Hewlett Packard Enterprise APIN0228 Wireless Access Point User Manual AP228 datasheet

Download:
Mirror Download [FCC.gov]
Document ID	2533345
Application ID	g4dGsc2IP3vR6kZeOEcZAQ==
Document Description	AP228_datasheet
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	29.44kB (368062 bits)
Date Submitted	2015-02-12 00:00:00
Date Available	2015-03-10 00:00:00
Creation Date	2014-12-09 13:02:27
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2015-01-22 00:27:01
Document Title	AP228_datasheet
Document Creator	Adobe InDesign CS6 (Macintosh)

data sheet
ARUBA 228
ACCESS POINT
802.11ac for rugged indoor locations
Rugged indoor Aruba 228 wireless APs deliver
gigabit Wi-Fi performance to 802.11ac mobile
devices in harsh indoor environments such as
warehouses and stadiums
With a maximum data rate of 1.3 Gbps in the 5-GHz band
and 600 Mbps in the 2.4-GHz band, 220 series APs are
three-times faster than 802.11n APs and provide
performance similar to a wired connection.
The 228 APs include ClientMatch™ technology, which
eliminates sticky clients by continuously gathering session
performance metrics from mobile devices. This information
is then used to steer each mobile device to the best AP and
radio on the WLAN.
Proactive and deterministic, ClientMatch dynamically
optimizes Wi-Fi client performance as users roam and RF
conditions change. If a mobile device moves out of range of
an AP or RF interference impedes performance, ClientMatch
automatically steers it to a better AP.
With ClientMatch, 228 APs load web pages faster, deliver video
streams with improved quality and support high densities of
mobile devices. An 802.11ac network without ClientMatch
• Delivers 1.9 Gbps aggregate throughput.
--EtherChannel link aggregation on two Gigabit Ethernet
ports provides 1.9 Gbps throughput.
• 600 Mbps in the 2.4-GHz band.
--Supports up to 600 Mbps for TurboQAM-enabled mobile
devices operating in the 2.4-GHz band – an industry first.
• Best-in-class RF management
--Integrated Adaptive Radio Management™ technology
manages the 2.4-GHz and 5-GHz radio bands and
ensures that APs stay clear of RF interference.
• Spectrum analysis
--Capable of part-time or dedicated air monitoring, the
spectrum analyzer remotely scans the 2.4-GHz and
5-GHz radio bands to identify sources of RF interference.
• Wireless mesh
- Wireless mesh connections are convenient where
Ethernet drops are not available.
performs no different than an 802.11n WLAN.
The 228 APs additionally support priority handling and policy
enforcement for individual Microsoft Lync media on the
same device, including encrypted videoconferencing, voice,
chat and desktop sharing.
Unique benefits
• Industrial design for rugged indoor environments
- Extends temperature range for indoor environments
that lack heating and cooling
- Connectorized antenna ports support high gain
large public venue antennas
- Designed for enhanced physical security
• Security
--Integrated wireless intrusion protection offers threat
protection and mitigation and eliminates the need for
separate RF sensors and security appliances.
--With an OpenDNS service subscription, Aruba Instant
APs delivers integrated web filtering, malware and botnet
protection to every device connected to the WLAN.
--Encrypted IPsec VPN tunnels securely connect remote
users to corporate network resources.
--Integrated Trusted Platform Module (TPM) for secure
storage of credentials and keys.
--SecureJack-capable for secure tunneling of wired
Ethernet traffic.
data sheet
ARUBA 228 ACCESS POINTS
Choose yoUr operating mode
The 228 APs offer a choice of operating modes to meet your
unique management and deployment requirements.
• Controller-managed AP or Remote AP (RAP) running
ArubaOS™. When managed by Aruba Mobility Controllers,
228 APs offer centralized configuration, data encryption,
policy enforcement and network services, as well as
distributed and centralized traffic forwarding.
• Aruba Instant™ AP running InstantOS™. In Aruba Instant
mode, a single AP automatically distributes the network
configuration to other Instant APs in the WLAN. Simply
power-up one Instant AP, configure it over the air, and
plug in the other APs – the entire process takes about
five minutes.
• Spectrum analysis identifies sources of RF interference
• Air monitor provides wireless intrusion protection
• Hybrid AP serves Wi-Fi clients and provides wireless
intrusion protection and spectrum analysis
• Secure enterprise mesh
• Software-configurable dual radio supports 5 GHz
and 2.4 GHz
• 3x3 MIMO with three spatial streams and up to 1.3 Gbps
wireless data rate
• Supported frequency bands (country-specific
restrictions apply):
--2.4000 GHz to 2.4835 GHz
--5.150 GHz to 5.250 GHz
--5.250 GHz to 5.350 GHz
--5.470 GHz to 5.725 GHz
--5.725 GHz to 5.850 GHz
• Available channels: Dependent upon configured
regulatory domain
• Dynamic frequency selection (DFS) optimizes the use of
available RF spectrum
• Supported radio technologies:
--802.11b: Direct-sequence spread-spectrum (DSSS)
--802.11a/g/n/ac: Orthogonal frequency-division
multiplexing (OFDM)
--802.11n/ac: 3x3 MIMO with up to three spatial streams
• Supported modulation types:
For large installations across multiple sites, the Aruba Activate™
--802.11b: BPSK, QPSK, CCK
service significantly reduces deployment time by automating
--802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
device provisioning, firmware upgrades, and inventory
--802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
management. With Aruba Activate, Instant APs are factory-
• Transmit power: Configurable in increments of 0.5 dBm
shipped to any site and configure themselves when powered up.
• Maximum (aggregate, conducted total) transmit power
If WLAN and network requirements change, a built-in
migration path allows 228 Instant APs to become part of a
WLAN that is centrally managed by a Mobility Controller.
AP-228 SPECIFICATIONS
- 2.4-GHz (600 Mbps max) and 5-GHz (1.3 Gbps max)
radios, each with 3x3 MIMO and six external antenna
connectors.
(limited by local regulatory requirements):
- 2.4-GHz band: +28 dBm (23 dBm per chain)
- 5-GHz bands: +28 dBm (23 dBm per chain)
• Advanced cellular coexistence (ACC) feature to effectively
deal with interference from cellular systems
• Maximum ratio combining (MRC) for improved
receiver performance
• Cyclic delay diversity (CDD) for improved downlink
RF performance
• Short guard interval for 20-MHz, 40-MHz and
80-MHz channels
• Space-time block coding (STBC) for increased range and
improved reception
• Low-density parity check (LDPC) for high-efficiency error
Wireless radio specifications
• AP type: Indoor, dual radio, 5 GHz 802.11ac and
2.4 GHz 802.11n
--In addition to 802.11n data rates, the 2.4-GHz
radio supports 802.11ac data rates using 256-QAM
modulation. This gives TurboQAM-enabled clients a 33%
boost above the maximum supported data rate.
correction and increased throughput
• Transmit beam-forming (TxBF) for increased reliability in
signal delivery
data sheet
ARUBA 228 ACCESS POINTS
• Supported data rates (Mbps):
--802.11b: 1, 2, 5.5, 11
--802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
--802.11n: 6.5 to 450 (MCS0 to MCS23)
--802.11ac: 6.5 to 1,300 (MCS0 to MCS9, NSS = 1 to 3)
• 802.11n high-throughput (HT) support: HT 20/40
• 802.11ac very high throughput (VHT) support:
VHT 20/40/80
• 802.11n/ac packet aggregation: A-MPDU, A-MSDU
Power
• Worst-case power consumption from the AP (excluding
power drawn by an attached USB device): 23W
- 802.3az Energy Efficient Ethernet (EEE)
- PoE-PD: 48 Vdc 802.3at PoE+
• USB 2.0 port (Type A connector)
• Serial console interface (RJ-45)
Mounting
• Included with AP:
--Mounting brackets (2) for attaching to 9/16-inch or
15/16-inch T-bar drop-tile ceiling
• Optional mounting kits:
--AP-220-MNT-C2: Aruba 220 series AP mount kit contains
two ceiling-grid rail adapters for Interlude and Silhouette
style rails.
--AP-220-MNT-W1: Aruba 220 series AP mount kit contains
• Power sources sold separately
• Power over Ethernet (PoE+): 48 Vdc (nominal) 802.3atcompliant source
one flat-surface wall/ceiling mount bracket.
--AP-220-MNT-W2: Aruba 220 series AP mount kit contains
one flat-surface wall/ceiling secure mount cradle.
Mechanical
antennas
• Six RP-SMA connectors for external antennas.
Other interfaces
• Two 10/100/1000BASE-T Ethernet network interfaces (RJ-45)
--Auto-sensing link speed and MDI/MDX
--Load balancing support to achieve platform throughput
greater than 1 Gbps
• Dimensions/weight (unit, excluding mount accessories):
- 230 mm (W) x 220 mm (D) x 130 mm (H),
9.0” (W) x 8.7” (D) x 5.1” (H)
- 2145 g/76 oz
environmental
• Operating:
- Temperature: -40° C to +60° C (-40° F to +140° F)
- Humidity: 5% to 95% non-condensing
- Storage and transportation:
- Temperature: -40° C to +70° C (-40° F to +158° F)
data sheet
ARUBA 228 ACCESS POINTS
Regulatory
REGULATORY MODEL NUMBERS
• AP-228 and IAP-228: APIN0228
• FCC/Industry of Canada
• CE Marked
• R&TTE Directive 1995/5/EC
Certifications
• Low Voltage Directive 72/23/EEC
• CB Scheme Safety, cTUVus
• EN 300 328
• UL2043 plenum rating
• EN 301 489
• Wi-Fi Alliance certified 802.11a/b/g/n/ac
• EN 301 893
• UL/IEC/EN 60950
Warranty
• EN 60601-1-1, EN60601-1-2
For more country-specific regulatory information and
approvals, please see your Aruba representative.
• Limited lifetime warranty
Minimum operating system
software versions
• ArubaOS 6.4.3.0
• Aruba Instant 4.2.0.0
rF PerFOrMaNCe tabLe
Maximum transmit power (dbm)
per transmit chain
receiver sensitivity (dbm)
per receive chain
1 Mbps
23.0
-92.0
2 Mbps
23.0
-92.0
5.5 Mbps
23.0
-90.0
11 Mbps
23.0
-88.0
6 Mbps
23.0
-88.0
54 Mbps
18.0
-75.0
MCS0/8
23.0
-88.0
MCS7/15
17.0
-71.0
MCS0/8
23.0
-85.0
MCS7/15
17.0
-68.0
MCS0
23.0
-88.0
MCS9
16.0
-65.0
MCS0
23.0
-85.0
MCS9
16.0
-62.0
MCS0
23.0
-82.0
MCS9
16.0
-59.0
802.11b 2.4 ghz
802.11g 2.4 ghz and 802.11a 5 ghz
802.11n ht20 2.4 ghz and 5 ghz
802.11n ht40 2.4 ghz and 5 ghz
802.11ac vht20 5 ghz
802.11ac vht40 5 ghz
802.11ac vht80 5 ghz
data sheet
ARUBA 228 ACCESS POINTS
Ordering Information
Part Number
Description
AP-220 Series Access Points
AP-228
Aruba AP-228 Wireless Access Point, 802.11ac, 3x3:3, dual radio, antenna connectors
IAP-228-RW
Aruba Instant IAP-228 Wireless Access Point, 802.11ac, 3x3:3, dual radio, antenna connectors – Restricted
regulatory domain: Rest of World
IAP-228-US
Aruba Instant IAP-228 Wireless Access Point, 802.11ac, 3x3:3, dual radio, antenna connectors – Restricted
regulatory domain: United States
IAP-228-JP
Aruba Instant IAP-228 Wireless Access Point, 802.11ac, 3x3:3, dual radio, antenna connectors – Restricted
regulatory domain: Japan
AP-220 Series Access Points (FIPS/TAA)
AP-228-F1
Aruba AP-228 Wireless Access Point, 802.11ac, 3x3:3, dual radio, antenna connectors (FIPS/TAA)
data sheet
ARUBA 228 ACCESS POINTS
Ordering Information
Part Number
Description
Generic Indoor AP Accessories (see info on Aruba web site for part numbers)
PD-9001GR-AC
30W 802.3at POE midspan injector, 10/100/1000Base-T Ethernet
PoE injectors
Antennas
1344 Crossman Ave | Sunnyvale, CA 94089
1.866.55.ARUBA | T: 1.408.227.4500 | FAX: 1.408.227.4550 | info@arubanetworks.com
www.arubanetworks.com
©2015 Aruba Networks, Inc. Aruba Networks®, Aruba The Mobile Edge Company® (stylized), Aruba Mobilty Management System®, People Move. Networks Must
Follow.®, Mobile Edge Architecture®, RFProtect®, Green Island®, ETIPS®, ClientMatch®, Bluescanner™ and The All Wireless Workspace Is Open For Business™ are all
Marks of Aruba Networks, Inc. in the United States and certain other countries. The preceding list may not necessarily be complete and the absence of any mark from
this list does not mean that it is not an Aruba Networks, Inc. mark. All rights reserved. Aruba Networks, Inc. reserves the right to change, modify, transfer, or otherwise
revise this publication and the product specifications without notice. While Aruba Networks, Inc. uses commercially reasonable efforts to ensure the accuracy of the
specifications contained in this document, Aruba Networks, Inc. will assume no responsibility for any errors or omissions. DS_AP228Series_012015

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2014:12:09 13:02:27-08:00
Creator                         : Adobe InDesign CS6 (Macintosh)
Modify Date                     : 2015:01:22 00:27:01-08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2015:01:22 00:27:01-08:00
Creator Tool                    : Adobe InDesign CS6 (Macintosh)
Instance ID                     : uuid:83ab5eda-0187-dc47-862d-275650fb15e8
Original Document ID            : xmp.did:90BC2A4F152168118C14F46247E01B1B
Document ID                     : xmp.id:166358061C2068118083C9F464F9393F
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:604DFEF41B2068118083C9F464F9393F
Derived From Document ID        : xmp.did:E0B11DBB38206811822ABD53D1A74790
Derived From Original Document ID: xmp.did:90BC2A4F152168118C14F46247E01B1B
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Macintosh)
History Changed                 : /
History When                    : 2014:12:09 13:02:27-08:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 6

EXIF Metadata provided by EXIF.tools