GemTek Technology U950529G USB Wireless 802.11b/g Adaptor User Manual UG

Gemtek Technology Co., Ltd. USB Wireless 802.11b/g Adaptor UG

Manual

User Manual USB Wireless 802.11 b/g AdaptorV 2.0
2 USB Wireless 802.11 b/g AdaptorInformation in this document is subject to change without notice.Microsoft, Encarta, MSN, and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.Copyright 2006 Gemtek Technology Corporation. All rights reserved.Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products.MODEL NUMBER: WUBR-177G©
3 USB Wireless 802.11 b/g Adaptoŕ́Table of Contents1 Introduction.................................................................................51.1 Inventory Checklist.............................................................................................51.2 Supported Security...........................................................................................62 Antenna Attachment............................................................................................73 Security Setting...............................................................................................84 WindowsXP Wireless Zero Configuration........................................................94.1 Launching MicrosoftWindowsXP Wireless Network Configuration........................94.2 Setting the Network Key Automatically............................................................104.3 Setting the Network Key Manually............................................................124.3.1 WEP: Setting the Network Key (Network Security)..............................................154.3.2 WPA: Setting the Network Key (Network Security)..............................................18Glossary........................................................................................31Appendix A: Troubleshooting............................................................................23Appendix B: Regulatory Notices..........................................................................24Appendix C: Product Specifications.........................................................................28Index..........................................................................................30
4 USB Wireless 802.11 b/g AdaptorTable of FiguresFigure 1: Antenna Attachment.......................................................... 7Figure 2: Wireless Network Icon............................................................ 9Figure 3: Wireless Network Connection dialog box ...........................................10Figure 4: Wireless Network Connection dialog box............................................11Figure 5: Connecting to Wireless.........................................................11Figure 6: Wireless Network Connection dialog box............................................12Figure 7: Wireless Network Connection dialog box ...........................................13Figure 8: Wireless Network Connection Properties dialog box........................................14Figure 9: Internet Protocol (TCP/IP) Properties dialog box...........................................14Figure 10: Manually adding a Wireless Network..............................................16Figure 11: Wireless Network Properties dialog box................................................... 17Figure 12: Wireless Network Connection Properties dialog box......................................18Figure 13: Wireless Network Properties dialog box.............................................19
5 USB Wireless 802.11 b/g AdaptorIntroduction1. IntroductionYour PC comes with a built-in USB Wireless 802.11 b/g adaptor which allows it to function as a Wireless Local Area Network (WLAN) connecting with other wireless product(s). This product is an IEEE 802.11g Compliant device. It features automatic rate selection and advanced security features like WEP, 802.1x, WPA/WPA2 with TKIP and AES for stronger data encryption.1.1 Inventory ChecklistIncluded with your HP PC should be the following items for your Wireless USB Adaptor:ΗDocumentation CD (Contains Quick Installation Guide and full User Manual)ΗA high gain omni directional antenna as well as an attachment pad ( See Chapter 2 for installation instructions)Note: Not all PC Configurations ship with this external omni-directional antenna. If your PC did not come with an antenna in a plastic packet then there is a built-in internal antenna already installed in your PC. In such case please skip chapter 2 of this manual as your PC does not need an external antenna.
6 USB Wireless 802.11 b/g AdaptorIntroduction1.2 Supported SecurityIn order to secure your network from passive or active intrusion, key features are enabled on WindowsXP Wireless Zero Configuration:ΗWPA personal securityΗWEP encryptionPlease see Chapter 3 for information on security settings for your USB Wireless adaptor.Note: In order to have the WPA encryption method, you must upgrade yourWindows XP to Service Pack 2.́
7 USB Wireless 802.11 b/g AdaptorAntenna Attachment2. Antenna AttachmentThis chapter contains instructions for antenna installation.1. Please find a connector at one end of the antenna cable. Screw this connector (A) to thematching antenna receptable (B) located at the back of the computer chassis.Figureȱ1:ȱAntennaȱAttachment2. Place the antenna in an elevated and open area for optimal wireless performance.3. You can optionally use the 'attachment pad' which comes with the accessory kit to makeyour antenna base stick to any flat surface. Avoid using the front panel of your computer tostick the antennaNote: If you have already attached the antenna to your PC, please skip to Chapter 3.)B*)C*
8 USB Wireless 802.11 b/g AdaptorSecurity Setting3. Security SettingSecurity can be set up using WEP (Wired Equivalency Protocol) or WPA (Wi-Fi Protected!Access). It is important to set up matching security types between devices. Be!certain to check the type of security on your other wireless device(s) in order to decide which type of security needs to be set up on your PC.WEP security was the original security standard provided for wireless 802.11 devices. WPA!security which offers more advanced encryption technology!is a more recent standard of secu-rity available.
9 USB Wireless 802.11 b/g AdaptorWindowsXPWireless Zero Configuration4. WindowsXP Wireless Zero ConfigurationIt is necessary to complete the steps in Chapter 2, Antenna Attachment prior to using Win-dowsXP Wireless Network Configuration.If you have already established a wireless network with access to the internet and you would like to wirelessly connect this HP PC to your wireless network, use WindowsXP Zero Config-uration (WindowsXP Wireless Auto Configuration).4.1. Launching MicrosoftWindowsXP Wireless Network ConfigurationTo launch WindowsXP Wireless Network Configuration:1. In the Systems Tray find the Wireless Networking icon.Figureȱ2:ȱWirelessȱNetworkȱIcon2. Select View Available Wireless Networks and the Wireless Network Connection dialogbox will appear.Note: There may be multiple Network icons in the system tray. Choose theone for Wireless Network Connection as shown above.́́
10 USB Wireless 802.11 b/g AdaptorWindowsXPWireless Zero Configuration4.2. Setting the Network Key AutomaticallyThe PC will begin functioning in Station Mode (as a Client) with your Wireless LAN Network as soon as the Network Key is set-up.1. Find the Network Key (WEP Key or WPA Key) for your Wireless Network.2. Select View Available Wireless Networks from the Wireless Network icon menu.The Wireless Network Connection dialog box will appear.Figureȱ3:ȱWirelessȱNetworkȱConnectionȱdialogȱbox3. Select the Wireless Network of your choice by clicking on its name and the entire blockwill become highlighted.4. Select Connect in the lower right corner.Note: If you do not have an existing wireless network you will need to set upyour Gateway prior to using your PC in Station Mode.
11 USB Wireless 802.11 b/g AdaptorWindowsXPWireless Zero ConfigurationThe Wireless Network Connection dialog box will appear as shown below.Figureȱ4:ȱWirelessȱNetworkȱConnectionȱdialogȱbox5. Enter your Network Key (WEP Key or WPA Key) for your Wireless Network.6. Input the Network Key a second time into the “Confirm network key” field.7. Select Connect.The Wireless Network Connection dialog box appears as you are being connected.Figureȱ5:ȱConnectingȱtoȱWirelessNote: If your network is using WEP encryption, then a HEX or an ASCIIformat is necessary when entering your Network Key:ΗHEX: 10 characters in HEX notation for 40 bit or 26 characters for 128bit encryption.ΗASCII: 5 characters for 40 bit or 13 characters for 128 bit encryption.If your network is using WPA it is necessary to enter an 8 – 63 characteralphanumeric key-phrase.The Network Key will accept any of these as it supports both WEP andWPA.
12 USB Wireless 802.11 b/g AdaptorWindowsXPWireless Zero ConfigurationAfter connection to a wireless network is established, a Wireless Network Connection dialog box, as shown below will appear/Figureȱ6:ȱWirelessȱNetworkȱConnectionȱdialogȱbox4.3. Setting the Network Key ManuallyAfter launching the application (See Section 4.1, Launching the application) you will need to input the Network name and Network Key. The Network name and Network Key must both be set up for your HP PC to function with your current network in Station Mode.Before manually setting up the Network name and Network Key on your HP PC you must identify this information on your current wireless network:ΗNetwork name (SSID)ΗSecurity WPA-PSK Key OR Security WEP KeyThe Wireless Network Connection dialog box appears when you have launchedWindowsXP Wireless Zero Configuration:
13 USB Wireless 802.11 b/g AdaptorWindowsXPWireless Zero ConfigurationFigureȱ7:ȱWirelessȱNetworkȱConnectionȱdialogȱbox1. Choose your Wireless Network in the Available Wireless Networks selection box.Your network will become highlighted as shown in figure 7.2. Select Change advanced settings found on the left side of the dialog box.Note: Your Network name will appear in the Wireless Network Connectionwindow. Any other listed available wireless networks represent thewireless networks established within range of your PC. These will varyand may not provide secured access to the internet.
14 USB Wireless 802.11 b/g AdaptorWindowsXPWireless Zero ConfigurationThe Wireless Network Connection Properties dialog box appears.Figureȱ8:ȱWirelessȱNetworkȱConnectionȱPropertiesȱdialogȱbox3. Select the General tab in the Wireless Network Connection Properties dialog box.4. Highlight Internet Protocol (TCP/IP) in the “This connection uses the following!items:”selection box.5. Select Properties.The Internet Protocol (TCP/IP) Properties dialog box appears with the General tab displayed.Figureȱ9:ȱInternetȱProtocolȱ(TCP/IP)ȱPropertiesȱdialogȱbox
15 USB Wireless 802.11 b/g AdaptorWindowsXPWireless Zero Configuration6. Verify that the following choices are selected:ΗObtain an IP address automaticallyΗObtain DNS server address automatically7. Select OK.You are returned to the Wireless Network Connection Properties dialog box.For instructions on how to set WEP security refer to Section 4.3.1. For instructions on how to set WPA security refer to Section 4.3.2.4.3.1 WEP: Setting the Network Key (Network Security)This section gives instruction on how to correctly set up WEP security on your HP PC. If you are currently running a WPA enabled device, skip to Section 4.3.2, WPA: Setting the Network Key (Network Security).In order to set up your Network Key (WEP security feature) you will need to do the following:1. Open the Wireless Network Connection Properties dialog box:ΗRight click on the Wireless Networks icon in the system tray.ΗSelect View Available Wireless Networks from the Wireless Networks Icon menu.The Wireless Network Connection dialog box appears.ΗSelect Change advanced settings on the left side of the dialog box.The Wireless Network Connection Properties dialog box appears.
16 USB Wireless 802.11 b/g AdaptorWindowsXPWireless Zero ConfigurationΗSelect the Wireless Networks tab as shown in figure 10 below.Figureȱ10:ȱManuallyȱaddingȱaȱWirelessȱNetwork2. Select Add under the Preferred networks selection box.The Wireless Network Properties dialog box appears.
17 USB Wireless 802.11 b/g AdaptorWindowsXPWireless Zero ConfigurationFigureȱ11:ȱWirelessȱNetworkȱPropertiesȱdialogȱbox3. Input your Network name (SSID).4. Uncheck the box “The key is provided for me automatically”.5. Verify that the Network Authentication is set to Open.6. Verify that the Data Encryption is set to WEP.7. Input the Network Key of your Access Point, Wireless Broadband Router or WirelessGateway.ΗHEX: 10 characters in HEX notation for 40 bit, or 26 characters for 128 bit.ΗASCII: 5 characters for 40 bit, 13 characters for 128 bit.8. Input the Network Key a second time into the #Confirm network key# box.9. Select OK.You are returned to the Wireless Network Connection Properties dialog box and are ableto verify your connection.Note: Either a HEX or ASCII format is necessary when using the WEPinterface. Your WEP enabled device should already have either HEX orASCII format pass-phrase associated. Consult the information asked for insection 4.2.
18 USB Wireless 802.11 b/g AdaptorWindowsXPWireless Zero Configuration4.3.2 WPA: Setting the Network Key (Network Security)This section gives instruction on how to correctly set up WPA security on your HP PC. If you are currently running a WEP enabled device, return to Section 4.3.1, WEP: Setting the Net-work Key (Network Security).In order to set up your Network Key (WPA security feature) you will need to do the!following:1. Open the Wireless Network Connection Properties dialog box:ΗRight click on the Wireless Networks icon in the system tray.ΗSelect View Available Wireless Networks from the Wireless Networks icon menu.The Wireless Network Connection dialog box appears.ΗSelect Change advanced settings on the left side of the dialog box.The Wireless Network Connection Properties dialog box appears.ΗSelect the Wireless Networks tab as shown in figure 12 below.Figureȱ12:ȱWirelessȱNetworkȱConnectionȱPropertiesȱdialogȱbox
19 USB Wireless 802.11 b/g AdaptorWindowsXPWireless Zero Configuration2. Select Add under the Preferred networks selection box. The Wireless Network Properties dialog box appears as shown in figure 14/Figureȱ13:ȱWirelessȱNetworkȱPropertiesȱdialogȱbox3. Uncheck the box “The key is provided for me automatically”.4. Verify that the Network Authentication is set to WPA-PSK.5. Verify that the Data Encryption is set to TKIP or AES.6. Input the Network Key of your Access Point, Wireless Broadband Router or WirelessGateway.7. Input the Network Key a second time into the “Confirm network key” box.8. Select OK.You are returned to the Wireless Network Connection Properties dialog box and are ableto verify your connection.Note: A 8 – 63 character alphanumeric key-phrase is necessary when usingthe WPA interface. WPA does not require HEX or ASCII notation whichis common with WEP keys. Your WPA enabled device should alreadyhave a 8 – 63 character alphanumeric key-phrase. Consult the informa-tion asked for in Section 4.2.
20 USB Wireless 802.11 b/g AdaptorGlossaryWireless LAN 802.11a/b/g Device 20 TermsContinuedxMAC Address Media Access Control Address. On an 802.11 network the MAC address is used to identify each node of the network. xNetwork Name See SSID. xNetwork Key Network password. xSSID (Service Set Identifier) The unique identifier attached to the header of packets sent over a Wireless Local Area Network (WLAN). The SSID differentiates Wireless LANs from one another. For this reason an SSID must be entered on each wireless device attempting to connect on the WLAN. xStation See Client. xWEP Wired Equivalency Protocol. WEP is an 802.11 encryption standard that provides security for wireless LANs. xWireless LAN A wireless version of Ethernet, the Wireless Local Area Network enables wireless internet access through your SoftAP™ or broadband router. xWireless Network See Wireless LAN. xWPA Wi-Fi Protected Access. WPA is an addition to the security in the 802.11 standard. It is an enhancement to the original security implementation for 802.11 devices. xWPA Personal AES (Advanced Encryption Standard). See WPA. xWPA Personal TKIP (Temporal Key Integrity Protocol). See WPA. GlossaryTermsxAccess Point (AP) A hardware device (possibly a PC) that can act as a communication hub for wireless devices enabling them to connect to a wired LAN (Local Area Network) or to one another. xASCII (American Standard Code for Information Interchange) A code used for encryption that represents letters with numbers. xBroadband Router A device which lets multiple client devices share a single internet connection (like DSL, Cable modem or T1). Generally Broadband Routers offer rudimentary network address translations and firewall features. xClient A device that acquires networking services from another device like another PC or access point. xDNS Server Domain Name System / Service / Server is a service available on the internet that translates domain names into IP addresses. xEncryption The most efficient way to achieve data security online. Encryption is a method of coding data. Generally it is necessary to provide a secret key or password in order to receive decoded information when encrypted. xGateway A gate or entrance into a network. The ISP connecting a home to the internet is generally the gateway in a residence. xHEX A numbering system used in encryption. HEX is a 16 symbol system consisting of the numbers 0 – 9 and A – F. xIP Address An address that identifies devices on a TCP/IP network (eg; 192.168.0.2). xISP (Internet Service Provider) A company that provides access to the internet.
21 USB Wireless 802.11 b/g AdaptorGlossaryContinuedxMAC Address Media Access Control Address. On an 802.11 network the MAC address is used to identify each node of the network. xNetwork Name See SSID. xNetwork Key Network password. xSSID (Service Set Identifier) The unique identifier attached to the header of packets sent over a Wireless Local Area Network (WLAN). The SSID differentiates Wireless LANs from one another. For this reason an SSID must be entered on each wireless device attempting to connect on the WLAN. xStation See Client. xWEP Wired Equivalency Protocol. WEP is an 802.11 encryption standard that provides security for wireless LANs. xWireless LAN A wireless version of Ethernet, the Wireless Local Area Network enables wireless internet access through your SoftAP™ or broadband router. xWireless Network See Wireless LAN. xWPA Wi-Fi Protected Access. WPA is an addition to the security in the 802.11 standard. It is an enhancement to the original security implementation for 802.11 devices. xWPA Personal AES (Advanced Encryption Standard). See WPA. xWPA Personal TKIP (Temporal Key Integrity Protocol). See WPA.
22 USB Wireless 802.11 b/g AdaptorGlossary
23 USB Wireless 802.11 b/g AdaptorAppendix A: TroubleshootingAppendix A: Troubleshooting Table 1: Problems Recommended SolutionsMy WPA security settings are notworking properly.Verify that your Network Keys are entered correctly.If the problem persists/////////Reconfigure your wireless network setting to WEP security.I am unable to see my Network name in the Available wireless networks section of the Wireless Network Connection dialog box on my HP PC.Verify your Network name and Secu-rity settings.If the problem persists.............Consult the users manual for your Wireless Gateway or Access Point.I am having difficulty with my VPN connection.Check your VPN server administrator/IT Department for wireless connec-tion support and requirements.Internet Gaming issues For assistance with internet gaming issues please refer to Microsoft inter-net gaming site.
24 USB Wireless 802.11 b/g AdaptorAppendix B: Regulatory NoticesAppendix B: Regulatory NoticesRegulatory NoticesFederal Communication Commission NoticesFederal Communication Commission Interference StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.IMPORTANT NOTE:FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.This device is intended only for OEM integrators under the following conditions:1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and2) The transmitter module may not be co-located with any other transmitter or antenna.As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization.End Product LabelingThis transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users (for example : PC, desktop,mobile device.). The final end product must be labeled in a visible area with the following:Contains TX FCC ID: MXF-U950529GManual Information That Must be IncludedThe OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrate this module.The users manual for OEM integrators must include the following information in a prominent location " IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.Gemtek declares that US model of WUBR-177G (FCC ID: MXF-U950529G) is limited in CH1-CH11 for 2.4G band by specific firmware controlled by the manufacturer and is not user changeable.
25 USB Wireless 802.11 b/g AdaptorAppendix B: Regulatory NoticesEuropean NoticesEC Conformance Declaration This device compliance with the Essential Requirements of the R&TTE Directive of the European Union (1999/5/EC). This equipment meets the following conformance standards: EN 60950 (IEC 60950) - Product Safety EN 300 328 - Technical requirements for 2.4 GHz radio equipment EN 301 893 – Technical requirements for 5GHz radio equipment EN 301 489-1 / EN 301 489-17 - EMC requirements for radio equipment Declaration of Conformity in Languages of the European Community English Hereby, Gemtek Technology Corp, declares that this Radio LAN device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Finnish Valmistaja Gemtek Technology Corp vakuuttaa täten että Radio LAN device tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen. Dutch Hierbij verklaart Gemtek Technology Corp dat het toestel Radio LAN device in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Bij deze Gemtek Technology Corp dat deze Radio LAN device voldoet aan de essentiële eisen en aan de overige relevante bepalingen van Richtlijn 1999/5/EC. French Par la présente Gemtek Technology Corp déclare que l'appareil Radio LAN device est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Swedish Härmed intygar Gemtek Technology Corp att denna Radio LAN device står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG. Danish Undertegnede Gemtek Technology Corp erklærer herved, at følgende udstyr Radio LAN device overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
26 USB Wireless 802.11 b/g AdaptorAppendix B: Regulatory NoticesEuropean NoticesContinuedGerman Hiermit erklärt Gemtek Technology Corp, dass sich dieser/diese/diese Managed Accces Point in Übereinstimmung mit den grundlegenden Anforderungen und den anderen relevanten Vorschriften der Richtlinie 1999/5/EG befindet". (BMWi) Hiermit erklärt Gemtek Technology Corp die Übereinstimmung des Gerätes RLAN device mit den grundlegenden Anforderungen und den anderen relevanten Festlegungen der Richtlinie 1999/5/EG. (Wien) Greek ƮƧ ƵƩƯ ƲƣƳƱƶƴƣ LITE-ON Technology Corp ƦƩƭƺƯƧƫ ƱƵƫ RLAN device ƴƶƮƮƱƳƷƺƯƧƵƣƫ ƲƳƱƴ Ƶƫƴ ƱƶƴƫƺƦƧƫƴ ƣƲƣƫƵƩƴƧƫƴ Ƭƣƫ Ƶƫƴ ƭƱƫƲƧƴ ƴƸƧƵƫƬƧƴƦƫƣƵƣưƧƫƴ ƵƩƴ ƱƦƩƥƫƣƴ 1999/5/ƧƬItalian Con la presente Gemtek Technology Corp dichiara che questo Radio LAN device è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. Spanish Por medio de la presente Gemtek Technology Corp declara que el Radio LAN device cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Portuguese Gemtek Technology Corp declara que este Radio LAN device está conforme com os requisitos essenciais e outras disposições da Directiva 1999/5/CE. Malti Hawnhekk, Gemtek Technology Corp, jiddikjara li dan RLAN device jikkonforma mal-ŧtišijiet essenzjali u ma provvedimenti oŧrajn relevanti li hemm fid-Dirrettiva 1999/5/EC Estonian Käesolevaga kinnitab Gemtek Technology Corp seadme RLAN device vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele. Hungarian Alulírott, Gemtek Technology Corp nyilatkozom, hogy a RLAN device megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak. Slovak Gemtek Technology Corp týmto vyhlasuje, že RLAN device spēěa základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES. Czech Gemtek Technology Corp tímto prohlašuje, že tento RLAN device je ve shodď se základními požadavky a dalšími pĢíslušnými ustanoveními smďrnice 1999/5/ES. Slovene Šiuo Gemtek Technology Corp deklaruoja, kad šis RLAN device atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Lithuanian Šiuo Gemtek technology Corp deklaruoja, kad šis RLAN device atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.
27 USB Wireless 802.11 b/g AdaptorAppendix B: Regulatory NoticesLatvian Ar šo Gemtek Technology Corp deklarř, ka RLAN device atbilst Direktūvas1999/5/EK bƈtiskajœm prasūbœm un citiem ar to saistūtajiem noteikumiem. IC CAUTION IC statement: Operation is subject to the following two conditions : (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This device has been designed to operate with an antenna having a maximum gain of 0 dBi. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms.IMPORTANT NOTE:IC Radiation Exposure Statement:This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
28 USB Wireless 802.11 b/g AdaptorAppendix C: Product SpecificationsAppendix C: Product SpecificationsModel Number WUBR177GFunctional CriteriaData Rate Up to 54 MbpsOperating Range 802.11b/g: 30m (indoor), 200 m (outdoor)Radio SignalModulation Orthogonal Frequency DivisionMultiplexing (OFDM)Operating Frequency USA (FCC), Canada (IC):802.11b/g: 2412~2462 MHz (Ch1~Ch11)Europe (ETSI):802.11b/g : 2412~2472 MHz (Ch1~Ch13)Operating Channel USA, Canada: 11 Channels (802.11b/g)Europe: 13 Channels (802.11b/g)Physical CharacteristicsPower Consumption TX: 350/305mA Max in 802.11b/g mode RX: 145 mA Max in 802.11b/g modeDimensions 4.5x 1.25 x1.25 in. Antenna External AntennaLED Indicator No LED IndicatorHost Interface USB specification v.2.0Standards ConformanceWireless Standard IEEE 802.11 b/g, Wi-Fi, WPA
29 USB Wireless 802.11 b/g AdaptorAppendix C: Product SpecificationsEnvironmentalTemperature Operating: 0 to 55 C (32 to 131 F)Storage: -20 to 75 C (-4 to 167 F)Humidity 5 to 90% (non-condensing)CertificationEmissions EN 55022 Class BEN 61000-4-2/3/4/6/11FCC Part 15 (B)Safety EN60950ETSI EN300328, EN301893, EN301489Software DriversNDIS Drivers Windows XP Professional SP2Antenna SpecificationAntenna Type External AntennaFrequency Band 2.4 ~ 2.4835GHzPolarization VerticalConnector Reverse SMA ConnectorGain 802.11b/g: 0dBiRadiation Omni-directionalModel Number WUBR177G
30 USB Wireless 802.11 b/g AdaptorIndexIndex802.11 1, 5, 8, 28, 29AAccess Point 19, 23AES 5, 19Antenna 3, 4, 5,,7, 9, 24, 28, 29ASCII 11, 17, 19BBroadband Router 17, 19CClient 10EEncryption 5, 6, 8, 11,17, 19GGateway 10, 17, 19, 23HHEX 11, 17, 19IInstallation 5, 7, 24KKey 15key 6, 17, 19NNetwork 5, 6, 9, 10, 11, 12, 13, 14, 15, 17, 18, 19, 23Network Key 10, 11, 12, 15, 17, 18, 19, 21Network Name 12, 13, 17, 21Network Security 15, 18Ssecurity 5, 6WWireless Network 9, 10, 11, 13, 14, 15, 16, 17, 18, 19, 21, 23WLAN 5WPA 5, 6, 8, 10, 11, 12, 15, 18, 19, 23, 28WPA2 5WPA-PSK 12, 19

Navigation menu