Harman INFIMS Infinity IMS Car Audio system User Manual

Harman International Industries, Inc Infinity IMS Car Audio system Print

a href="https://usermanual.wiki/Harman" itemprop="url"> Harman >

Contents

User manual

IMSInput Management Systemkappa seriesinstructionsRVol+-Select
2INTRODUCTIONTHANK YOUfor purchasing the Infinity®IMS Input Management System. So that we maybetter serve you should your new product require service, please retain your original purchase receipt and read the enclosed warranty registration card.BOX CONTENTSYour IMS box should contain all the items shown in Figure 1:WARNING! Playing loud music in an automobile can hinder your ability to hear traffic and permanently damage your hearing. We recommend listening at low or moderate levels while driving your car. Infinity accepts no responsibility for hearing loss, bodily injuryor property damage resulting from the use or misuse of this product.INSTALLATIONIMPORTANTTo get the most out of your IMS’ features, we strongly recommend that installation beentrusted to a qualified professional. Although these instructions explain how to install, connect and set-up the IMS, they cannot show all of the different possible systems that canbe assembled using the IMS. Please ask your authorized Infinity car audio dealer about professional installation.INSTALLATION WARNINGS AND TIPS• Always use protective eyewear when using tools• Turn OFF the vehicle’s audio system and other electrical devices before beginning installa-tion. disconnect the (–) negative lead from the vehicle’s battery.• Check clearances on both sides of any planned mounting surface before drilling any holesor installing any screws. Remember that the screws can extend behind the mounting surface.• At the installation locations, locate and make a note of all fuel lines, hydraulic brake lines,vacuum lines and electrical wiring. Use extreme caution when cutting or drilling in andaround these areas.• Before drilling or cutting holes, use a utility knife to remove unwanted fabric or vinyl to keepmaterial from snagging in the drill bit.• To minimize noise, when routing cables, keep input-signal cables away from power cablesand speaker wires.• When making connections, make certain they are secure and properly insulated.• If the IMS’ fuse must be replaced, use only the same type and rating as the original. Do notsubstitute another kind.INSTALLING THE CONTROL HEADWe recommend finding a location for the Control Head first, and then finding a location for the Junction Box that is within the length of the Control Head’s integral 4m cable.IMPORTANT INSTALLATION WARNINGS:• Do not install the Control Head where it may obstruct your view through thewindshield, or of your vehicle’s indicator displays.• Do not install the Control Head where it may hinder the function of safetydevices such as an airbag. Doing so may prevent the airbag from functioning properly in the event of an accident.• Mount the Control Head in a location that is easily accessible. instructionsIMSInput Management Systemreference seriesRVol+-SelectJunction BoxHands-FreeMicrophoneFlush-MountRingWiringHarnessAdhesiveStripBag withInstallation Screws**Contents4 x #8 x 1” Screws for Junction Box2 x #6 Screws for Control Head2 x 3mm Machine Screws for U-Bracket Instruction Manual, Quick-Start Guideand Warranty CardVelcro®StripU-Bracket Hands-FreeMicrophoneSurface-MountHolderControl HeadFIGURE 1: BOX CONTENTS
Download:
Mirror Download [FCC.gov]
Document ID1083888
Application IDItQGBPpF/WqF/xZARjvTzw==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize89.27kB (1115899 bits)
Date Submitted2009-03-23 00:00:00
Date Available2009-03-23 00:00:00
Creation Date2008-12-09 11:24:28
Producing SoftwareAcrobat Distiller 9.0.0 (Windows)
Document Lastmod2009-02-04 09:42:13
Document TitlePrint
Document CreatorAdobe Illustrator CS3
Document Author: Hyam
FCC ID Filing: APIINFIMS

Navigation menu