HI LINK ELECTRONIC HLK-M30 WIFI module User Manual

ShenZhen HaiLingKe Electronic co.,Ltd. WIFI module HLK M30 DataSheet

a href="https://usermanual.wiki/HI-LINK-ELECTRONIC" itemprop="url"> HI LINK ELECTRONIC >

User Manual

                                                                HLK-M30 Data Sheet                                             HLK-M30-DS V1.0 7/30/2014   Overview: HLK-M30 is a new low-cost embedded UART-WIFI module (serial port -Wireless) developed by Shenzhen HaiLingKe  Electronic co., Ltd. This product is an embedded module based on the universal serial interface network standard,built-in TCP / IP protocol stack, enabling the user serial port,wireless network (wifi) interface between the onversions.Through the HLK-M30 module, the traditional serial devices do not need to change any configuration,userdata can be transmitted through the Internet network. Provide a quick solution for the user’s serial devices to transfer data via WIFI Module Block Diagram                                          Applications  • WiFi Led Control   • WiFi Power Switch   • Smart Home;Smart Buliding • OBDII WiFi Diagnose   • RFID Data Transfer   • Toys and Gaming Peripherals   • Industrial Systems   • Telemetry   • Remote Control    Benefits  • Low Power consumption • Ready to use in products   • Minimizes product development   • No RF test required for systems   • Serial to Wifi; Smart;Small; • Support Smart Connection   • Transparent Transmission • Serial to Wifi; Smart;Small; • Compliant with CE and FCC  Features:  • 2.4GHz 802.11b/g/n,compatible  • WiFi Sta/Soft AP Mode • Support Smart Connection • The range of baudrate: 1200~115200bps • Support transparent transmission mode • Support multiple security authenti-cation mechanisms: WEP64/WEP128/ TKIP/ AES WEP/WPA-PSK/WPA2-PSK • Support wireless roam • Support multiple network protocols: TCP/UDP/ /DHCP/DNS • Support AT instruction Set • Device Dimensions 16.3mm*14mm* 2.24mm   Lead-free and RoHS compliant
                                                                HLK-M30 Data Sheet                                             HLK-M30-DS V1.0 7/30/2014    1. Introduction   The HLK-M30 module provides designers with a ready made component that provides a fully integrated solution for applications, using the IEEE802.11 standard in the 2.4-2.5GHz ISM frequency band, including802.11b/g/n, can be quickly and easily included in product designs. The modules integrate all of the RF components required, removing the need to perform expensive RF design and test. Products can be designed by simply connecting sensors and switches to the module IO pins or uart interface. The modules use MTK’s chip Wireless Microcontroller, allowing designers to make use of the serial interface to connect with their device. Hence, this module allows designers to bring wireless applications to market in the minimum time with significantly reduced development effort and cost.   The HLK-M30 is an embedded module based on the universal serial interface network standard,built-in TCP / IP protocol stack, enabling the user serial port, wireless network (wifi) interface between the conversions. Through the HLK-M30 module, the traditional serial devices do not need to change any configuration; data can be transmitted through the Internet network. Provide a quick solution for the user’s serial devices to transfer data via Ethernet Also the HLK-M30 module have FCC modular approvals and is compliant with EU regulations.   2. Specifications   The parameters are defined here.   VDD=3.3V @ +25°C   Typical DC Characteristics   Notes RX Active, HT40, MCS7 150mA   802.11.n TX HT40, MCS7 @15dBm 210mA 802.11.n Typical RF Characteristics Notes Receive sensitivity    -70dBm(802.11n)  Use IQview to adjust Maximum Transmit power    18dBm/15dBm/13.5dBm   802.11b/g/n RF Port impedance – Ipex onnector  50 ohm    2.4 - 2.5GHz   VSWR (max)    2:1    2.4 - 2.5GHz   Centre frequency accuracy    +/-25ppm    Additional +/-15ppm allowance   Peripherals Notes UART 2pins  1200-115200kbps GPIO 5pins  GPIO VCC  2pins  3.3V+/-10% Two VCC should all connect to powerAN 4pins  Analog GND 23pins  GND
Download:
Mirror Download [FCC.gov]
Document ID2521873
Application IDOoEeQfDVUxHwgUfCyQGOBg==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize21.59kB (269885 bits)
Date Submitted2015-02-03 00:00:00
Date Available2015-02-03 00:00:00
Creation Date2017-10-19 01:17:17
Producing SoftwareGPL Ghostscript 9.18
Document Lastmod2017-10-19 01:17:17
Document TitleMicrosoft Word - HLK-M30 DataSheet.doc
Document CreatorPScript5.dll Version 5.2.2
Document Author: Administrator
FCC ID Filing: 2AD56HLK-M30

Navigation menu