GemTek Technology WLTCS105 Band 41 TD-LTE Outdoor CPE User Manual

Gemtek Technology Co., Ltd. Band 41 TD-LTE Outdoor CPE LTE Outdoor Gateway Quick Installation Guide

a href="https://usermanual.wiki/GemTek-Technology" itemprop="url"> GemTek Technology >

User manual

LTE Outdoor Gateway Quick Installation Guide  Introduction  This Quick Installation Guide covers the basic installation of the LTE Outdoor Gateway.    Overview The LTE Outdoor Gateway is a LTE subscriber station designed to provide Internet access for a home or small office. The LTE Outdoor Gateway includes an outdoor unit (ODU) connected to a supply unit (IDU). The ODU provides the LTE Internet link, and the IDU serves as the gateway for a local Ethernet wired.  The indoor unit includes:  •  One standard RJ-45 Ethernet port for LAN connections.    •  One 8 PIN RJ-45 Ethernet port for connection to the ODU. This cable provides a dedicated Power-over-Ethernet (PoE) power supply to the ODU, as well as a data link between the ODU and the IDU. The IDU should be connected to an AC power connection.       Installing the ODU  Before installing the ODU, verify that you have all the items listed in the package checklist. If any of the items are missing or damaged, contact your LTE service provider.    Selecting a Location  The ODU should be pole-mounted outdoors and aligned so its antenna faces the nearest LTE base station. When selecting a suitable location for the unit, consider these guidelines:  •  Place the ODU as high as possible to achieve the best possible link quality.    •  Place the ODU away from power and telephone lines.    •  Avoid placing the ODU too close to any metallic reflective surfaces.    •    Be sure to ground the ODU with an appropriate grounding wire (not included) by attaching it to the grounding screw on the unit and to a good ground connection.           1
LTE Outdoor Gateway Quick Installation Guide  Additional information:  Check below items before installing the outdoor CPE: •  One RJ-14 connector for connecting to the telephone line. •  One RJ-45 connector for connecting to the PoE adaptor. •  LED indicator inside and SIM card slot for inserting SIM card. •  A grounding screw on the rear panel.                    Mounting the ODU Mount the ODU unit on a 1"-4" pole using the supplied kit (Figure 1), or the optional Tilt accessory.  Using the Clamp  1  Thread the M10*100mm bolt through a spring washer, flat washer and the bracket holes.   2  With the connector facing downward, attach the ODU to a 1" -4" pole.   3  Attach the bracket to the other side of the pole.   4  Thread the M10*100 mm bolts through both holes on either side. Tighten the nuts.    Figure 1: Mounting the ODU on the Pole    2
Download:
Mirror Download [FCC.gov]
Document ID2259445
Application IDLeDth0V9Ck0Pl9JgcwBEgQ==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize57.61kB (720155 bits)
Date Submitted2014-05-07 00:00:00
Date Available2014-05-08 00:00:00
Creation Date2017-10-23 00:00:16
Producing SoftwareGPL Ghostscript 9.18
Document Lastmod2017-10-23 00:00:16
Document TitleLTE Outdoor Gateway Quick Installation Guide
Document CreatorAcrobat PDFMaker 11 Word 版
Document Author: Melanie_Chang
FCC ID Filing: MXF-WLTCS105

Navigation menu