Hansol LCD B17BF-1 LCD Monitor User Manual 700T
Hansol LCD Inc. LCD Monitor 700T
Contents
- 1. users manual
- 2. usrs manual
users manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 266378 |
| Application ID | UeAwz3KNZfzbTQO9Y6s2WA== |
| Document Description | users manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 118.92kB (1486443 bits) |
| Date Submitted | 2002-08-28 00:00:00 |
| Date Available | 2002-08-27 00:00:00 |
| Creation Date | 2002-08-12 13:09:30 |
| Producing Software | Acrobat Distiller 4.0.5 for Macintosh |
| Document Lastmod | 2002-08-21 15:03:43 |
| Document Title | 700T ¿µ¾î |
| Document Creator | QuarkXPress: PSPrinter 8.2.1 |
| Document Author: | ÆÇ°Ç |
Table of Contents Parts Connection to Computer How to Adjust Monitor Angle Installing Monitor Driver Name and Function of Front Keys Power Management Feature 10 PC Menu 11 Video Menu 15 TV 18 SOUND Menu 21 Configuration OSD Menu 23 Picture In Pincture(PIP) function 26 Remote Controller 27 Standard Signal Table 28 Specification 29 Troubleshooting 30 Warning 32 Parts Good Posture Guide Parts Place the monitor to face the user and then adjust the monitor angle. Take a break (for about 10 minutes) at every hour during the work with monitor. Refer to the following figure to take the correct posture. about 50cm Look down the monitor below the horizon. Adjust the monitor to prevent reflection. LCD Monitor Relax shoulders and arms, and sit back on the chair. Adjust the monitor stand to acquire required angle. Maintain the arms horizontally and place hands softly on the keyboard. RCA Cable (Pair) Signal Cable Stereo Cable Antenna Cable S-VHS Cable AC Power Cable Keep feet flat on the ground. 12V-DC Adapter Remote Controller/Battery User's Manual / Warranty Card Installation Diskette Connection to Computer Basic Connection Port for 12V DC cable from DC adapter. Applied Connection 1. Connect the adapter to "12V DC" input terminal. 2. Connect the computer cable to PC1. 3. Connect video (V1) connection cable or SVHS (V2) connection cable to DVD, VCR or camcorder. 4. Connect audio output (computer, DVD, VCR or camcorder) to Audio In (L), Audio In (R) or Audio In (Stereo). 5. Connect headphone or earphone to H-Phone terminal. 6. Connect antenna or CATV connection cable to "Antenna" terminal. Port for Signal cable from Signal Source. General For Macintosh How to Adjust monitor Angle In Usinga dapter. Adapter for Macintosh (Optional) Refer to the table on the rear side of the optional Macintosh adapter and adjust DIP switch by the resolution of the monitor. 1. Use 220 V or 110 V. (Free Voltage) 2. Connect monitor and computer via Signal cable (See figure 3. Power on the monitor and computer. Installing Monitor Driver Run (Click) Install at CD-ROM driver and select the product model to set the optimum display in Window 95 or 98. Use the Driver CD provided. Download the latest driver from home page of Hansol Electronics Inc. (http://www.hansolel.co.kr). Click 'Advanced..'. Click 'Next>'. Click 'Monitor'. Automatic Installation 1. Insert the CD in the CD-ROM driver. 2. "Installation Manager" window appears. (Or, double-click Install.exe in the CD-ROM driver folder using search function.) 3. Click "Driver Installation" icon. 4. Select the model and click "OK". 5. Select inf file of the model in the Drivers folder in CD-ROM driver, and then click "OK" button. 6. Click "Exit" to close the installation. Click 'Display a list of all...'. Click 'Next>'. Click 'Have Disk..'. Manual Installation 1. Insert the CD in the CD-ROM driver. 2. Click 'My Computer' and follow the procedure below. Select the driver and click 'OK'. Click 'Next>'. Click 'Control Panel'. Click 'Display'. Click 'Settings'. Click 'Next>'. Click 'Finish'. 3. Select Exit if the monitor model is changed, and then reboot Windows. Name and Function of Front Keys Front panel Functions Power Switch Power switch is located in the lower center of the monitor stand. You can push the switch to turn on/off the power. Power Saving LED Dark : Power off Green : Normal mode Green blinking : Power Saving mode or check signal Cable mode. Signal Source LED Each of the five LEDs (from left; PC1, PC2, TV, V1 and V2) over the power switch indicates the source of the signal which the monitor displays. On Screen Display (OSD) Function Button OSD buttons on the front of the monitor perform the following functions. MUTE KEY VOL SOURCE KEY VOL AUTO/SELECT KEY CH CH MENU KEY POWER KEY KEY KEY KEY KEY MUTE : Cut off sound SOURCE : monitor displays source of the signal in order. VIDEO VIDEO V) (PC AUTO/SELECT : Press this button, when OSD is not displayed, to perform automatic setting. If you press this button when OSD is displayed, you can select icons. MENU : Press this button to display menus. if you press this button when OSD is displayed, You can switch display to the previous menu and exit menu. POWER : Power switch. CH : Press this button to select TV channel in TV mode when OSD is not displayed. Or press the button, when OSD is displayed, to move the cursor into the menus which you want. when OSD is not displayed, you can adjust brightness or contrast in PC/VIDEO mode. VOL : Press this button to adjust volume of audio when OSD is not displayed. By pressing this button when OSD is displayed, you can move cursor into the menus or change gate level. Power Management Feature PC MENU When not in use for a long period of time, the monitor automatically reduces its power consumption, meeting power saving standards of EPA and NUTEK. The monitor is equipped with a power saving circuit that conforms to the world-standard Display Power Manager Signalling (DPMS) mode of Video Electronics Standard Association (VESA). The power management feature requires that the video card of the computer should support DPMS function. Status LED Sign Brightness Move to Power Consumption Use Normal DPMS mode Move to to have the monitor darker, to brighter. Normal Power Green Blinking Contrast 5 W or Below Move to Move to No image is displayed with LED blinking. Monitor is in power saving mode. Use mouse or keyboard to release power saving mode. No image is displayed without LED on. Power cable plug must be pulled out. Check the power plugs on monitor and on the wall. Use or to adjust contrast. Horizontal Position Move to Use 10 or Move to to adjust display left or right. 11 Vertical Position Move to Use or Move to to adjust display upward or downward. Preset Color Move to "FULL,9300K,6500K" FULL : Red, Green, Blue full 9300K : Bluish white 6500K : Reddish white Clock Move to User Color Move to If Auto Adjustment function fails to remove video noise, or to remove vertical noise. Use (Adjusting phase is required after the adjustment of Pixel Frequency.) Color Move to 12 Move to Use Move to or to increase or decrease each color. Scaling Move to Move to Move to 13 Video Menu ZOOM Brightness Move to Move to Move to Sharpness/Phase Use Move to to have the monitor darker, to brighter. Contrast Move to Move to Move to Use Auto - config Move to or to adjust contrast. Horizontal Position Move to Move to In most cases,AUTO ADJUSTMENT adjusts display appropriately. Use PHASE or adjust PIXEL FREQ In accordance with graphic card to fine tune the display. 14 Move to Use or Move to to adjust display left or right. 15 Vertical Position Move to Use or Move to Sharpness Move to Move to to adjust display upward or downward. Hue/Saturation Move to Move to PIP Position Move to Use 16 or Move to to adjust PIP position. 17 TV Hue/Saturation Channel Move to Move to Use or Move to Move to to select channel. Auto Channel Search Brightness Move to Move to Move to Move to Channel is searched automatically and saved. Use to have the monitor darker, to brighter. Select Configuration Contrast Move to Move to Use 18 or to adjust contrast. Move to Move to When signal is weak or the channel is not used for broadcasting, it is available to add or delete the channel. 19 Broadcast type SOUND Menu Sound Control Move to Move to Move to Use or Move to VOL, BASS, TREBLE at to select cable/air. Caption Sound Balence Move to Move to Move to Move to PC, VIDEO, TV at Speaker Balence Move to 20 Move to 21 Configuration OSD Menu Mute OSD H-Position Move to Move to Move to Use or to Sound On/Off. Use or Config Control Move to to adjust OSDleft or right. OSD V-Position Move to Move to Use SAP Move to or Move to to adjust display upward or downward. OSD On Time Move to Move to 22 Move to Move to 23 OSD Overlay Move to Move to Language Move to Factory Reset Move to Move to Information Move to Move to Move to OSD Zoom Move to 24 Move to 25 Picture In Pincture(PIP) function Remote Controller PIP On/Off Move to Move to PIP Position Move to 26 Move to 27 Specification Standard Signal Table Model Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz) Clock Frequency (MHz) H700T (B17BF) Type Amorphous active matrix super TFT LCD Screen Size 43.2cm (Diagonal) Maximum Resolution 1280 X 1024@75 Hz Pixel Range 0.264 mm X 0.264 mm Maximum Colors 16.7 M VGA (720 X 400) 31.469 70.087 28.322 VGA (640 X 480) 31.469 59.940 25.175 VGA (640 X 480) 37.500 75.000 31.500 (640 X 480) 43.269 85.008 36.000 SVGA (800 X 600) 46.875 75.000 49.500 Contrast Rate 350 : 1 Visual Angle 75째 / 75째 / 65째 / 60째 (Left / Right / Up / Down) Response Speed 25 ms Brightness 250 cd/m2 VGA SVGA (800 X 600) 53.674 85.061 56.250 XGA (1024 X 768) 48.363 60.004 65.000 XGA (1024 X 768) 60.023 75.029 78.750 XGA (1024 X 768) 68.677 84.997 94.500 SXGA (1280 X 1024) 63.981 60.020 108.000 SXGA (1280 X 1024) 79.976 75.025 135.000 MAC (640 X 480) 35.000 66.667 30.240 MAC (832 X 624) 49.726 74.551 57.284 MAC (1152 X 870) 68.681 75.062 100.000 "Out of range" displayed on the screen. This message is displayed when the signal from video card exceeds the maximum frequency of the monitor. Readjust resolution and frequency in accordance with the monitor capacity. (Refer to Standard Signal Table) LCD Panel Synchro Horizontal Frequency nization Vertical Frequency Video Input Video Signal Front Part Analog RGB (0.714 Vpp) 50 W Under 5 W MUTE, SOURCE, AUTO/SELECT, MENU,CH, VOL SWITCH Power Adapter MultiMedia Input: 85/265V (50~60 Hz), Output: 12V, 5A, 60W TV NTSC Audio 3 Watt Speaker X 2 (Max.) Video CVBS, S-VHS Wall Mount VESA Standard Safety Standard Safety Standard EMI & EMI FCC Dimension Size and Weight 436 X 448 X 197 / 6.3 Kg Low Radiation 28 85 Hz (Min.) Synchronous Signal Mode H, V Separate TTL Sync, Maximum Power Consumption Power Saving Mode Control key 80 kHz (Max.) UL MPR-II 29 Troubleshooting Double images or 'ghosts'. Power LED is off. No picture. Check the power connection. (Refer to page 4) Picture is dark. Message, "Message." is displayed on the screen. Check if computer power is on. Message, "No cable." is displayed on the screen. Check the computer connection cable. (Refer to page 4) Screen looks to be run down. Screen is not clear. Check the signal cable between monitor and computer. (Refer to page 4) Perform AUTO ADJUSTMENT. Perform FREQUENCY ADJUSTMENT and Adjust PHASE. Switch off/on the monitor. Remove accessories (Video extension cable and others) and switch on. Picture is biased or cut or too wide. Power LED turns into amber or blinking amber. No sound. Dead sound. Display is unstable and trembling. Check the resolution and frequency of computer and video card, and set up the again in reference to the current monitor mode and standard signal mode table. TV signal is not received. Color is irregular. 30 Check the resolution and frequency of computer and video card, and set up a gain in reference to the current monitor mode and standard signal mode table. Adjust COLOR at User Mode in OSD Color Menu. Adjust COLOR at User Mode in OSD Color Menu. Perform OSD ADJUSTMENT. Perform AUTO ADJUSTMENT. Monitor is in power saving mode. Check the voice signal connection code or adjust volume. Adjust BASS and TREBLE. Check if the selected channel mode is in accordance with the channel mode of the area. Select AUTO SEARCH to set up the channel automatically. 31 Warning Memo To prevent damage or loss, please read this warning carefully. When connecting/disconnecting the plug, pull out the plug itself, and never pull the plug to prevent fire caused by short. To prevent electric shock, do not connect/disconnect the plug with wet hand. If you see smoke or smell something burning, stop using the unit, switch off the power, pull out the plug, and then contact your local service station. To prevent fire, do not connect a large number of equipment in a single line. To prevent fire and electric shock, pull out the plug in case of thunder and lightening. To prevent fire and electric shock, do not try to take the monitor apart or repair it yourself. Contact your local service station or customer service center for inspection, modification or repair. 32 33
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Create Date : 2002:08:12 13:09:30 Producer : Acrobat Distiller 4.0.5 for Macintosh Author : ÆÇ°Ç Creator : QuarkXPress: PSPrinter 8.2.1 Title : 700T ¿µ¾î Modify Date : 2002:08:21 15:03:43+09:00 Page Count : 18EXIF Metadata provided by EXIF.tools