Harbor Freight 98239 Users Manual
98239 to the manual 40a11a52-9914-4b48-97a6-1b95968d5fc0
2015-01-25
: Harbor-Freight Harbor-Freight-98239-Users-Manual-209453 harbor-freight-98239-users-manual-209453 harbor-freight pdf
Open the PDF directly: View PDF 
.
Page Count: 5
DUAL HITCH EXTENSION
Model
98239
SET UP AND OPERATING INSTRUCTIONS
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
Distributed exclusively by Harbor Freight Tools®.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright© 2008 by Harbor Freight Tools®. All rights reserved. No portion of
this manual or any artwork contained herein may be reproduced in any shape
or form without the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
Page 2SKU 98239 For technical questions, please call 1-800-444-3353.
SAVE THIS MANUAL
Keep this manual for the safety
warnings and precautions, assembly,
operating, inspection, maintenance and
cleaning procedures. Write the product’s
serial number in the back of the manual
near the assembly diagram (or month and
year of purchase if product has no num-
ber). Keep this manual and the receipt in
a safe and dry place for future reference.
IMPORTANT SAFETY
INFORMATION
In this manual, on the labeling,
and all other information
provided with this product:
This is the safety alert
symbol. It is used to alert
you to potential personal
injury hazards. Obey all
safety messages that
follow this symbol to avoid
possible injury or death.
DANGER indicates
a hazardous
situation which, if not
avoided, will result in death or
serious injury.
WARNING indicates
a hazardous
situation which, if not
avoided, could result in death
or serious injury.
CAUTION, used
with the safety alert
symbol, indicates a
hazardous situation which, if
not avoided, could result in
minor or moderate injury.
NOTICE is used to
address practices
not related to personal injury.
CAUTION, without
the safety alert
symbol, is used to address
practices not related to
personal injury.
GENERAL AND SPECIFIC
SAFETY RULES
WARNING! Read all
instructions. Failure to follow all
instructions listed below may
result in serious injury.
SAVE THESE INSTRUCTIONS
WARNING: To prevent serious 1.
injury and/or property damage:
DO NOT USE AUXILIARY a.
COLLAR-LESS RECEIVER FOR
TOWING.
Inspect before use; do not use b.
if Dual Hitch Extension is bent,
cracked, or damaged in any way.
Do not exceed 400 pound total c.
tongue weight (for auxiliary and
towing receivers combined), 4,000
pound gross trailer weight, or ve-
hicle receiver capacity.
Be aware of dynamic loading! d.
Suddenly starting or jerking against
load may briey create excess load
causing product failure.
Wear ANSI-approved safety e.
goggles and heavy-duty work
gloves during installation, setup and
removal of Dual Hitch Extension.
Install and use according to DOT f.
regulations.
Read this manual before use.g.
Page 3SKU 98239 For technical questions, please call 1-800-444-3353.
Work area safety2.
Keep work area clean and well a.
lit. Cluttered or dark areas invite
accidents.
Keep children and bystanders b.
away while operating. Distrac-
tions can cause accidents.
Personal safety3.
Stay alert, watch what you are do-a.
ing and use common sense when
operating. Do not use while you
are tired or under the inuence of
drugs, alcohol or medication. A
moment of inattention may result in
serious personal injury.
Use safety equipment. Always b.
wear eye protection. Safety
equipment such as dust mask,
non-skid safety shoes, hard
hat, or hearing protection used
for appropriate conditions will
reduce personal injuries.
Dress properly. Do not wear loose c.
clothing or jewelry. Keep your hair,
clothing and gloves away from mov-
ing parts. Loose clothes, jewelry or
long hair can be caught in moving
parts.
Product safety4.
Maintain labels and nameplates a.
on the tool. These carry important
safety information. If unreadable
or missing, contact Harbor Freight
Tools for a replacement.
This product is heavy, and is not a b.
toy. Keep it out of reach of children.
The warnings, precautions, and instruc-
tions discussed in this instruction
manual cannot cover all possible con-
ditions and situations that may occur.
It must be understood by the operator
that common sense and caution are
factors which cannot be built into this
product, but must be supplied by the
operator.
SAVE THESE INSTRUCTIONS.
SPECIFICATIONS
Maximum Gross
Towing Weight 4,000 lb.
Maximum Tongue
Weight (For auxiliary
and towing receivers
combined)
400 lb.
Towing Receiver
Specications 2” Receiver, 2” x 6-1/2”
Auxiliary Receiver 2” x 7-1/2”
UNPACKING
When unpacking, check to make
sure that the item is intact and undam-
aged. If damage is found, please call
Harbor Freight Tools at the number shown
on the cover of this manual as soon as
possible.
INITIAL SET UP INSTRUCTIONS
Read the ENTIRE
IMPORTANT SAFETY
INFORMATION section at the
beginning of this manual
including all text under
subheadings therein before set
up or use of this product.
ASSEMBLY
There is no assembly required for this
Dual Hitch Extension.
Page 4SKU 98239 For technical questions, please call 1-800-444-3353.
OPERATING INSTRUCTIONS
This Dual Hitch Extension allows you 1.
to tow a trailer, boat, or camper and
still have a hitch receiver available for
a bike rack or other auxiliary acces-
sory that needs a hitch receiver.
Be sure vehicle is parked on a level, 2.
at surface.
Slide the bottom half of the Dual 3.
Hitch Extension into the vehicle tow
hitch receiver opening. Secure the
Dual Hitch Extension using a safety
pin (not included) and R-Clip (not
included). See Figure 1.
Slide a ball hitch (not included) into 4.
the bottom square of the Dual Hitch
Extension. Secure the ball hitch with
a safety pin and R-Clip.
Slide the auxiliary accessory into the 5.
top square hole of the Dual Hitch
Extension and secure with a safety
pin and an R-Clip.
NOTE: It is always recommended 6.
and safer to attach your auxiliary
accessory to the Dual Hitch Exten-
sion after hooking up a trailer,
boat, or camper. When nished,
unhitch the auxiliary accessory
before unhitching the Trailer, boat,
or camper.
WARNING: When traveling, check 7.
all connections, hitches and loads
often. Check for loose or missing
safety pins, R-Clips, safety chains
and in general all parts of towing
apparatus you may be using.
When you are nished using the Dual 8.
Hitch Extension, always remove it
from the tow vehicle. Never leave
it attached as it adds to the overall
length of your vehicle and could
cause an accident when backing, or
by tripping when walking behind your
vehicle.
Wipe off the Dual Hitch Extension 9.
and store it inside, out of the reach of
children.
USER-MAINTENANCE
INSTRUCTIONS
Procedures not
specically explained in this
manual must be performed only
by a qualied technician.
TO PREVENT
SERIOUS INJURY
FROM FAILURE:
Do not use this Dual Hitch
Extension if it is cracked, or
damaged in any way.
Cleaning, Maintenance, and
Lubrication
BEFORE EACH USE,1. inspect the
general condition of this Dual Hitch
Extension. Check for cracks or any
condition that may affect its safe
operation.
AFTER USE,2. wipe with clean cloth.
Page 5SKU 98239 For technical questions, please call 1-800-444-3353.
PLEASE READ THE
FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DIS-
TRIBUTOR HAS PROVIDED THE PARTS
LIST AND ASSEMBLY DIAGRAM IN
THIS MANUAL AS A REFERENCE TOOL
ONLY. NEITHER THE MANUFACTURER
OR DISTRIBUTOR MAKES ANY REP-
RESENTATION OR WARRANTY OF ANY
KIND TO THE BUYER THAT HE OR SHE
IS QUALIFIED TO MAKE ANY REPAIRS
TO THE PRODUCT, OR THAT HE OR
SHE IS QUALIFIED TO REPLACE ANY
PARTS OF THE PRODUCT. IN FACT,
THE MANUFACTURER AND/OR DIS-
TRIBUTOR EXPRESSLY STATES THAT
ALL REPAIRS AND PARTS REPLACE-
MENTS SHOULD BE UNDERTAKEN BY
CERTIFIED AND LICENSED TECHNI-
CIANS, AND NOT BY THE BUYER. THE
BUYER ASSUMES ALL RISK AND LI-
ABILITY ARISING OUT OF HIS OR HER
REPAIRS TO THE ORIGINAL PRODUCT
OR REPLACEMENT PARTS THERETO,
OR ARISING OUT OF HIS OR HER IN-
STALLATION OF REPLACEMENT PARTS
THERETO.
LIMITED 90 DAY WARRANTY
Harbor Freight Tools Co. makes
every effort to assure that its products meet
high quality and durability standards, and
warrants to the original purchaser that this
product is free from defects in materials
and workmanship for the period of 90 days
from the date of purchase. This warranty
does not apply to damage due directly or
indirectly, to misuse, abuse, negligence or
accidents, repairs or alterations outside our
facilities, criminal activity, improper instal-
lation, normal wear and tear, or to lack of
maintenance. We shall in no event be liable
for death, injuries to persons or property, or
for incidental, contingent, special or con-
sequential damages arising from the use
of our product. Some states do not allow
the exclusion or limitation of incidental or
consequential damages, so the above limita-
tion of exclusion may not apply to you. THIS
WARRANTY IS EXPRESSLY IN LIEU OF
ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS. To
take advantage of this warranty, the product
or part must be returned to us with transpor-
tation charges prepaid. Proof of purchase
date and an explanation of the complaint
must accompany the merchandise. If our
inspection veries the defect, we will either
repair or replace the product at our election
or we may elect to refund the purchase price
if we cannot readily and quickly provide you
with a replacement. We will return repaired
products at our expense, but if we determine
there is no defect, or that the defect resulted
from causes not within the scope of our war-
ranty, then you must bear the cost of return-
ing the product.
This warranty gives you specic legal
rights and you may also have other rights
which vary from state to state.
3491 Mission Oaks Blvd. • PO Box 6009
• Camarillo, CA 93011 • (800) 444-3353
Record Product’s Serial Number Here:
Note: If product has no serial number,
record month and year of purchase
instead.
Note: Some parts are listed and shown
for illustration purposes only, and are
not available individually as replace-
ment parts.
