Hisense Electric LCDF0022 Part15 Subpart B-LED LCD TV User Manual 32K366W Hisense QSG 2013 4 3

Hisense Electric Co., Ltd. Part15 Subpart B-LED LCD TV 32K366W Hisense QSG 2013 4 3

Contents

W9HLCDF0022_User Manual 1

Download: Hisense Electric LCDF0022 Part15 Subpart B-LED LCD TV User Manual 32K366W               Hisense QSG 2013 4 3
Mirror Download [FCC.gov]Hisense Electric LCDF0022 Part15 Subpart B-LED LCD TV User Manual 32K366W               Hisense QSG 2013 4 3
Document ID2005141
Application IDfP34dVwiLXfRjF6FvdOdcg==
Document DescriptionW9HLCDF0022_User Manual 1
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize273.11kB (3413855 bits)
Date Submitted2013-07-01 00:00:00
Date Available2013-07-04 00:00:00
Creation Date2013-04-15 13:53:53
Producing SoftwareAdobe PDF library 9.00
Document Lastmod2013-04-16 16:54:36
Document Title32K366W 北美 Hisense QSG 2013-4-3
Document CreatorAdobe Illustrator CS5

CY-G131517
Barcode
35*10.5mm
Video Effect:
BEST (HDMI)
REMOTE CONTROL
Stand column
Back View
Align the stand cover with the stand
column, then secure the stand cover to
the stand column with 1 Screw A (M5
x 12) . Make sure that the bottom of the
stand cover is flush against the top of
the stand column.
Increase volume
Decrease volume
Screw B
WARNING
To prevent internal damage to the TV and ensure the TV is
mounted securely, use only the 4 screws in the Screw B pack.
COMPONENT IN
PR
AV IN
PB
DIGITAL
AUDIO OUT
PC/DVI
AUDIO IN
Select
MENU
Return
EXIT
Exit
Setting Time Zone: Select the local time zone according to
your region.
Setting the Time: Press [ / ] to select the number you want
to set and press [▲/▼] to set.
TV Source
Choose Your TV Source
Home Mode
Antenna
Retail Mode
Cable
Enter
Select
MENU
Return
EXIT
Exit
Reduces total power consumption
ENTER
Enter
Select
MENU
Return
EXIT
Exit
Select if using an antenna for standard or HD TV
Press [▲/▼] to select your Picture Mode: Home Mode or
Retail Mode, press [ENTER] button to confirm.
If you select Retail Mode, a message appears “ Are you
sure you want retail mode?” Select “Yes” to continue, or
select “No” to change your selection.
For energy saving, we kindly suggest you select the Home
Mode.
Press [▲/▼] to select your TV Source: Antenna or Cable,
press [ENTER] button to confirm.
If you press [EXIT] to exit the scanning, a message appears
“Please Run Channel Auto Scan”, you should scan channels
from the menu of Channels
Note:
If you are using a cable or satellite box and you have connected it to the TV using a Coaxial cable, you should select the cable option. Be sure the cable or satellite box is turned
on before starting the channel scan. If you use a cable or satellite box connected to A/V, Component or HDMI, you don't need to scan for channels.
Not available
GUIDE
PC IN
VGA
Spacer × 4
Enter
If Automatic, options are automatically set by TV source
Go to the previous
channel
LAST
Media content control
function buttons
Time
ENTER
HEADPHONE Connect Headphone for audio out of the TV.
EN-22652A
HELP TOPICS
When there is something wrong with your TV, you can try turning off the TV and restarting it. You can also refer to the following chart
for problem and solution tips. If the problem cannot be resolved, please contact Hisense for additional assistance 1-888-935-8880.
VOLCH
DIGITAL
AUDIO OUT
AV IN
PB
L AUDIO R
PR
COMPONENT IN
Description
MENU
Display the on-screen menu to setup your TV’s features.
INPUT
Select the different input signal sources.
VOL+/-
Adjust the volume.
CH
Select the channel.
(Power button)
Turn on the TV or put the TV in standby mode.
Caution: The TV continues to receive power even in standby mode.
Unplug the power cord to disconnect power.
ANT/CABLE
Connect an antenna or cable TV to this jack.
HDMI
HDMI (High-Definition Multimedia Interface) provides an
uncompressed, all digital audio/video interface between this TV and
any HDMI-device, such as a set-top box, Blu-ray disc player, or A/V
receiver.
COMPONENT IN
Connect to a DVD player, Digital Set-Top-Box, or other A/V devices
with component (YPBPR) video and audio output jacks.
AV IN
Connect to the composite video and audio (L/R) output jacks on
external video devices.
VGA
PC/DVI AUDIO IN
Connect to a PC or other devices with a VGA or DVI interface.
/AUDIO OUT
1. Slide the back cover to open the battery compartment of the remote control.
2. Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with the (+)
and ( - ) ends indicated in the battery compartment.
3. Close the battery compartment cover.
Connect headphone or analog sound system using RCA Y-cable
(1/8"-stereo mini to L/R phono-not provided).
DIGITAL AUDIO OUT
Connect an audio amplifier to this jack.
USB
Port for Digital Media Player and for software update.
SPECIFICATIONS
Model Name
HDMI1/ARC
Item
OR
CHANGE THE BATTERIES
HDMI2
USB
DC 5V 0.5A(MAX)
AUDIO
OUT/
VIDEO
SYMPTOMS
AUDIO
OUT/
ANT/CABLE
CH
HDMI3
Bracket (1.5~2.5 mm)
DIGITAL AUDIO OUT Connect an optical cable from an external digital
Dash button select
a digital sub-channel
VOL+
INSTALLING A WALL-MOUNT BRACKET
2. Attach purchased bracket (1.5~2.5 mm thickness) on the TV
with the 4 screws in the Screw B pack.
Previous channel
audio system.
4 BUTTONS AND CONNECTORS
NOTES
Product image is only for reference, actual product may
vary in appearance. Carefully place your TV facedown on
a soft, cushioned surface to prevent damage to the TV or
scratching to the screen.
1. If you want to attach the TV to a wall-mount bracket (not
provided), you should first remove the stand if it is pre-attached.
Make sure the TV is laid face-down on a clean, safe, and
cushioned surface.
CH
CH.LIST
Display the channel name
AC power cord
MUTE
VOL
Exit
Home mode default settings are recommended for in-home
use. ENERGY STAR@ qualified.Retail mode is intended for
in-store display and resets video settings at Power On.
VGA & VGA AUDIO Connect a VGA cable and an audio cable from the PC.
Display the information banner
Mute button
Next channel
DISPLAY
EXIT
EXIT
Choose Your Picture Mode
ENTER
Close the menu
INPUT
If you want to attach the TV to a wall-mount bracket(not provided), you should
first remove the stand if it is pre-attached .
ENTER
Direct channel
selection
MENU
Display favorite list
Confirm selections
FAV.CH
MENU
▲/ / /
Move Up/Down/Left
/Right or adjust settings
Secure the stand to the TV with the 4
Screws A (M5 x 12).
Audio select button Mono/
Stereo/SAP operation
Media content control function
buttons
Return
On
2012
January
01
01:10 AM
Gently push and slide
Insert the batteries
Gently push and slide
Dimension
TV CONNECTORS
Weight
Check the jacks for position and type before making any connections. Loose
connections can result in image or color problems. Make sure that all connections are
tight and secure.
OR
Cable
ANT OUT
USB
DC 5V 0.5A(MAX)
Mobile Hard Disk
• Check the volume settings.
• Check if Mute mode is set "on" .
I have connected an external
source to my TV and I get no
picture and/or sound.
• Check for the correct output connection on the external source and for the correct input connection on the TV.
• Make sure you have made the correct selection for the input mode for the incoming signal.
• If black and white picture first unplug TV from AC outlet and replug after 60 seconds.
• Check Color Setting if picture is black and white.
Width: 44.3 inches (1124 mm)
Height: 28.7 inches (729 mm)
Depth: 11.1 inches (281 mm)
Width: 49.2 inches (1249 mm)
Height: 31.6 inches (803 mm)
Depth: 13.0 inches (330 mm)
Sound and picture distorted or
appear wavy.
• An electrical appliance may be affecting TV set. Turn off any appliances, if interference goes
away, move appliance farther away from TV.
• Insert the power plug of the TV set into another power outlet.
Sound and picture is blurry or
cuts out momentarily.
• If using an external antenna, check the direction, position and connection of the antenna.
• Adjust the direction of your antenna or reset or fine tune the channel.
[CH / V] don’t work when I
set the Channel to Cable?
They work with the Air setting?
• After switching to Cable, please auto program the channels. The TV will “remember” all the channels then
the TV will allow you to surf the channels with [CH /V] buttons.
Without Stand 39.7 lbs (18 kg)
52.9 lbs (24 kg)
46.3 lbs (21 kg)
61.7 lbs (28 kg)
49.6 inches
54.6 inches
With Stand
LCD Panel Minimum size
(diagonal)
Screen resolution
Audio power
Receiving channels
Tuner type
USB Connect a USB device for browsing photos, music and movies.
Picture is normal, but no sound
Sound but no picture or black
and white picture.
VHF/UHF Antenna
OR
• Confirm power cord is plugged into the AC outlet and the AC outlet is getting electricity.
• Attempt to power on unit using the power button on both the TV and the Remote.
Width: 49.2 inches (1249 mm)
Height: 29.0 inches (737 mm)
Depth: 2.3 inches (58 mm)
Power supply
Analog
Receiving
systems
Digital
ANT Connect an outdoor VHF/UHF antenna.
55K362G
No sound or picture
Width: 44.3 inches (1124 mm)
Without Stand Height: 26.2 inches (666 mm)
Depth: 2.5 inches (64 mm)
With Stand
50K362G
POSSIBLE SOLUTIONS
1920 × 1080
10 W + 10 W
120 V ~ 60 Hz
NTSC
ATSC / QAM
VHF: 2~13 UHF: 14~69 CATV: 1 ~ 125
Digital Terrestrial Broadcast (8VSB): 2 ~ 69
Digital cable (64/256 QAM): 1 ~ 135
Frequency synthesized
Environmental conditions
Temperature: 41°F ~ 95°F (5°C ~ 35°C)
Humidity: 20% ~ 80% RH
Atmospheric pressure: 86 kPa ~ 106 kPa
Component Input
VGA Input
480 I / 60 Hz, 480 P / 60 Hz, 720 P / 60 Hz, 1080 I / 60 Hz, 
VGA (640×480 / 60 Hz), SVGA (800×600 / 60 Hz), XGA (1024×768 / 60 Hz)
HDMI Input
RGB / 60 Hz (640×480, 800×600, 1024×768)
YUV / 60 Hz (480 I, 480 P, 720 P, 1080 I, )
Remote control does not work.
Align the front of the stand column
with the front of the base, then insert
the stand column into the base
making sure that the groove in the
stand column aligns with the ridge in
the base. Secure the stand column to
the base with 3 Screws A (M5 x 12) .
Menu button
M6
Follow instructions provided with the Wall-Mount bracket.
• If you are not sure of your ability to do complete the installation, contact a professional installer or service technician for
assistance. The manufacturer is not responsible for any
damages or injuries that occur due to mishandling or incorrect
assembly.
• Be sure to use the provider spacers between the TV and the
bracket when attaching the mount.
Groove
MTS/SAP
MENU
Picture Mode
GOOD
(AV)
VGA
Wall-Mount screw size (mm)
Stand cover
TIME
Display the current time
400 × 400
▲
Ridge
CCD
Zoom button
▲
ASPECT
PC/DVI
AUDIO IN
Wall-Mount hole pattern VESA (mm)
Follow the illustrations below to complete the installation steps.
SOUND
▲
INSTALLING THE STAND
SLEEP
Spacer
Adjust closed caption mode
COMPONENT
Select
Set menu language to English,Français, or Español
COMPONENT IN
Set the sleep timer
Screw
the TV’s rear cover
PICTURE
Enter
Connect your TV’s power cord to a power outlet, then press
power. The initial setup screen opens. Press [▲/▼] button to
select your language, press [ENTER] button to confirm.
VIDEO
Batteries: AAA × 2
HDMI
Select picture mode
Select Component source
L AUDIO R
Select HDMI source
Select sound mode
USB
AV IN
Spacer × 4
VGA
AV
PB
Wall-mount Bracket
TV
ENTER
VIDEO
Select TV AV VGA
USB source
Français
Screw B (M6 × 45) × 4
Screws B
9.5~12.5 mm
English
Auto
▲
Screw A (M5 × 12) × 8
Power on/off
Remote Control
Quick Setup Guide
Select input source
Choose Your Time Setting
Mode
Time Zone
Daylight Savings
Year
Month
Day
Español
PC IN
ACCESSORIES LIST
L AUDIO R
Remote sensor
Time Setting
Choose Your Menu Language
BETTER
(COMP)
PR
User Manual
TURNING THE TV ON FOR THE FIRST TIME
Menu Language
external A/V equipment.
K362G Series
▲
HDMI / COMP / AV Connect an HDMI cable or Comp/AV Adapter from an
• Confirm that TV still has power and is operational.
• Change the batteries in the remote control.
• Check if the batteries are correctly installed.
• Clean the front of the remote control (LED window).
• If using a universal remote, be sure to select the TV mode on the remote.
• If the remote still does not work:
-Remove and reinstall the batteries correctly to reset the remote or install new batteries.
-Press the Power button to turn on the TV. With a universal remote if you have reset or changed the batteries
you will need to reprogram the remote for the other units.
• Check if there is obstruction between the remote control and the TV.
TIP: If you have a digital camera / camera phone, you can aim the front of the remote at camera lenses (at
this time, the camera should set on camera mode, not play mode). Observe the camera screen while
pressing a button on the remote control; you should see flashing light on the screen. If there is no light
observed, the remote control is not working. You need to repair or replace the remote control.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.0-c060 61.134777, 2010/02/12-17:32:00
Format                          : application/pdf
Title                           : 32K366W 北美 Hisense QSG 2013-4-3
Metadata Date                   : 2013:04:16 16:54:36+08:00
Modify Date                     : 2013:04:16 16:54:36+08:00
Create Date                     : 2013:04:15 13:53:53+08:00
Creator Tool                    : Adobe Illustrator CS5
Thumbnail Width                 : 256
Thumbnail Height                : 104
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 12798 bytes, use -b option to extract)
Instance ID                     : uuid:d2610cc0-a1ea-4d60-959b-95212d2c2ee2
Document ID                     : xmp.did:8AF824EF87A5E2118638B45927BD09F5
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:ca96ce16-6fb0-46bd-94c2-8cd9d6b0a601
Derived From Document ID        : xmp.did:BCD664080FA0E211A54BD882397E327B
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : converted, saved, converted, converted, saved, saved, saved, saved, saved, converted, saved, converted, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, converted, saved, converted, saved, converted, saved, converted, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:D27F11740720681191099C3B601C4548, xmp.iid:F97F1174072068118D4ED246B3ADB1C6, xmp.iid:FA7F1174072068118D4ED246B3ADB1C6, xmp.iid:EF7F117407206811A46CA4519D24356B, xmp.iid:F07F117407206811A46CA4519D24356B, xmp.iid:F77F117407206811BDDDFD38D0CF24DD, xmp.iid:F97F117407206811BDDDFD38D0CF24DD, xmp.iid:FA7F117407206811BDDDFD38D0CF24DD, xmp.iid:FB7F117407206811BDDDFD38D0CF24DD, xmp.iid:FC7F117407206811BDDDFD38D0CF24DD, xmp.iid:FD7F117407206811BDDDFD38D0CF24DD, xmp.iid:FE7F117407206811BDDDFD38D0CF24DD, xmp.iid:B233668C16206811BDDDFD38D0CF24DD, xmp.iid:B333668C16206811BDDDFD38D0CF24DD, xmp.iid:B433668C16206811BDDDFD38D0CF24DD, xmp.iid:F77F11740720681197C1BF14D1759E83, xmp.iid:F87F11740720681197C1BF14D1759E83, xmp.iid:F97F11740720681197C1BF14D1759E83, xmp.iid:FA7F117407206811B628E3BF27C8C41B, xmp.iid:FF7F117407206811B628E3BF27C8C41B, xmp.iid:07C3BD25102DDD1181B594070CEB88D9, xmp.iid:F87F1174072068119098B097FDA39BEF, xmp.iid:F77F117407206811BB1DBF8F242B6F84, xmp.iid:F97F117407206811ACAFB8DA80854E76, xmp.iid:0180117407206811834383CD3A8D2303, xmp.iid:01E540664A3DDD11BD33D3EB8D3A1068, xmp.iid:6B6AE2A5723EDD11A6F1BABF7C5A7A51, xmp.iid:23383BFEA441DD11A6AECB58D53C8B28, xmp.iid:086F577ABE41DD11A6AECB58D53C8B28, xmp.iid:AB13E98E200911689FE8CB9EA85C5459, xmp.iid:93D9A2DF7848DD11BB47877F8DDF9079, xmp.iid:FA7F117407206811B34B80FC905F8DB1, xmp.iid:F77F11740720681197A5C6DA8C2593EE, xmp.iid:F87F11740720681197A5C6DA8C2593EE, xmp.iid:4CF5D4E1A742E21185CEDBAF88DE2D36, xmp.iid:0F28FC10FF43E2119BFAC9E0643037EF, xmp.iid:131DCDA3A84DE2119E7D97C13BD4994D, xmp.iid:9BC90B948D50E2118C74B83EB26CC183, xmp.iid:9CC90B948D50E2118C74B83EB26CC183, xmp.iid:B1313F9F0453E211A2089BA195CDD77B, xmp.iid:B2313F9F0453E211A2089BA195CDD77B, xmp.iid:09B917601453E2118D39879A30635163, xmp.iid:0AB917601453E2118D39879A30635163, xmp.iid:B4281AF28596E211AAE190A92035E129, xmp.iid:B5281AF28596E211AAE190A92035E129, xmp.iid:5A6C1917969AE211970BB8F930CBBD14, xmp.iid:5B6C1917969AE211970BB8F930CBBD14, xmp.iid:6DECB28ABA9AE211A1ABBB69463E2FA7, xmp.iid:6EECB28ABA9AE211A1ABBB69463E2FA7, xmp.iid:9EA02B7E5C9BE21199BBFC4FECFEED7D, xmp.iid:9FA02B7E5C9BE21199BBFC4FECFEED7D, xmp.iid:C430C565569CE211AD29AFC5BF3DA2A7, xmp.iid:BCD664080FA0E211A54BD882397E327B, xmp.iid:8AF824EF87A5E2118638B45927BD09F5
History When                    : 2008:04:17 14:19:15+05:30, 2008:05:15 16:23:06-07:00, 2008:05:15 17:10:45-07:00, 2008:05:15 22:53:33-07:00, 2008:05:15 23:07:07-07:00, 2008:05:16 10:35:43-07:00, 2008:05:16 10:40:59-07:00, 2008:05:16 11:26:55-07:00, 2008:05:16 11:29:01-07:00, 2008:05:16 11:29:20-07:00, 2008:05:16 11:30:54-07:00, 2008:05:16 11:31:22-07:00, 2008:05:16 12:23:46-07:00, 2008:05:16 13:27:54-07:00, 2008:05:16 13:46:13-07:00, 2008:05:16 15:47:57-07:00, 2008:05:16 15:51:06-07:00, 2008:05:16 15:52:22-07:00, 2008:05:22 13:28:01-07:00, 2008:05:22 16:23:53-07:00, 2008:05:28 16:45:26-07:00, 2008:06:02 13:25:25-07:00, 2008:06:09 14:58:36-07:00, 2008:06:11 14:31:27-07:00, 2008:06:11 22:37:35-07:00, 2008:06:18 22:24:01+07:00, 2008:06:19 20:30:34-07:00, 2008:06:24 14:13:53+08:00, 2008:06:24 15:23:44+08:00, 2008:06:26 06:03:48-07:00, 2008:07:02 13:54:27-07:00, 2008:07:21 16:58:31+05:30, 2008:09:05 03:21:29-07:00, 2008:09:05 04:21:56-07:00, 2012:12:10 16:59:19+08:00, 2012:12:12 09:55:55+08:00, 2012:12:24 17:02:27+08:00, 2012:12:28 09:26:17+08:00, 2012:12:28 10:12:32+08:00, 2012:12:31 12:43:29+08:00, 2012:12:31 12:49:52+08:00, 2012:12:31 14:36:15+08:00, 2012:12:31 16:24:21+08:00, 2013:03:27 10:28:01+08:00, 2013:03:27 10:40:11+08:00, 2013:04:01 14:33:39+08:00, 2013:04:01 16:16:54+08:00, 2013:04:01 18:54:35+08:00, 2013:04:01 18:56:06+08:00, 2013:04:02 14:13:53+08:00, 2013:04:02 14:18:18+08:00, 2013:04:03 20:02:46+08:00, 2013:04:08 13:42+08:00, 2013:04:15 13:53:55+08:00
History Software Agent          : Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS5, Adobe Illustrator CS5
History Changed                 : /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /
History Params                  : from application/vnd.adobe.illustrator to application/vnd.adobe.illustrator
Startup Profile                 : Print
Has Visible Overprint           : True
Has Visible Transparency        : True
N Pages                         : 1
Max Page Size W                 : 840.000062
Max Page Size H                 : 419.999859
Max Page Size Unit              : Millimeters
Font Name                       : ArialSpecialG1, ArialMT, Arial-BoldMT, MyriadPro-BlackIt, MyriadPro-Black, MyriadPro-BoldIt, MyriadPro-Bold, MyriadPro-Regular, MyriadPro-BoldCondIt, MyriadPro-BoldCond, MyriadPro-SemiboldCond, Tahoma, AdobeSongStd-Light, TitilliumMaps29L-800wt, TitilliumText25L-400wt
Font Family                     : Arial Special G1, Arial, Arial MT, Myriad Pro, Myriad Pro, Myriad Pro, Myriad Pro, Myriad Pro, Myriad Pro, Myriad Pro, Myriad Pro, Tahoma, Adobe 宋体 Std, TitilliumMaps29L 800wt, TitilliumText25L 400wt
Font Face                       : Regular, Regular, Bold, Black Italic, Black, Bold Italic, Bold, Regular, Bold Condensed Italic, Bold Condensed, Semibold Condensed, Regular, L, 800wt, 400wt
Font Type                       : TrueType, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Unknown, Unknown
Font Version                    : Version 1.03, Version 3.00, 001.001, OTF 1.006;PS 001.000;Core 1.0.23;hotunix 1.28, OTF 1.006;PS 001.000;Core 1.0.23;hotunix 1.28, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.006;PS 002.000;Core 1.0.38;makeotf.lib1.6.6565, Version 3.15, Version 5.010;PS 5.002;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895
Font Composite                  : False, False, False, False, False, False, False, False, False, False, False, False, False, False, False
Font File Name                  : Arial Special G1.ttf, ARIAL.TTF, arial-boldmt.otf, MyriadPro-BlackIt.otf, MyriadPro-Black.otf, MyriadPro-BoldIt.otf, MyriadPro-Bold.otf, MyriadPro-Regular.otf, MyriadPro-BoldCondIt.otf, MyriadPro-BoldCond.otf, MyriadPro-SemiboldCond.otf, TAHOMA.TTF, AdobeSongStd-Light.otf, MyriadPro-Regular.otf, MyriadPro-Regular.otf
Plate Names                     : Cyan, Magenta, Yellow, Black, PANTONE Yellow C
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Group Name        : 鲜艳
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Cyan    : 60.000002
Swatch Groups Colorants Magenta : 90.000004
Swatch Groups Colorants Yellow  : 0.003099
Swatch Groups Colorants Black   : 0.003099
Producer                        : Adobe PDF library 9.00
Page Count                      : 1
Creator                         : Adobe Illustrator(R) 15.0
For                             : ΰΰ,
Bounding Box                    : -2946 -2 0 1191
Container Version               : 11
Creator Version                 : 15
EXIF Metadata provided by EXIF.tools
FCC ID Filing: W9HLCDF0022

Navigation menu