Sim Mechanical15 Matrix
2016-06-08
: Guides Sim Mechanical15 Matrix sim_mechanical15_matrix products pdf asi
Open the PDF directly: View PDF 
.
Page Count: 3
Autodesk® Inventor®
Professional 2015
Autodesk® Simulation
Mechanical 2015
Autodesk® Nastran® Solver (Optional)
Linear Static Stress
Modal
Critical Buckling
Steady State Thermal
Thermal Stress
PREPROCESSING
Direct Modeling with Inventor Fusion
Defeaturing with Inventor Fusion
Inventor Parameters
8,000+ Materials in the Library
2D, Beam and Plate Modeling
Automatic Surface Meshing
Automatic Tetrahedral Meshing
Automatic Hexa-dominant Meshing
Automatic Midplane Meshing
Pressure Vessel Design and Meshing
CONTACT MODELING
Rigid Bonding
Butt Welds
Surface Contact with Friction
Sliding Contact Without Separation
Separation Contact Without Sliding
Shrink Fit Contact (With or Without Sliding)
Thermal Contact
HEAT TRANSFER
Steady-state Heat Transfer
Transient Heat Transfer
Autodesk® Simulation Mechanical 2015 vs. Autodesk® Inventor® Professional 2015
Comparison matrix
Comparison matrix Autodesk® Simulation Mechanical 2015
Autodesk® Inventor®
Professional 2015
Autodesk® Simulation
Mechanical 2015
LINEAR STRUCTURAL
Static Stress
Fatigue
Natural Frequency (Modal)
Modal with Load Stiffening
Response Spectrum
Random Vibration
Frequency Response
Transient Stress
Critical Buckling Load
Dynamic Design Analysis Method
NONLINEAR STRUCTURAL
Large Displacement
Nonlinear Material Models
Flexible and Rigid Body Motion
Nonlinear Buckling
Dynamic Nonlinear Analysis (MES)
MULTIPHYSICS
Thermal-structural Coupling
Fluid-thermal Coupling
Fluid-structural Coupling
Electrostatics
Joule-heating Effect
Moldflow Interoperability
Comparison matrix Autodesk® Simulation Mechanical 2015
Autodesk, the Autodesk logo, Autodesk Inventor, and Inventor are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or aliates
in the USA and/or other countries. Nastran is a registered trademark of the National Aeronautics Space Administration. All other brand names, product names,
or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specifications and pricing at any time
without notice, and is not responsible for typographical or graphical errors that may appear in this document. © 2014 Autodesk, Inc. All rights reserved.
Autodesk® Inventor®
Professional 2015
Autodesk® Simulation
Mechanical 2015
POST PROCESSING
Contour Display
Vector Display
Isoline and Isosurface Display
Custom Result Types
Stress Linearization
Slice Planes
Mirror Planes
3D Model Visualization for 2D, Plate, and Beam
Customizable Presentations
Animations
Image and CSV File Export
Custom Reporting (PDF, HTML, Word)
GENERAL
Parallel Windows Solvers
Autodesk® Vault Data Management PDM Interoperability
Recurdyn Interoperability
