Hewlett Packard Enterprise APIN0103 Wireless Access Point User Manual AP 103 IG Rev 03

Download:
Mirror Download [FCC.gov]
Document ID	2195612
Application ID	G+NHgiBqRlkusWm+XF+XYQ==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	61.19kB (764933 bits)
Date Submitted	2014-02-20 00:00:00
Date Available	2014-03-05 00:00:00
Creation Date	2013-01-10 15:04:05
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2014-02-13 13:19:25
Document Title	AP-103 IG Rev 03.fm
Document Creator	FrameMaker 10.0.2
Document Author:	lxu

AP-103 Wireless Access Point
Installation Guide
The Aruba AP-103 wireless access point supports the IEEE 802.11n standard for
high-performance WLAN. This access point uses MIMO (Multiple-in, Multipleout) technology and other high-throughput mode techniques to deliver highperformance, 802.11n 2.4 GHz or 5 GHz functionality while simultaneously
supporting existing 802.11a/b/g wireless services. The AP-103 access point works
only in conjunction with an Aruba Controller.
Before You Begin
Figure 2 AP-103 Rear
Ethernet Port
Console Port
DC Power Socket
Kensington Lock
FCC Statement: Improper termination of access points installed in the
United States configured to non-US model controllers will be in violation of
the FCC grant of equipment authorization. Any such willful or intentional
violation may result in a requirement by the FCC for immediate termination
of operation and may be subject to forfeiture (47 CFR 1.80).
The Aruba AP-103 access point provides the following capabilities:






Wireless transceiver
Protocol-independent networking functionality
IEEE 802.11a/b/g/n operation as a wireless access point
IEEE 802.11a/b/g/n operation as a wireless air monitor
Compatibility with IEEE 802.3af PoE
Central management configuration and upgrades through a controller
EU Statement:
Lower power radio LAN product operating in 2.4 GHz and 5 GHz bands.
Please refer to the ArubaOS User Guide for details on restrictions.
Reset
Button
Produit rĂŠseau local radio basse puissance operant dans la bande
frĂŠquence 2.4 GHz et 5 GHz. Merci de vous referrer au ArubaOS User
Guide pour les details des restrictions.
The AP-103 requires ArubaOS 6.4.1.0 or later.
Low Power FunkLAN Produkt, das im 2.4 GHz und im 5 GHz Band arbeitet.
Weitere Informationen bezlßglich Einschränkungen finden Sie im ArubaOS
User Guide.
Package Contents

Apparati Radio LAN a bassa Potenza, operanti a 2.4 GHz e 5 GHz. Fare
riferimento alla ArubaOS User Guide per avere informazioni detagliate sulle
restrizioni.
AP-103 access point

9/16" and 15/16” Ceiling Rail Adapters

Installation guide (this document)
Pre-Installation Network Requirements
After WLAN planning is complete and the appropriate products and their
placement have been determined, the Aruba controller(s) must be installed and
initial setup performed before the Aruba APs are deployed.
Console Port
AP-103 Hardware Overview
Figure 1 AP-103 LEDs
The serial console port allows you to connect the AP to a serial terminal or a
laptop for direct local management. This port is a 4-pin connector covered by a
dust cover.
ENET 5Ghz 2.4 Gh z
LEDs



AP-103 is equipped with one 10/100/1000Base-T (RJ-45) auto-sensing, MDI/MDX
wired-network connectivity port. This port supports IEEE 802.3af Power over
Ethernet (PoE) compliance, accepting 48 VDC (nominal) as a standard defined
Powered Device (PD) from a Power Sourcing Equipment (PSE) such as a PoE
midspan injector, or network infrastructure that supports PoE.

The 10/100/1000 Mbps Ethernet port is on the back of the AP. The port has RJ-45
female connectors with the pin-outs shown in Figure 3.

1000Base-T Gigabit
Ethernet Port
PWR: Indicates whether or not the AP-103 is powered-on
ENET: Indicates the status of the AP-103’ Ethernet port
5 GHz: Indicates the status of the 802.11a/n radio
2.4 GHz: Indicates the status of the 802.11b/g/n radio
RJ-45 Female
Pin-Out
Signal Name
Function
BI_DA+
BI_DABI_DB+
BI_DC+
BI_DCBI_DBBI_DD+
BI_DD-
Bi-directional pair +A
Bi-directional pair -A
Bi-directional pair +B
Bi-directional pair +C
Bi-directional pair -C
Bi-directional pair -B
Bi-directional pair +D
Bi-directional pair -D
Table 1 AP-103 LED Meanings
LED
Color/State
Meaning
PWR
Off
No power to AP, or initial power-up
ENET
Identifying Known RF Absorbers/Reflectors/Interference
Sources
Identifying known RF absorbers, reflectors, and interference sources while in
the field during the installation phase is critical. Make sure that these sources are
taken into consideration when you attach an AP to its fixed location. Examples
of sources that degrade RF performance include:


CAT5e or better UTP cable of required length
One of the following power sources:
 802.3af-compliant Power over Ethernet (PoE) source. The POE source
can be any power source equipment (PSE) controller or midspan PSE
device
 Aruba AP AC-DC adapter kit (sold separately)
Aruba Controller provisioned on the network:
 Layer 2/3 network connectivity to your access point
 One of the following network services:

Aruba Discovery Protocol (ADP)

DNS server with an “A” record

DHCP Server with vendor-specific options
4. Verify post-installation connectivity.
AP booting
Green - Steady
AP ready

Off
Ethernet link unavailable
Yellow - Steady
10/100Mbps Ethernet link established
Reset Button
Green - Steady
1000Mbps Ethernet link established
Flashing
Ethernet link activity
The reset button can be used to return the AP to factory default settings. To reset
the AP:
Off
5 GHz radio disabled

Using the Ceiling Rail Adapter
The AP-103 ships with two ceiling rail adapters for 9/16” and 15/16” ceiling rails.
Additional wall mount adapters and ceiling rail adapters for other rail styles are
available as accessory kits.
Make sure the AP fits securely on the ceiling tile rail when hanging
the device from the ceiling, because poor installation could cause it
to fall onto people or equipment.
1. Pull the necessary cables through a prepared hole in the ceiling tile near
where the AP will be placed.
2. Place the adapter against the back of the AP with the adapter at an angle of
approximately 30 degrees to the tabs (see Figure 4).
Figure 4 Attaching the Ceiling Rail Adapter
2. Identify the specific installation location for each AP.
Green - Flashing
Service to all Aruba Networks products should be performed by trained
service personnel only.
Successful setup of an AP-103 consists of five tasks, which must be performed in
this order:
If PoE is not available, an optional Aruba AP AC-DC adapter kit (sold separately)
can be used to power the AP-103.
Error condition
Installing the AP
3. Twist the adapter clockwise until it snaps into place in the tabs (see Figure
4).
1. Verify pre-installation connectivity.
Red

Summary of the Setup Process
DC Power Socket
Additionally, a locally-sourced AC-to-DC adapter (or any DC source) can be used
to power this device, as long as it complies with all applicable local regulatory
requirements and the DC interface meets the following specifications:

Cement and brick
Objects that contain water
Metal
Microwave ovens
Wireless phones and headsets
AP Pre-Installation Checklist
Figure 3 Gigabit Ethernet Port Pin-Out
The AP-103 is equipped with four LEDs that indicate the status of the various
components of the AP.

You can mount the AP-103 access point on a wall or on the ceiling. Use the AP
placement map generated by Aruba’s Airwave VisualRF Plan software
application to determine the proper installation location(s). Each location
should be as close as possible to the center of the intended coverage area and
should be free from obstructions or obvious sources of interference. These RF
absorbers/reflectors/interference sources will impact RF propagation and
should have been accounted for during the planning phase and adjusted for in
VisualRF plan.
For initial setup of the controller, refer to the ArubaOS Quick Start Guide for
the software version installed on your controller.
Before installing your AP, ensure that you have the following:
Ethernet Port

Identifying Specific Installation Locations

Inform your supplier if there are any incorrect, missing, or damaged parts. If
possible, retain the carton, including the original packing materials. Use
these materials to repack and return the unit to the supplier if needed.
PW R
Refer to the ArubaOS Quick Start Guide for instructions on locating and
connecting to the controller.
3. Install each AP.
5. Configure each AP.
12 VDC (+/- 5%)/18W
Center-positive 1.7/4.0 mm circular plug, 9.5 mm length
Aruba Networks, Inc., in compliance with governmental requirements, has
designed the AP-103 access points so that only authorized network
administrators can change the settings. For more information about AP
configuration, refer to the ArubaOS Quick Start Guide and ArubaOS User
Guide.
1. Power off the AP.
5 GHz
Yellow - Steady
5 Ghz radio enabled in non-HT WLAN mode
Green - Steady
5 Ghz radio enabled in HT WLAN mode
Flashing - Green
5 Ghz Air or Spectrum Monitor
Off
2.4 GHz radio disabled
2. Press and hold the reset button using a small, narrow object, such as a
paperclip.
3. Power-on the AP without releasing the reset button. The power LED will
flash within 5 seconds.
4. Release the reset button.
2.4 GHz
Yellow - Steady
2.4 Ghz radio enabled in non-HT WLAN
mode
Green - Steady
2.4 Ghz radio enabled in HT WLAN mode
Flashing - Green
2.4 Ghz Air or Spectrum Monitor
The power LED will flash again within 15 seconds indicating that the reset is
completed. The AP will now continue to boot with the factory default settings.
Access points are radio transmission devices and as such are subject to
governmental regulation. Network administrators responsible for the
configuration and operation of access points must comply with local
broadcast regulations. Specifically, access points must use channel
assignments appropriate to the location in which the access point will be
used.
4. If necessary, connect the console cable to the console port on the back of the
AP.
5. Hold the AP next to the ceiling tile rail with the ceiling tile rail mounting slots
at approximately a 30-degree angle to the ceiling tile rail (see Figure 5). Make
sure that any cable slack is above the ceiling tile.
6. Pushing toward the ceiling tile, rotate the AP clockwise until the device
clicks into place on the ceiling tile rail.
Verifying Pre-Installation Connectivity
Before you install APs in a network environment, make sure that the APs are
able to locate and connect to the controller after power on.
Specifically, you must verify the following conditions:


When connected to the network, each AP is assigned a valid IP address
APs are able to locate the controller
Figure 5 Mounting the AP
China RoHS
Canadian Statement
Aruba products also comply with China environmental declaration requirements
and are labeled with the “EFUP 25” label shown at the left.
᳝↦᳝ᆇ⠽䋼ໄᯢ
Hazardous Materials Declaration
䚼ӊৡ⿄
(Parts)
⬉䏃ᵓ
(PCA Boards)
ᴎẄ㒘ӊ
(Mechanical Sub-Assemblies)
ƻ˖
᳝↦᳝ᆇ⠽䋼៪‫ܗ‬㋴(Hazardous Substance)
䬝
݁Ӌ䫀
໮⒈㘨㣃
&G
&U
3%%
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a
type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce
potential radio interference to other users, the antenna type and its gain should be so chosen that the
equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful
communication.
This device complies with Industry Canada licence-exempt RSS standard(s).
䪙
3E
∲
+J
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
Ćť
໮⒈Ѡ㣃䝮
3%'(
Operation is subject to the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.
AP-103 Wireless Access
Point
㸼⼎䆹᳝↦᳝ᆇ⠽䋼೼䆹䚼ӊ᠔᳝ഛ䋼ᴤ᭭Ёⱘ৿䞣ഛ೼ SJ/T11363-2006 ᷛ‫ޚ‬㾘ᅮⱘ䰤䞣㽕∖ҹϟDŽ
Indicates that the concentration of the hazardous substance in all homogeneous materials in the parts is
below the relevant threshold of the SJ/T11363-2006 standard.
h˖ 㸼⼎䆹᳝↦᳝ᆇ⠽䋼㟇ᇥ೼䆹䚼ӊⱘᶤϔഛ䋼ᴤ᭭Ёⱘ৿䞣䍙ߎ6-7ᷛ‫ޚ‬㾘ᅮⱘ䰤䞣㽕∖DŽ
Indicates that the concentration of the hazardous substance of at least one of all homogeneous materials
in the parts is above the relevant threshold of the SJ/T11363-2006 standard.
ᇍ䫔ଂП᮹ⱘ᠔ଂѻકᴀ㸼ᰒ⼎կᑨ䫒ⱘ⬉ᄤֵᙃѻકৃ㛑ࣙ৿䖭ѯ⠽䋼DŽ
This table shows where these substances may be found in the supply chain of electronic information
products, as of the date of sale of the enclosed product.
Installation Guide
ℸᷛᖫЎ䩜ᇍ᠔⍝ঞѻકⱘ⦃ֱՓ⫼ᳳᷛᖫᶤѯ䳊䚼ӊӮ᳝ϔϾϡৠⱘ⦃ֱՓ⫼ᳳ
՟བ⬉∴ऩ‫ܗ‬῵ഫ 䌈೼݊ѻકϞ
ℸ⦃ֱՓ⫼ᳳ䰤া䗖⫼Ѣѻકᰃ೼ѻક᠟‫ݠ‬Ё᠔㾘ᅮⱘᴵӊϟᎹ԰
The Environment- Friendly Use Period (EFUP) for all enclosed products and their parts are
per the symbol shown here. The Environment- Friendly Use Period is valid only when the
product is operated under the conditions defined in the product manual.
Connecting Required Cables
Safety and Regulatory Compliance
Install cables in accordance with all applicable local and national regulations and
practices.
Aruba Networks provides a multi-language document that contains country-specific restrictions and
additional safety and regulatory information for all Aruba access points. This document can be
viewed or downloaded from the following location: www.arubanetworks.com/safety_addendum
Verifying Post-Installation Connectivity
The integrated LEDs on the AP can be used to verify that the AP is receiving
power and initializing successfully (see Table 1). Refer to the ArubaOS Quick
Start Guide for further details on verifying post-installation network
connectivity.
Regulatory Model Names
Contacting Aruba Networks
Table 1
The following regulatory model names apply to the AP-103:

AP-103: APIN0103
FCC
Web Site Support
Main Site
http://www.arubanetworks.com
Support Site
https://support.arubanetworks.com
Software Licensing Site
https://licensing.arubanetworks.com/login.php
Wireless Security Incident
Response Team (WSIRT)
http://www.arubanetworks.com/support/wsirt.php
Americas and APAC Support Email
support@arubanetworks.com
EMEA Support Email
emea.support@arubanetworks.com
WSIRT Email
Please email details of any security
problem found in an Aruba product.
wsirt@arubanetworks.com
This device is electronically labeled. To view the FCC ID:
Configuring the AP-103
1.
Log into the controller WebUI.
2.
Navigate to Maintenance > Controller > About.
AP Provisioning/Reprovisioning
Provisioning parameters are unique to each AP. These local AP parameters are
initially configured on the controller which are then pushed out to the AP and
stored on the AP itself. Aruba recommends that provisioning settings be
configured via the ArubaOS Web UI only. Refer to the ArubaOS User Guide for
complete details.
RF Radiation Exposure Statement: This equipment complies with FCC
RF radiation exposure limits. This equipment should be installed and
operated with a minimum distance of 7.9 inches (20 cm) between the
radiator and your body for 2.4 GHz and 5 GHz operations. This transmitter
must not be co-located or operating in conjunction with any other antenna
or transmitter. When operated in the 5.15 to 5.25 GHz frequency range, this
device is restricted to indoor use to reduce the potential for harmful
interference with co-channel Mobile Satellite Systems.
AP Configuration
Configuration parameters are network or controller specific and are configured
and stored on the controller. Network configuration settings are pushed out to
the AP(s) but remain stored on the controller.
Configuration settings can be configured via the ArubaOS Web UI or ArubaOS
CLI. Refer to their respective guides for further details: the ArubaOS User Guide.
Telephone Support
FCC Class B Part 15
Aruba Corporate
+1 (408) 227-4500
This device complies with Part 15 of the Federal Communications Commission (FCC) Rules.
Operation is subject to the following two conditions:
FAX
+1 (408) 227-4550
1.
This device may not cause harmful interference.
2.
This device must accept any interference received, including interference that may cause
undesired operation.
Product Specifications
Electrical


Ethernet:
 1x 10/100/1000Base-T auto-sensing Ethernet RJ-45 Interface
 MDI/MDX
 IEEE 802.3 (10Base-T), IEEE 802.3u (100Base-T). IEEE 802.3ab (1000Base-T)
 Power over Ethernet (802.3af compliant), 48V DC (nominal) and 56V DC (maximum)/350mA
(see Figure 3 for pin configuration)
Power:
 12 VDC power interface, supports powering through an AC-to-DC power adapter
 POE support on Ethernet ports: 802.3af-compliant POE sourcing devices
For additional specifications on this product, please refer to the data sheet. The data sheet can be
found at www.arubanetworks.com.
Proper Disposal of Aruba Equipment
For the most current information about Global Environmental Compliance and Aruba products, see
our website at www.arubanetworks.com.
Waste of Electrical and Electronic Equipment
Aruba products at end of life are subject to separate collection and treatment
in the EU Member States, Norway, and Switzerland and therefore are marked
with the symbol shown at the left (crossed-out wheelie bin). The treatment
applied at end of life of these products in these countries shall comply with
the applicable national laws of countries implementing Directive 2002/96EC
on Waste of Electrical and Electronic Equipment (WEEE).
European Union RoHS
Aruba products also comply with the EU Restriction of Hazardous
Substances Directive 2011/65/EC (RoHS). EU RoHS restricts the use of
specific hazardous materials in the manufacture of electrical and
electronic equipment. Specifically, restricted materials under the RoHS
Directive are Lead (including Solder used in printed circuit assemblies), Cadmium, Mercury,
Hexavalent Chromium, and Bromine. Some Aruba products are subject to the exemptions listed in
RoHS Directive Annex 7 (Lead in solder used in printed circuit assemblies). Products and packaging
will be marked with the “RoHS” label shown at the left indicating conformance to this Directive.
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the manufacturer’s instructions, may cause
interference harmful to radio communications.
If this equipment does cause interference, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:


If a power adapter other than the one provided by Aruba Networks is used
in the US or Canada, it should be cULus (NRTL) Listed, with an output
rated 12 VDC, minimum 1.25A, marked “LPS” or “Class 2,” and suitable for
plugging into a standard power receptacle in the US and Canada.
Table 2


Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio or TV technician for help.
Copyright
Š 2014 Aruba Networks, Inc. AirWaveŽ, Aruba NetworksŽ, Aruba Mobility Management SystemŽ, Bluescanner,
For Wireless That WorksÂŽ, Mobile Edge Architecture, People Move. Networks Must Follow., RFProtectÂŽ, The All
Wireless Workplace Is Now Open For Business, and The Mobile Edge CompanyÂŽ are trademarks of Aruba
Networks, Inc. All rights reserved. All other trademarks are the property of their respective owners.
Open Source Code
Certain Aruba products include Open Source software code developed by third parties, including software code
subject to the GNU General Public License ("GPL"), GNU Lesser General Public License ("LGPL"), or other Open
Source Licenses. The Open Source code used can be found at this site:
http://www.arubanetworks.com/open_source
Legal Notice
The use of Aruba Networks, Inc. switching platforms and software, by all individuals or corporations, to terminate
other vendors' VPN client devices constitutes complete acceptance of liability by that individual or corporation for
this action and indemnifies, in full, Aruba Networks, Inc. from any and all legal actions that might be taken against
it with respect to infringement of copyright on behalf of those vendors.
Warranty
This hardware product is protected by an Aruba warranty. For details, see Aruba Networks standard warranty
terms and conditions.
Complies with the Class B limits for radio noise emissions as set out in the interference-causing
equipment standard entitled “Digital Apparatus,” ICES-003 of Industry Canada.
Cet apareil numerique de la classe B respecte toutes les exigencies du Reglement sur le materiel
brouilleur du Canada.
Users are advised that high power Radars are allocated as primary users of the bands 5250-5350 MHz
and 5650-5850 MHz and these Radars could cause interference and/or damage to Licensed Exempt
WLAN devices.
EU Regulatory Conformance
This product is CE marked according to the provisions of the R & TTE Directive
(1999/5/EC) - CE(!). Aruba Networks Inc., hereby declares that the APIN0103
device model is in compliance with the essential requirements and other relevant provisions of
Directive 1999/5/EC -CE(!)
The Declaration of Conformity made under Directive 1999/5/EC is available for viewing at the
following location: http://support.arubanetworks.com
Users are advised that high power Radars are allocated as primary users of the bands 5250-5350 MHz
and 5650-5850 MHz and these Radars could cause interference and/or damage to Licensed Exempt
WLAN devices.
Taiwan Class A Statement
Korean Class A Statement
www.arubanetworks.com
1344 Crossman Avenue
Sunnyvale, California 94089
Phone: 408.227.4500
Fax 408.227.4550
AP-103 Wireless Access Point | Installation Guide
Part Number 0511551-03 | October 2013

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Language                        : en
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/10/03-12:08:50
Creator Tool                    : FrameMaker 10.0.2
Modify Date                     : 2014:02:13 13:19:25+08:00
Create Date                     : 2013:01:10 15:04:05Z
Metadata Date                   : 2014:02:13 13:19:25+08:00
Format                          : application/pdf
Title                           : AP-103 IG Rev 03.fm
Creator                         : lxu
Producer                        : Acrobat Distiller 11.0 (Windows)
Document ID                     : uuid:583222a2-7f0c-4980-9b8e-68371ddd10a5
Instance ID                     : uuid:5804dcf3-b0bb-42f0-971f-660a8973dbab
Page Mode                       : UseNone
Page Count                      : 2
Author                          : lxu

EXIF Metadata provided by EXIF.tools