC -P type (Gold-overlay silver-palladium) Approx. 1.5 g Approx. 1.9 g Approx. 1.5 g Approx. 1.9 g If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the type of load. *2 Values when switching a resistive load at normal room temperature and humidity and in a clean environment. The minimum switching load varies with the switching frequency and operation environment. 2 FBR12 SERIES ■ SPECIFICATIONS Item High Sensitive Type Standard (Gold-overlay silver-nickel) Contact DI Arrangement 2 form C (DPDT) Material Gold-overlay silver-nickel Style Bifurcated Resistance (initial) Maximum 100 mΩ (at 0.1 A 6 VDC) Rating (resistive) 0.3 A 125 VAC or 1 A 30 VDC Maximum Carrying Current 2 A (at 20°C) SC Coil Maximum Switching Power 62.5 VA or 30 W Max. Switching Voltage*1 250 VAC or 220 VDC 2A Minimum Switching Load*2 10m VDC - 10µ A Capacitance (at 10 kHz) Approximately 1.0 pF (between open contacts, adjacent contacts ) Approximately1.0 pF (between coil and contacts) ON Nominal power (at 20°C) Operating Temperature TIN 45 to 85%RH UE Maximum 5 msec. Release (at nominal voltage) Maximum 5 msec. Resistance (initial) Minimum 1000 MΩ (at 500 VDC) Dielectric between open contacts Strength adjacent contacts 750 VAC 1 minute between coil and contacts 1,500 VAC 1 minutes between open contacts, adjacent contacts 1,500 V 10 × 700 µs between coil and contacts D DC 2 × 105 operations minimum AC 1 × 105 operations minimum ) 5 × 105 operations minimum 200 × 103 operations minimum Vibration Resistance Misoperation 10 to 55 Hz (double amplitude of 3.3` mm) Endurance 10 to 55 Hz (double amplitude of 5.0 mm) Shock Resistance Misoperation 500 m/s2 (11±1 ms) Endurance 1,000 m/s2 ( 6 ±1 ms) Weight (20 02 2,500 V 2 × 10 µs 1 x 108 operations minimum Mechanical Electrical (at contact rating) Other Approximately 40m W Operate (at nominal voltage) Surge Strength Life Approximately 50mW –40°C to +70°C (no frost) (refer to the CHARACTERISTIC DATA) Operating Humidity Insulation Gold-overlay silver-palladium Maximum Switching Current Operate power (at 20°C) Time Value -P type (Gold-overlay silver-palladium) Approx. 1.9 g *1 If the switching voltage exceeds the rated contact voltage, reduce the current. The current values vary according to the type of load. *2 Values when switching a resistive load at normal room temperature and humidity and in a clean environment. The minimum switching load varies with the switching frequency and operation environment. 3 FBR12 SERIES ■ COIL DATA CHART 1.STANDARD MODEL Nominal Coil current resistance (at nominal (±10%) voltage) approx. Nominal voltage Standard -P type FBR12ND03 FBR12ND03-P 3 VDC 64.3 Ω 46 mA FBR12ND04 FBR12ND04-P 4.5 VDC 145 Ω 31 mA FBR12ND05 FBR12ND05-P 5 VDC 178 Ω 28 mA FBR12ND06 FBR12ND06-P 6 VDC 257 Ω 23 mA FBR12ND09 FBR12ND09-P 9 VDC 579 Ω 15 mA FBR12ND12 FBR12ND12-P 12 VDC 1,028 Ω 11 mA FBR12ND24 FBR12ND24-P 24 VDC 2,880 Ω 8 mA DI SC Must operate1 voltage* Must operate1 voltage* Operate power Coil temperature rise Approx. 0.08 W Max. Approx. 20 deg Max. (at nominal voltage) 0.2 W 0.112 W 30 deg Nominal power Operate power Coil temperature rise Approx. 0.13 W Max. Approx. 30 deg (at nominal voltage) 0.14 W 33 deg Nominal power 75% max. 10% min. Approx. W of nominal of nominal (at0.14 nominal voltage voltage voltage) *1: Specified values are subject to pulse wave voltage. Note: All values in the table are measured at 20°C. ON 2.HIGH DIELECTRIC STRENGTH MODEL Nominal voltage Standard -P type FBR12WD03 FBR12WD03-P FBR12WD04 FBR12WD04-P 4.5 VDC FBR12WD05 FBR12WD05-P 5 VDC FBR12WD06 FBR12WD06-P FBR12WD09 Nominal Coil current resistance (at nominal voltage) (±10%) approx. TIN 39 Ω 77 mA 88 Ω 51 mA 108 Ω 46 mA 6 VDC 156 Ω 38 mA FBR12WD09-P 9 VDC 352 Ω 25 mA FBR12WD12 FBR12WD12-P 12 VDC 626 Ω 19 mA FBR12WD24 FBR12WD24-P 24 VDC 2,304 Ω 10 mA 3 VDC Must operate1 voltage* Must release 1 voltage* UE 75% max. 10% min. Approx. W of nominal of nominal (at0.23 nominal voltage voltage voltage) D 0.25 W *1: Specified values are subject to pulse wave voltage. Note: All values in the table are measured at 20°C. 02 3. HIGH SENSITIVITY TYPE MODEL Nominal voltage Coil resistance (±10%) Standard -P type FBR12HD03 FBR12HD03-P 3 VDC 180 Ω FBR12HD04 FBR12HD04-P 4.5 VDC 405 Ω FBR12HD05 FBR12HD05-P 5 VDC 500 Ω FBR12HD06 FBR12HD06-P 6 VDC 720 Ω FBR12HD09 FBR12HD09-P 9 VDC 1,620 Ω FBR12HD12 FBR12HD12-P 12 VDC 2,880 Ω Must operate1 voltage* Must release1 voltage* (20 Nominal power 80% max. 10% min. Approx. W of nominal of nominal (at0.05 nominal voltage voltage voltage) ) Operate power Coil temperature rise Approx. 0.04 W Max. Approx. 4 deg (at nominal voltage) *1: Specified values are subject to pulse wave voltage. Note: All values in the table are measured at 20°C. 4 FBR12 SERIES ■ CHARACTERISTIC DATA Maximum switching capacity Range of operation temperature and voltage Life curve 160 140 130 120 Contact load current (A) e ltag l vo coi ble wa allo 150 Operating voltage range 110 100 90 DI 80 rate t ope Mus 70 SC ge volta ➀ AC resistive load ( AC contact rating) ➁ DC resistive load ( DC contact rating) 2.0 ➁ 1.0 ➀ 0.5 0.3 0.2 0.1 –10 0 10 20 30 40 50 60 70 80 10 20 30 125 50 500 Service life (operations) (DATA) assumes that the maximum allowable temperature of E type insulation coil is 115˚C um xim Ma Nominal voltage multiplying factor (%) (×104) 30 V DC resistive load 100 (–P)TYPE 50 125 V AC resistive load 10 5 (–P)TYPE 1 0.5 200 Contact load voltage (V) Operating temperature (˚C) 1.0 1.5 2.0 Contact load current (A) ■ REFERENCE DATA ON Distribution of operate and release voltage 60 Distribution of contact resistance 80 Operate Release Operate Release 80 30 20 TIN 60 40 20 10 0 60 0 0 10 20 30 40 50 60 70 80 40 UE 20 0 0 1 Rated coil voltage multiplying factor (%) 2 3 4 5 6 Time (ms) ■ DIMENSIONS ●Dimensions 7 8 0 10 D 20 30 ●Schematics (BOTTOM VIEW) 50 60 70 1 3 4 5 12 10 9 8 (20 9.7+0.3 3.2 (0.95) 0.50 5.08 0.25 (1.06) 80 ●PC board mounting hole layout (BOTTOM VIEW) 7.2+0.3 14.6+0.4 40 Contact resistance (mΩ) 5.08 40 Distribution (%) Distribution (%) Distribution (%) 50 Distribution of operate and release time 100 5.08 2.54 2.54 02 ) 8– ø1 .00 ✽SHOW ONE OUT OF THBSB 3 DIMENSIONS (See NA) ●Tube carrier 500±2 15.6 Max. 10.6 Max. Unit: mm 30 pcs/Tube 5 FBR12 SERIES Fujitsu Components International Headquarter Offices DI SC Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info.marketing@fceu.fujitsu.com Web: www.fceu.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: marcom@fcai.fujitsu.com Web: www.fcai.fujitsu.com Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 375-8560 Fax: (65) 273-3021 Email: fcal@fcal.fujitsu.com www.fcal.fujitsu.com © 2001 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 09/2001 ON TIN UE D (20 02 ) 6
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.1 Linearized : No Page Count : 6 Create Date : 2012:04:24 15:09:57 Producer : Acrobat Distiller 3.0 for Power Macintosh Subject : 08. FBR 12 Series (p62-65) Creator : Adobe PageMaker 6.5 Title : 08. FBR 12 Series (p62-65) Author :EXIF Metadata provided by EXIF.tools