GemTek Technology WIXFBR-131 2.5GHz WiMAX/WiFi CPE User Manual 006150 0001 HUBQSG MECH CLEAR indd

Gemtek Technology Co., Ltd. 2.5GHz WiMAX/WiFi CPE 006150 0001 HUBQSG MECH CLEAR indd

User Man_MXF-WIXFBR-131

006150_0001_HUBQSG_MECH_CLEAR.indd10-5-2011 2:01 PM DPA Lucas Svaren ReleasedStudio Mechanical10/5/11 Laser 89.07%03VB&P JobClientMats close1st insertTitleColor/B&WLiveTrimBleedGutterScalePubs006150_0001CLEARNoneNoneHUB QSR4CNone17.5" x 5.8"17.75" x 6.05"None1" = 1"NoneJob info• White type prints KO• Green type prints PMS 375 C• Images print 4C• Background prints PMS326C/Gradient Blend• Dashed Lines indicates to Folds - Do not PrintProduction notesArt DirectorCopywriterDesignerCreative DirAccount MgrPrint ProdProject MgrStudio MgrBuddy CheckProofreaderWarneBrownNoneNoneMcMullanNoneJen DoanApprovalsFonts Gotham (Book, Black, Medium, Ultra)Gotham Rounded (Bold)Compatil Text LT Com (Regular)Images HUB_QSRT.ai006150_0001_HubQSGBKG_CLEAR.psd (CMYK; 300 ppi)HUB_QSR_Images.tif (CMYK; 300 ppi)Fonts & Images VENABLES BELL & PARTNERS www.venablesbell.com415-288-3300201 Post Street San Francisco CA 94108Fonts in .ai fi leGothamBookGotham BlackGothamMediumGothamRoundedBoldfafdsffjdklsajfl sd;S:17.5"S:5.8"T:17.5"T:5.8"B:17.75"B:6.05"
006150_0001_HUBQSG_MECH_CLEAR.indd10-5-2011 2:01 PM DPA Lucas Svaren ReleasedStudio Mechanical10/5/11 Laser 89.07%03VB&P JobClientMats close1st insertTitleColor/B&WLiveTrimBleedGutterScalePubs006150_0001CLEARNoneNoneHUB QSR4CNone17.5" x 5.8"17.75" x 6.05"None1" = 1"NoneJob info• White type prints KO• Green type prints PMS 375 C• Images print 4C• Background prints PMS326C/Gradient Blend• Dashed Lines indicates to Folds - Do not PrintProduction notesArt DirectorCopywriterDesignerCreative DirAccount MgrPrint ProdProject MgrStudio MgrBuddy CheckProofreaderWarneBrownNoneNoneMcMullanNoneJen DoanApprovalsFon ts NoneImages NoneFonts & Images VENABLES BELL & PARTNERS www.venablesbell.com415-288-3300201 Post Street San Francisco CA 94108S:17.5"S:5.8"T:17.5"T:5.8"B:17.75"B:6.05"
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only. Due to the essential high output power natural of WiMAX device, use of this device with other transmitter at the same time may exceed the FCC RF exposure limit and such usage must be prohibited (unless such co-transmission has been approved by FCC in the future).

Navigation menu