Garmin 02416 LOW POWER TRANSMITTER User Manual USERS MANUAL 1
Garmin International Inc LOW POWER TRANSMITTER USERS MANUAL 1
Garmin >
Contents
- 1. USERS MANUAL 1
- 2. USERS MANUAL 2
- 3. USERS MANUAL 3
USERS MANUAL 1
GPSMAP
®
62 series
quick start manual
For use with the GPSMAP 62,
62s, 62st, 62sc, and 62stc
2 GPSMAP 62 Series Quick Start Manual
See the Important Safety and Product
Information guide in the product
box for product warnings and other
important information
When using your device the rst time,
you should complete the following
tasks to set up the device and get to
know the basic features.
1. Install the batteries (page 2).
2. Turn on the device (page 3).
3. Acquire satellites (page 3).
4. Mark a waypoint (page 5).
5. Calibrate the compass (page 6).
6. Navigate with the search menu
(page 8).
7. Navigate a route (page 8).
Go to www.garmin.com to download
the latest manuals.
The device operates on two AA
batteries. Use alkaline, NiMH, or
lithium batteries. Use precharged
NiMH or lithium batteries for best
results.
1. Remove the battery cover by
turning the D-ring 1/4 turn counter-
clockwise and pulling up.
2. Insert the batteries, observing
polarity.
GPSMAP 62 Series Quick Start Manual 3
3. Replace the battery cover.
For best results, after you install new
batteries, update the battery type in the
system settings (page 10).
Press and hold
1. Turn on the unit.
2. Use the to select a
language.
It may take 30 to 60 seconds to acquire
signals.
1. Go outdoors to an open area.
2. If necessary, turn on the device.
3. Wait while the device searches for
satellites.
A question mark ashes while the
device determines your location.
4. Quickly press to open the
backlight status page.
The GPS bars indicate satellite
strength. When the bars are green,
the device has acquired satellite
signals.
4 GPSMAP 62 Series Quick Start Manual
Press and hold to turn
the device on and off.
Quickly press to open
the backlight status page.
Press to open the
search menu
Press to save
your current location as a
waypoint.
Press to cancel
or return to the previous
menu or page.
Press to select
options and acknowledge
messages.
Press to open the
options menu for the page
that is currently open.
Press twice to
open the main menu
(from any page).
Press to scroll
through the main pages
(page 5).
Press up, down, right, and
left to select menu options
and to move the map
cursor.
Press to zoom in on
the map.
Press to zoom out
on the map.
GPSMAP 62 Series Quick Start Manual 5
Waypoints are locations you record and
store in the device.
1. From any page, press .
2. Select .
Before you can edit a waypoint, you
must create a waypoint.
1. From the main menu, select
.
2. Select a waypoint.
3. Select an attribute (such as the
name or location).
4. Enter the new information.
5. Select .
1. From the main menu, select
.
2. Select a waypoint.
3. Press .
4. Select > .
The information needed to operate this
device is found on the following pages:
map, compass, main menu, and trip
computer.
The position icon represents your
location on the map. As you travel,
the position icon moves and leaves a
track log (trail). Waypoint names and
symbols also appear on the map.
1. From the map, press .
2. Select > .
3. Select an orientation:
• Select to show north
at the top of the page.
6 GPSMAP 62 Series Quick Start Manual
• Select to show your
current direction of travel at the
top of the page.
• Select to
show a perspective view.
You can move the cursor around the
map to measure distance from the
current location.
1. From the map, press .
2. Select .
The device automatically begins
measuring from your current
location.
3. Move the cursor to a point you
want to measure to.
The distance appears at the bottom
of the page.
4. Press to stop measuring.
When navigating to a destination,
the bearing pointer points to your
destination, regardless of the direction
you are moving. When the bearing
pointer points toward the top of the
electronic compass, you are traveling
directly toward your destination. If
it points any other direction, turn
toward that direction until the arrow is
pointing toward the top of the compass.
notice
Calibrate the electronic compass
outdoors. Do not stand near objects that
inuence magnetic elds, such as cars,
buildings, or overhead power lines.
: The three-axis compass is
available only with the GPSMAP 62s
and GPSMAP 62st.
You should calibrate the compass after
moving long distances, experiencing
GPSMAP 62 Series Quick Start Manual 7
temperature changes, or changing the
batteries.
1. From the compass, press .
2. Select > .
3. Follow the on-screen instructions.
: The elevation plot page is
available only with the GPSMAP 62s
and GPSMAP 62st.
You can manually calibrate the
barometric altimeter if you know
the correct elevation or the correct
pressure.
1. From the elevation plot, press
.
2. Select .
3. Follow the on-screen instructions.
The trip computer displays your current
speed, average speed, maximum
speed, trip odometer, and other helpful
statistics.
You can customize the data elds
displayed on each main page.
For data eld descriptions, see the
GPSMAP 62 Series Owner’s Manual.
1. From a main page, press .
2. Select .
3. Select a data eld.
4. Press .
Your Garmin device records a track log
while you are moving. You can save
these tracks and navigate using them
later.
8 GPSMAP 62 Series Quick Start Manual
You can use the search menu to quickly
nd waypoints, tracks, routes, and
coordinates that you have saved.
1. From any page, press .
2. Select .
3. Select a waypoint.
4. Select .
You can select a guidance method that
is for off-road use, that follows the
roads, or that prompts you each time
you begin navigating.
1. From the main menu, select
> > .
2. Select an option.
1. From the main menu, select
> >
.
2. Select a category.
3. Select the rst point in the route.
4. Select .
5. Select .
6. Repeat steps 2–5 until the route is
complete.
A route must contain at least two
points.
7. Press to save the route.
1. Press .
2. Select .
3. Select a route.
4. Select .
GPSMAP 62 Series Quick Start Manual 9
: Sight ‘N Go is available only
with the GPSMAP 62s and GPSMAP
62st.
You can point the device at an object
in the distance, such as a bridge, lock
in the direction, and then navigate to
the object.
1. From the main menu, select
.
2. Point the device at an object.
3. Select >
.
4. Use the compass to navigate to the
object.
You can take photos with the GPSMAP
62sc and GPSMAP 62stc.
1. Select > .
2. Turn the device horizontally or
vertically to change the orientation
of the photo.
3. If necessary, select orto zoom
in or out.
4. Hold to focus.
5. Release to take a photo.
1. Place the loop of the wrist strap
through the slot opening at the
bottom of the device.
2. Route the strap through the loop,
and pull it tight.
10 GPSMAP 62 Series Quick Start Manual
1. Position the carabiner clip in the
slots on the mounting spine.
2. Slide the clip up until it locks in
place.
Use the battery save option to save
battery power and prolong battery life.
From the main menu, select
> > > .
Extensive use of screen backlighting
can signicantly reduce battery life.
You can adjust the backlight brightness
and decrease the backlight timeout to
maximize battery power.
1. Quickly press to open the
backlight status page.
2. Use the to adjust the
brightness.
1. From the main menu, select
> > .
2. Select a time.
1. From the main menu, select
> > .
2. Select , , or
.
When you do not plan to use the
device for several months, remove the
batteries. Stored data is not lost when
GPSMAP 62 Series Quick Start Manual 11
batteries are removed.
Help us better support you by
completing our online registration
today.
• Go to http://my.garmin.com.
• Keep the original sales receipt, or a
photocopy, in a safe place.
If your device screen or buttons stop
responding, you can reset the device.
1. Remove the batteries.
2. Reinstall the batteries (page 2).
: This does not erase any of your
data or settings.
1. Go to www.garmin.com
/webupdater.
2. Follow the on-screen instructions.
: This does not erase any of your
data or settings.
You can contact Garmin Product
Support if you have any questions
about this product.
• In the USA, go to www.garmin
.com/support, or contact Garmin
USA by phone at (913) 397.8200 or
(800) 800.1020.
• In the UK, contact Garmin (Europe)
Ltd. by phone at 0808 2380000.
• In Europe, go to www.garmin.com
/support and click
for in-country support
information, or contact Garmin
(Europe) Ltd. by phone at +44 (0)
870.8501241.
Garmin
®
, the Garmin logo, and GPSMAP
®
are trademarks of Garmin Ltd. or its subsidiaries, registered in the
USA and other countries. These trademarks may not be used without the express permission of Garmin.
Other trademarks and trade names are those of their respective owners. For the latest free software updates
(excluding map data) throughout the life of your Garmin products, visit the Garmin Web site at
www.garmin.com.
© 2010–2011 Garmin Ltd. or its subsidiaries
Garmin International, Inc.
1200 East 151st Street, Olathe, Kansas 66062, USA
Garmin (Europe) Ltd.
Liberty House, Hounsdown Business Park, Southampton, Hampshire, SO40 9LR UK
Garmin Corporation
No. 68, Zhangshu 2nd Road,
Xizhi Dist., New Taipei City, 221, Taiwan (R.O.C.)
June 2011 Part Number 190-01351-01 Rev. A Printed in Taiwan