Hallmark DKL1608 2.4G module User Manual Manual Statement Limited Module

Download:
Mirror Download [FCC.gov]
Document ID	3301003
Application ID	OTPUKDmWOplJwHQQ5JMU4w==
Document Description	User Manual Statement.pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	24.71kB (308934 bits)
Date Submitted	2017-03-01 00:00:00
Date Available	2017-03-01 00:00:00
Creation Date	2017-03-01 10:59:27
Producing Software	GPL Ghostscript 9.0
Document Lastmod	2017-03-01 10:59:27
Document Title	Manual Statement Limited Module
Document Creator	PDFCreator Version 1.1.0
Document Author:	keiyeung

WARNING! This module will only be market to specific OEM customer. They will install this module only in
their own end products and they will be made aware of the requirement that the modular only be installed in
the OEM only.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved
by the party responsible for compliance could void the user's authority to operate this
equipment.
The RF Module is labeled with its own FCC ID Number. If the FCC ID is not visible when
the module is installed inside another device, then the outside of the device into which
the module is installed must also display a label referring to the enclosed module. This
exterior label can use wording such as the following:
Contains Transmitter Module FCC ID: SQ9DKL1608
Application name: Hallmark Cards, Inc.
Contains Transmitter Module IC: 5768A-DKL1608
Model: DKL1608
Industry Canada
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject
to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne
doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
Under Industry Canada regulations, this radio transmitter may only operate using
an antenna of a type and maximum (or lesser) gain approved for the transmitter by
Industry Canada. To
reduce potential radio interference to other users, the antenna type and its gain
should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not
more than that necessary for successful communication.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio
peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur)
approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de
brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type
d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente
(p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication
satisfaisante.
The RF Module is labeled with its own IC Certification Number.
If the
certification number is not visible when the module is installed inside another
device, then the outside of the device into which the module is installed must
also display a label referring to the enclosed module. This exterior label can use
wording such as the following:

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 3
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : b2b22b2c-0086-11e7-0000-18e0771959df
Producer                        : GPL Ghostscript  9.0
Keywords                        : ()
Modify Date                     : 2017:03:01 10:59:27+08:00
Create Date                     : 2017:03:01 10:59:27+08:00
Creator Tool                    : PDFCreator Version 1.1.0
Document ID                     : b2b22b2c-0086-11e7-0000-18e0771959df
Format                          : application/pdf
Title                           : Manual Statement Limited Module
Creator                         : keiyeung
Description                     : ()
Author                          : keiyeung
Subject                         : 

EXIF Metadata provided by EXIF.tools