Garmin VESPXB8000 XB-8000 CLASS B AIS TRANSPONDER User Manual

Vesper Marine Limited XB-8000 CLASS B AIS TRANSPONDER INSTALL GUIDE

a href="https://usermanual.wiki/Garmin" itemprop="url"> Garmin >

Contents

INSTALL GUIDE

XB-8000 | XB-6000 INSTALL GUIDE
OPTIONAL ACCESSORIESWHAT YOU NEED TO GET GOING = Item Included = Item Included CONNECTIONSSTATUS LEDCOLOR STATE DESCRIPTIONGreen (OK) Solid Normal OperationFlashing Antenna VSWR is highBackground noise level on AIS receiver is highOrange(No Transmit)Solid Device initializing, silent mode, waiting to transmitFlashing Acquiring a GPS fixRed (Error) Solid/Flashing Built in integrity test error(See troubleshooting section for more info)Congratulations on your purchase. Your XB-8000 / XB-6000 AIS Transponder is a Class B AIS Transponder with integrated NMEA 2000 and WiFi* connectivity.The XB provides information to improve your situational awareness and assist in avoiding collisions at sea. Because it consumes very low power it may be left turned on whenever your vessel is underway. It works by interpreting Universal Shipborne Automated Identification System (AIS) messages which are sent over VHF by transponders installed on other vessels. The AIS system uses two dedicated VHF channels designated for this purpose and with the installation of the XB to receive these signals, you can distribute this information to other devices on board your vessel (e.g. chart plotters, laptops, smart phones) using NMEA 2000, USB and WiFi*. In addition, your vessel data is transmitted to other AIS-equipped vessels within range. For more information on AIS go to www.vespermarine.com/xb.(*XB-8000 only)XB-8000 or XB-6000External GPS Antenna with 10m cable10 pin power/data cableAIS/VHF antennaMMSI numberPC/Mobile Device for configuring XB settings2A fuse or circuit breaker1m USB cable (for configuration)Waterproof 5m USB cable with locking security ringNMEA 2000 cable, T connector and network extension cableSP160 Antenna Splitter Consider other equipment you may need to install this on your vessel e.g. additional cable, cable ties, mounting screws, wire strippers, screw driver etc.• AIS/VHF antenna• NMEA 2000 • GPS antenna• 10 pin power/data port• LED Status185mm (7 1/4”)98mm (3 7/8”)• USBMount your XB at least 0.6m (2 feet) from any compass. Test your compass to verify that it operates properly when the XB is operating.
Download:
Mirror Download [FCC.gov]
Document ID1836638
Application IDNMuhYUfLIJNgWudh9x2/mA==
Document DescriptionINSTALL GUIDE
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize141.16kB (1764544 bits)
Date Submitted2012-11-13 00:00:00
Date Available2012-11-13 00:00:00
Creation Date2012-10-15 12:45:56
Producing SoftwareAdobe PDF Library 9.0
Document Lastmod2012-10-15 12:46:02
Document TitleINSTALL GUIDE
Document CreatorAdobe InDesign CS4 (6.0.6)
FCC ID Filing: YJDVESPXB8000

Navigation menu