GemTek Technology C940615G Wireless 802.11g PCI Adapter User Manual

Gemtek Technology Co., Ltd. Wireless 802.11g PCI Adapter QIG PCI 117

a href="https://usermanual.wiki/GemTek-Technology" itemprop="url"> GemTek Technology >

Users Manual

Quick Installation Guide 802.11 b/g Wireless PCI Adapter Model Number : WPIR-117G Installation Steps This PCI Adapter operates with Windows XP and Windows 2000. 1. Turn down your computer, assembly PCI adapter with your computer then connect PCI with Antenna connector. 2. With the computer on and Windows running, insert the Installation CD into the CD-ROM drive. The auto-start feature starts the installation. If nothing happens within five seconds, click Start > Run and type d:\autorun.exe (where D: is your CD-ROM drive).and click OK. 3. Your computer goes through a brief installation process during which it displays several windows indicating what is currently installing. Respond to the prompts as they appear. n If a Windows errror message displays, select the option to continue the installation. n You may receive prompts for the Windows installation CD. Insert the CD for your Windows operating system and indicate the correct path. 4. Refer to the online help for details on using the PCI Adapter.
2 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Gemtek declares that WPIR-117G ( FCC ID: MXF-C940615G ) is limited in CH1~CH11 for 2.4GHz by specified firmware controlled in U.S.A.
Download:
Mirror Download [FCC.gov]
Document ID561257
Application IDUDcics5tbWMIHb2LMMYLNw==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize1.78kB (22275 bits)
Date Submitted2005-07-12 00:00:00
Date Available2005-07-19 00:00:00
Creation Date2005-07-08 19:16:28
Producing SoftwareAcrobat PDFWriter 5.0 for Windows NT
Document Lastmod2005-07-11 09:34:05
Document TitleQIG-PCI-117.doc
Document CreatorQIG-PCI-117 - Microsoft Word
Document Author: joy
FCC ID Filing: MXF-C940615G

Navigation menu