HUNAN FN LINK TECHNOLOGY 6223A-SRD WIFI+BT combo Module User Manual 15 6223A SRD UserMan

FN-LINK TECHNOLOGY LIMITED WIFI+BT combo Module 15 6223A SRD UserMan

Contents

15_6223A-SRD UserMan

欧智通科技
Fn-Link
6223A-SRD
WiFi Single-band 1X1 +
Bluetooth v2.1+EDR/Bluetooth
3.0/3.0+HS/4.2
User's Manual
6223A-SRD
FN-LINK TECHNOLOGY LIMITED 1Proprietary & Confidential Information
Revision History
Date Revision Content Revised By Version
2016-9-26 First Released William Tan 1.0
2016-12-19 Modified pin definition and BT version Colin Ming 1.1
2017-02-10 Modified reference design Colin Ming 1.2
6223A-SRD
FN-LINK TECHNOLOGY LIMITED 1Proprietary & Confidential Information
CONTENTS
1. Introduction..............................................................................................................................1
2. Features.................................................................................................................................... 2
3. General Specification............................................................................................................ 3
3.1 General Specification............................................................................................................................. 3
3.2 Recommended Operating Rating.........................................................................................................3
4. WiFi/BT RF Specification......................................................................................................4
4.1 2.4GHz RF Specification....................................................................................................................... 4
5. Power Consumption.............................................................................................................. 6
6. Pin Assignments.....................................................................................................................7
6.1 Pin Outline................................................................................................................................................7
6.2 Pin Definition............................................................................................................................................7
7. Dimensions.............................................................................................................................. 9
7.1 Physical Dimensions.............................................................................................................................. 9
7.2 Layout Recommendation.................................................................................................................... 10
8. Host Interface Timing Diagram.........................................................................................11
8.1 SDIO Pin Description............................................................................................................................11
8.2 SDIO Default Mode Timing Diagram................................................................................................. 11
8.3 SDIO High Speed Mode Timing Diagram.........................................................................................12
8.4 SDIO Bus Timing Specifications in SDR Modes............................................................................. 13
8.5 SDIO Bus Timing Specifications in DDR50 Mode...........................................................................14
9. Reference Design.................................................................................................................16
10. The Key Material List........................................................................................................ 17
11. Recommended Reflow Profile........................................................................................ 17
12. Package................................................................................................................................ 18
6223A-SRD
FN-LINK TECHNOLOGY LIMITED 1Proprietary & Confidential Information
1. Introduction
6223A-SRD is a small size and low profile of WiFi + BT Combo module with LGA (Land-Grid Array)
footprint, board size is 12mm*12mm with module thickness of 2mm. It can be easily manufactured on
SMT process and highly suitable for tablet PC, ultra book, mobile device and consumer products. It
provides SDIO interface for WiFi to connect with host processor and high speed UART interface for BT. It
also has a PCM interface for audio data transmission with direct link to external audio codec via BT
controller. The WiFi throughput can go up to 150Mbps in theory by using 1x1 802.11n b/g/n SISO
technology and Bluetooth can support BT2.1+EDR/BT3.0 and BT4.2.
6223A-SRD uses highly integrated WiFi/BT single chip based on advanced COMS process. 6223A-SRD
integrates whole WiFi/BT function blocks into a chip, such as SDIO/UART, MAC, BB, AFE, RFE, PA,
EEPROM and LDO/SWR, except fewer passive components remained on PCB.
This compact module is a total solution for a combination of Wi-Fi + BT technologies. The module is
specifically developed for Smart phones and Portable devices.
6223A-SRD
FN-LINK TECHNOLOGY LIMITED 2Proprietary & Confidential Information
2. Features
Operate at ISM frequency bands (2.4GHz)
SDIO for WiFi and UART for Bluetooth
IEEE standards support: IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11d, IEEE 802.11e,
IEEE 802.11h, IEEE 802.11i
Fully Qualified for Bluetooth 2.1+EDR specification including both 2Mbps and 3Mbps modulation
mode
Fully qualified for Bluetooth 3.0
Fully qualified for Bluetooth 4.2 Dual mode
Full–speed Bluetooth operation with Piconet and Scatternet support
Enterprise level security which can apply WPA/WPA2 certification for WiFi.
WiFi 1 transmitter and 1 receiver allow data rates supporting up to 150 Mbps downstream and 150
Mbps upstream PHY rates
6223A-SRD
FN-LINK TECHNOLOGY LIMITED 3Proprietary & Confidential Information
3. General Specification
3.1 General Specification
3.2 Recommended Operating Rating
Min. Typ. Max. Unit
Operating Temperature -20 25 70 deg.C
VCC33 3.15 3.3 3.45 V
VDDIO 1.7 1.8 or 3.3 3.45 V
Model Name 6223A-SRD
Product Description Support WiFi/Bluetooth functionalities
Dimension L x W x H: 12 x 12 x1.5 (typical) mm
WiFi Interface Support SDIO V3.0
BT Interface UART / PCM
Operating temperature -20°C to 70°C
Storage temperature -40°C to 85°C
6223A-SRD
FN-LINK TECHNOLOGY LIMITED 4Proprietary & Confidential Information
4. WiFi/BT RF Specification
4.1 2.4GHz RF Specification
Feature Description
Operating
Frequency
2.400～2.4835GHz
Standards WiFi:
IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11d,
IEEE 802.11e, IEEE 802.11h, IEEE 802.11i
BT:
V2.1+EDR/BT v3.0/BT v3.0+HS/BT v4.2
Modulation WiFi:
802.11b: CCK(11, 5.5Mbps), QPSK(2Mbps),
BPSK(1Mbps),
802.11 g/n: OFDM
BT:
8DPSK, π/4 DQPSK, GFSK
PHY Data rates WiFi:
802.11b: 11,5.5,2,1 Mbps
802.11g: 54,48,36,24,18,12,9,6 Mbps
802.11n: up to 150Mbps
BT:
1 Mbps for Basic Rate
2,3 Mbps for Enhanced Data Rate
EVM 802.11b /1Mbps : EVM≦-10dB
802.11b /11Mbps : EVM≦-10dB
802.11g /6Mbps : EVM≦-5dB
802.11g /54Mbps : EVM≦-25dB
802.11n /6.5Mbps : EVM≦-5dB
802.11n /65Mbps : EVM≦-28dB
802.11n /13.5Mbps : EVM≦-5dB
802.11n /135Mbps : EVM≦-28dB
6223A-SRD
FN-LINK TECHNOLOGY LIMITED 5Proprietary & Confidential Information
Receiver Sensitivity
(WiFi)
802.11b@8% PER
1Mbps ≦-91dBm
2Mbps≦-89dBm
5.5Mbps≦-87dBm
11Mbps ≦-85dBm Max input level≥-8
802.11g@10% PER
6Mbps ≦-87dBm
9Mbps ≦-86dBm
12Mbps≦-84dBm
18Mbps≦-82dBm
24Mbps≦-79dBm
36Mbps≦-75dBm
48Mbps ≦-71dBm
54Mbps ≦-70dBm Max input level≥-20
802.11n@10% PER
HT20_MCS 0 ≦-87dBm HT40_MCS 0≦-84
HT20_MCS 1≦-84dBm HT40_MCS 1≦-81
HT20_MCS 2 ≦-82dBm HT40_MCS 2≦-79
HT20_MCS 3 ≦-79dBm HT40_MCS 3≦-76
HT20_MCS 4 ≦-75dBm HT40_MCS 4≦-72
HT20_MCS 5 ≦-71dBm HT40_MCS 5≦-68
HT20_MCS 6 ≦-70dBm HT40_MCS 6≦-67
HT20_MCS 7 ≦-69dBm HT40_MCS 7≦-66
Max input level≥-20
Receiver Sensitivity
(BT)
-89dBm @ 1Mbps
-86dBm @ 2Mbps
-83dBm @ 3Mbps
Operating Channel WiFi 2.4GHz:
11: (Ch. 1-11) – United States
BT 2.4GHz: Ch. 0 ~78
Media Access
Control
WiFi: CSMA/CA with ACK
BT: AFH, Time Division
Antenna External Antenna
Network Architecture WiFi: Ad-hoc mode (Peer-to-Peer )
Infrastructure mode
6223A-SRD
FN-LINK TECHNOLOGY LIMITED 6Proprietary & Confidential Information
Software AP
WiFi Direct
BT: Pico Net, Scatter Net
Security WiFi: WPA, WPA-PSK, WPA2, WPA2-PSK, WEP 64bit & 128bit,
IEEE 802.11x, IEEE 802.11i
BT: Simple Paring
OS Supported Android /Linux/ Win CE /iOS /XP/WIN7
Host Interface WiFi: SDIO
BT: UART
Operating Voltage 3.3±10% Vdc I/O supply voltage
Dimension Typical L12.0*W12.0*H1.6mm
5. Power Consumption
Power Consumption
(Typical by using
SWR)
WiFi only:
TX Mode: (Throughput mode) 170mA (MCS7/BW40/13dBm)
RX Mode: (Throughput mode) 130mA (MCS7/BW40/-60dBm)
Associated Idle power saving with DTIM=3 2.1mA
Unassociated Idle: 0.1mA
RF disable Mode: 0.1mA
BT:
Inquiry & Page Scan: 0.9 mA
ACL no traffic: 7.5mA
SCO HV3: 15.0mA
6223A-SRD
FN-LINK TECHNOLOGY LIMITED 7Proprietary & Confidential Information
6. Pin Assignments
6.1 Pin Outline
< TOP VIEW >
6.2 Pin Definition
NO. Name Description
1 AGND Ground connections
2 WL_BT_ANT RF I/O port
3 AGND Ground connections
4 NC Floating (NC)
5 NC Floating (NC)
6 HOST_WAKE_BT Host to wake up Bluetooth device
7 BT_WAKE_HOST Bluetooth device to wake up host
8 NC Floating (NC)
9 VBAT_IN 3.3±10% V Main power voltage source input
6223A-SRD
FN-LINK TECHNOLOGY LIMITED 8Proprietary & Confidential Information
10 NC Floating (NC)
11 NC Floating (NC)
12 WL_DIS# Internal regulators power enable/disable
13 WL_HOST_WAKE WLAN to wake up HOST
14 SD_D2 SDIO data line 2
15 SD_D3 SDIO data line 3
16 SD_CMD SDIO command line
17 SD_CLK SDIO clock line
18 SD_D0 SDIO data line 0
19 SD_D1 SDIO data line 1
20 AGND Ground connections
21 NC Floating(NC)
22 VDDIO I/O Voltage supply input
23 NC Floating (NC)
24 SUSCLK_IN External Clock input(32.768kHz), need to be reserved
25 PCM_OUT PCM Output
26 PCM_CLK PCM Clock
27 PCM_IN PCM Input
28 PCM_SYNC PCM Sync
29 NC Floating (NC)
30 MAIN_XTAL_IN Floating (NC)
31 AGND Ground connections
32 NC Floating (NC)
33 AGND Ground connections
34 BT_DIS# BT Reset IN
35 VBAT_EN Floating (NC)
36 AGND Ground connections
37 NC Floating (NC)
38 NC Floating (NC)
39 NC Floating (NC)
40 NC Floating (NC)
41 UART_RTS UART RTS
42 UART_OUT UART Output
43 UART_IN UART Input
44 UART_CTS UART CTS
45 AGND Floating (NC)
6223A-SRD
FN-LINK TECHNOLOGY LIMITED 9Proprietary & Confidential Information
7. Dimensions
7.1 Physical Dimensions
<Bottom View>
6223A-SRD
FN-LINK TECHNOLOGY LIMITED 10 Proprietary & Confidential Information
7.2 Layout Recommendation
6223A-SRD
FN-LINK TECHNOLOGY LIMITED 11 Proprietary & Confidential Information
8. Host Interface Timing Diagram
8.1 SDIO Pin Description
The module supports SDIO version 3.0 for all 1.8V 4-bit UHSI speeds: SDR50(100 Mbps), and
DDR50(50MHz, dual rates) in addition to the 3.3V default speed(25MHz) and high speed (50 MHz). It has
the ability to stop the SDIO clock and map the interrupt signal into a GPIO pin. This ‘out-of-band’ interrupt
signal notifies the host when the WLAN device wants to turn on the SDIO interface. The ability to force
the control of the gated clocks from within the WLAN chip is also provided.
SDIO Pin Description
SD 4-Bit Mode
DATA0 Data Line 0
DATA1 Data Line 1 or Interrupt
DATA2 Data Line 2 or Read Wait
DATA3 Data Line 3
CLK Clock
CMD Command Line
8.2 SDIO Default Mode Timing Diagram
6223A-SRD
FN-LINK TECHNOLOGY LIMITED 12 Proprietary & Confidential Information
8.3 SDIO High Speed Mode Timing Diagram
6223A-SRD
FN-LINK TECHNOLOGY LIMITED 13 Proprietary & Confidential Information
8.4 SDIO Bus Timing Specifications in SDR Modes
Clock timing(SDR Modes)
6223A-SRD
FN-LINK TECHNOLOGY LIMITED 14 Proprietary & Confidential Information
Card Input timing (SDR Modes)
8.5 SDIO Bus Timing Specifications in DDR50 Mode
6223A-SRD
FN-LINK TECHNOLOGY LIMITED 15 Proprietary & Confidential Information
Data Timing
6223A-SRD
FN-LINK TECHNOLOGY LIMITED 16 Proprietary & Confidential Information
9. Reference Design
to pin9 of the module
to pin22 of the module
6223A-SRD
FN-LINK TECHNOLOGY LIMITED 17 Proprietary & Confidential Information
10. The Key Material List
主料 主 IC RTL8723DS_QFN48
主料 PCB F23DSSM23_20160513 12X12X0.6mm 四层板 板材 FR4（翔宇）
主料 SMD 晶振 2520 24MHz 12pF 10ppm (TST)
替代料 SMD 晶振 2520 24MHz 12pF 10ppm E2SB24E00000LE Hosonic（鸿星）
11. Recommended Reflow Profile
Referred to IPC/JEDEC standard.
Peak Temperature : <250°C
Number of Times : 2 times
6223A-SRD
FN-LINK TECHNOLOGY LIMITED 18 Proprietary & Confidential Information
12. Package
the take-up package
Using self-adhesive tape
Size of black tape: 24mm*32.6m the cover tape :2.13mm*32.6m
Color of plastic disc: blue
A roll of 2000pcs
NY bag size:460mm*385mm size ：350*350*35mm
6223A-SRD
FN-LINK TECHNOLOGY LIMITED 19 Proprietary & Confidential Information
The packing case size:350*210*370mm
FCC Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference. (2) This device must accept any
interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
---Reorient or relocate the receiving antenna.
---Increase the separation between the equipment and receiver.
---Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
---Consult the dealer or an experienced radio/TV technician for help.
WARNING: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
LABEL OF THE END PRODUCT:
The final end product must be labelled in a visible area with the following "Contains TX FCC ID:
2AATL-6223A-SRD". If the size of the end product is smaller than 8x10cm, then additional FCC
part 15.19 statement is required to be available in the users manual: This device complies with
Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
RF Exposure
This device has been evaluated and shown compliant with the FCC RF Exposure limits under
fixed exposure conditions (antennas are greater than 20cm from a person's body) when
installed in certain specific OEM configurations.
This modular complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter. Due to missing shielding the module is strictly limited to integration by
the Grantee himself or his dedicated OEM integrator under control of the Grantee. However,
the OEM integrator is still responsible for testing their end-product for any additional compliance
requirements required with this module installed.
FN-LINK TECHNOLOGY LIMITED 20 Proprietary & Confidential Information
IMPORTANT NOTE:
This module is intended for OEM integrator only and the OEM integrators and instructed to
ensure that the end user has no manual instructions to remove or install the device. The OEM
integrator is still responsible for the FCC compliance requirement of the end product, which
integrates this module.
Integration is typically strictly restricted to Grantee himself or dedicated OEM integrators under
control of the Grantee.
In the event that these conditions can not be met (for example certain laptop configurations or
co-location with another transmitter. then the FCC authorization is no longer considered valid
and the FCC ID can not be used on the final product. In these circumstances, the OEM
integrator will be responsible for re-evaluating the end product (including the transmitter) and
obtaining a separate FCC authorization.
The module will be responsible to satisfy SAR/RF Exposure requirements, when the module
integrated into any (portable, mobile, fixed) host device.
This module has been designed to operate with a PIFA antenna having a maximum gain of
2.99dBi. Only this type of antenna may be used, the manufacturer recommended antenna as
below:
No. Brand Model name Antenna
Type Connector Gain
(dBi)
1 ZHONGTIAN
XUN 2.00001213 PIFA I-PEX 2.99
2 XK
XKFPC-2D4-5D8-1
50 PIFA I-PEX 0.0
3 XK
XK-QX2400-PCB-1
40 PIFA I-PEX 2.0
4 ZHONGTIAN
XUN 2.00001050 PIFA I-PEX 0.38
The module must in the end-product be installed in such manner that the authorized antennas
can be used, any change of the antenna will void the certification.
EU Regulatory Conformance
Hereby, we(FN-LINK TECHNOLOGY LIMITED) declared that this device is in compliance with
the essential requirements and other relevant provisions of Directive 2014/53/EU
FN-LINK TECHNOLOGY LIMITED 21 Proprietary & Confidential Information

Navigation menu