HTC LIBR100 Smart Phone with Bluetooth User Manual Book Libra Generic English Manual indb

HTC Corporation Smart Phone with Bluetooth Book Libra Generic English Manual indb

1. User Manual 1 of 2
2. User Manual 2 of 2

User Manual 1 of 2

Download:
Mirror Download [FCC.gov]
Document ID	783202
Application ID	1SRoMJBw9E0zp0dfLNt2NA==
Document Description	User Manual 1 of 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	304.03kB (3800358 bits)
Date Submitted	2007-04-20 00:00:00
Date Available	2007-10-17 00:00:00
Creation Date	2007-04-09 16:39:48
Producing Software	Adobe PDF Library 6.0
Document Lastmod	2007-04-09 16:39:59
Document Title	Book_Libra_Generic_English_Manual.indb
Document Creator	Adobe InDesign CS (3.0)

Smar
User Manual
2
Please Read Before Proceeding
THIS DEVICE IS NOT FULLY CHARGED WHEN YOU TAKE IT OUT OF THE BOX.
DO NOT REMOVE THE BATTERY PACK WHEN THE DEVICE IS CHARGING.
YOUR WARRANTY IS INVALIDATED IF YOU OPEN OR TAMPER WITH THE DEVICE’S OUTER
CASING.
PRIVACY RESTRICTIONS
Some countries require full disclosure of recorded telephone conversations, and stipulate that you must
inform the person with whom you are speaking that the conversation is being recorded. Always obey the
relevant laws and regulations of your country when using the recording feature of your Pocket PC Phone.
INTELLECTUAL PROPERTY RIGHT INFORMATION
Copyright © 2006 High Tech Computer Corp. All rights reserved.
, ExtUSB are trademarks and/or service marks of High Tech Computer Corp.
Microsoft, MS-DOS, Windows, Windows NT, Windows Server, Windows Mobile, ActiveSync, Excel, Internet
Explorer, MSN, Hotmail, Outlook, PowerPoint, Word, and Windows Media are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other countries.
Bluetooth and the Bluetooth logo are trademarks owned by Bluetooth SIG, Inc.
microSD is a trademark of SD Card Association.
Java, J2ME and all other Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc.
in the United States and other countries.
Copyright © 2006, Adobe Systems Incorporated.
Copyright © 2006, Macromedia Netherlands, B.V.
Macromedia, Flash, Macromedia Flash, Macromedia Flash Lite and Reader are trademarks and/or registered
trademarks of Macromedia Netherlands, B.V. or Adobe Systems Incorporated.
Copyright © 2006, JATAAYU SOFTWARE (P) LTD. All Rights Reserved.
Copyright © 2006, Tao Group Limited. All Rights Reserved.
Copyright © 2006, Tegic Communications. T9 and XT9 are trademarks or registered trademarks of Tegic
Communications. XT9 Mobile Interface is licensed under one or more of the following: U.S. Pat. Nos.5,187,480,
5,818,437, 5,945,928, 5,953,541, 6,011,554, 6,286,064, 6,307,548, 6,307,549, and 6,636,162, 6,646,573,
6,970,599, 6,801,190, 7,030,863, 7,088,345; Australia Pat. Nos.
727539, 746674, 747901; Austria Pat. Nos. AT225534, AT221222; Brazil P.I. No. 9609807-4; Canada Pat.
Nos. 1,331,057, 2,227,904, 2,278,549, 2,302,595; Japan Pat. Nos. 3532780, 3492981; United Kingdom Pat.
No. 2238414B; Hong Kong Standard Pat. No. HK1010924; Republic of Singapore Pat. Nos. 51383, 66959,
71976, 89076; European Pat. Nos. 0 842 463 (96927260.8), 1 010 057 (98903671.0), 1 018 069 (98950708.2);
Republic of Korea Pat. Nos. KR201211B1, KR226206B1, 402252, 552085; People’s Republic of China Pat. No.
ZL96196739.0; Mexico Pat. Nos. 208141, 216023, 218409; Russian Federation Pat. Nos. 2206118, 2214620,
2221268; New Zealand Pat. No. 519928; and additional patents are pending worldwide.
Licensed by QUALCOMM Incorporated under one or more of the following patents:
4,901,307
5,109,390
5,267,262
5,416,797
5,490,165
5,511,073
5,568,483
5,056,109
5,228,054
5,337,338
5,504,773
5,535,239
5,659,569
5,101,501
5,710,784
5,600,754
5,778,338
5,267,261
5,414,796
5,506,865
5,544,196
5,657,420
3
ArcSoft MMS Composer™ Copyright © 2003-2006, ArcSoft, Inc. and its licensors. All Rights Reserved. ArcSoft &
the ArcSoft logo are registered trademarks of ArcSoft, Inc. in the United States and/or other countries.
All other company, product and service names mentioned herein are trademarks, registered trademarks or
service marks of their respective owners.
HTC shall not be liable for technical or editorial errors or omissions contained herein, nor for incidental or
consequential damages resulting from furnishing this material. The information is provided “as is” without
warranty of any kind and is subject to change without notice. HTC also reserves the right to revise the content
of this document at any time without prior notice.
No part of this document may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying, recording or storing in a retrieval system, or translated into any
language in any form without prior written permission of HTC.
4
Important Health Information and Safety Precautions
When using this product, the safety precautions below must be taken to avoid possible legal liabilities and
damages.
Retain and follow all product safety and operating instructions. Observe all warnings in the operating
instructions on the product.
To reduce the risk of bodily injury, electric shock, fire and damage to the equipment, observe the following
precautions.
ELECTRICAL SAFETY
This product is intended for use when supplied with power from the designated battery or power supply unit.
Other usage may be dangerous and will invalidate any approval given to this product.
SAFETY PRECAUTIONS FOR PROPER GROUNDING INSTALLATION
CAUTION – Connecting to an improperly grounded equipment can result in an electric shock to your device.
This product equipped with a USB Cable for connecting with desk-top or notebook computer. Be sure your
computer is properly grounded (earthed) before connecting this product to the computer. The desk-top
or notebook computer is equipped with a power supply cord having an equipment grounding conductor
and a grounding plug. The plug must be plugged into an appropriate outlet which is properly installed and
grounded in accordance with all local codes and ordinances.
SAFETY PRECAUTIONS FOR POWER SUPPLY UNIT
• Use the correct external power source
A product should be operated only from the type of power source indicated on the electrical ratings label.
If you are not sure of the type of power source required, consult your authorized service provider or local
power company. For a product that operates from battery power or other sources, refer to the operating
instructions that are included with the product.
• Handle battery packs carefully
This product contains a Li-Ion or Li-Ion Polymer battery. There is a risk of fire and burns if the battery
pack is handled improperly. Do not attempt to open or service the battery pack. Do not disassemble,
crush, puncture, short external contacts or circuits, dispose of in fire or water, or expose a battery pack to
temperatures higher than 60˚C (140˚F).
WARNING!
Danger of explosion if battery is incorrectly replaced. To reduce risk of fire or burns, do not
disassemble, crush, puncture, short external contacts, expose to temperature above 60oC (140oF),
or dispose of in fire or water. Replace only with specified batteries. Recycle or dispose of used
batteries according to the local regulations or reference guide supplied with your product.
SAFETY PRECAUTIONS FOR DIRECT SUNLIGHT
Keep this product away from excessive moisture and extreme temperatures. Do not leave the product or
its battery inside a vehicle or in places where the temperature may exceed 60°C (140°F), such as on a car
dashboard, window sill, or behind a glass that is exposed to direct sunlight or strong ultraviolet light for
extended periods of time. This may damage the product, overheat the battery, or pose a risk to the vehicle.
5
SAFETY PRECAUTIONS OF HEARING LOSS
CAUTION –Permanent hearing loss may occur if earphones or headphones are used and prolonged listening
at high volume.
SAFETY IN AIR CRAFTS
Due to the possible interference caused by this product to an aircraft’s navigation system and its
communications network, using this device’s phone function on board an airplane is against the law in most
countries. If you want to use this device when on board an aircraft, remember to turn off your phone by
switching to Flight Mode.
ENVIRONMENT RESTRICTIONS
Do not use this product in gas stations, fuel depots, chemical plants or where blasting operations are in
progress, or in potentially explosive atmospheres such as fuelling areas, fuel storehouses, below deck
on boats, chemical plants, fuel or chemical transfer or storage facilities, and areas where the air contains
chemicals or particles, such as grain, dust, or metal powders. Please be aware that sparks in such areas could
cause an explosion or fire resulting in bodily injury or even death.
EXPLOSIVE ATMOSPHERES
When in any area with a potentially explosive atmosphere or where flammable materials exist, the product
should be turned off and the user should obey all signs and instructions. Sparks in such areas could cause
an explosion or fire resulting in bodily injury or even death. Users are advised not to use the equipment at
refueling points such as service or gas stations, and are reminded of the need to observe restrictions on the
use of radio equipment in fuel depots, chemical plants, or where blasting operations are in progress. Areas
with a potentially explosive atmosphere are often, but not always, clearly marked. These include fueling areas,
below deck on boats, fuel or chemical transfer or storage facilities, and areas where the air contains chemicals
or particles, such as grain, dust, or metal powders.
ROAD SAFETY
Vehicle drivers in motion are not permitted to use telephony services with handheld devices, except in the
case of emergency. In some countries, using hands-free devices as an alternative is allowed.
SAFETY PRECAUTIONS FOR RF EXPOSURE
• Avoid using your device near metal structures (for example, the steel frame of a building).
• Avoid using your device near strong electromagnetic sources, such as microwave ovens, sound
speakers, TV and radio.
• Use only original manufacturer-approved accessories, or accessories that do not contain any metal.
• Use of non-original manufacturer-approved accessories may violate your local RF exposure guidelines
and should be avoided.
INTERFERENCE WITH MEDICAL EQUIPMENT FUNCTIONS
This product may cause medical equipment to malfunction. The use of this device is forbidden in most
hospitals and medical clinics.
If you use any other personal medical device, consult the manufacturer of your device to determine if it
is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this
information.
Turn the phone OFF in health care facilities when any regulations posted in these areas instruct you to do so.
Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
6
HEARING AIDS
Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may
want to consult your service provider, or call the customer service line to discuss alternatives.
NONIONIZING RADIATION
This product should be operated in the suggested normal condition only to ensure the radiative performance
and safety of the interference. As with other mobile radio transmitting equipment, users are advised that for
satisfactory operation of the equipment and for the safety of personnel, it is recommended that no part of the
human body be allowed to come too close to the antenna during operation of the equipment.
General Precautions
• Heed service markings
Except as explained elsewhere in the Operating or Service documentation, do not service any product
yourself. Service needed on components inside the device should be done by an authorized service technician
or provider.
• Damage requiring service
Unplug the product from the electrical outlet and refer servicing to an authorized service technician or
provider under the following conditions:
• Liquid has been spilled or an object has fallen into the product.
• The product has been exposed to rain or water.
• The product has been dropped or damaged.
• There are noticeable signs of overheating.
• The product does not operate normally when you follow the operating instructions.
• Avoid hot areas
The product should be placed away from heat sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
• Avoid wet areas
Never use the product in a wet location.
• Avoid using your device after a dramatic change in temperature
When you move your device between environments with very different temperature and/or humidity ranges,
condensation may form on or within the device. To avoid damaging the device, allow sufficient time for the
moisture to evaporate before using the device.
NOTE
When taking the device from low-temperature conditions into a warmer environment or from high-temperature
conditions into a cooler environment, allow the device to acclimate to room temperature before turning on the
power.
• Avoid pushing objects into product
Never push objects of any kind into cabinet slots or other openings in the product. Slots and openings are
provided for ventilation. These openings must not be blocked or covered.
• Mounting Accessories
Do not use the product on an unstable table, cart, stand, tripod, or bracket. Any mounting of the product
should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the
manufacturer.
7
• Avoid unstable mounting
Do not place the product with an unstable base.
• Use product with approved equipment
This product should be used only with personal computers and options identiﬁed as suitable for use with your
equipment.
• Adjust the volume
Turn down the volume before using headphones or other audio devices.
• Cleaning
Unplug the product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning, but NEVER use water to clean the LCD screen.
8
Contents
Chapter 1 Getting Started
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
Getting to Know Your Phone and Its Accessories .................................... 12
Installing a Micro SD Card ......................................................................... 15
The Home Screen ....................................................................................... 15
Status Indicators and Program Icons ....................................................... 16
Using the Start Menu ................................................................................. 17
Using the Quick List ................................................................................... 18
Entering Information ................................................................................. 18
Battery Information ................................................................................... 21
Chapter 2 Using Phone Features
2.1
2.2
2.3
2.4
2.5
29
About ActiveSync ...................................................................................... 30
Setting Up ActiveSync ............................................................................... 30
Synchronizing Information ....................................................................... 32
Synchronizing via Bluetooth .................................................................... 35
Synchronizing Music, Video, and Pictures ............................................... 35
Setting Up E-mail Security ........................................................................ 36
Chapter 4 Managing your Phone
4.1
4.2
4.3
4.4
4.5
4.6
4.7
23
Using the Phone ......................................................................................... 24
Making a Voice Call .................................................................................... 24
Receiving a Voice Call ................................................................................ 26
In-Call Options ........................................................................................... 26
Additional Dialing Information ................................................................ 27
Chapter 3 Synchronizing Information and
Setting Up E-mail Security
3.1
3.2
3.3
3.4
3.5
3.6
11
39
Personalizing your Phone ......................................................................... 40
Adding and Removing Programs ............................................................. 44
Using Task Manager and Managing Memory .......................................... 45
Managing and Backing Up Files ............................................................... 46
Protecting your Phone .............................................................................. 47
Restarting your Phone .............................................................................. 48
Resetting your Phone ................................................................................ 48
9
Chapter 5 Getting Connected
5.1
5.2
5.3
5.4
5.5
Connecting to the Internet ....................................................................... 50
Using Internet Explorer Mobile ................................................................ 51
Using Internet Sharing .............................................................................. 53
Using Comm Manager ............................................................................... 54
Using Bluetooth ......................................................................................... 54
Chapter 6 Exchanging Messages and Using Outlook
6.1
6.2
6.3
6.4
6.5
6.6
6.7
Appendix
79
Using Camera and Video Recorder ........................................................... 80
Using Pictures & Videos ............................................................................. 85
Using Windows Media Player .................................................................... 88
Using Streaming Media ............................................................................. 93
Using MIDlet Manager .............................................................................. 94
Chapter 8 Using Other Applications
8.1
8.2
8.3
61
Using E-mail and Text Messages ............................................................... 62
Using MMS Messages ................................................................................ 67
Using Pocket MSN Messenger .................................................................. 71
Using Calendar ........................................................................................... 72
Using Contacts .......................................................................................... 73
Using Tasks ................................................................................................. 76
Using Voice Notes ...................................................................................... 77
Chapter 7 Experiencing Multimedia
7.1
7.2
7.3
7.4
7.5
49
99
Using Doc Viewer ..................................................................................... 100
Using Speed Dial ...................................................................................... 103
Using Voice Speed Dial ............................................................................ 104
105
A.1 Regulatory Notices .................................................................................. 106
A.2 PC Requirement to Run ActiveSync 4.x .................................................. 110
A.3 Specifications ........................................................................................... 110
Index
113
10
Chapter 1
Getting Started
1.1 Getting to Know Your Phone and Its
Accessories
1.2 Installing a Micro SD Card
1.3 The Home Screen
1.4 Status Indicators and Program Icons
1.5 Using the Start Menu
1.6 Using the Quick List
1.7 Entering Information
1.8 Battery Information
12 Getting Started
1.1 Getting to Know Your Phone and Its Accessories
13
12
11
10
17
18
19
20
21
14
22
15
16
23
24
25
26
Getting Started 13
Item
Function
1. Speaker
Listen to phone call.
2. Light Sensor
Sense dark conditions and activate a backlight under the keypad and the QWERTY keyboard
automatically, glowing in dark.
3. Display Screen
4. NAVIGATION
CONTROL/ENTER
Use to scroll left, right, up, or down. Press the center to use as the ENTER button..
5. Left SOFT KEY
Press to perform the command shown in the label above the button.
6. HOME
Press to go to the Home screen.
7. TALK
Press to dial a phone number or answer a call. Press and hold to activate/deactivate speakerphone mode.
8.
Key
Press to change input modes or press and hold to choose an input mode or symbols from the list.
9.
Key
Press to add a space or press and hold to display a list of symbols.
10. END
Press to end a call, or press and hold to lock the phone keypad and the keyboard.
11. BACK
Press to go back to the previous screen, or backspace over characters.
12. Right SOFT KEY
Press to perform the command shown in the label above the button.
13. LED Indicators
The left LED indicator (green/red/amber) notifies you of the battery and network status of your phone,
while the right LED indicator (blue) notifies you of Bluetooth connectivity status. For more information
about LED Indicators, see the table at the end of this section.
14. POWER
Press to turn on (more than 1 second) and off the phone. Or press and quickly release the POWER button
to display the Quick List, which allows you to change profiles, open Comm Manager, and enable/disable
key lock and enable/disable device lock.
15. Volume
Adjustment Slider
Slide this up or down to increase or decrease the earpiece volume during a call. Drag and hold the slider
down to launch Voice Speed Dial and record voice tags.
16. microSD Slot
Insert a microSD memory card for storing data.
17. Back Cover
Remove to insert or replace battery.
18. Speaker
Listen to audio media or phone call when using speakerphone mode.
19. Camera lens
20. Car Antenna
Connector
Connect your phone to the car antenna while in a car to have better reception quality.
21. Self-Portrait Mirror
Turn the back side of your phone to face yourself so that your image reflects on the mirror when taking
self-portrait shots.
22. CAMERA
Press to open the Camera program. If already running, press to capture an image or start recording a
video clip.
23. Battery Cover
Latch
Slide this latch to release the battery cover.
24. Microphone
Speak into the microphone when receiving or making a phone call or during voice recording.
25. Sync Connector/
Earphone Jack
Use for synchronizing data, recharging the battery, connecting the earphone to listen to audio media, or
connecting the phone’s hands-free kit.
26. Strap Holder
Attach a strap for carrying your device.
14 Getting Started
LED indicator lights
Various colors that might display in the two LED Indicators are summarized here.
Top LED
Status
Solid green
Battery is fully charged.
Blank
Battery case is empty or the phone is off.
Solid amber
Battery is charging or the phone is using ActiveSync to synchronize with a PC.
Solid red
Battery is not installed or battery is over-discharged.
Flashing green
Connected to the network.
Flashing red
Battery very low (less than 10%).
Flashing amber
Battery temperature is hotter or colder than the functional limits of 0 to 48 degrees Celsius (32 to 118
degrees Fahrenheit), and has stopped charging.
Amber/Green
LED off
Battery fault. The “Battery Fault” indicator
( ) is displayed. In this case, the flashing green LED can be recovered by unplugging the AC adapter.
Bottom LED
Status
Flashing blue
Bluetooth mode set to “On” or “Visible” mode.
Accessories
The following accessories are provided with the phone:
Accessory
Function
1. AC Adapter
Recharges the battery.
2. USB Sync Cable
Connects your device to a PC and synchronizes data.
3. Mini-USB Stereo
Headset
Provides a volume control slider and a Send/End button. Press the Send/End button to pick up a
call or put a call on hold; press and hold the button to end the call.
4. Pouch
Comes with belt clip. Store your device in the pouch to keep it away from dust and scratches..
5. One-to-two YSplitter Cable
Lets you connect the supplied AC adapter and a standard 2.5mm stereo headset to your device
at the same time.
6. One-to-two
Splitter Adapter
Lets you connect the supplied AC adapter and mini-USB stereo headset to your device at the
same time.
Getting Started 15
1.2 Installing a Micro SD Card
You can install a Micro SD (Secure Digital) card in your phone to have an alternative storage place for your
images, video, music, and other phone data.
To install the microSD card
• Insert the microSD card into the slot with its gold
contacts facing up.
To remove, press the microSD card to pop it out
of the slot.
1.3 The Home Screen
The Home screen displays important information, such as upcoming appointments, status indicators, the
current date, time, and profile, and icons of programs that you have recently used. You can open a program
directly by selecting its icon and pressing ENTER.
• To access the Home screen from anywhere, press HOME.
• To customize the Home screen display, including the background, click Start > Settings > Home
Screen.
1.
Select a recently-used program, and open it directly
from the Home screen.
2.
Displays the name of your wireless service provider,
date, and the time.
Click to open Comm Manager.
3.
Click to view the details of a missed call.
4.
Click to view the details of your next appointment.
5.
Displays the current Profile being used.
Click to change the current Profile.
6.
Displays the new messages that you have received.
Click to open the Messages folder.
7.
Click to display all program icons.
8.
Displays notifications, such as missed calls or new
messages.
9.
Displays the available network or connectivity status.
10
11
12
10. Displays the location settings.
11. Displays the power status.
12. Displays the network signal strength.
13. Click to open Contacts, Call History, or Messages.
13
Home Screen
16 Getting Started
1.4 Status Indicators and Program Icons
The following table lists common status indicators with their description.
Icon Description
New e-mail or text message (SMS, Short
Message Service)
Roaming
New MSN Messenger message
Incoming voice call
Voice call in progress
Data call in progress
Icon Description
1xRTT available (1xRTT, 1 times Radio Transmission Technology, is
the third-generation data service)
1xRTT connected
ActiveSync over 1xRTT in use
EVDO available (EVDO, Evolution Data Optimized, is a high speed
data service for wireless broadband and quick Internet access)
EVDO connected
ActiveSync over EVDO in use
Missed call
Lowercase text input
Battery level
Uppercase text input
Low battery
All Caps text input
Very low battery
T9 text input mode, lowercase
Battery charging
T9 text input mode, uppercase
No battery or battery fault
T9 text input mode, caps lock
Signal strength
Numeric input mode
Radio connected or no signal
Radio off
Ringer off
Speakerphone on
Voice privacy currently unavailable
Vibrate call alert
Location settings configured to broadcast your location only
during a 911 call
Location settings configured to broadcast your location at all times
Bluetooth On or Visible mode
Voice privacy available and turned on
Sync error
Microphone muted
The following table lists icons of the programs that are already installed on your phone.
Icon
Program
Description
ActiveSync
Synchronizes information between your phone and a PC.
Adobe Reader LE
Enables you to view PDF (Portable Document Format) files on your phone.
Calculator
Performs basic arithmetic and calculations, such as addition, subtraction,
multiplication, and division.
Calendar
Keeps track of your appointments, and creates meeting requests.
Call History
Keeps track of all phone calls made, received, and missed.
Camera
Captures photos in various modes.
Clear Storage
Clears memory, restores the phone back to factory default settings, then restarts the phone.
ClearVue Document
Lets you view Word documents on your phone.
ClearVue Presentation Lets you view PowerPoint files on your phone.
ClearVue Worksheet
Lets you view Excel worksheets on your phone.
Comm Manager
Lets you easily enable or disable your phone, start or stop synchronization with your
computer, mute your phone, enable or disable Bluetooth, stop data services and
enable or disable Direct Push.
Contacts
Keeps track of contact information.
Getting Started 17
Icon
Program
Description
Download Agent
Provides information about download status and the downloaded content from the Internet.
File Explorer
Lets you organize and manage files and folders on your phone.
Games
Lets you play two games: Bubble Breaker and Solitaire come with your phone.
Internet Explorer
Allows you to browse Web and WAP sites, and to download new programs and files
from the Internet.
Internet Sharing
Lets your phone act as an external modem for your computer by using USB port or Bluetooth.
Messaging
Lets you send and receive e-mails, MMS and text messages.
MIDlet Manager
Lets you download and install Java-based applications, such as games and tools, on
your phone.
Pictures & Videos
Collects, organizes, and sorts media files in the My Pictures folder on your phone or on
a storage card.
Pocket MSN
Lets you send and receive instant messages with your MSN Messenger contacts.
Settings
Personalize your phone to suit the way you use it.
Speed Dial
Lets you create speed dial entries for dialing frequently-called phone numbers or for
opening frequently-accessed programs.
Streaming Media
Allows you to stream live or on-demand video.
Task Manager
Keeps track of all programs currently running on your phone..
Tasks
Keeps track of your tasks.
Video Recorder
Captures video clips in various modes and duration.
Voice Notes
Allows you to create short voice recordings.
Voice Speed Dial
Lets you open a program or call a contact using voice recognition.
Windows Media Player Lets you play back video and audio files.
1.5 Using the Start Menu
The Start menu is located at the bottom-left corner of the Home screen and displays various program icons
that are spread across one or more screens.
To see the available programs in the Start menu
On the Home screen, click Start. To see more
programs, click More or use the NAVIGATION
CONTROL.
Your phone comes with several bundled programs
that you can start using immediately. You can also
install additional programs from the included
Windows Mobile® Getting Started Disc or from the
Internet, or purchase mobile phone software from
retail stores and install them on your phone.
Start menu
18 Getting Started
1.6 Using the Quick List
The Quick List offers convenient access to a list of functions, such as locking your phone, and keyboard,
opening Comm Manager, and choosing a different profile. For more information about profiles, see Chapter 4.
To access the Quick List
1. Brieﬂy press (press and quickly release) the POWER button. Please note that pressing and holding the
POWER button turns oﬀ the phone.
2. Scroll through the list and select the desired option. Then, do any of the following:
• Click Select.
• Press ENTER.
• Press the corresponding number on the QWERTY keyboard.
3. To exit the Quick List at any time, click Cancel.
1.7 Entering Information
You can enter text, numbers, and symbols using the phone dialing keypad as well as from the sliding QWERTY
keyboard. When you select a field that requires entering text or numbers, the phone automatically selects the
appropriate input mode. The status indicator on the top-right corner of the display screen shows the input
mode that you are currently using.
The phone supports three input modes for entering text and numbers: Multipress, T9 and Numeric.
Multipress and T9 modes are used for entering text, while Numeric mode is used for entering numbers.
Multipress text input mode, lowercase
Multipress text input mode, uppercase
Multipress text input mode, caps lock
T9 text input mode, lowercase
T9 text input mode, uppercase
T9 text input mode, caps lock
Numeric input mode
To change the input mode
1. Press and hold the
key.
2. On the menu, click the input mode you want.
Use Multipress mode
In Multipress mode, you can enter a character by pressing the numeric key on which the character appears.
To enter text in Multipress mode
• To enter the ﬁrst character on the numeric key, press once. To enter the second character on the
numeric key, press twice and so on.
• To enter a character that is on the same numeric key, pause after you enter the ﬁrst character.
• To enter punctuation, press the 1 key repeatedly until you see the punctuation you want.
Getting Started 19
To change the Multipress time out
You can change the length of time to pause between key presses on the same numeric key.
1. On the Home screen, click Start > Settings > Accessibility.
2. In Multipress time out, select the length of the pause between key presses.
Use T9 mode
To form a word in T9 mode, press the numeric keys on the phone keypad as well as on the QWERTY keyboard
that contain the letters you want. As you enter letters, T9 analyzes your key presses and attempts to complete
the word. For example, to enter the word “shoe”, press 7, 4, 6, 3.
To enter text in T9 mode
1. Press and hold the
key.
2. On the menu, click T9 [Language].
3. Do any of the following:
• Enter letters by pressing the keys on which the letters appear. Press a key only once for each letter.
If there is more than one choice in the T9 dictionary for your entry, a list of available words is
displayed.
key to enter a space after the word is entered, or click one of the available words and
• Press the
the space is added automatically.
• If you do not see the desired word, click Add Word? from the list, and then enter the word using
Multipress.
• To enter punctuation, press the 1 key and select from a list of common punctuation marks.
Use Numeric mode
If a text box permits a numeric entry only, such as a phone number, the input mode automatically defaults to
Numeric mode. However, if you need to enter numbers within a line of text, change to Numeric mode, and
then change back to Multipress or T9 mode to finish entering the text.
To enter numbers in text boxes
1. Press and hold the
key to change to Numeric mode.
2. On the keypad, enter the number or numbers you want.
3. Change back to Multipress or T9 input mode by pressing and holding the
entering your text.
key, and then ﬁnish
More text entry tasks
In both Multipress and T9 modes, the first letter of a sentence is by default capitalized.
To change between uppercase, lowercase and caps lock
• Press the
key to change between uppercase, lowercase and caps lock within a text input mode.
To delete characters
• To backspace and delete a single character in any input mode, press BACK or Del (on the QWERTY
keyboard).
• To backspace and delete an entire text or numeric ﬁeld in any input mode, press and hold BACK or Del
(on the QWERTY keyboard).
20 Getting Started
To enter a space
• In Multipress or T9 mode, press the
key.
To enter a symbol
1. Press and hold the
key.
2. On the menu, click Symbols to display the Symbol page.
3. Select the symbol you want and press ENTER.
To start a new line
In a multi-line text box, such as the notes area of a contact or a calendar appointment, do the following:
• In any input mode, press ENTER.
To enter the plus sign for international calls
• In a numeric entry box, press and hold 0.
Use the QWERTY keyboard
Your phone is equipped with a QWERTY keyboard, which is similar to a standard keyboard on your PC. To
access this keyboard, slide the main screen leftward. This reveals the keyboard.
Note When you slide out the QWERTY keyboard, the display orientation automatically changes to landscape mode.
Closing the keyboard automatically changes the orientation back to portrait mode.
The LED indicators corresponding to the Cap and Fn keys on the keyboard display solid amber color when
the
and
keys are pressed to turn on their functionality. Pressing a desired corresponding key after use
turns them off. You can do the following with the QWERTY keyboard.
•
To type lowercase letters, press the keys using
your thumbs or ﬁngers.
•
To type all uppercase letters, press
first, and
then press
. To turn off this function, press
first, and then press
again.
•
To type a single uppercase letter, press
then press the corresponding key.
•
To enter a number or symbol (labeled in
red color) or to carry out a command like
scrolling a page, press
and then press the
corresponding key.
•
To remain in the scrolling mode or to continue
entering numbers or symbols (labeled in red
color), press
twice and then press the
corresponding keys.
•
Press the left or right SOFT KEY to perform the
command shown in the label above the key.
•
To enter a symbol, press
•
To move or scroll through one page at a time,
press
or
•
To launch Messaging, press
Internet Explorer, press
and
and then press
, while for
LED indicators for
Cap and Fn keys
Getting Started 21
1.8 Battery Information
Battery performance depends on many factors, including your wireless service provider’s network
configuration, signal strength, the temperature of the environment in which you operate your phone, the
features and/or settings you select and use, items attached to your phone’s connecting ports, and your voice,
data, and other program usage patterns.
Battery life estimates (approximations):
• Playing WMV: Up to 8 hours
• Talk time: Up to 5 hours
• Standby time: Up to 200 hours
• Playing WMA: Up to 12 hours
WARNING! To reduce risk of fire or burns:
• Do not attempt to open, disassemble, or service the battery pack.
• Do not crush, puncture, short external contacts, or dispose of in fire or water.
• Do not expose to temperatures above 60˚C (140˚F).
• Replace only with the battery pack designated for this product.
• Recycle or dispose of used battery as stipulated by local regulation.
To check the battery power
• On the Home screen, click Start > Settings > Power Management.
To optimize the power performance
• On the Home screen, click Start > Settings >
Power Management, and adjust the backlight,
display, and light sensor settings.
To manage a low battery
When the low-battery warning appears, do the following:
1. Immediately save your current data.
2. Synchronize with your PC to charge the battery.
3. Turn oﬀ your phone.
Note If you turn off the Phone function when you are out of your network coverage area, the phone automatically goes
to the power-save mode and displays the following message:
Power-Saved Mode
Press any number key to exit
In this mode, your phone conserves the battery power. To quit this mode, press any number key on the keypad.
22 Getting Started
To charge the battery
New batteries are shipped partially charged. Before you start using your phone, it is recommended that you
install and charge the battery. Some batteries perform best after several full charge/discharge cycles.
You can charge the battery in two ways:
•
Connecting your phone directly to an external power source with the AC adapter.
•
Connecting your phone to a PC via the provided USB Sync cable or Splitter cable/adapter.
WARNING!
• Do not remove the battery from the phone while you are charging it using the AC adapter.
• As a safety precaution, the battery stops charging when it overheats.
Chapter 2
Using Phone Features
2.1 Using the Phone
2.2 Making a Voice Call
2.3 Receiving a Voice Call
2.4 In-Call Options
2.5 Additional Dialing Information
24 Using Phone Features
2.1 Using the Phone
You can use your phone to make, receive, and keep track of voice calls, and send text messages (SMS, Short
Message Service) and MMS (Multimedia Messaging Service) messages. You can also dial a phone number
directly from Contacts.
Access the Phone screen
From the Phone screen, you can open, call, or find a contact, and even save a new number in Contacts. To
access the Phone screen, do any of the following:
• Press TALK (
).
• Directly enter the phone number by pressing numeric keys on the phone keypad or the QWERTY
keyboard.
Set ring tones
You can choose how to be notified for incoming calls, reminders, new messages, alarms, and more.
To set a ring tone for incoming calls
1. On the Home screen, click Start > Settings > Sounds.
2. In the Ring tone list, select a ring tone.
3. Click Done.
If you select Vibrate, the sound is muted and the phone will vibrate when you receive a call. The Vibrate icon
( ) appears in the title bar. Selecting None in the Ring tone list mutes the phone. For more information about
sounds, see “Choose how to be notified about events or actions” in Chapter 4.
Note To adjust the earpiece volume during a call, use the volume adjustment slider on the phone's side panel. Adjusting
the volume at any other time can affect the ring, notification and MP3 sound levels.
2.2 Making a Voice Call
With your phone, you can make calls from the Home screen, the Phone screen, from Contacts, Speed Dial, or
Call History.
Make a call from the Home screen
•
•
Enter the phone number by pressing keys on the
phone keypad or the QWERTY keyboard, and press
TALK ( ).
Press the BACK button or Del key if you need to
backspace.
Phone screen
Using Phone Features 25
Tip
You will notice that when you press a key on the phone keypad or the QWERTY keyboard, a list of names and
numbers is displayed as your phone searches Contacts, Call History, and Speed Dial entries to find a matching
name or number. When you see the number or name of the person you want to call, select it, and press TALK (
).
Make a call from Contacts
1. On the Home screen, click Start > Contacts.
2. Select the desired contact, and press TALK (
).
You can also select the desired contact in the contact list, and press the ENTER button twice (once to view the
contact details, and once to dial the associated number).
To specify the number to dial
By default, the mobile telephone number (m) of a contact is dialed when you make a call from Contacts;
however, you can choose to dial a different phone number.
1. On the Home screen, click Start > Contacts.
2. Select the contact.
3. Press NAVIGATION left or right. The letter representing the number changes to m (mobile), w (work), or
h (home).
You can also select a contact in the contact list, and press ENTER to view details and different numbers
associated with the contact. Select a number and press TALK ( ) or press ENTER to dial the number.
• You may also access the contact list by clicking Contacts on the Home Screen.
• To view or edit information associated with the selected contact, click Menu > Edit.
Make a call from Call History
1. On the Home screen, click Start > Call History.
2. Select a name or number, and press TALK (
).
In the Call History screen, press ENTER to view details, such as the dialed, missed, or received call, call duration,
date, and time. Pressing ENTER again dials the associated number.
To customize calls
You can select various options on the Call History screen to customize and filter the calls made, received, or
missed.
• To ﬁnd a name or number in Contacts, click Menu > Find Contact.
• To send a text message, click Menu > Send Text Message.
• To send an e-mail, click Menu > E-mail.
• To ﬁnd the duration of a call, click Menu > View Timers.
• To remove a call or number from Call History, click Menu > Delete.
• To remove the list of calls or numbers from Call History, click Menu > Delete List.
• To save a name or number in Contacts, click Menu > Save to Contacts.
• To categorize the call or number into various call types, click Menu > Filter.
Note You can also save a number in Contacts by clicking Save on the Call History screen.
Make a call from Speed Dial
You can make calls using Speed Dial. To learn how to use Speed Dial, see “Using Speed Dial” in Chapter 8.
26 Using Phone Features
2.3 Receiving a Voice Call
When you receive a phone call, you have the option to answer it or ignore it.
To answer or ignore an incoming call
• To answer the call, click Answer, or press TALK (
• To ignore the call, click Ignore, or press END (
).
).
To end a call
• Press END (
).
2.4 In-Call Options
Your phone provides various options for managing calls. During a call, you can use the loudspeaker mode,
mute or unmute your voice, or access Contacts, Calendar, and Call History for reference.
In-Call options
To turn the speakerphone on and off
The built-in speakerphone allows you to talk hands-free or lets other people listen to the conversation.
• During a call, click Menu > Speakerphone On. The
icon appears at the top of the screen.
• To turn oﬀ the Speakerphone during the call, click Menu > Speakerphone Oﬀ. Alternatively, the
speakerphone can be toggled on and oﬀ by pressing and holding TALK during the call.
WARNING! To avoid damage to your hearing, do not hold your phone against your ear when the Speakerphone is turned
on.
To mute a call
You can turn off the microphone during a call, so that you can hear the caller but the caller cannot hear you.
• During a call, click Menu > Mute.
When the microphone is turned off, the
microphone again.
icon appears on the screen. Click Menu > Unmute to turn on the
Using Phone Features 27
2.5 Additional Dialing Information
Make an emergency call
• Enter the appropriate emergency number for your locale, and press TALK (
).
Make an international call
1. Press and hold
on the phone keypad until the
preﬁx of the country that you are calling.
sign appears. The
replaces the international
2. Enter the full phone number, and press TALK ( ). The full phone number includes country code, area
code (without the leading zero, if any), and phone number.
Insert a pause in a dialing sequence
Some international calls require a pause in the dialing sequence in order for the call to process successfully.
1. On the Home screen, click Start > Contacts.
2. Select the contact entry that contains the phone number in which you want to insert a pause, and
press ENTER to open the contact card.
3. Click Menu > Edit.
4. Position the cursor on the phone number where you want to insert a pause.
5. Click Menu > Insert Pause.
The letter “p” will appear in the number to indicate where the pause will occur in the dialing sequence.
6. Click Done.
Insert a longer pause in a dialing sequence
Some phone numbers may require a longer pause than the default pause in the dialing sequence. In these
cases, you can pause as long as you want, and manually continue the dialing sequence.
1. On the Home screen, click Start > Contacts.
2. Select the contact entry that contains the phone number in which you want to insert a longer pause,
and press ENTER to open the contact card.
3. Click Menu > Edit.
4. Position the cursor on the phone number where you want to insert a longer pause.
5. Click Menu > Insert Wait.
The letter “w” will appear in the number to indicate where the longer pause (wait) will occur in the
dialing sequence.
6. Click Done.
Note When you call a number that contains a longer pause, you must press TALK (
) again to continue dialing.
28 Using Phone Features
Chapter 3
Synchronizing Information
and Setting Up E-mail
Security
3.1 About ActiveSync
3.2 Setting Up ActiveSync
3.3 Synchronizing Information
3.4 Synchronizing via Bluetooth
3.5 Synchronizing Music, Video, and Pictures
3.6 Setting Up E-mail Security
30 Synchronizing Information and Setting Up E-mail Security
3.1 About ActiveSync
ActiveSync synchronizes information on your phone with information on your PC such as Outlook content.
ActiveSync can also synchronize over a wireless or cellular network with Exchange Server if your company or
service provider is running Exchange Server with Exchange ActiveSync.
Specifically, you can use ActiveSync to:
• Synchronize information, such as Outlook e-mail, contacts, calendar, or tasks information on your
phone with your PC, as well as pictures, video, and music.
• Synchronize Outlook e-mail, contacts, calendar appointments, and tasks on your phone directly with
Exchange Server so that you can stay up to date even when your PC is turned oﬀ.
• Copy ﬁles between your phone and your PC.
• Select which types of information are synchronized and specify how much information is synchronized.
For example, you can choose how many weeks of past calendar appointments to synchronize.
• Add and remove programs on your phone. For details, see Chapter 4, “Adding and Removing Programs.”
3.2 Setting Up ActiveSync
To install and set up ActiveSync on the computer
1. Install ActiveSync on your PC, as described on the Windows Mobile® Getting Started Disc.
2. After Setup completes, the Synchronization Setup Wizard automatically starts when you connect your
phone to the PC. The wizard will guide you to create a synchronization relationship between your
phone and computer. Click Next.
3. Do not select the Synchronize directly with a server running Microsoft Exchange Server check box
if you will synchronize your phone with a computer. Just click Next, then skip to step 8.
4. If you will synchronize your phone with Exchange Server, select the Synchronize directly with a
server running Microsoft Exchange Server check box, then click Next.
5. On the Exchange server credentials screen, enter the Exchange server address, your user name and
password, and the domain name.
If you do not know what the Exchange server address and domain name are, you can check with your
network administrator, or you can check them in your computer by doing the following:
Synchronizing Information and Setting Up E-mail Security 31
a. In Outlook, click Tools > E-mail Accounts.
b. Select View or change existing e-mail accounts.
c. Double-click Microsoft Exchange Server.
d. On the Exchange Server Settings screen, you will see the Exchange Server name.
e. To check the domain name, click Start > Settings > Control Panel, then double-click System.
f. In the System Properties dialog box, click the Computer Name tab. You will then see the domain
name.
6. On your phone, you also need to enter the Exchange server settings. For information about this, see
“Synchronizing directly with Exchange Server.”
7. On the Synchronization Setup Wizard, click Next.
8. Select the information types to synchronize between your phone and computer.
If you will synchronize your phone with both your computer and Exchange Server, do the following:
• For the Contacts, Calendar, E-mail, and Tasks items, choose whether to synchronize them with the
computer or with the Exchange Server. These items cannot be synchronized to both.
• Select the check boxes of the other information types if you want to synchronize them with your
computer.
32 Synchronizing Information and Setting Up E-mail Security
Information types on the PC and Exchange Server
9. Click Next.
10. Click Finish.
When you finish the wizard, ActiveSync synchronizes your phone automatically. Once synchronization
completes, you can disconnect your phone from your PC.
3.3 Synchronizing Information
When you connect your phone to the PC, ActiveSync will immediately synchronize. While the phone is
connected, ActiveSync synchronizes every time you make a change on either the PC or the phone.
To manually start and stop synchronization
1. Connect your phone.
• To synchronize local information on the PC, such as Outlook information or media files, connect your
phone to the PC using Bluetooth or a cable.
• If you are synchronizing directly with Exchange Server, you can use the connection to the PC to
access the network, or you can synchronize over a cellular or wireless network without connecting
to the PC.
2. In ActiveSync, click Sync. To end synchronization before it completes, click Stop.
Note ActiveSync 4.x utilizes a network type of connection with Windows Mobile powered devices, since this allows
faster data transfer than a serial USB connection. When the PC is connected to the Internet or a local network, in
some cases, the PC may disconnect the ActiveSync connection with your device in favor of the Internet or network
connection. If this happens, click Start > Settings > Connections > USB to PC, then clear the Enable advanced
network functionality check box. This makes ActiveSync utilize a serial USB connection with your device.
Synchronize Outlook information with the computer
If you have set up a synchronization relationship between your phone and the PC, synchronization keeps
Outlook information up-to-date on both of them.
You can also set up your phone to synchronize with more than one PC, or with a combination of one or
more PCs and Exchange Server. When synchronizing with multiple computers, the items you synchronize
will appear on all of the computers with which they are synchronized. For example, if you have set up
Synchronizing Information and Setting Up E-mail Security 33
synchronization with two PCs (PC1 and PC2), which have different items, and you synchronize Contacts and
Calendar on the phone with both computers, the result is as follows:
Location
PC1
PC2
Phone
New state
All Outlook contacts and calendar appointments that were on PC2 are now also on PC1.
All Outlook contacts and calendar appointments that were on PC1 are now also on PC2.
All Outlook contacts and calendar appointments from both PC1 and PC2 are on the phone.
Note Outlook e-mail can be synchronized with only one computer.
To change which information is synchronized
ActiveSync synchronizes a limited amount of information by default to save storage space on your phone. You
can change the amount of information that is synchronized by performing the following steps.
Note Before changing synchronization settings on the phone, disconnect it from your PC.
1. On the Home screen, click Start > ActiveSync.
2. In ActiveSync, click Menu > Options.
3. Do one or more of the following:
• Select the check box for the items you want to synchronize.
If you cannot select a check box, you might have to clear the
check box for the same information type elsewhere in the list.
• Clear the check box for any items you want to exclude.
• To customize synchronization of a computer, select the
computer name then click Menu > Settings.
• To customize synchronization of a particular information, select
the information type then click Settings.
• To stop synchronizing with one computer completely, select
the computer name and click Menu > Delete.
Sync options
Note Outlook e-mail can be synchronized with only one computer.
Synchronize Outlook information with Exchange Server
You can set up synchronization with Exchange Server on your phone, if it is available to you through your
company or wireless service provider. However, you should first ask your administrator or check your
computer for the following information and then carry on with the steps: Exchange Server name, domain
name, your user name, and password. (For information about how to check the Exchange server name and
domain on your PC, see “To install and set up ActiveSync on the computer.”)
Note Before changing synchronization settings on the phone, disconnect it from your PC.
To synchronize directly with Exchange Server
1. Do one of the following:
• Click Start > Messaging > New Account. On the E-mail Setup screen, select Outlook E-mail in the
Your e-mail provider list, then click Next.
• In ActiveSync on your phone, click Menu > Configure Server. If you have not yet set up
synchronization with Exchange Server, this appears as Add Server Source.
2. On the Edit Server Settings screen, enter the name of the server running Exchange Server in the Server
address box, and click Next.
3. On the User Information screen, enter your user name, password, and domain name.
4. If you want the phone to save your password so that you need not to enter it again when connecting,
select the Save password check box. Then, click Next.
34 Synchronizing Information and Setting Up E-mail Security
5. On the Options screen, select the check boxes of the types of information that you want to synchronize
with the Exchange Server.
6. To customize synchronization of a particular information, select the type of information then click
Menu > Settings.
Note Settings is not available for Contacts and Tasks.
7. To change the rules for resolving synchronization conﬂicts, click Menu > Advanced on the Options
screen.
8. Click Finish.
Note You can also use the Sync Setup Wizard to set up the phone to synchronize remotely with the Exchange Server.
This wizard is started when you connect your phone to your PC after installing ActiveSync on the PC.
Schedule synchronization with Exchange Server
You can schedule information to be synchronized automatically between your phone and the Exchange
Server, or schedule synchronization at regular time intervals. Choose between these two methods, depending
on your e-mail volume and which method you think is more cost-effective.
To receive e-mails and synchronize other information instantly
The Direct Push technology (Push E-Mail feature) enables you to receive new e-mails on your phone as
soon as they arrive in your Inbox on the Exchange Server. With this feature, items, such as contacts, calendar
and tasks are also immediately updated onto your phone when these items have been changed or new
entries have been added on the Exchange Server. To make Direct Push work, your phone is set up with a high
performance over-the-air network connection, such as 1xRTT or EVDO. For more information about these
connections, contact your network service provider.
The Direct Push feature works for your phone if your private network such as your corporate network is
using Microsoft Exchange Server Service Pack 2 (SP2) with Exchange ActiveSync, and after your first full
synchronization with the Exchange Server.
Using Comm Manager
1. Click Start > Comm Manager.
2. In the Comm Manager screen, click the Microsoft Direct Push button. The button
this indicates that you will receive e-mails as they arrive.
When the button is in the
state, you need to manually retrieve your e-mails.
Using ActiveSync
1. In ActiveSync on your phone, click Menu > Schedule.
2. Select As items arrive in the Peak times and Oﬀ-peak times boxes.
will turn to
Synchronizing Information and Setting Up E-mail Security 35
To schedule synchronization at regular time intervals
You can set how often to synchronize during Peak times (which usually refer to your working hours) when
e-mail volume is high, as well as Off-peak times when e-mail volume is low.
1. In ActiveSync on your phone, click Menu > Schedule.
2. On the Schedule screen, select a shorter time interval in the Peak times box for you to be able to
receive e-mails more frequently.
3. Select a longer interval in the Oﬀ-peak times box.
Tip
To set the days and hours that make up your peak and off-peak times, click Menu > Peak Times on the Schedule
screen.
3.4 Synchronizing via Bluetooth
You can connect your phone to the PC to synchronize using the local wireless technology, Bluetooth.
To synchronize with a PC via Bluetooth
1. Follow the instructions in ActiveSync Help on the PC for conﬁguring Bluetooth on your PC to support
ActiveSync.
2. On the Home screen, click Start > ActiveSync.
3. Click Menu > Connect via Bluetooth. Ensure that the phone and the PC are within close range.
4. If this is the ﬁrst time you have connected to this PC via Bluetooth, you must complete the Bluetooth
wizard on the phone and set up a Bluetooth partnership with the PC before synchronizing.
5. Click Sync.
6. When ﬁnished, click Menu > Disconnect Bluetooth.
Notes
• To preserve battery power, turn off Bluetooth when not in use.
• To connect and synchronize your phone with a computer via Bluetooth, your computer must have a Bluetooth
adapter or dongle.
3.5 Synchronizing Music, Video, and Pictures
If you want to take your music or other digital media with you, ActiveSync works with Windows Media Player
to synchronize music, video, and pictures with your phone.
Other than selecting the media information type in ActiveSync to be synchronized, all media synchronization
settings must be set in Windows Media Player. Before media can be synchronized, you must do the following:
• Install Windows Media Player Version 10 or later on the PC.
• Connect your phone to the PC with a USB cable. If the phone is currently connected using Bluetooth,
you must end that connection before media can be synchronized.
• Insert a 32MB or larger storage card into your phone.
• Set up a sync partnership between the storage card and Windows Media Player.
Change Media synchronization settings
Once you select the Media information type in ActiveSync to be synchronized, any of your favorite music,
video, and picture files in Windows Media Player playlists can be synchronized by ActiveSync. All you have to
do is set up synchronization in Windows Media Player for those media files.
36 Synchronizing Information and Setting Up E-mail Security
To set up a sync relationship with a storage card
1. On the PC, open Windows Media Player.
2. Click the Sync tab.
3. Select the storage card.
4. Click Set up Sync.
5. Choose whether to synchronize automatically or
manually.
For information about using Windows Media Player on the phone, see “Using Windows Media Player” in
Chapter 7.
3.6 Setting Up E-mail Security
Windows Mobile on your phone protects your Outlook e-mails through Secure/Multipurpose Internet Mail
Extension (S/MIME), which allows you to digitally sign your messages as well as encrypt them.
Using authorization keys and certificates, S/MIME allows you to digitally sign your e-mail messages to prove
your identity to the recipients. Authorization keys are also used when encrypting messages to improve
privacy and prevent undue tampering or hacking of your messages. You can encrypt a message with or
without a certificate. However, to read an encrypted message, you need a valid certificate for decrypting email messages.
Note S/MIME encryption and digital signatures for Windows Mobile-based devices are available only with Exchange Server
2003 Service Pack 2 or a later version that supports S/MIME. If you are not using one of these products, or have not yet
synchronized, these options are unavailable.
Digitally sign and encrypt all messages
ActiveSync allows you to set up S/MIME e-mail encryption and signing. You will have to obtain a valid
certificate for signing or encrypting e-mail before you will be able to sign or encrypt mail successfully.
1. On the Home screen, click Start > ActiveSync.
2. Click Menu > Options.
3. Select the E-mail information type, and click Settings. On the E-mail Sync screen, click Menu >
Advanced.
Synchronizing Information and Setting Up E-mail Security 37
4. Do one or both of the following:
• To sign all your outgoing e-mail messages so that recipients can be certain that the messages were
sent by you and have not been altered in any way, select Sign messages.
• To encrypt all your outgoing e-mail messages so that the contents of your messages are protected
from being viewed by anyone other then the intended recipients, select Encrypt messages.
5. Click Menu > Choose Certiﬁcate to select a certiﬁcate for signing or encrypting outgoing e-mail
messages.
You can select certiﬁcates to sign or encrypt e-mail messages individually if you do not choose to sign
or encrypt all outgoing e-mails. For information about signing and encrypting individual messages, see
“Individually sign and encrypt a message” in Chapter 6.
38 Synchronizing Information and Setting Up E-mail Security
Chapter 4
Managing your Phone
4.1 Personalizing your Phone
4.2 Adding and Removing Programs
4.3 Using Task Manager and Managing Memory
4.4 Managing and Backing Up Files
4.5 Protecting your Phone
4.6 Restarting your Phone
4.7 Resetting your Phone
40 Managing your Phone
4.1 Personalizing your Phone
Set up the Home screen
The Home screen is your starting place for most tasks. You can gain access to all features and programs from
the Home screen.
The top of the Home screen displays icons for the programs that you have most recently used. The center of
the Home screen can display your next appointment, the number of new messages (voice mail, text, e-mail, or
MMS) that you have received, and other important information. When you click an icon or item on the Home
Screen, the associated program opens.
To customize the Home screen
1. On the Home screen, click Start > Settings > Home Screen.
2. In Home screen layout, Color scheme, Background image, and Time out, select the options you
want, and click Done.
To set a picture as the background
1. On the Home screen, click Start > Pictures & Videos.
2. Select the picture you want to set as the background. Click View or press ENTER for a larger view of the
image.
3. Click Menu > Use as Home Screen.
4. Use NAVIGATION to select the portion of the picture you want to use, and click Next. If the picture ﬁts
the screen, this step is skipped.
5. In Adjust the transparency, select a higher percentage for a more transparent picture or a lower
percentage for a more opaque picture.
6. Click Finish.
Set date, time, language, and other regional options
Your phone should already be set up with the regional settings that are appropriate for your locale.
To change regional settings
You can specify the language, locale, date and time style, as well as number and currency formatting options.
1. On the Home screen, click Start > Settings > Regional Settings.
2. In Language, select your preferred language.
3. In Locale, select the locale for the language you selected. The Locale option automatically changes the
format of the remaining options (such as date, time, and currency) according to the locale you specify.
4. Click Done.
Note You must turn your phone off and on again for the changes to take effect.
To set the date and time
1. On the Home screen, click Start > Settings > Clock & Alarm > Date and Time.
2. In Time zone, select your time zone.
3. In Date, edit the month, day, or year.
4. In Time, edit the hour, minute, and second.
5. Click Done.
Managing your Phone 41
Choose how to be notified about events or actions
A profile is a group of settings that determine how your phone will alert you to incoming calls and events,
such as e-mail receipt notifications, alarms, or system events. A number of different preset combinations of
these settings are included with your phone. Each profile appears with a descriptive name.
To change the current profile
1. On the Home screen, click Proﬁle: [Type]. For example, Proﬁle: Normal.
2. Choose a new proﬁle, and click Done.
Tip
To quickly change the profile, press and hold POWER to display the Quick List, and choose a profile. You can also
change the profile by clicking Settings > Profiles from the Comm Manager screen.
To edit a profile
1. On the Home screen, click Proﬁle: [Type]. For example, Proﬁle: Normal.
2. Select the proﬁle to edit.
3. Click Menu > Edit.
4. Do one of the following:
• Modify the settings, and click Done.
• To cancel without saving changes, click Cancel.
Tip
To revert to the default profile settings, click Menu > Reset to default.
To specify the sound for an event
1. On the Home screen, click Start > Settings > Sounds.
2. For the desired event, select a sound. Select None if you do not want to hear a sound.
3. Click Done.
Note For ring tones, you can use sounds in either .wav, .mid, .wma, or .mp3 file format. For notifications or reminders,
you can use .wav or .mid files.
Tip
When you select a sound, the sound plays. To hear it again, select Menu > Play.
To set sound for the keyboard
1. On the Home screen, click Start > Settings > Sounds.
2. In Keypad control, select a sound. Select None if you do not want to hear any sound while pressing a
key.
3. Click Done.
To display digital clock on Unlock message screen
You have the option to choose whether you want to view the current date and time while you unlock the
phone.
1. On the Home screen, click Start > Settings > Unlock Screen Clock.
2. Select the desired option for date and time, and click Done.
To copy a sound to your phone
After a sound file is located on your phone, you can use it for a ring tone, notification, or reminder. Sound files
in either .wav, .mid, .wma, or .MP3 formats can be used.
1. Connect the phone to your PC using a USB connection.
2. On your PC, copy the sound ﬁle you want.
42 Managing your Phone
3. In ActiveSync on your PC, click Explore and double-click My Windows Mobile-Based Device.
4. Do one of the following:
• To save the sound file on your phone, double-click Application Data, double-click Sounds, and
paste the file into that folder.
• To save the sound file on your storage card, double-click Storage Card, and paste the file into the
folder you want.
To set an alarm
1. On the Home screen, click Start > Settings > Clock & Alarm > Alarm.
2. In Alarm, choose one of the following:
• Off to turn the alarm off.
• On to turn the alarm on.
3. In Alarm time, enter the time for the alarm to go oﬀ.
4. Click Done.
Set personal information
Entering and displaying owner information are best practices; they allow someone to return the phone to you
in case it is lost.
To enter owner information
1. On the Home screen, click Start > Settings > Owner Information.
2. Complete the following:
• In Name, enter your name.
• In Telephone number, enter a number where you can be reached.
• In E-mail address, enter your e-mail address.
• In Notes, enter any other information you want to include.
3. Click Done.
Set performance and maintenance options
To change accessibility settings
1. On the Home screen, click Start > Settings > Accessibility.
2. Select your preference for the following:
• In System font size, set the size of the font that is displayed on the screen.
• In Multipress time out, set the length of time between keypresses when entering text in Multipress
mode.
• In Confirmation time out, set the delay before an unconfirmed action times out.
• In In-call alert volume, set the volume for incoming call or receiving new message alerts while you
are in a call.
3. Click Done.
Managing your Phone 43
To change power management settings
You can use Power Management to check the battery, and configure settings that prolong battery life.
1. On the Home screen, click Start > Settings > Power Management.
2. Adjust the following:
• In Backlight time out on battery, select the amount of time for the phone to be idle before the
backlight turns off.
• In Backlight time out on AC, select the amount of time for the phone to be idle before the
backlight turns off when using AC power.
• In Display time out, select the time limit for the phone to be idle before the screen turns off.
3. Click Done.
Tip
Main battery indicates the amount of battery life remaining.
To find the operating system version number
• On the Home screen, click Start > Settings > About.
The operating system version number installed on your phone along with the manufacturer copyright
information will be listed on the screen.
To find the phone specification
• On the Home screen, click Start > Settings > System Information.
The System Information screen displays the details about the phone speciﬁcation, such as processor,
speed, memory, display, model name, and so on.
To turn on and off error reporting
1. On the Home screen, click Start > Settings > Error Reporting.
2. Do one of the following:
• Select Enable to turn on error reporting.
• Select Disable to turn off error reporting.
3. Click Done.
Use phone settings and services
You can customize and set various options for an incoming or outgoing call on your phone, such as voice
privacy, location, and more. You can also choose to activate and use optional phone services on your phone.
Contact your wireless service provider first to ask about the availability of these services before you use them.
The following are some of the optional phone services that can be used on your phone:
Phone Settings and
Services
Use
Call Options
Provide options for setting any key answer to incoming calls, notifying when voice privacy is
unavailable, and setting your phone number, voice mail number, country code, and area code.
Location Setting
Allow the mobile phone network to detect your current location via your device’s built-in GPS
chip. This is especially useful in times of emergency.
At the top right of the Phone screen and Home screen, one of these icons appears:
- when the LOCATION ON option is selected
- when the 911 ONLY option is selected
Mode Preference
Provide options to select a connection mode for your phone. While there are options to
choose between 1x-Only and EVDO-Only, it is recommended that you select Automatic to
let your phone choose the connection mode on its own.
44 Managing your Phone
Phone Settings and
Services
Use
NAM Select
Number Assignment Module (NAM) is a memory location on your device where programmed
phone numbers are stored. Your service provider may store up to two numbers on your
device: NAM 1 which stores your phone number, and NAM 2 which stores a different phone
number for roaming. You can manually select one of these numbers, or you can select the
Auto-NAM option to make your device automatically switch to one of the programmed
numbers when it detects the appropriate network signal.
Network Service
Choose to accept roaming (by selecting one of these options: Automatic-A or Automatic-B.
Otherwise restrict your device to phone calls from your home network only (by selecting the
Home only option).
TTY Mode
Allow the use of a TTY (teletypewriter) device with the phone for users who are visually or
hearing impaired.
Voice Privacy
Protect conversations from possible eavesdropping, especially when you are roaming. This
prevents devices such as scanners to pick up your frequency.
To enable optional phone services
1. Click Start > Settings > Phone.
2. Select the service you want to use and press ENTER.
3. Select desired options for the service and click Done.
Note You can also access the Phone settings by clicking Settings > Phone on the Comm Manager screen.
To turn voice privacy on or off
1. Click Start > Settings > Phone > Voice Privacy.
2. Press ENTER to select the desired option, and click Done.
Either
or appears on the upper right area of the Phone screen during a call based on whether voice
privacy has been enabled or disabled.
4.2 Adding and Removing Programs
Before you purchase additional programs for your phone, you should note the name of your phone, the
version of Windows Mobile software running on it, and the type of processor. This information will help you
select a program that is compatible with your phone. For more information, see “To find the operating system
version number” in this chapter.
Programs available for purchase usually include a Setup program (commonly named “setup.exe”) that you
must first install on your PC. You can then use ActiveSync to add programs to your phone or add a program
directly from the Internet.
To add programs
1. Download the program to your PC (or insert the disc that contains the program into the CD drive of your
PC). You may see a single *.exe ﬁle, a *.zip ﬁle, a Setup.exe ﬁle, or several versions of ﬁles for diﬀerent
device types and processors. Be sure to select a program designed for your phone and processor type.
2. Read any installation instructions or documentation that comes with the program. Many programs
provide special installation instructions.
3. Connect your phone and PC.
4. Double-click the *.exe ﬁle.
• If the executable file is an installation wizard, follow the instructions on the screen. Once the program
has been installed on your PC, the wizard will automatically transfer the program to your phone.
Managing your Phone 45
• If an installation wizard does not start, you will see an error message stating that the program is valid
but that it is designed for a different type of computer. You will need to copy this program to your
phone. If you cannot find any installation instructions for the program, use ActiveSync to copy the
program file to the Program Files folder on your phone.
To remove a program
Programs that come with the phone cannot be removed.
1. On the Home screen, click Start > Settings > Remove Programs.
2. Scroll to the program to remove.
3. Click Menu > Remove.
4.3 Using Task Manager and Managing Memory
To see how much memory is available
1. On the Home screen, click Start > Settings > About.
2. Scroll down to Available Memory.
Use Task Manager
Task Manager allows you to view all the programs currently running on your phone in the form of a list. From
Task Manager, you can switch to, activate, or terminate any currently running program. It also allows you to
view the phone’s memory status.
To start Task Manager
• Click Start > Task Manager.
Task Manager
The Task Manager Menu contains the following options.
Option
Allows you to
Go To
Switch to the selected program.
Refresh
Refresh the Task Manager screen to reflect a list of currently running programs.
Stop
Stop the selected program. You can view the free memory status at the bottom of the screen.
Stop All
Stop all listed programs. Click OK to confirm that you want to end all currently running programs. You can
view the free memory status at the bottom of the screen.
Stop All But
Selected
Stop all running programs in the list except the one you selected.
System Info
View information about power status, memory usage, flash, and phone information.
About
View program name, version, and copyright information.
46 Managing your Phone
4.4 Managing and Backing Up Files
You can back up files to your PC using ActiveSync or copy files to a storage card that is installed by you on
your phone. You can also efficiently manage your files and folders using File Explorer installed on your phone.
Using Microsoft ActiveSync, you can copy or move information from the PC to the phone and vice versa.
Changes you make to the information on one computer will not affect the information on the other computer.
If you want to automatically update information on both your phone and PC, synchronize the information
instead. For more information about copying and synchronizing files, see ActiveSync Help on your PC.
To copy a file using ActiveSync
Copying a file results in separate versions of a file on your phone and PC. Because the files are not
synchronized, changes made to one file will not affect the other.
1. Connect your phone to your PC.
2. In ActiveSync, click Explore, which opens the Mobile Device folder for your phone.
3. In the Mobile Device folder, go to the ﬁle that you want to copy on your phone or PC.
4. Do one of the following:
• To copy the file to your phone, right-click the file, and click Copy. Right-click the desired folder on
your phone, and click Paste.
• To copy the file to your PC, right-click the file and click Copy. Right-click the desired folder on your
PC, and click Paste.
Use File Explorer
File Explorer provides many easy-to-use features for file and folder management.
To start File Explorer
• On the Home screen, click Start > File Explorer.
File Explorer operates in the following two views:
• List View
• Icons View
File Explorer displays the entire file structure in your phone’s memory. The functions focus primarily on folder
management. When initially started, File Explorer is in List View by default. To switch between views, click
Menu > View > Icons or List.
The File Explorer menu contains the following options:
Option
Allows you to
Send
Lets you send the selected file through one of the
messaging features.
Beam
Lets you send the selected file through Bluetooth .
Edit
Opens a menu where you can choose to cut, copy, paste,
delete or rename a file. You can also create a new folder.
Properties
View information about the selected folder or file.
View
Opens a menu where you can switch between the Icons
or List view.
Sort By
Opens a menu where you can choose to sort the files or
folders by Name, Date, Size or Type.
My Device
Displays the folders and files in the root folder of the
phone.
My Documents Displays the folders and files in the My Documents folder.
File Explorer - List View
Managing your Phone 47
To send a ﬁle as an e-mail attachment
1. In File Explorer, select a ﬁle.
2. Click Menu > Send.
3. On the Messaging screen, select Outlook E-mail or a custom e-mail account.
4. The ﬁle will automatically be attached to the new message.
Specify the recipient and subject, and type your message.
5. Click Send.
4.5 Protecting your Phone
You can protect your phone from unauthorized use by requiring a type of password called a simple PIN
(personal identification number) or a strong alphanumeric password.
To lock the keypad
Locking the keypad turns off keypad functionality. This is a helpful feature if, for example, the phone is turned
on and in your pocket, and you want to prevent accidental keypresses. Locking keypad also locks the QWERTY
keyboard.
• On the Home screen, press and hold HOME.
Once the keypad is locked, the left soft key label changes to Unlock.
Tip
To quickly lock the keypad, select Key lock from the Quick List.
Note You can still receive calls and make emergency calls when the keypad is locked.
To unlock the keypad
• On the Home screen, click Unlock and press the * key.
To enable the phone lock
1. On the Home screen, click Start > Settings > Security > Device lock.
2. Select Prompt if device unused for then select the amount of time for the phone to be inactive before
automatically locking.
3. Select the Password type then enter and conﬁrm your password.
4. Click Done.
Notes
• Alternatively, select Device lock from the Quick List to configure the phone lock settings.
• Once you configure the phone lock settings, you can enable the phone lock from the Quick List directly without
configuring the settings again.
To disable the phone lock
• Click Unlock then enter the password you have set to unlock your phone.
48 Managing your Phone
4.6 Restarting your Phone
Occasionally, you may want to restart your phone, for example, when a program is not performing properly or
the phone is not responding to any keypresses.
To restart the phone
1. Remove the battery.
2. Reinsert the battery and turn on your phone.
WARNING! If the phone is restarted while a program is running, any unsaved work will be lost.
4.7 Resetting your Phone
Resetting your phone will remove all the data from its memory which include contacts, tasks, calendar
appointments, and more, and restore the phone back to the factory default settings.
WARNING! All your data will be deleted, it is recommended that you back up your data first before resetting your phone.
To reset your phone
1. Click Start > Accessories > Clear Storage.
2. Follow the on-screen instructions to reset the phone.
The phone will restart after it has been reset.
Chapter 5
Getting Connected
5.1 Connecting to the Internet
5.2 Using Internet Explorer Mobile
5.3 Using Internet Sharing
5.4 Using Comm Manager
5.5 Using Bluetooth
50 Getting Connected
5.1 Connecting to the Internet
Your phone’s powerful networking capabilities allow you to access the Internet or your corporate network at
work through wireless and conventional connections. Specifically, you can configure your phone to establish
a connection via Dial-up, Bluetooth, Virtual Private Network (VPN), or Proxy.
With an active connection on your phone, you can browse the Web, download e-mails, or chat using Pocket
MSN. Check with your service provider to see if a connection has already been set up for you, and if over-theair configuration is supported.
If you need to manually set up a connection, it is important that you obtain the following information from
your Internet Service Provider (ISP) or the company whose intranet you are trying to access:
• ISP server phone number
• User name
• Password
• Domain name (required for accessing a corporate network or an intranet)
Set up a Dial-up connection
When you use your phone to dial up to your ISP and connect to the Internet or to your corporate network, you
will be billed by the number of minutes that you use.
However, there are some high speed and high performance data connection services (such as 1xRTT and
1xEVDO) available on your phone. While 1xRTT (1 times Radio Transmission Technology) is a third-generation
data service (equivalent to GPRS), 1xEVDO (1 times Evolution Data Optimized) is another high speed wireless
broadband service (equivalent to UMTS) available on your phone for quick Internet access and Direct Push to
work. For more information on how to avail these services, contact your network service provider.
To establish a dial-up connection on your phone, you need the same settings that you normally use when you
dial up from your computer. This includes the ISP server phone number, your user name, and password.
To set up a dial-up connection for browsing the Internet
1. On the Home screen, click Start > Settings > Connections > Dial-up.
2. Click Menu > Add.
3. In Description, enter a name for the connection.
4. In Connects to, select The Internet.
5. Enter the appropriate information in the remaining ﬁelds.
6. Click Done. To start browsing the Internet, click Start > Internet Explorer.
Getting Connected 51
To set up a dial-up connection to your corporate network
1. On the Home screen, click Start > Settings > Connections > Dial-up.
2. Click Menu > Add.
3. In Description, enter a name for the connection.
4. In Connects to, select Work.
5. Enter the appropriate information in the remaining ﬁelds.
6. Click Done.
Note You can also add and set up the following connections:
• VPN: A VPN connection is used to access your corporate network by using an existing Internet connection.
• Proxy: A Proxy connection is used to access the Internet using an existing connection to your corporate or WAP
network.
Advanced options
From the Connections screen, you can access advanced options to specify the service provider, the number of
redial attempts, the amount of idle time to wait before disconnecting, and so on.
1. On the Home screen, click Start > Settings > Connections.
2. Click Menu > Advanced.
3. Select a network service provider for each connection type. You can choose Automatic to allow the
phone to set a service provider for each connection by default.
4. Click Menu > Options.
5. Choose the appropriate information in the remaining ﬁelds.
6. Click Done.
Add a URL exception
Some URLs for Web pages on your company intranet may use periods, for example: intranet.companyname.
com. To view these pages in Internet Explorer Mobile, you must create a URL exception.
1. On the Home screen, click Start > Settings > Connections.
2. Click Menu > Advanced.
3. Click Menu > Work URL Exceptions.
4. Click Menu > Add.
5. In URL Pattern, enter the URL name.
To add multiple URLs, use a semicolon (;).
6. Click Done.
Note You do not need to create URL exceptions for Internet URLs.
5.2 Using Internet Explorer Mobile
Internet Explorer Mobile is a full-featured Internet browser, optimized for use on your phone.
To open Internet Explorer
• On the Home screen, click Start > Internet Explorer.
Note You can also open Internet Explorer by pressing
and then
from the QWERTY keyboard.
52 Getting Connected
To go to a link
1. While on a Web page, scroll vertically or horizontally to see all available links.
2. Click the link.
To go to a Web page
1. In Internet Explorer, click Menu > Address Bar.
2. Enter the address, and click Go.
To change Web page display options
1. While on a Web page, click Menu > View.
2. Select one of the following:
• One Column. Arranges the content into one column that is as wide as the screen. This means that
you will rarely have to scroll horizontally.
• Default. Maintains a layout similar to what you see on a desktop computer, but makes items smaller
and arranges the content so that you can see most of it without having to scroll horizontally.
• Desktop. Keeps the same layout and size as on a desktop computer, which will require both
horizontal and vertical scrolling.
To change the size of text on Web pages
•
While on a Web page, click Menu > Zoom and select the size you want.
To show or hide pictures on Web pages
•
While on a Web page, click Menu > View > Show Pictures.
A check mark next to Show Pictures indicates that pictures will be displayed on Web pages.
To view a page in full-screen mode
•
Tip
While on a Web page, click Menu > View > Full Screen.
To exit full-screen mode, press any of the SOFT KEYs, and then click Menu > View > Full Screen to cancel the selection.
To add a Web page to the Favorites list
1. To go to the page you want to add, click Menu > Address Bar, enter the address, and click Go.
2. Click Menu > Add to Favorites.
3. Conﬁrm or change the name and Web page address.
4. In Folder, select a folder for the favorite.
5. Click Add.
Tip
A quick way to add favorites to your phone is to synchronize with your PC using ActiveSync. For more information,
see ActiveSync Help on your PC.
To view a favorite
1. While on a Web page, click Favorites.
2. Select a favorite, and click Go.
To move a favorite to a folder
1. Click Favorites.
2. Select the favorite to move.
Getting Connected 53
3. Click Menu > Edit.
4. Under Folder, scroll to the folder to which you want to move the favorite.
5. Click Done.
To clear history, cookies, or temporary files
1. While on a Web page, click Menu > Tools > Options.
2. Click Memory.
3. Select the type of memory to clear.
4. Click Clear, click Yes, and then click Done.
To send a link via e-mail
1. Go to the desired Web page.
2. Click Menu > Tools > Send Link via E-mail.
3. Select Text Messages or Outlook E-mail.
4. A new message is created with the page address inserted in the message body.
5.3 Using Internet Sharing
With Internet Sharing, you can use your phone as an external modem for another device, such as a PDA or
notebook computer.
Notes • Make sure you have set up a phone dial-up modem connection on your phone. If your phone has not been set up
with a data connection yet, click Menu > Connection Settings on the Internet Sharing screen. For more information
about setting up a phone dial-up connection, see "Set up a dial-up connection".
• If you want to use a USB cable connection, you must first install Microsoft ActiveSync version 4.2 or later on the
computer.
• Before using Internet Sharing, disable ActiveSync on your computer. To disable ActiveSync, open ActiveSync on your
computer, then click File > Connection Settings and clear Allow USB Connections.
Set up the phone as a modem
To set up the phone as a USB modem
1. On your phone, click Start > Internet Sharing.
2. In the PC Connection list, select USB.
3. In the Network Connection list, select the name of connection that your phone uses to connect to the
Internet.
4. Plug in the USB cable between your phone and the computer.
5. Click Connect.
To end the Internet connection
•
On the Internet Sharing screen, click Disconnect.
To set up the phone as a Bluetooth modem
You can connect your phone to a computer through Bluetooth and use the phone as a modem for the computer.
To learn how to set up the phone as a Bluetooth modem, see “Use the phone as a Bluetooth modem” in this
chapter.
54 Getting Connected
5.4 Using Comm Manager
Comm Manager acts like a central switcher that lets you enable or disable phone features as well as manage
your data connections easily.
To open Comm Manager:
• Click Start > Comm Manager.
Simply click the corresponding button to enable or disable a feature.
1.
Click to toggle between enabling or disabling the phone. Click Settings >
Phone to manage Phone settings.
2.
Click to toggle between turning on or off Bluetooth. See “Using
Bluetooth” for details. Click Settings > Bluetooth Settings to configure
Bluetooth on your phone.
3.
Click to toggle between automatically receiving (as items arrive) or
manually retrieving Outlook e-mails. For more information, see “To
receive e-mails and synchronize other information instantly” in Chapter
3.
4.
Click to stop active data services (e.g. ISP dial-up, 1xRTT, or 1xEVDO).
You cannot reconnect data services in Comm Manager.
5.
Click to toggle between turning on the phone's ringer or setting it
to vibration/mute mode. Click Settings > Profiles to edit a profile or
customize notification settings.
6.
Click to open ActiveSync so you can synchronize the phone and
computer. For more information about the configuration settings for
ActiveSync, see Chapter 3.
Comm Manager screen
Note You can also change the Phone settings and Profiles from the Comm Manager screen by clicking Settings.
5.5 Using Bluetooth
Bluetooth is a short-range wireless communications technology. Phones with Bluetooth capabilities can
exchange information within a distance of about 10 meters without requiring a physical connection. You can
even beam information to a device in a different room, as long as it is within the Bluetooth signal coverage
range.
Bluetooth can be used in the following ways:
• Beam information, such as ﬁles, appointments, tasks, and contact cards, between devices that have
Bluetooth capabilities.
• Synchronize information between your phone and computer via Bluetooth.
• Use a Bluetooth-enabled headset with your phone for hands-free phone conversations. A Bluetooth
stereo headset can also be used for listening to music.
• Use a Bluetooth service. Once you connect your phone to another device or computer using Bluetooth,
you can locate and use any of the services available on that device.
• Use your phone as a Bluetooth modem for a computer.
Getting Connected 55
Bluetooth modes
Bluetooth on your phone operates in three different modes:
1. On. Bluetooth is turned on. Your phone can detect other Bluetooth-enabled devices, but not vice versa.
2. Oﬀ. Bluetooth is turned oﬀ. In this mode, you can neither send nor receive information using
Bluetooth. You might want to turn oﬀ the radio at times to conserve battery power, or in situations
where radio use is prohibited, such as onboard an aircraft and in hospitals.
3. Visible. Bluetooth is turned on, and all other Bluetooth-enabled devices within range can detect your
phone.
Note By default, Bluetooth is turned off. If you turn it on, and then turn off your phone, Bluetooth also turns off. When
you turn on your phone again, Bluetooth automatically turns on.
To turn on or off Bluetooth on your phone
You can enable Bluetooth by clicking the On/Off switch in Comm Manager. You can also do the following:
1. On the Home screen, click Start > Settings > Connections > Bluetooth.
2. In Bluetooth, select On.
3. Click Done.
To turn off Bluetooth capabilities on your phone, in Bluetooth, select Off.
To make your phone visible
1. On the Home screen, click Start > Settings > Connections > Bluetooth.
2. In Bluetooth, select Visible.
3. Enter a Bluetooth phone name for your phone. This will be the phone name that will be shown on
another Bluetooth-enabled device when it searches and detects your phone.
4. Click Done.
Note Selecting the Visible option on the Bluetooth screen also turns on Bluetooth.
Bluetooth partnerships
A Bluetooth partnership is a relationship that you create between your phone and another Bluetooth-enabled
device in order to exchange information in a secure manner.
Creating a partnership between two devices involves entering the same passcode on both devices, and this
is a one-time process. Once a partnership is created, the devices can recognize the partnership and exchange
information without entering a PIN again. Make sure the two devices are within a range, and Bluetooth is
turned on and in visible mode.
To create a Bluetooth partnership
1. On the Home screen, click Start > Settings > Connections > Bluetooth.
2. Click Menu > Devices.
3. Click Menu > New to search for a new device.
Your phone searches for other Bluetooth-enabled devices and lists them.
4. Select the desired device name in the list.
5. Click Next.
6. Enter a passcode (1 up to 16 characters) to establish a secure connection, then click Next.
56 Getting Connected
7. Wait for the paired device to accept the partnership:
• If you are creating a Bluetooth partnership between your phone and another Bluetooth-enabled
Pocket PC or phone, the receiving party needs to enter the same passcode that you specified.
• If you are creating a Bluetooth partnership between your phone and computer, a balloon message
will appear at the bottom-right of the computer screen, prompting your computer to accept the
partnership. Click the message then enter the passcode.
8. On your phone, a message will appear, indicating that your phone has connected with the paired
device. Click OK.
9. The name of the paired device is then displayed. You may edit and enter a new name for that device,
then click Next.
10. Select the check boxes of services that you want to use from the paired device. Click Done.
To accept a Bluetooth partnership
1. Ensure that Bluetooth is turned on and in visible mode.
2. Click Yes when prompted to establish a partnership with the other device.
3. Enter a passcode (the same passcode that is entered on the device requesting the partnership) to
establish a secure connection.
The passcode must be between 1 and 16 characters.
4. Click Next.
5. A message will appear, indicating that your phone has connected with the paired device. Click OK.
6. The name of the paired device is then displayed. You may edit and enter a new name for that device,
then click Next.
7. Select the check boxes of services that you want to use from the paired device.
8. Click Done.
You can now exchange information with the other device.
To change the display name of a Bluetooth device
1. On the Home screen, click Start > Settings > Connections > Bluetooth.
2. Click Menu > Devices.
3. Select a detected Bluetooth device.
4. Click Menu > Edit.
5. Enter a new display name for the Bluetooth device, then click Next.
6. Click Done.
To delete a Bluetooth partnership
1. On the Home screen, click Start > Settings > Connections > Bluetooth.
2. Click Menu > Devices.
3. Select a Bluetooth device.
4. Click Menu > Delete.
5. Click Done.
Getting Connected 57
Connect a Bluetooth hands-free or stereo headset
For hands-free phone conversations, you can use a Bluetooth hands-free headset such as a car kit with your
phone. Your phone also supports A2DP (Advanced Audio Distribution Profile) which is for stereo audio over
Bluetooth. This means that you can use a Bluetooth stereo headset with your phone for hands-free phone
conversations as well as for listening to stereo music. Make sure that your stereo headset also supports A2DP.
Just like when connecting to any Bluetooth device, you also need to enter a passcode when connecting to a
Bluetooth hands-free or stereo headset. The passcode is fixed and cannot be changed on a Bluetooth headset.
Before you connect it with your phone, check for the proper passcode in the manufacturer’s documentation.
To connect a Bluetooth hands-free or stereo headset
1. Make sure that both your phone and the Bluetooth headset are turned on and within close range,
and that the headset is visible. Refer to the manufacturer’s documentation to ﬁnd out how to set the
headset in visible mode.
2. On the Home screen, click Start > Settings > Connections.
3. Click Bluetooth > Menu > Devices.
4. Click Menu > New. Your device searches for other Bluetooth-enabled devices and displays them in the list.
5. Select the name of the headset, and click Next.
6. In Passcode, enter the alphanumeric passcode for the Bluetooth headset, then click Next.
7. Select the check box for the Hands Free service, and click Done.
Note If the Bluetooth stereo headset becomes disconnected, turn the headset on and repeat steps 1 to 3 above. Select
the stereo headset and click Menu > Set as Wireless Stereo.
Beam information using Bluetooth
You can beam information, such as contacts, calendar items, and tasks, as well as files from your phone to your
computer or to another Bluetooth-enabled device.
Note If your computer does not have built-in Bluetooth capabilities, you need to connect and use a Bluetooth adapter
or dongle on your computer.
To beam information from your phone to a computer
1. Set Bluetooth on your phone to visible mode. For information about this, see “To make your phone visible”.
2. Next, set Bluetooth on your computer to visible mode, create a Bluetooth partnership, then enable
your computer to receive Bluetooth beams.
58 Getting Connected
If your computer has Windows XP SP2 and your computer’s built-in or external Bluetooth adapter is
supported by Windows XP SP2, do the following steps:
a. On your computer, open Bluetooth Devices from the Control Panel then click the Options tab.
b. Select the Turn discovery on and the Allow Bluetooth devices to connect to this computer
options.
c. Create a Bluetooth partnership between your phone and computer. For information about creating
a partnership, see “Bluetooth partnerships”.
d. In the Options tab of Bluetooth Devices, select Show the Bluetooth icon in the notiﬁcation area.
e. To enable your computer to receive Bluetooth beams, right-click the Bluetooth icon at the bottomright of your computer screen. A menu then opens. Click Receive a File.
Whereas if the Bluetooth adapter on your computer was installed using a third-party provided driver,
do the following steps:
a. Open the Bluetooth software that came with the Bluetooth adapter. This software varies by
manufacturer, but in most cases, you will find a Bluetooth Configuration utility which you can
open from the Control Panel.
b. Click the Accessibility tab in the Bluetooth Configuration dialog box, then select Let other
Bluetooth devices to discover this computer.
c. Create a Bluetooth partnership between your phone and computer. For information about creating
a partnership, see “Bluetooth partnerships”.
d. Refer to the Bluetooth adapter’s documentation for instructions on how to enable your computer to
receive Bluetooth beams.
3. Now you are ready to beam. On your phone, select an item to beam. The item can be an appointment
in your calendar, a task, a contact card, or a file.
4. Click Menu > Beam [type of item].
5. Select the device name to which you want to beam to.
6. Click Beam.
7. If you beamed a calendar, task, or contact item to your computer and it is not automatically added to
Outlook, click File > Import and Export to import it to Microsoft Outlook on your computer.
To beam information to a Bluetooth-enabled device such as another phone, create a Bluetooth partnership
and then perform the steps 3 to 6 in the above procedure.
Notes
• If the computer or device you want to beam to cannot be detected by your phone, make sure that it is turned on,
visible, and within close range of your phone.
• The default folder on your computer where beamed items are stored may be
C:\Documents and Settings\your_username\My Documents.
• If your computer’s Bluetooth adapter was installed using a third-party provided driver, the folder location where it
stores beamed items will be indicated in the Information Exchange tab of the Bluetooth Configuration utility.
Use the phone as a Bluetooth modem
You can connect your phone to a notebook or desktop computer through Bluetooth and use the phone as a
modem for the computer.
For the computer to use the Internet connection of your phone, activate Internet Sharing on your phone, then
set up a Bluetooth Personal Area Network (PAN) between the computer and your phone.
1. On your phone, turn on Bluetooth and set it to Visible mode.
2. Initiate a Bluetooth partnership from your phone by following the steps in “To create a Bluetooth
partnership.“
Getting Connected 59
Alternatively, you can initiate a Bluetooth partnership from the computer by following these steps
(based on Windows XP SP2):
a. In the Control Panel or System Tray, double-click the Bluetooth Devices icon.
b. In the Bluetooth Devices window, click Add.
c. The Add Bluetooth Device Wizard opens. Select the My device is set up and ready to be found
check box, then click Next.
d. The wizard then detects your phone and displays its name in the dialog box. Select the phone name,
then click Next.
e. Select Let me choose my own passkey, then enter a passkey (1 up to 16 digits) that will serve as an
identification number for establishing a secure connection between your phone and the computer.
Click Next.
f. A confirmation message then appears on your phone. Click Yes to accept the connection, enter the
same passcode, then click Next.
g. On the computer, click Finish to exit the wizard.
h. On your phone’s Partnership Settings screen, you can change the display name for the computer,
then click Finish.
3. Now, open the Internet Sharing program on your phone. Click Start > Internet Sharing.
4. Select Bluetooth PAN as the PC Connection.
5. From the Network Connection list, select the name of the connection that your phone uses to
connect to the Internet.
6. Click Connect.
7. On your computer, set up a Bluetooth Personal Area Network (PAN) with your phone:
a. Click Start > Control Panel > Network Connections.
b. Under Personal Area Network, click the Bluetooth Network Connection icon.
c. Under Network Tasks, click View Bluetooth network devices.
d. In the Bluetooth Personal Area Network Devices dialog box, select your phone, then click Connect.
8. On the Internet Sharing screen on your phone, check if a connected status is displayed, which indicates
that your computer has been successfully connected to the Internet using your phone as a Bluetooth
modem.
60 Getting Connected
Chapter 6
Exchanging Messages and
Using Outlook
6.1 Using E-mail and Text Messages
6.2 Using MMS Messages
6.3 Using Pocket MSN Messenger
6.4 Using Calendar
6.5 Using Contacts
6.6 Using Tasks
6.7 Using Voice Notes
62 Exchanging Messages and Using Outlook
6.1 Using E-mail and Text Messages
Messaging is where all of your e-mail accounts and your text message account are located. You can send and
receive Outlook e-mail, Internet e-mail through an Internet service provider (ISP), and text messages. You can
also access e-mail from work using a virtual private network (VPN) connection.
Set up Outlook E-mail
When starting ActiveSync on your computer for the first time, the Synchronization Setup Wizard prompts you
to set up a synchronization relationship. This allows you to synchronize Outlook e-mail and other information
between your phone and your computer or the Exchange Server. If you have already set up synchronization
through the wizard, then your phone is ready to send and receive Outlook e-mail. For information about the
Synchronization Setup Wizard, see “To install and set up ActiveSync on the computer” in Chapter 3.
If you have not set up a synchronization relationship yet, do the following to set up your phone to synchronize
Outlook e-mail:
1. To set up and connect to an over-the-air connection (1xRTT, 1xEVDO, or ISP dial-up) to synchronize
remotely, follow the procedures in “Connecting to the Internet” in Chapter 5.
2. Disconnect your phone from your computer or LAN. (If you have an over-the-air connection, there is no
need to disconnect.)
3. Click Start > ActiveSync.
4. If you want to synchronize e-mails directly with the Exchange Server on a private network such as your
corporate network, follow the steps in “Synchronize Outlook information with Exchange Server” in
Chapter 3.
5. Choose which information types to synchronize. Make sure E-mail is selected. For details, follow the
steps in “To change which information is synchronized” in Chapter 3.
Every time you want to manually send or receive Outlook e-mail on your phone, just connect your phone to
your computer, LAN, or over-the-air connection, then click Sync on the ActiveSync screen or click Menu >
Send/Receive in Outlook on your phone.
For details about scheduling automatic synchronization or setting a synchronization time with the Exchange
Server, see “Schedule synchronization with Exchange Server” in Chapter 3.
Set up a POP3/IMAP4 e-mail account
You need to set up an e-mail account that you have with an Internet service provider (ISP) or an account that
you access using a VPN server connection (typically a work account) before you can send and receive e-mail.
1. On the Home screen, click Start > Messaging > New Account.
Note You can also open Messaging by pressing
and then
from the QWERTY keyboard.
2. In Your e-mail provider, select Other (POP3/IMAP) then click Next.
3. In Your name, enter your display name for e-mail messages.
4. In E-mail address, enter the e-mail address for this account.
5. Select Attempt to obtain e-mail settings from the Internet and click Next.
Auto configuration attempts to download necessary e-mail server settings so that you do not need to enter
them manually. If the account is set up successfully, you will be prompted to send and receive e-mail.
If Auto configuration is unsuccessful or you have an account you access using a VPN server connection,
contact your ISP or network administrator for the following information and enter it manually:
Exchanging Messages and Using Outlook 63
Setting
User name
Password
Domain
Server type
Account name
Network
Incoming server
Require SSL
connection
Outgoing server
Outgoing
server requires
authentication
Outgoing server
settings
Use different user
name for outgoing
server
User name
Password
Domain
Require SSL
connection (Outgoing
mail server only)
Description
Enter the user name assigned to you by your ISP or network administrator. This is often the first
part of your e-mail address, which appears before the at sign (@).
Choose a strong password. You have the option to save your password so you do not need to
enter it each time you connect to your e-mail server.
Not required for an account with an ISP. May be required for a work account.
Select POP3 or IMAP4.
Enter a unique name for the account, such as “Work” or “Home.” This name cannot be changed
later.
Enter the type of network your e-mail server connects to.
Enter the name of your e-mail server (POP3 or IMAP4).
Select this to ensure you always receive e-mail for this account using an SSL connection. This
enables you to receive personal information more securely. Please note that if you select this
and your ISP does not support an SSL connection, you will not be able to connect to receive
e-mail.
Enter the name of your outgoing e-mail server (SMTP).
Select this if your outgoing e-mail server (SMTP) requires authentication. Your user name and
password from above will be used.
Your outgoing e-mail server may require different authentication settings than your incoming
e-mail server.
Select this if your outgoing e-mail server requires a different user name and password than the
ones you entered before.
Enter your user name for the outgoing e-mail server.
Enter your password for the outgoing e-mail server.
Enter the domain of the outgoing e-mail server.
Select this to ensure you always send e-mail from this account using an SSL connection. This
enables you to send personal information more securely. Please note that if you select this and
your ISP does not support an SSL connection, you will not be able to send e-mail.
Send and receive messages
To compose and send an e-mail or text message
1. On the Home screen, click Start > Messaging.
2. Select an e-mail account, or select Text Messages. Then, click Select.
3. Click New.
4. Enter the e-mail address or phone number of one or more recipients, separating them with a
semicolon (;). To access addresses and phone numbers from Contacts, in To, press ENTER and select a
recipient from the list.
5. Enter a message.
6. Click Send.
Note If you are working offline, e-mail messages are moved to the Outbox folder and will be sent the next time you
connect. Text messages are sent immediately.
Tips
• To set the priority of an e-mail message, click Menu > Message Options.
• To cancel any message, click Menu > Cancel Message.
• If you are sending a text message and want to know if it was received, before sending the message, click Menu >
Message Options. Select Request message delivery notification.
• If you want the recipient to call you back after receiving your message, before sending the message, click Menu >
Message Options, select Send a callback number, enter a number, and click Done.
64 Exchanging Messages and Using Outlook
To reply to or forward a message
1. From an open message, click Reply, or click Menu > Reply All or Forward.
2. Enter a message in the message area.
3. Click Send.
Notes If you are replying to or forwarding e-mail from Outlook E-mail, you will send less data if you do not edit the
original message. This may reduce data transfer costs based on your rate plan.
To exclude your e-mail address when replying to all
When you reply to all the recipients of an e-mail, your own e-mail address will also be added to the recipient
list. You can customize ActiveSync so that your e-mail address will be excluded from the recipient list.
1. On the Home screen, click Start > ActiveSync.
2. Click Menu > Options.
3. Select E-mail, and click Settings.
4. Click Menu > Advanced.
5. In the Primary e-mail address text box, enter your e-mail address.
6. Click Done.
To add an attachment to an e-mail message
1. In a new message, click Menu > Insert and then click Picture or Voice Note.
2. Select the picture you want to attach, or record a voice note.
To download attachments
• In an open message with an attachment, select the attachment. The attachment is downloaded the
next time you synchronize or connect to your e-mail server and send and receive e-mail.
Download messages
The manner in which you download messages depends on the type of account you have:
• To send and receive e-mail for an Outlook E-mail account, begin synchronization using ActiveSync. For
more information, see “Set up Outlook e-mail” in this chapter.
• To send and receive e-mail messages for an e-mail account that you have with an Internet Service
Provider (ISP) or that you access using a VPN server connection (typically a work account), download
Exchanging Messages and Using Outlook 65
messages through a remote e-mail server. For more information, see "To download messages from the
server" in this chapter.
• Text messages are automatically received when your phone is turned on. When your phone is turned
oﬀ, messages are held by your service provider until you turn on your phone again.
To download messages from the server
To send and receive e-mail messages for an e-mail account that you have with an Internet Service Provider
(ISP) or that you access using a VPN server connection (typically a work account), you first need to connect to
the Internet or your corporate network, depending on the account.
1. On the Home screen, click Start > Messaging.
2. Select the e-mail account.
3. Click Menu > Send/Receive. The messages on your phone and e-mail server are synchronized as
follows: new messages are downloaded to the phone Inbox folder, messages in the phone Outbox
folder are sent, and messages that have been deleted from the server are removed from the phone
Inbox folder.
Tip
If you want to download the entire message, select the message and click Menu > Download Message. The
remainder of the message will be downloaded the next time you send and receive e-mail.
Individually sign and encrypt a message
Encrypting an Outlook e-mail message protects the privacy of the message by converting it from plain,
readable text into cipher (scrambled) text. Only the recipient who has the authorization key can decipher the
message.
Digitally signing a message applies your certificate with the authorization key to the message. This proves to
the recipient that the message is from you and not from an imposter or a hacker, and that the message has
not been altered.
To digitally sign and encrypt a new message
1. In the message list, select Outlook E-mail.
2. Click New.
3. Click Menu > Message Options.
4. In the Security ﬁeld, select the Encrypt message and Sign message check boxes then click Done.
66 Exchanging Messages and Using Outlook
Verify the digital signature on a signed message you receive
To verify a digital signature in the message that you receive, do the following:
1. Open the Outlook e-mail message that has been digitally signed.
2. At the top of the message, click View Signature Status.
3. Click Menu > Check Certiﬁcate.
4. To view the details of the certiﬁcate in the message, click Menu > View Certiﬁcate.
Note There can be several reasons why a digital signature is not valid. For example, the sender’s certificate may
have expired, it may have been revoked by the certificate authority, or the server that verifies the certificate is
unavailable. Contact the sender to report the problem.
Manage folders
Each Messaging account has its own folder hierarchy with five default Messaging folders: Inbox, Outbox,
Deleted Items, Drafts, and Sent Items. The messages you receive and send through the account are stored in
these folders. You can also create additional folders within each hierarchy. Folders for e-mail accounts behave
differently depending on the type of e-mail account you have.
If you set up an Outlook E-mail account to sync with Exchange Server or a desktop PC, e-mail messages in the
Inbox folder in Outlook will be synchronized automatically with your phone. You can select to synchronize
additional folders by designating them for synchronization. The folders you create and the messages you move
will then be mirrored on the e-mail server. For example, if you move two messages from the Inbox folder to a
folder named Family, and you have designated Family for synchronization, the server creates a copy of the Family
folder and copies the messages to that folder. You can then read the messages while you are away from your PC.
You can only create and delete folders on devices when you are connected to an Exchange e-mail server.
Similar to the Outlook account, if you set up an account to send and receive mail using an IMAP4 e-mail
server, all messages on the phone are copies of the messages on the server. The folders you create locally
on the phone and the e-mail messages you move to these folders are mirrored on the e-mail server. Moving
a message on the phone moves the copy on the server the next time you send and receive e-mail for that
account. Therefore, messages are available to you anytime you connect to your e-mail server, whether it is
from your phone or PC. This synchronization of folders occurs whenever you connect to your e-mail server,
create new folders, or rename/delete folders when connected. You can also set different download options for
each folder.
If you set up an account to send/receive mail using a POP3 e-mail server, e-mail messages you move to the
Deleted Items folder on the phone will break the link between the messages on the phone and their copies
on the e-mail server. The next time you connect to send and receive mail, the e-mail server will detect the
messages that are in the Deleted Items folder on the phone and will delete those messages from the e-mail
server. All other messages in other folders remain on both the phone and the e-mail server.
Exchanging Messages and Using Outlook 67
6.2 Using MMS Messages
Creating and sending Multimedia Message Service (MMS) messages to your friends and family is fun and easy.
You can include or capture photos or video clips, include or record audio, add text, then send them along with
your MMS message.
To access MMS
Do any of the following:
• On the Home screen, click Start > Messaging > MMS.
• From the Pictures & Videos program, select a picture in My Pictures, and click Menu > Send. Select
MMS as the messaging account to send the picture along with the message.
• From the Camera program, capture a photo or an MMS video clip then click (
Send via MMS and click Send.
). In the menu, select
To access MMS message folders
• Click Start > Messaging > MMS, then click Menu > Folders.
MMS Message Folders
Edit MMS settings
When you send an MMS message, an SMS notification message will first be sent to the recipient, while your
MMS message will be temporarily stored on an MMS server of your wireless service provider. When others
send you an MMS message, similarly, the MMS message will be stored on the MMS server, waiting for you to
retrieve it. Hence, your phone must be configured with the location of the MMS server for you to be able to
send and receive MMS messages on your phone.
When you purchase your phone, it is already preset with your wireless service provider’s MMS server settings.
If you accidentally lost the preset settings or you changed to another wireless service provider, follow the
steps below to configure MMS settings.
To configure MMS settings
1. On the MMS main screen, click Menu > Options > Account Settings to open the Preferences screen.
2. Select or clear the provided check boxes according to your needs. You can choose to keep track of your
MMS messages, retrieve messages immediately, accept or reject messages, request a delivery or read
receipt. You can also specify a resolution for images you send and message delivery attempts.
3. On the Preferences screen, click Menu > MMSC Settings > Edit to access Multimedia Messaging
Service Center (MMSC) settings.
68 Exchanging Messages and Using Outlook
4. Check if your phone is preset with MMS server settings.
If there are no preset settings, click Menu > New on the MMSC Settings screen and enter the following
information, which you can get from your wireless service provider:
• Name. A descriptive name, such as your wireless service provider name.
• MMSC URL. URL address of the MMS server.
• WAP Gateway. Location of the MMS server, which is usually in the form of an IP address.
• Port. HTTP port number used for connecting to the MMS server and for file transfer.
• Connect Via. Select the connection your phone uses for MMS.
• Max. Sending Size. Select the maximum MMS message size allowed by your wireless service
provider.
• WAP Version. Select either WAP 1.2 or WAP 2.0, depending on which one is being used by your
wireless service provider.
5. Click Done.
The MMS server settings will then be added as an entry on the MMS Conﬁguration screen.
Note If you add several MMS service providers to the MMSC Settings screen, you can choose one as your default MMS
provider. Select the MMS provider’s name in the list, then click Menu > Set as Default.
Create and send MMS messages
You can compose MMS messages in a combination of various slides, where each slide can consist of a photo,
audio or video clip, and/or text.
Notes
• Please note that MMS is a charged service. In order to use MMS successfully, this has to be provisioned on your
mobile account. Please contact the wireless service provider to have this provisioned as part of your calling plan.
• Please ensure the size of the MMS is within the limits of the wireless service provider if sending to another mobile
phone user or sending to an e-mail address.
To start composing an MMS message
1. On the Home screen, click Start > Messaging > MMS > New.
2. On the Compose New screen, select either New Flix Message or New Pix Message based on whether
you want to send video clip(s) or picture(s) with the message.
3. In To, enter the recipient’s phone number or e-mail address directly, or press ENTER to choose a phone
number or an e-mail address from Contacts. You can also click Menu > Recipients > Add to add a new
contact entry.
Exchanging Messages and Using Outlook 69
4. In Subject, enter a subject for your message.
5. Click either Insert Picture or Insert Video to select a photo or video clip from the Select Media screen
and insert it.
6. Enter text and insert audio clips (only available if you have selected New Pix Message) by clicking the
respective ﬁelds.
7. Click Send to send the message.
Note To send a copy of this message to others, access Cc and Bcc by clicking Menu > Send Options. In these fields,
enter the recipient‘s phone number or e-mail address or click Menu > Recipients > Add to add from Contacts.
The following symbols act as shortcuts to some of the options on the MMS Message screen.
• Click
to go to the previous slide.
• Click
to go to the next slide.
Composing an MMS (New Pix Message)
To create an MMS message from a template
• On the blank MMS message screen, click Menu > Template > New from Template to compose a
message using a predeﬁned template.
Note To save a message as a template, create a message or open an existing message, and click Menu > Template >
Save as Template.
To insert a photo or video clip into an MMS message
You can add either a still image or a video clip to each individual slide on the MMS message screen depending
on which MMS message you have chosen. It can be either a new video message (New Flix Message) or a new
picture message (New Pix Message).
1. Click Insert Picture or Insert Video to insert a photo or video clip.
2. Select a picture or video clip on the Select Media screen. This is the My Pictures folder where images
and video clips are displayed in thumbnail view. To navigate to any other folder containing pictures or
videos, click Menu > Change Folder.
3. Select a photo or video clip using NAVIGATION, and click Select or Menu > Select to insert it.
On the Select Media screen, you can view the thumbnails in list view, open an item to view it, or delete an
item by clicking Menu and choosing the appropriate option. You can even discard this photo or video clip by
pressing BACK. To capture a new photo or video clip and send it immediately with the message, click Menu >
Capture > Picture or Menu > Capture > Video. The newly captured photo or video clip is automatically
inserted into your message.
70 Exchanging Messages and Using Outlook
To add predefined text to an MMS message
You can instantly add text to any slide from a list of predefined words or phrases, called My Text.
• On the MMS message screen, click Insert Text > Menu > My Text and then click Select to add a text
string from the My Text list.
Note To edit or delete a phrase on the My Text list, select a text string and click Menu > Delete. To create and add a new
phrase to the list, click Menu > New.
To add emoticons or Favorites URLs to an MMS message
Add emoticons or Favorites URLs to your messages.
• On the MMS message screen, click Insert Text > Menu > Insert Emoticon or Add Favorite. In the
screen that opens, select the emoticon or URL you want to add then click Select .
Note The MMS Favorites list is based on the Internet Explorer Mobile Favorites list.
To add an audio clip to an MMS message
You can add audio clips to your MMS messages while sending pictures (when you select New Pix Message).
However, you can add only one audio clip per slide.
1. Click Insert Audio to insert an audio clip.
Select an audio clip on the Select Audio screen.
Note By default, the audio clips listed on the Select Audio screen are from the My Sounds folder. To navigate to any
other folder containing audio clips, click Menu > Change Folder.
2. Select an audio clip using NAVIGATION, and click Select or Menu > Select to insert it.
Note You can play and listen to the audio clip by clicking Menu > Play before you insert it.
Otherwise, to record a new audio clip, click Menu > Capture Audio. Then click Record to start
recording and Stop to stop recording. Click Play to listen to the new audio clip you captured, then click
Done.
Click Select to add the audio file to the MMS message.
Note The Insert Audio option is not available while composing a New Flix Message as it is assumed that the video clip
to be sent with the message is accompanied with audio, by default.
To set options for an MMS message
While composing an MMS message, you can set the following options for the message by clicking Menu.
Option
Recipients
Insert Media
Remove Media
Slides
Template
Capture
Cancel Message
Attachments
Send via SMS
Preview Message
Options
Background
Text Layout
Send Options
Allows you to
Specify the phone number or e-mail address of the recipient(s).
Choose the type of media you want to insert to your MMS message.
Choose the type of media you want to delete from the MMS message.
Add and remove slides, view the next or previous slides, and specify the duration of slides.
Compose a message using a predefined template, and save a composed or existing message as a
template.
Capture a photo, audio or video clip to be inserted into the message.
Cancel the message and go back to the MMS Messaging folders screen.
Choose to attach a vCard, vCalendar, or other file.
Only the text portion of your message will be sent. All other media will be discarded.
Play back the contents of the MMS message before sending it.
Choose a background color from the list.
Change the position of the text. Click Menu to select a text layout.
Specify the message delivery time, validity, priority, class, and other settings for a message.
Exchanging Messages and Using Outlook 71
View, reply, and block MMS messages
To receive MMS messages
• On any MMS message folder screen, click Menu > Send/Receive.
By default, messages are automatically downloaded to your phone.
To view an MMS message
You can view MMS messages in several ways.
• Press ENTER to view and play the message on your phone. Click Pause or Menu > Stop to pause or stop
the playback of the message.
• Click Menu > Object View to see a list of ﬁles included in the message. To open a ﬁle, select it and click
Open. To save a ﬁle, select it, and click Save, Menu > Save Audio, or Menu > Save Photo.
• View each slide included in the message by clicking Menu > Next.
To reply to an MMS message
• Click Menu > Reply > Reply to reply to the sender of the message, or click Menu > Reply > Reply All
to reply to all persons listed in the To and CC boxes of the message. Click Menu > Reply > Forward to
forward the message to someone else.
To block a phone number from sending you MMS messages
You can choose to block a phone number from sending you MMS messages if you do not want to receive
future MMS messages from that number.
1. View the MMS message then click Menu > Show Message Details.
2. In the MMS Details screen, select the contact in the From ﬁeld then click Menu > Open.
3. Select the number on the screen then press ENTER. On the menu that opens, click Save to Blacklist.
Note By adding the number to the Blacklist, you will not be able to receive future MMS messages from that number. To
edit the MMS Blacklist, on the MMS message screen, click Menu > Options > Account Settings > Menu > Edit
Blacklist. Here you can remove a number from the Blacklist.
6.3 Using Pocket MSN Messenger
Pocket MSN Messenger delivers the features of MSN Messenger to your phone. With Pocket MSN Messenger,
you can do the following:
• Send and receive instant messages.
• See which contacts are online or oﬄine.
• Subscribe to status updates for selected contacts so you know when they come online.
• Block contacts from seeing your status or sending you messages.
Before you can use MSN Messenger, your phone must be connected to the Internet. For information about
setting up an Internet connection, see “Connecting to the Internet” in Chapter 5.
Important Note You must have either a Microsoft .NET Passport or a Hotmail account to use MSN Messenger. If you
have a Hotmail.com or MSN.com e-mail address, you already have a Passport. To get a Passport
account, go to http://www.passport.com. To get a Hotmail account, go to http://www.hotmail.com.
To start MSN Messenger
On the Home screen, click Start > Pocket MSN > MSN Messenger.
72 Exchanging Messages and Using Outlook
To sign in or out
• On the main MSN Messenger screen, click Sign In. Enter the e-mail address and password for your
Passport or Hotmail account, and click Sign In.
Signing in may take several minutes, depending on the connection speed.
• To sign out, click Menu > Sign Out.
To add or delete contacts
• To add a contact, click Menu > Add Contact, and follow the instructions on the screen.
• To delete a contact, select the contact and click Menu > Delete Contact.
To send an instant message
1. Click the contact to whom you will send a message.
2. Enter your message in the text entry area at the bottom of the screen, and click Send.
Note To quickly add common phrases, click Menu > My Text and select a phrase in the list.
To block or unblock contacts
• To block a contact from seeing your status and sending you messages, select the contact and click
Menu > Block.
• To unblock a contact, select the contact, and click Menu > Unblock.
To change your own Messenger status
1. Click your own name at the top of the screen.
Your current status is indicated by a bullet point in the displayed list.
2. Select a status (such as Out To Lunch) from the list.
To change your display name
1. Click Menu > Options.
2. In My display name, enter the name you want to display to others in MSN Messenger then click Done.
6.4 Using Calendar
Use Calendar to schedule appointments, including meetings and other events. Your appointments for the
day can be displayed on the Home screen. If you use Outlook on your PC, you can synchronize appointments
between your phone and PC. You can also set Calendar to remind you of appointments with a sound or
flashing light, for example.
To schedule an appointment
1. On the Home screen, click Start > Calendar.
2. Click Menu > New Appointment.
3. Enter information about the appointment.
4. To schedule an all-day event, in End time, select All day event.
5. Click Done.
Note All-day events do not occupy blocks of time in Calendar; instead, they appear in banners at the top of the calendar.
Exchanging Messages and Using Outlook 73
To make an appointment recurring
1. On the Home screen, click Start > Calendar.
2. Click the appointment and click Edit.
3. Scroll to Occurs and click one of the recurrence options.
4. Click Done.
To view your schedule
You can view your schedule in three different views: Month, Week, and Agenda.
1. On the Home screen, click Start > Calendar.
2. Do one of the following:
• Click Menu > Month View.
• Click Menu > Week View.
• Click Menu > Go to Today, or from Week or Month view, click Menu > Agenda View.
To send a calendar appointment
You can send a calendar appointment to another phone over MMS.
1. On the Home screen, click Start > Calendar.
2. Select an appointment, then click Menu > Send as vCalendar.
3. Enter the recipient in the To line of the MMS message, then click Send.
Tip
You can also beam an appointment or a calendar item.
6.5 Using Contacts
Contacts is your address book and information storage for the people and businesses you communicate with.
Store phone numbers, e-mail addresses, home addresses, and any other information that relates to a contact,
such as a birthday or an anniversary date. You can also add a picture or assign a ring tone to a contact.
From the contact list, you can quickly communicate with people. Click a contact in the list for a summary of
contact information. From there, you can call or send a message.
If you use Outlook on your PC, you can synchronize contacts between your phone and PC.
To create a new contact on your phone
1. On the Home screen, click Start > Contacts > New.
2. Enter information for the new contact.
3. Click Done.
Tips
• If someone who is not in your list of contacts calls you or sends you a message, you can quickly create a contact
from Call History or from the message by clicking Menu > Save to Contacts.
• In the list of contact information, you will see where you can add a picture or assign a ring tone to a contact.
To view and edit a contact information
1. On the Home screen, click Start > Contacts.
2. Click the contact whose information you want to view.
74 Exchanging Messages and Using Outlook
3. To edit the information, click Menu > Edit.
4. When ﬁnished making changes, click Done.
To call a contact from the contact list
1. On the Home screen, click Start > Contacts.
2. Click the contact to call.
3. Press TALK ( ). The contact’s default phone number is dialed.
Tip
To call a phone number other than the default, click the contact, scroll to the number you want to dial, and press
TALK ( ).
To send an e-mail to a contact
1. On the Home screen, click Start > Contacts.
2. Click the contact.
3. Click the e-mail address.
4. Select the e-mail account to use.
5. Enter a subject, compose your message, and click Send.
To send a text message to a contact
1. On the Home screen, click Start > Contacts.
2. Click the contact, and click Menu > Send Text Message.
3. Compose your message, and click Send.
To find a contact
1. On the Home screen, click Start > Contacts.
2. If you are not in Name view, click Menu > View By > Name.
3. Do one of the following:
• Begin entering a name or phone number of the contact until the contact is displayed. Pressing more
than one key continues to narrow down the search.
• Filter the list by categories. In the contact list, click Menu > Filter. Then click a category you have
assigned to a contact. To show all contacts again, select All Contacts.
• Locate the contact by company. In the contact list, click Menu > View By, and click Company. Click
the company to see the contacts who work there.
To send contact information of someone to another person through text message
1. On the Home screen, click Start > Contacts then select the contact whose information you want to
send.
2. Click Menu > Send Contact > Text Message. Select the contact information that you want to send
and click Done.
3. In the new text message, enter the address of the person to whom you are sending the contact
information and click Send.
Exchanging Messages and Using Outlook 75
To find a contact online
In addition to having contacts on your phone, you can also access contact information from your
organization’s Global Address List (GAL). GAL is the address book that contains all user, group, and distribution
list e-mail addresses of your organization, and it is stored on the Exchange Server. By having direct online
access to it from your phone, it is quick and easy for you to plan a meeting and e-mail a meeting request
immediately to anyone in your organization.
Access to the GAL is available if your organization is running Microsoft Exchange Server 2003 SP2 and you
have completed your first synchronization with the Exchange Server.
1. Synchronize with Exchange Server if you have never done so.
2. Click Start > Contacts > Menu > View By > Name.
3. Do either of the following:
• In Contacts, click Menu > Find Online.
• In a new message, in the To box, click Menu > Add Recipient > Menu > Find Online.
4. Enter the contact name and click Find. Select one contact in the result list and click Select.
Notes
• Your phone must be set up with a data connection.
• You can search on the following information as long as that information is included in your organization’s GAL:
First name, Last name, E-mail name, Display name, E-mail address, or Office location.
76 Exchanging Messages and Using Outlook
To filter the contact list
Contacts that have categories assigned are displayed in the list when you filter by category.
1. On the Home screen, click Start > Contacts.
2. Click Menu > Filter.
3. Click a category to ﬁlter.
To assign a ring tone to a contact
To easily identify who is calling you, you can assign a custom ring tone to each contact.
1. On the Home screen, click Start > Contacts.
2. Click the contact you want to assign a ring tone to.
3. Click Menu > Edit.
4. Click Custom ring tone and select the ring tone you want.
5. Click Done.
To assign a picture to a contact
1. On the Home screen, click Start > Contacts.
2. Click the contact.
3. Click Menu > Edit.
4. Click Picture.
5. Click the picture you want to add.
To send a contact’s details
You can send a contact card to another phone over MMS.
1. On the Home screen, click Start > Contacts.
2. Select a contact, then click Menu > Send as vCard.
3. Enter the recipient in To of the MMS message, then click Send.
6.6 Using Tasks
Use Tasks to keep track of things you need to do. A task can occur once or repeatedly (recurring). You can set
reminders for your tasks and you can organize them using categories. Your tasks are displayed in a task list.
Overdue tasks are displayed in red.
To create a task
1. On the Home screen, click Start > Tasks.
2. In the Enter new task here box, enter the task name and press ENTER.
Notes
• You can synchronize information on your phone with your PC to keep your task list up to date in both locations.
• If you create a new task with a reminder on your PC and then synchronize tasks with your phone, the reminder will
play at the time that was set on your PC.
Exchanging Messages and Using Outlook 77
To delete a task
1. On the Home screen, click Start > Tasks.
2. Select the task, and click Menu > Delete Task.
To locate a task
1. On the Home screen, click Start > Tasks.
2. In the task list, do one of the following:
• To sort the list, click Menu > Sort by, and click a sort option.
• To filter the list by category, click Menu > Filter, and click the category you want displayed.
Note Categories appear only in tasks that are synchronized with your PC.
Tip
To filter your tasks further, click Active Tasks or Completed Tasks.
To mark a task as completed
1. On the Home screen, click Start > Tasks.
2. Select the task, and click Complete.
6.7 Using Voice Notes
Use Voice Notes to create short voice recordings. Voice notes are included in the All Notes list and are named
consecutively (Recording1, Recording2, and so on).
To create a voice note
1. On the Home screen, click Start > Voice Notes.
2. Hold the phone’s microphone near your mouth.
3. Click Record and say your voice note.
4. Click Stop to stop recording a voice note.
To delete a voice note
1. On the Home screen, click Start > Voice Notes.
2. Select the voice note to delete.
3. Click Menu > Delete.
4. Click Yes.
Tip
If you delete a voice note that has a default name, such as Recording1, this name becomes available for a new
voice note.
To listen to a voice note
1. On the Home screen, click Start > Voice Notes.
2. Select the voice note to play, and press ENTER.
Tip
To stop listening to the voice note, click Stop while the voice note is playing.
78 Exchanging Messages and Using Outlook
To use a voice note as a ring tone
1. On the Home screen, click Start > Voice Notes.
2. Select the voice note, and click Menu > Set As Ringtone.
Chapter 7
Experiencing Multimedia
7.1 Using Camera and Video Recorder
7.2 Using Pictures & Videos
7.3 Using Windows Media Player
7.4 Using Streaming Media
7.5 Using MIDlet Manager
80 Experiencing Multimedia
7.1 Using Camera and Video Recorder
Taking photos and shooting video clips with audio are easy with your phone’s built-in camera. The camera on
your phone operates in landscape orientation with the fullscreen preview.
To open Camera or Video Recorder
Do any of the following:
• On the Home screen, click Start > Camera.
• On the Home screen, click Start > Video Recorder.
• Press the CAMERA button.
To exit Camera or Video Recorder
• Press END ( ).
To capture photos and video clips
You can do one of the following to capture photos and video clips from the Camera screen:
• Press the CAMERA button to take a photo. Also, press the CAMERA button to start recording video, then
press it again to stop recording.
• Alternatively, you can press the ENTER button to take a photo. Also press this button to start recording
video; then press it again to stop recording.
Capture modes
The Camera program lets you capture pictures and video clips using various built-in modes. By default,
Camera opens in the capture mode you last accessed.
To change the capture mode
• On the Camera screen, press the right SOFT KEY
then use the left SOFT KEY (
Mode. Use NAVIGATION CONTROL to select a capture mode from the list.
) to navigate to
The available capture modes are as follows:
Capture mode
Photo (
Function
Captures standard still images.
Video (
Captures video clips, with or without audio.
MMS Video (
Captures video clips suitable for sending via MMS.
Contacts Picture (
Picture Theme (
Panorama (
Sports (
Captures a still image suitable for assigning as an identification photo to a contact.
Captures still images and places them within frames.
Captures a sequence of still images continuously in one direction, and allows stitching of all the
images to create a panoramic view of a scenery.
Captures a sequence of still images (3 or 5 frames) automatically for a short duration at a
defined frequency.

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2007:04:09 16:39:59+08:00
Create Date                     : 2007:04:09 16:39:48+08:00
Title                           : Book_Libra_Generic_English_Manual.indb
Creator                         : Adobe InDesign CS (3.0)
Producer                        : Adobe PDF Library 6.0
Page Count                      : 80
Mod Date                        : 2007:04:09 16:39:59+08:00
Creation Date                   : 2007:04:09 16:39:48+08:00
Metadata Date                   : 2007:04:09 16:39:59+08:00

EXIF Metadata provided by EXIF.tools

HTC LIBR100 Smart Phone with Bluetooth User Manual Book Libra Generic English Manual indb

HTC Corporation Smart Phone with Bluetooth Book Libra Generic English Manual indb

Contents

User Manual 1 of 2

FCC ID Filing: NM8LIBR100

Navigation menu

Namespaces

Views

Navigation