HUIZHOU GAOSHENGDA TECHNOLOGY W7ZM1100 WIFI Module User Manual

Hui Zhou Gaoshengda Technology Co.,LTD WIFI Module Users Manual

a href="https://usermanual.wiki/HUIZHOU-GAOSHENGDA-TECHNOLOGY" itemprop="url"> HUIZHOU GAOSHENGDA TECHNOLOGY >

User Manual

Hui Zhou Gaoshengda Technology Co., LTD                W7ZM1100 PAGE    1    OF  3 Version  1.0  WIFI Module IEEE 802.11 b/g/n 1T/1R   Model Number: W7ZM1100     The W7ZM1100 is a 2.4GHz WIFI 1×1 module. The WLAN operation supports 20MHz,40MHz channels for data rates up to 150Mbps. It fully complies with IEEE 802.11 b/g/n feature rich wireless connectivity at high standards,delivers reliable,cost-effective, throughput from an extended distance.                                         Product Name WIFI Module Model W7ZM1100 Standard  802.11 b/g/n   Interface USB Data    Transfer Rate  1,2,5.5,6,11,12,18,22,24,30,36,48,54,60,90 and maximum of 300Mbps   Modulation Method  DQPSK,DBPSK,CCK(802.11b) QPSK,BPSK,16QAM,64QAM with OFDM (802.11g) QPSK,BPSK,16QAM,64QAM with OFDM (802.11n) Frequency Band  2412~2462 MHz Operation Mode  Infrastructure   Security  WEP, TKIP, AES, WPA, WPA2   Operating Voltage 3.3V±10% Current Consumption <1000mA    Antenna Type PIFA Operating Temperature   0 ~ 60°C ambient temperature  Storage Temperature   -40 ~ 80°C ambient temperature   Humidity  5 to 95 % maximum (non-condensing)         Product Features Product Description ◆ Complies with IEEE 802.11b/g/n for 2.4GHz Wireless LAN. ◆One transmit and One receive path(1T1R) ◆ Works with all existing network nfrastructure. ◆Capable of up to 128-Bit WEP Encryption. ◆Freedom to roam while staying connected. ◆ UP to 150Mbps High-Speed Transfer Rate in 802.11n mode of operation. ◆ Operating Systems:Android,Linux,Win7,XP ◆ Low power consumption. ◆ Easy to install and configure. ◆High speed USB 2.0 interface ◆ROHS compliant     Product Specification
Hui Zhou Gaoshengda Technology Co., LTD                W7ZM1100 PAGE    2    OF  3 Version  1.0  FCC Statement    This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.  Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to  part  15  of  the  FCC  Rules.  These  limits  are  designed  to  provide  reasonable  protection  against  harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and,  if  not  installed  and  used  in  accordance  with  the  instructions,  may  cause  harmful  interference  to  radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to  radio or  television reception,  which can  be  determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.  If power exceeds the limit and the distance(Over 20cm distance in actual use between the device and user) is compliant with the requirement  FCC RF Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.  The device must be professionally installed  The intended use is generally not for the general public.It is generally for industry/commercial use.   The connector is within the transmitter enclosure and can only be accessed by disassembly of the transmitter that is not normally required.  the user has no access to the connector.  Installation must be controlled. Installation requires special training    Canada Statement   This  device  contains  licence-exempt  transmitter(s)/receiver(s)  that  comply  with  Innovation,  Science  and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:     (1) This device may not cause interference.   (2) This device must accept any interference, including interference that may cause undesired operation of the device.  L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux   CNR d'Innovation, Sciences et Développement  économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :      1)L'appareil ne doit pas produire de brouillage;     2)L'appareil  doit  accepter  tout  brouillage  radioélectrique  subi,  même  si  le  brouillage  est  susceptible  d'en compromettre le fonctionnement.
Download:
Mirror Download [FCC.gov]
Document ID4179949
Application IDQZb8qrsouCqX5WmwyzNgcg==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize22.66kB (283307 bits)
Date Submitted2019-02-25 00:00:00
Date Available2019-02-25 00:00:00
Creation Date2019-02-22 14:48:21
Producing SoftwareMicrosoft® Word for Office 365
Document Lastmod2019-02-22 14:48:21
Document TitleUsers Manual
Document CreatorMicrosoft® Word for Office 365
Document Author: zy
FCC ID Filing: 2AC23-W7ZM1100

Navigation menu