Healcerion SWM500 Wifi Module User Manual

Healcerion Co.,Ltd Wifi Module Users Manual

Contents

Users Manual

Download: Healcerion SWM500 Wifi Module User Manual
Mirror Download [FCC.gov]Healcerion SWM500 Wifi Module User Manual
Document ID3714546
Application IDqsvV7EBpuzjzmj3XHaZd6g==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeYes
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize51.49kB (643668 bits)
Date Submitted2018-01-15 00:00:00
Date Available2018-07-15 00:00:00
Creation Date2018-01-12 13:56:13
Producing SoftwareAcrobat Distiller 10.1.9 (Windows)
Document Lastmod2018-01-12 13:56:13
Document TitleMicrosoft Word - 02 FCC SWM-500 Manual_Ver0.91_ENG_20151202@mia171208_2
Document CreatorPScript5.dll Version 5.2.2
Document Author: BDC5BDC2BFEB

Manual for SWM-500 Wi-Fi module
1. Introduction
SWM-500 is a Wi-Fi module compliant with 802.11 n MAC/baseband/radio optimized for low-power
applications. The core chipset is from Taiyo-Yuden, part number WYSBMVGX4 and Antenna is
EDWLFPC_2P5P001 WI-FI DUAL BAND ANTENNA made by EDWORKS.
2. Hardware Architecture:
2.1 Main Module / Chipset Information
 Main Module : WYSBMVGX4, Taiyo-Yuden, IEEE802.11 n Wireless LAN Module
 Core Chipset : 88W8787, Marvell , WLAN/FM Single-Chip SoC
 Antenna : EDWLFPC_2P5P001, EDWORKS , WI-FI DUAL BAND ANTENNA
FXP831.07.0100C, taoglas, Freedom 2.4/4.9-6GHz Ground Coupled Antenna
2.2 Circuit Block Diagram
The major internal and external block diagram of SWM-500 is illustrated in Figure 1.
Figure 1. SWM-500 block diagram and System Interface
Version 0.91
Healcerion Co., Ltd
page 1 of 12
3. Notice
FCC Statement
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other
channels is not possible.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or
transmitter.
USERS MANUAL OF THE END PRODUCT:
The end user has to be informed that the FCC radio-frequency exposure guidelines for an uncontrolled
environment can be satisfied. The devices must be installed and used in strict accordance with the
manufacturer's instructions as described in the user documentation that comes with the product. The end
user has to also be informed that any changes or modifications not expressly approved by the
manufacturer could void the user's authority to operate this equipment. If the device is small or for such use
that it is not practicable to place the statement on the product, then additional FCC part 15.19 statement is
required to be available in the users manual: This device complies with Part 15 of FCC rules. Operation is
subject to the following two conditions: (1) this device may not cause harmful interference and (2) this
device must accept any interference received, including interference that may cause undesired operation.
LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains FCC ID:
2ADXVSWM500 ".
If the size of the end product is larger than 8x10cm, then the following FCC part 15.19 statement has to
also be available on the label: This device complies with Part 15 of FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Version 0.91
Healcerion Co., Ltd
page 2 of 12
4. Installation
This SWM-500 module must be installed in a device and not allow the user to replace nor modify it. The final
end product must be labeled in a visible area with the following " Contains FCC ID: 2ADXVSWM500".
It is suggested that module is placed in the following areas of the user's board as far as possible, to reduce
the influence of the antenna and wireless signal.
and at the same time, please consult someone technical support staff to assist the placement of modules and
related areas of layout design
Note : Please note that the SWM-500 is supplied without any shield casing, all the components are exposed.
Therefore, must be taken for ESD (electrostatic discharge), electromagnetic environment
Version 0.91
Healcerion Co., Ltd
page 3 of 12
4.1 PIN Description
Version 0.91
Healcerion Co., Ltd
page 4 of 12
5. Antenna Description

Part Nomber : EDWLFPC_2P5P001
FXP831.07.0100C (exclude explanation)
 Overview The EDWLFPC_2P5P001 Antenna works on WI-FI DUAL BAND ANTENNA. This
antenna has been designed with a specific solution to cover the current market applications that
require rectangular form-factor, with easy installation through a cable connection.
 Feature
 WiFi Dual Band Antenna
 IPEX MHFI Connector (U.FL compatible)
 68 mm Cable
 47*7*0.1 mm
 Characteristics
Frequency Band
Nominal Impedance
- R = 50Ω
Directive ness
Omni-directional
Free Space Gain
Version 0.91
Healcerion Co., Ltd
page 5 of 12

Mechanical
Version 0.91
Healcerion Co., Ltd
page 6 of 12
Version 0.91
Healcerion Co., Ltd
page 7 of 12

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : 
Create Date                     : 2018:01:12 13:56:13+09:00
Modify Date                     : 2018:01:12 13:56:13+09:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Creator                         : 
Title                           : Microsoft Word - 02 FCC SWM-500 Manual_Ver0.91_ENG_20151202@mia171208_2
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 10.1.9 (Windows)
Document ID                     : uuid:3998ea79-63cc-4613-aa0e-266616e9bace
Instance ID                     : uuid:ee4719b0-58b8-4790-a948-6d3fe9f7df0c
Page Count                      : 7
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2ADXVSWM500

Navigation menu