Hisense Electric LCDF0110 LED LCD TV User Manual TempConfidential W9HLCDF0110 1
Hisense Electric Co., Ltd. LED LCD TV TempConfidential W9HLCDF0110 1
Contents
TempConfidential_W9HLCDF0110_User Manual 1
USER MANUAL
Before using the TV, please read this manual
thoroughly and retain it for future reference.
ENGLISH
1
ENGLISH FRANÇAIS ESPAÑOL
Copyright Statement
© 2017 Hisense Company Ltd. All Rights Reserved.
All material in this User Manual is the property of Hisense Company Ltd. and its subsidiaries, and is protected under
US, CANADA, MEXICO and International copyright and/or other intellectual property laws. Reproduction or transmission
of the materials, in whole or in part, in any manner, electronic, print, or otherwise, without the prior written consent of
Hisense Company Ltd. is a violation of Hisense Company Ltd. rights under the aforementioned laws.
No part of this publication may be stored, reproduced, transmitted or distributed, in whole or in part, in any manner,
electronic or otherwise, whether or not for a charge or other or no consideration, without the prior written permission of
Hisense Company Ltd.
Requests for permission to store, reproduce, transmit or distribute materials may be made to one of the following
addresses:
USA: Hisense USA Corporation
PO Box 3289
Suwanee, GA 30024
CANADA: Hisense Canada Co., Ltd
2283 Argentia Road, Unit 16
Mississauga, ON, Canada
L5N 5Z2
MEXICO: Hisense Mexico S de RL de CV
Boulevard Miguel de Cervantes Saavedra No. 301, Torre Norte, Piso 2,
Colonia Ampliación Granada, C.P. 11520, en México Distrito Federal.
Hisense, and any and all other Hisense product names, logo’s, slogans or marks are registered trademarks of Hisense
Company Ltd. and its subsidiaries. All other trademarks are the property of their respective holders.
©2017. All rights reserved. Hisense and the Hisense logo are registered trademarks of Hisense. Other brand and
product names are registered trademarks of their respective owners.
2
ENGLISH FRANÇAIS ESPAÑOL
Disclaimer Page
**Notwithstanding anything to the contrary, including in any or all descriptions, representations, statements or other
communications related to this Hisense device (hereinafter “Device”) made in any form whatsoever and at any time,
some or all of the pre-installed, or subsequently installed Application Services may not be available or capable of
functioning as intended by the provider of the Application Services in any or all usage areas for reasons outside of
Hisense’s control, including but not limited to, Internet access, local service limitations, etc. Any purchase or use
of the Device, including any Application Services, is purely at the user’s risk. Application Services are provided on
an as-available basis without warranties of any kind, either expressed or implied, that the Application Service will be
uninterrupted or error-free, including but not limited to vagaries of weather, disruption of Service, acts of God, warranties
of title, local or regional limitations, no infringement, NOR IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. No advice or information given by Hisense, providers, affiliates, or contractors or
their respective employees shall create such a warranty. Hisense specifically disclaims responsibility for any or all
Application Services from functioning at any time, and by purchasing the Device, you accept such disclaimer without
any claim on Hisense. You are solely responsible for providing an active and working connection to the Internet, along
with any and all hardware and/or software necessary to use the Hisense Device as intended.
Disclaimer:
Images throughout this document are for illustrative purposes only and may differ from the actual product.
3
ENGLISH FRANÇAIS ESPAÑOL
Content
Content ...............................................................................................................3
Connecting Devices to your TV ........................................................................5
Connecting an antenna, cable set-top box or satellite receiver ................................................5
Connecting a satellite receiver, DVD player or other audio visual (AV) device with a
composite video cable (yellow/red/white)..................................................................................5
Connecting an AV device with a component video cable (red/blue/green) ............................. 6
Connecting an AV device with an HDMI cable .......................................................................... 6
Connecting an MHL-Enabled device ......................................................................................... 7
Connecting a headphone ..........................................................................................................7
Connecting speakers or other audio receivers .......................................................................... 7
Connecting a digital sound bar to use Audio Return Channel (ARC)........................................8
Connecting a USB device .......................................................................................................... 8
Connecting Your TV to a Wireless or Wired Network .....................................9
Connecting to a wireless network ..............................................................................................9
Connecting to a wired (Ethernet) network................................................................................10
Using Your TV Remote Control .......................................................................11
Buttons on your TV remote ....................................................................................................... 11
Remote control range information ............................................................................................ 11
Begin using your remote ..........................................................................................................12
Completing the First-Time Setup Menu .........................................................13
Shortcuts Instructions .....................................................................................14
Turning your TV on or off .......................................................................................................... 14
Selecting the input source .......................................................................................................14
Using the Live TV .....................................................................................................................14
Using the Menu Function .........................................................................................................16
Basic Settings ..................................................................................................17
Using the Settings Menu ..........................................................................................................17
Picture Menu ............................................................................................................................18
Sound Menu .............................................................................................................................19
Network Menu ..........................................................................................................................20
Channel Menu ..........................................................................................................................20
Accessibility .............................................................................................................................21
System Menu ...........................................................................................................................21
Support Menu ..........................................................................................................................22
Parental Controls ...................................................................................................................... 23
4
ENGLISH FRANÇAIS ESPAÑOL
Advanced TV Settings .....................................................................................25
Getting familiar with the Home screen .....................................................................................25
Notifications .............................................................................................................................25
All Apps .................................................................................................................................... 26
Media .......................................................................................................................................27
Edit ...........................................................................................................................................27
Using Anyview Cast to mirror content from your device to the TV screen...............................28
Software updates for your TV ................................................................................................... 29
Quick Problem-Solving Tips ...........................................................................30
5
ENGLISH FRANÇAIS ESPAÑOL
Connecting Devices to your TV
You have several options for connecting your TV to different devices. The method in which you connect will be based
upon the type of cables you have and the available outputs on your device.
Connecting an antenna, cable set-top box or satellite receiver
To connect an antenna,cable set-top box or satellite receiver:
1. Connect one end of a coaxial cable (not included) to the RF OUT port on the antenna, cable or satellite box. If you
are using an antenna with twin-lead cable, you may need a 300-75 Ohm adapter (not provided) to connect it to the
back of your TV. Likewise, if you are using several antennas, you may need a combiner (not provided).
2. Connect the other end of the cable to the ANT/CABLE port on the side of TV.
3. Using your remote, press the [INPUT] button and select ANT/CABLE as the input source.
Connecting a satellite receiver, DVD player or other audio visual (AV)
device with a composite video cable (yellow/red/white)
To connect an AV device with a composite video cable (not provided):
1. Use the audio and video cables to connect the composite video/audio ports of the external AV device to the AV IN
ports of the TV. (Video = yellow, Audio Left = white, and Audio Right = red)
2. Plug the connected devices into the AV connectors on the TV before switching it on.
3. Using your remote, press the [INPUT] button and select AV as the input source.
or ANT OUT
Cable Set top box
RF Out
EXTERNAL DEVICE
TV PORT
ANT/CABLE
AV OUT
Video
L
R
White (L)White (L)
Yellow (Video)Yellow or Green (Video)
Video Cable
Red (R)Red (R)
Audio Cable
TV PORTS
EXTERNAL DEVICES
DVD Player/Recorder
Video
Camera Set-top box
Satellite Receiver
Satellite
antenna
cable
VCR
VIDEOL R
AV IN
6
ENGLISH FRANÇAIS ESPAÑOL
Connecting an AV device with a component video cable (red/blue/green)
To connect an AV device with a component cable (not provided):
1. Use a component video cable to connect the component output ports of the external device to the YPBPR ports
for the TV. (Y = green, PB = blue, and PR = red). Use an audio cable to connect the component audio ports of the
external device to the TV AUDIO (L/R) ports.
2. Plug the connected devices into the YPBPR and L/R ports on the TV before switching it on.
3. Using your remote, press the [INPUT] button and select COMPONENT as the input source.
NOTE
• One AV device can be connected to the TV using a component video or composite video cable.
Connecting an AV device with an HDMI cable
This 4K TV has two different software versions of HDMI ports to connect HDMI-enabled devices. The two high-powered
HDMI version 2.0 inputs enable you to connect 4K Ultra-HD external devices that require more bandwidth to transmit
to the TV screen. For example, if you have an X-box or Blu-ray player that supports the 2.0 standard. The two HDMI
version 1.4 inputs are great for any of your external devices that support a standard full high-definition resolution of
1080p.
Please refer to the User Manual that came with your device for step-by-step instructions.
To connect an AV device with an HDMI cable (not provided):
1. Use an HDMI cable to connect the HDMI output port of the AV device to the HDMI port of the TV.
2. Plug the connected devices into the HDMI port on the TV before switching it on.
3. Using your remote, press the [INPUT] button and select the corresponding HDMI input.
NOTES
• Because the HDMI connector provides video and audio signals, it is not necessary to connect an audio cable.
• We strongly recommend to use HDMI Cable with 2 cores as shown in the figure.
EXTERNAL DEVICES
DVD Player/Recorder
Video
Camera Set-top box
Satellite Receiver
Satellite
antenna
cable
VCR
White(L) White(L)
Red(R) Red(R)
Audio Cable
Component Cable
Component
R
L
PR
PB
Y
Red(PR/CR)Red(PR/CR)
Blue(PB/CB)Blue(PB/CB)
Green(Y) Green(Y)
TV PORTS
AV IN
COMPONENT IN
VIDEO L
YPBPR
R
HDMI
HDMI
EXTERNAL DEVICES
DVD
Set-top Box
TV PORT
HDMI Cable
7
ENGLISH FRANÇAIS ESPAÑOL
Connecting an MHL-Enabled device
You can connect an MHL-enabled device, such as
a cell phone, and view the screen of your device on
the TV.
1. Connect one end of an HDMI-to-MHL cable (not
provided) to the micro USB port on the device.
2. Connect the other end of the cable to the HDMI /
MHL port.
3. Select the corresponding source from the TV.
NOTES
• This feature may be unavailable on some TV series.
• We strongly recommend to use MHL Cable with 2 core as shown in the figure.
Connecting a headphone
You can connect headphone (not provided) to the
AUDIO OUT port on your TV. While the headphone
is connected, the sound from the built-in speakers
will be disabled.
Connecting speakers or other audio receivers
To connect speakers or other audio receivers with an audio cable (not provided):
1. Use an audio cable to connect the digital audio in port of the audio receiver device to the DIGITAL AUDIO OUT
port of the TV. Another option is to use an RCA Y-cable (1/8”-stereo mini to L/R phono) to connect an analog sound
system to the AUDIO OUT port of the TV.
2. Plug the connected devices into the main power socket before switching on the TV.
• TIP: If you prefer to use Audio Return Channel, then see Connecting a digital sound bar to use Audio Return Channel
(ARC) on page 8.
NOTES
• When a digital audio system is connected to the DIGITAL AUDIO OUT port, decrease the TV and system volume.
• 5.1 CH (channel) audio is available when the TV is connected to an external device that supports a 5.1 channel
surround sound
• You can receive 5.1 channel audio in one of two ways. The first way is to connect the DIGITAL AUDIO OUT port
from the device to the Amplifier. The second way is to connect the DIGITAL AUDIO OUT port on the back of the
TV to the Optical port on the Amplifier. After you’ve completed one of the two methods then be sure to go into the
Advanced Audio Settings of the TV and select RAW to receive the 5.1 channel audio. You will need to also go
into the sound or audio settings of your device to ensure it is set to 5.1 Channel output. It may read ‘Bitstream’, ‘RAW’
or ‘Digital’.
HDMI
MHL
EXTERNAL
DEVICE
Cell Phone
TV PORT
HDMI-to-MHL Cable
TV PORT EXTERNAL DEVICE
Headphone
AUDIO
OUT
EXTERNAL DEVICES
Powerless
Bass Speaker
Speaker
Digital Sound Bar
Audio Amplifier
DIGITAL
AUDIO OUT
TV PORTS
Audio Cable
White(L)
Red(R)
Audio Cable
AUDIO
OUT
8
ENGLISH FRANÇAIS ESPAÑOL
Connecting a digital sound bar to use Audio Return Channel (ARC)
If you’d like to use the Audio Return Channel (ARC) feature to have sound sent from the TV back down an HDMI cable
to a digital sound bar, then you will need to connect the cable to the HDMI / ARC port. By using this feature, you will
also be able to control the sound bar with your TV remote instead of having to use multiple remotes for each device.
To connect a digital sound bar with an HDMI cable (not provided):
1. Connect the cable that’s attached to the sound bar to the HDMI / ARC port on the TV.
2. Turn on the sound bar by pressing the Power button.
3. Press the [ ] button on your remote and press the [ ˅ ] button of your remote to select Settings, then press [OK]
to enter the Settings menu, go to System > CEC Function.
4. Turn on the CEC Control setting.
5. Turn on the Audio Receiver setting.
NOTES
• Only digital sound bars that require a wired connection are compatible with the TV.
• If the device has an Input Selector feature then make sure to change it to TV.
Connecting a USB device
You can connect the USB devices such as hard
drives, USB sticks and digital cameras for browsing
photos, listening music and watching recorded
movies.
1. Connect a USB device into the USB port.
2. Select the Media type on the Media screen or
Home screen. For more information, see Media on page 27.
NOTES
• When connecting a hard disk or a USB hub, always connect the mains adapter of the connected device to the
power supply. Exceeding a total current consumption may result in damage. The USB1.1 and USB2.0 devices
maximum current consumption are 500mA. The USB3.0 device maximum current consumption is 1A.
• For individual non-standard high-capacity mobile hard disk, if it’s impulse current is greater than or equal 1A, it
may cause TV-rebooting or self-locking. So the TV does not support it.
• The USB port supports a voltage of 5V.
HDMI
ARC
HDMI
EXTERNAL DEVICE
TV PORT
HDMI Cable
Digital Sound Bar
TV PORTS EXTERNAL DEVICE
USB
DC 5V 1A(MAX)
USB
DC 5V 0.5A(MAX)
ENGLISH FRANÇAIS ESPAÑOL
9
Connecting Your TV to a Wireless or Wired Network
You have the option to connect your TV to a wireless or wired network to access the Internet. For more information about
the network settings on TV, see Network Menu on page 20.
Connecting to a wireless network
Our built-in wireless LAN adapter supports the IEEE 802.11 ac/b/g/n communication protocols and we recommend that
you use an IEEE 802.11n or IEEE 802.11ac router. When you play a video over an IEEE 802.11 b/g connection, the
video may not play smoothly.
NOTES
• You must use the built-in Wireless LAN Adapter to use a wireless network because the set does not support an
external USB network adapter.
• To use a wireless network, your TV must be connected to a wireless IP sharer. If the wireless IP sharer supports
Dynamic Host Configuration Protocol (DHCP), your TV can use a DHCP or static IP address to connect to the
wireless network.
• Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP
sharer is currently being used by another device nearby, this will result in interference and communication failure.
• If you apply a security system other than the systems listed below, it will not work with the TV.
• If Pure High-throughput (Greenfield) 802.11N mode is selected and the Encryption type is set to WEP, TKIP or
TKIP-AES (WPS2 Mixed) for your Access Point (AP), then the TV will not support a connection in compliance with
these Wi-Fi certification specifications.
• If your access point (AP) supports Wi-Fi Protected Setup (WPS), you can connect to the network via Push Button
Configuration (PBC) or PIN (Personal Identification Number). WPS will automatically configure the SSID and WPA
key in either mode.
Wireless Adapter
built-in the TV set LAN Cable
Wireless Router The LAN Port on the Wall
10
ENGLISH FRANÇAIS ESPAÑOL
Connecting to a wired (Ethernet) network
You can attach your TV to your LAN in one of the three following ways:
Option 1
You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an external modem using a
Cat 5 LAN cable. See the illustration below.
Option 2
You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an IP Sharer which is
connected to an external modem. Use an Ethernet cable for the connection. See the illustration below.
Option 3
Depending on how your network is configured, you may be able to attach your TV to your LAN by connecting the LAN
port on the back of your TV directly to a network wall outlet with an Ethernet cable. See the diagram below.
If you have a Dynamic Network, you should use an ADSL modem or router that supports Dynamic Host Configuration
Protocol (DHCP). Modems and routers that support DHCP automatically provide the IP address, subnet mask, gateway,
and DNS, so you don’t have to enter them manually. Most home networks are Dynamic Networks.
Some networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address,
subnet mask, gateway, and DNS values manually on your TV’s Cable Setup Screen when you set up the network
connection. To get the IP address, subnet mask, gateway and DNS values, contact your Internet Service Provider (ISP).
NOTE
• You can use ADSL modems that support DHCP if your network requires a static IP address. ADSL modems that
support DHCP also let you use static IP addresses.
External Modem
(ADSL / VDSL / Cable TV)
The Modem Port on the Wall
Ethernet Cable Modem Cable
LAN
TV PORT
External Modem
(ADSL / VDSL / Cable TV)
The Modem Port on the Wall
Modem Cable
IP Sharer (Router)
(with DHCP server)
Ethernet Cable
Ethernet Cable
LAN
TV PORT
The LAN Port on the Wall
Ethernet Cable
LAN
TV PORT
11
ENGLISH FRANÇAIS ESPAÑOL
Using Your TV Remote Control
Buttons on your TV remote
Remote control range information
The remote control can work at a distance of up to 26 feet in front of the TV set.
It can work at a 30 degree horizontal or vertical angle.
VO
LC
H
OK
CC
BACK
TV
EXIT
INPUT
MTS
NRT
Power on / off
Enter Channels / input numbers
Media content control function buttons
Dash button
Select a digital sub-channel
D-pad (up/down/left/right
navigation buttons)
Volume (up / down)
Set the audio language(MTS)
Choose to leave the Video description
feature On or Off
Live TV
Return to the previous place
in the menu or app
Mute and restore sound
Infrared transmitter
Change TV input source
Channel (up / down)
Exit the application
Turn Closed Caption On / Off
Special function buttons
The button for the Quick setup menu
Display the Home screen
Conrm button
Quick access buttons to apps
12
ENGLISH FRANÇAIS ESPAÑOL
Begin using your remote
1. Slide the back cover to open the battery compartment of the remote control.
2. Insert two AAA size batteries. Make sure to match the (+) and (-) ends of the batteries with the (+) and (-) ends
indicated in the battery compartment.
3. Replace the battery compartment cover.
NOTES
• Discard batteries in a designated disposal area. Do not throw them into a fire.
• Remove old batteries immediately to prevent them from leaking into the battery compartment.
• If you do not intend to use the remote control for a long time, remove the batteries.
• Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth. If chemicals
touch your skin then wash it immediately.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable (NiCd, NiMH, etc.) batteries.
• Do not continue using the remote if it gets warm or hot.
• Call our Support Center immediately on the support website.
Program your universal cable or satellite remote control to operate your new television (only for
USA)
If you would like to program your other household remote controls to your new television,please refer to the User’s
Manual supplied by your Cable or Satellite provider. The Cable or Satellite providers’ User’s Manuals should include
instructions on how to program their remote to your television.
A list of codes for the most common Cable and Satellite providers are listed below. Use the code that is associated with
your Cable or Satellite provider (if applicable).
DIRECTV
0178, 10178, 10019, 10748, 11314, 11660, 11710, 11780, 12049, 10171, 11204, 11326, 11517, 11564, 11641, 11963,
12002, 12183
Time Warner Cable
386, 0178, 10178, 400, 450, 461, 456, 0748, 1463, 0463, 10463
Comcast
0178, 10178, 10463, 11463, 10748, 11314, 11660, 10171, 11204, 11326, 11517, 11641, 11780, 11785, 11892, 11963,
12002
Cox Communications
0178, 10178, 1326, 1463
Dish Network
505, 627, 538, 720, 659
If the code associated with your Cable or Satellite provider is not listed, does not work or you cannot locate the
instructions to program your remote, call your local Cable or Satellite provider’s customer service center.
If your Cable or Satellite provider does not have a code available, please contact us.
Using your cable set-top box or satellite receiver remote as a ‘universal’ remote
If you prefer to use your Cable Set-top Box or Satellite Receiver Remote as a ‘Universal Remote’, then visit the Support
page to view a list of the codes.
1 2 3
13
ENGLISH FRANÇAIS ESPAÑOL
Completing the First-Time Setup Menu
Press the [ ]] button on the remote to turn on the TV.
After the splash screen that displays the logo appears, begin the first-time setup menu.
Screen Task
Language and
Location Using the D-pad arrows of your remote, choose your Language, Country and Time Zone.
End User License
Agreement Choose Decline or Agree, then select Confirm icon and press [OK].
TV Usage
Select Home Mode(which appears by default).
NOTE
• Store Mode should only be selected by Retailers who plan to demonstrate the TV.
Network
Connection
If your TV does not automatically detect an Ethernet connection, then use a wireless network.
Select your network from the list that displays, input the password. Also you can add a hidden
network.
Select your
primary input
source
Select how you receive your TV channels. Choose from one of the following sources below.
• HDMI
• ANT/CABLE
• AV
• COMPONENT
• NONE
NOTE
• If you use an antenna to receive channels, then you must complete the first-time setup
menu in order to run a channel scan.
14
ENGLISH FRANÇAIS ESPAÑOL
Shortcuts Instructions
You can use shortcuts on the remote control for fast operation.
Turning your TV on or off
To turn your TV on:
1. Connect the power cord to the back of the TV, then plug the power cord into an AC outlet.
2. When the TV is powered on, press the [ ] button on the remote to turn on TV.
To turn your TV off, press the [ ] button on the remote.
NOTES
• When your TV is in standby mode, it is still consuming power. To completely disconnect power, please remove the
plug from the AC outlet.
• If your TV does not receive an input signal for several minutes, it automatically goes into standby mode.
Selecting the input source
Select the Input Source depending on the video device you have connected to your TV.
To select the input source:
1. Turn on your TV, then press the [INPUT] button on the remote, the list of Source appears.
2. Press the D-pad arrows of your remote to select the input source.
3. Press the [OK] button to confirm your selection.
Using the Live TV
To view broadcast programs, press the [TV] button on your remote.
Channel search guide
When you select ANT/CABLE as input, if no TV channels were saved before, you will be prompted to do a channel
search. You can also go to Setting menu > Channel to change the channel settings.
Launch Live TV
After channel tuning is done for the first time, the screen will display Live TV operating tips, including: how to load the
channel list, how to Load info Bar and so on.
[Menu] Load more functions
[OK] Load Channel List
[ v ] Load Info Bar
[BACK] Load previous channel
15
ENGLISH FRANÇAIS ESPAÑOL
Viewing channel information
As you use the [CH+ / CH-] button on your remote to scroll through channels, an information banner appears on the top
of the screen.
The information banner displays the following information:
1. Channel number
2. Lock status
3. Input
4. Program name
5. Show identification
6. Channel name
7. Current date and time
8. Beginning and end time of the next program
9. Start/Stop time progress bar of the current program
10. Prompt
If you are watching a particular channel, you can also press the up arrow button of your remote to view channel
information.
Viewing a channel list
After you have done an automatic channel scan (if you’re using an antenna) or are receiving your channels through a
cable provider, you can view your list of channels by pressing [OK] on your remote.
You will see the channel list display on the right side of the screen.
Creating a Favorites List
To quickly access your most-watched channels, you can create a Favorites List.
To create your Favorites List:
1. Press the [ ] button on your remote.
2. Press the [ v ] button to select Settings, and then press [OK] button to enter the Settings menu.
3. Select Channel > Favorites List.
4. Using the [
v
/ v ] buttons of your remote, select a channel and press [OK] button.
A heart-shaped indicator will appear beside the channel as confirmation that it has been successfully added.
Viewing your Favorite list
To view channels that you’ve added to your Favorites List simply press [OK] on your remote to call out the channel list.
The channel list appears on the right side of the screen and heart-shaped icons are shown next to the channels that
make up your Favorites List. You can press [ < / > ] buttons to switch the channel list (Antenna or Cable) , Favorite and
History list.
6-30-2004 10:10 PM
Antenna │ CC │TV-Y │DTV │ 16:9 │ 1080i
│ │ Unknown 5.1CH
7-1 1:00 AM - 7-1 4:00 AM AT06 1080i
AT05 1080i
6-30 10:00 PM 7-1 1:00 AM
1
6
7
2 3 4 5
8 9
AT05-2
5-2
10
16
ENGLISH FRANÇAIS ESPAÑOL
Using the Menu Function
To quickly access menu function, press the [ ] button on your remote.
Accessibility
You can set Menu Audio, Video Description and High Contrast Menu on or off. The function can be used to meet the
needs of visually impaired people.
When the Menu Audio is set on, the contents of each menu display can be broadcast out.
When the Video Description is set on, you can hear the introduction of relevant programs.
When the High Contrast Menu is set on, the comparison of menu items is more vivid.
Number Pad
You can press digital keys on the left of the screen, to get the relevant channels easily.
Picture Mode
If you’d like to configure the settings for your picture, then there are seven types of picture modes available: Vivid,
Standard, Energy Saving, Movie, Game, Sport and Calibrated.
Sound Mode
Select a preset sound mode to suit the type of content you are listening to: Standard, Theater, Music, Speech and
Late Night.
Aspect Ratio
Adjust the Aspect Ratio to stretch or zoom in on your picture. You can choose from the following settings: Auto,
Normal, Zoom, Wide, Direct, Dot-By-Dot, Panoramic or Cinema.
CC
You can switch between CC Off, CC On and CC On When Mute.
Audio Language(MTS)
You can choose the audio language in DTV mode and you can set MTS for Mono, Stereo or SAP in ATV mode.
Audio Only
When you select this option, the screen will not display the picture. You can only listen the audio. Press any button
except the [ ] button, Volume [+/-] buttons and [ ] button to restore operation.
Settings
The Settings Menu consists of the following settings: Picture, Sound, Network, Channel, Accessibility, System and
Support.
17
ENGLISH FRANÇAIS ESPAÑOL
Basic Settings
Your TV comes with many TV setting features to allow you to customize the picture based on your viewing preference
and environment. As you navigate throughout different screens to access settings, some of the indicators appear as
words On and Off.
Using the Settings Menu
You can press the [ ] button to access the Menu, press the [ v ] button on the D-pad to select Settings, and then
press [OK] button to enter the Settings Menu.
The Settings Menu consists of the following settings:
• Picture
• Sound
• Network
• Channel
• Accessibility
• System
• Support
In each menu, you can:
Press the [
v
/ v ] buttons to select an item.
Press the [OK] buttons to enter the sub-menu or to set on or off.
Press the [ < / > ] buttons to adjust the value.
Press the [BACK] button to return to the previous menu.
Press the [EXIT] button to exit the menu.
18
ENGLISH FRANÇAIS ESPAÑOL
Picture Menu
Backlight: Some models have a Dynamic Backlight Control
setting that you can turn Off and set to High,Middle or Low. The
Backlight Level setting enables you to adjust how bright you want
images to appear, lower settings create darker images. In addition,
an Automatic Light Sensor setting is available that will enable
the TV to automatically adjust the picture settings according to the
amount of ambient light in your room. The Minimum Backlight
setting enables you to adjust the lower point of the dynamic
backlight adjustment scope. This is a money-saving feature
because it reduces power consumption.
Picture Mode: If you’d like to configure the settings for your picture, then there are seven types of picture modes
available: Vivid, Standard, Energy Saving, Movie, Game, Sport and Calibrated.
Once you choose the mode, you can adjust the picture based on the following settings:
Contrast: Adjust the Contrast level to increase or decrease how bright images appear.
Brightness: Adjust the Brightness level to generate lighter or darker images.
Color: Adjust the color intensity of the picture for a more vibrant image.
Tint: Adjust the colors from a green to magenta tint to view the natural skin tones of people on the screen.
Sharpness: Adjust how sharp or soft edges of images appear.
Aspect Ratio: Adjust the Aspect Ratio to stretch or zoom in on your picture. You can choose from the following
settings: Auto, Normal, Zoom, Wide, Direct, Dot-By-Dot, Panoramic or Cinema.
Advanced Picture Options: Adjust advanced picture settings based on your viewing preference.
• Overscan: Change the video size settings to slightly crop the edges of the displayed image.
• Color Temperature: Select a preset color temperature. Adjust how warm(red) or cool(blue) the white areas of an
image appears.
• Motion Enhancement: This setting minimizes afterimages that are left on the screen when viewing fast-moving
objects. You can adjust it from Smooth, Clear, or Off. A Smooth setting will produce a smoother picture whereas a
Clear setting will result in a picture that has less judder (shaking).
NOTE
• Some models don’t support this function.
• Digital Noise Reduction: Improve how clear the picture appears by reducing noise.
• HDMI Dynamic Range: Adjust the HDMI signal range to be more suitable for the content.
• Active Contrast: Automatically darken dark areas and lighten light areas of images to see more details.
Expert Settings:
• Color Tuner: Adjust the Hue, Saturation and Brightness of color settings.
• White Balance: Adjust the intensity of red, green and blue lights to view the true colors of all images in the
picture.
• RGB Only Mode: View images based on default settings or choose the color red,blue or green.
Apply Picture Settings: Adjust current picture mode to apply to all sources or just current source.
Reset Picture Settings: Reset all the picture settings in the current picture mode to the factory default values.
Backlight
• Contrast: 50
Picture
Set the overall brightness of the
screen.
• Brightness: 50
• Color: 55
• Tint: 0
• Sharpness: 10
Aspect Ratio: wide
Advanced Picture Options
Picture Mode: Energy Saving
19
ENGLISH FRANÇAIS ESPAÑOL
Sound Menu
Sound Mode: Select a preset sound mode to suit the type of
content you are listening to: Standard, Theater, Music, Speech
and Late Night.
Set the sound effects to suit your preference.
Configure your audio settings for your sound preferences. Once you
choose the mode, you can adjust the audio based on the following
settings:
Total Sonics: Optimizes overall sound quality by
increasing bass, making dialog clear and natural, and widening
the sound field.
Total Surround: Provides surround sound experience with psychoacoustic processing to place
sounds beside, behind, and above the viewer. For best results use with Total Sonics.
Total Volume: Maintains consistent loudness levels from wide dynamic range programs, too-loud
commercials, and channel or input changes.
Wall Mount setup: Automatically optimize the sound based on the position of the TV.
Advanced Audio Settings: Tune the audio settings and quality of the TV.
• Balance: Adjust the left and right speaker strength to optimize audio for a specific location.
• TV Speaker: Disable the TV speaker when you are using a sound bar, ARC or any other external audio amplifier.
• Digital Audio Out: Select the digital audio output format that best suits the audio device type. For example,
choose RAW (which is uncompressed audio in RAW form) if you have 5.1 Channel Surround Sound Speaker set
up. Choose PCM if you have an amplifier that does not support Dolby Digital technology.
• Digital Audio Delay: Adjust the digital audio output delay time to sync sound from an external speaker with the
images on the TV.
• Lip Sync: Synchronize the displayed image with the audio output.
• Equalizer: Boost the volume at different frequencies.
• Preferred Audio Language: Set the default audio output language for the type of digital broadcast content that
you’re viewing.
• Audio Out: Change the way audio is sent through the type of device that’s connected to your TV Audio Out port.
Reset Default Audio Settings: Reset all of the audio settings in current audio mode to the factory default values.
Sound Mode: Standard
w
y
x O
Wall Mount Setup
Advanced Audio Settings
Reset Default Audio Settings
Sound
Select a preset sound mode to suit
the type of content you are
listening to.
20
ENGLISH FRANÇAIS ESPAÑOL
Network Menu
Network Configuration: Set up the network to gain full access of
Smart TV features.
When the Connection Type is Ethernet, means you choose a wired
network connection to access the Internet.
• IP Settings: Configure the IP setting for your network connection.
When the Connection Type is Wireless, means you choose a
wireless network connection to access the Internet.
• Refresh: Refresh wireless network.
• Add: You can add wireless network.
• Advanced Settings: Configure the advanced wireless network settings for the TV.
Connection Test: Start a network connection test.
Network Information: View information about your network connection.
Wake on Wireless Network: Using a wireless connection,turn on your TV with a screen-cast feature inside an app.
Wake on LAN: Using an Ethernet connection,turn on your TV with a screen cast feature inside an app.
Channel Menu
Tuner Mode: Select if you receive TV channels over the air
(antenna) or through a cable set top box.
Auto Channel Scan: Automatically scan for channels to view
programming from your TV source.
Manual Scan: Type in a channel to add it manually to your TV.
Channel Skip: Skip a channel that your TV picked up during a
previous channel scan search.
Favorite List: Quickly access your most-watched channels by
adding them to the Favorite list.
Network Information
Wake on Wireless Network
Wake on LAN
Network Conguration: Connected
Connection Test
Network
Set up the network to gain full
access of Smart TV features.
Channel
Select if you receive TV channels
over the air (antenna) or through a
cable set top box.
Tuner Mode Antenna
Auto Channel Scan
Manual Scan
Channel Skip
Favorite List
21
ENGLISH FRANÇAIS ESPAÑOL
Accessibility
Caption Control: Choose to leave Closed Captioning On or Off.
Menu Audio: Choose to leave the Audio Menu Prompts On or Off.
Menu Audio Settings: Adjust Menu Audio settings to your
preference.
• Volume: Set the Menu Audio volume.
• Language: Set the Menu Audio language.
• Rate: Set the Menu Audio speed.
• Pitch: Set the Menu Audio pitch.
• Focus Menu Audio: Turn down the background volume when
Menu Audio is playing.
Video Description: Choose to leave the Video description feature On or Off.
High Contrast Menu: Choose to leave the high contrast menu On or Off.
Closed Caption Settings: Adjust Closed Captioning settings to your preference.
• Analog Caption: Select an Analog Caption setting from Off, CC1-CC4, Text 1-TEXT4.
CC1-CC4: Closed captioning appears in a small banner across the bottom of the screen. CC1 is usually the
“printed” version of the audio. CC2-CC4 display content are provided by the broadcaster.
Text1-Text4: Closed captioning that covers half or all of the screen. Text1-Text4 display content are provided
by the broadcaster.
Off: To turn off the Analog Caption.
• Digital Caption: Select a Digital Caption setting: Off, CS1-CS6.
• Digital CC Settings: There are two caption styles. One is the Automatic function set as the broadcaster, while
the other is the Custom style where you can adjust the Size, Font, Text Color, Text Opacity, Background Color
etc.
System Menu
Parental Controls: Turn On Parental Controls to block children
from being able to view certain programs. The password is
required to be set when you use this function for the first time. For
more information about Parental Controls, See Parental Controls on
page 23.
Language: Adjust the default Language settings for the TV.
Keyboard Layout: Change TV keyboard layout language.
Location: Choose the location from where you will watch your TV.
Time And Date: Set the current time based on your location.
• Time Zone: Select your time zone.
• Time Format: Set the time to display in a 12 or 24-hour format.
• Daylight Savings: Select whether to apply Daylight Savings Time to the TV.
• Date/Time: Set the Date and Time.
Timer settings: Adjust the timer settings to suit your preference.
• Sleep Timer: Set the sleep timer to automatically turn the TV Off within a specified time: Off, 10 Minutes, 20
Minutes, 30 Minutes, 40 Minutes, 50 Minutes, 60 Minutes, 90 Minutes and 120 Minutes.
• Power On Timer: Set the clock for the time you want the TV to turn On automatically.
• Power Off Timer: Set the clock for the time you want the TV to turn Off automatically.
• Menu Timeout: Set the amount of time that you’d like for the menu to display : 10s, 20s , 30s , 60s or Off.
CEC Function: Configure how to control CEC-enabled devices with your TV remote.
• CEC Control: Allow CEC-enabled devices that are connected to HDMI ports to control the TV.
Closed Caption Settings
Accessibility
Choose to leave Closed
Captioning On or O
Caption Control CC On When Mute
Menu Audio
Menu Audio Settings
Video Description
High Contrast Menu
System
Turn On Parental Controls to block
children from being able to view
certain programs.
Parental Controls
Language English
Keyboard Layout English
Location USA
Time And Date
Timer Settings
22
ENGLISH FRANÇAIS ESPAÑOL
• Device Auto Power Off: Allow CEC-enabled devices to turn off with the TV.
• TV Auto Power On: Allow the TV to turn On with CEC-enabled devices.
• Audio Receiver: Allow the Audio Receiver to send audio over an HDMI cable and back to or from your TV.
• CEC Device Lists: View a list of all CEC-enabled devices.
• Device Connect: Allow connected devices to the HDMI ports to communicate back and forth with the TV.
NOTES
• HDMI cables must be used to connect HDMI CEC-compatible devices to your TV.
• The HDMI CEC feature of the connected device must be turned on.
• If you connect an HDMI device that is not HDMI CEC-compatible, all the HDMI-CEC Control features do not work.
• Depending on the connected HDMI device, the HDMI-CEC Control feature may not work.
HDMI 2.0 Format: Match the connected device output format. Select Enhanced for devices of 4K, 60Hz, 4:4:4:4:2:2
or 4:2:0, 10 bit and above.
TV Name: Choose a name for your TV. The name will be shown to devices that are available for sharing data.
Application Settings: Set settings for apps on your TV.
• Anyview Stream: Share video, music or other content from compatible device on your TV screen.
• Netflix: Remove this TV from your Netflix account. Please contact Netflix if you want to stop being billed for your
service.
• VUDU: Remove this TV from your VUDU account. Please contact VUDU if you want to stop being billed for your
service.
Advanced Settings: Access the Advanced Settings menu.
• Power LED: Set the power indicator light to stay On or Off when standby mode.
• Audio Only: Turn off the screen display to save energy. Press any button except Power to turn the picture back
on.
• Input Labels: Edit the input labels.
• Default Live TV Source: Set up a source as the default source, which is launched with the Live TV button.
• Screensaver: Select to show an active screensaver when the TV is idle.
• Notifications: Allow pop-up notifications to appear for useful information and events that occur with your TV.
• Send Diagnostics and Usage: Send TV running errors and usage statistics to the server to improve service
quality (No personal information is collected).
• Use Mode: Set the TV to use in Home or Store Mode (Some models have a Store Mode with 4K Video).
Setup Wizard: Use the Setup Wizard for instructions to help you set up your TV.
Support Menu
About: View system information.
Disclaimer: Click to read the Disclaimer details.
Check Firmware Upgrade: Check to ensure that your TV has
received the latest firmware.
Signal Diagnosis: Check diagnostic information for current input
source.
Reset To Default: Reset your TV back to the factory default.
Support
View System information
About
Disclaimer
Check Firmware Upgrade
Signal Diagnosis
Reset To Default
23
ENGLISH FRANÇAIS ESPAÑOL
Parental Controls
The Parental Controls setting allows you to block content that is not appropriate for children to watch. You can do this
by creating a 4-digit password.
Turning Parental Controls On
1. Press the [ ] button on your remote.
2. Press the [ v ] button on the D-pad to select Settings, press [OK] button to enter the Settings menu.
3. Select System > Parental Controls.
4. Press the [OK] button on your remote, a Create PIN window displays. Using the numerical keypad on the window,
create the password.
5. Go to Locks.
6. Press the [OK] button to turn the locks On.
You will see the other Parental Control settings change from a greyed out state and become highlighted. When this
occurs, begin adding other settings to the Block Time, Channel Block, Program Block, Input Block, App Restriction,
Change PIN or Restore Parental Control Defaults features.
Block Time: Block certain channels and programs during certain periods of time.
Channel Block: Block programs by channels when you turn on the Parental Controls feature.
Program Block: Certain programs are blocked when you activate the parental control settings.
Input Block: Block content from devices that are connected to certain TV ports.
App Restriction: Block specific apps when Parental Controls is on.
Change PIN: Change your PIN that you use to access Parental Controls. If you want to change your parental control
password, first enter the new password then enter the same password again.
NOTE
• If you forget your password, call the Consumer Electronics Care Center.
Restore Parental Control Defaults: Reset Parental Controls back to the factory setting.
Description of US TV Ratings
Content Defined as
AAll
DSuggestive dialog
LCoarse or crude language
SSexual situations
VViolence
FV Fantasy Violence
Description of Age-based Ratings
Age Defined as
TV-Y All children
TV-Y7 Directed to older children
TV-G General audience
TV-PG Parental Guidance Suggested
TV-14 Parents strongly cautioned
TV-MA Mature Audiences Only
24
ENGLISH FRANÇAIS ESPAÑOL
US Movie Ratings
Rating Defined as
GGeneral audience
PG Parental Guidance suggested
PG-13 Parents strongly cautioned
RRestricted
NC-17 No one 17 and under permitted
XA rating that has now been superseded by NC-17
Canadian English Ratings
Rating Defined as
CChildren
C8+ Children 8 years and older
GGeneral programming that is suitable for all audiences
PG Parental Guidance
14+ Viewers 14 years and older
18+ Adult Programming
Canadian French Ratings
Rating Defined as
GGeneral (appropriate for all ages and must contain little to no violence or sexual content)
8ans+ General but inadvisable for young children(could contain scenes disturbing to children under eight).
Recommended for viewing with parent.
13ans+ Programming is appropriate for children 13 and older and may contain moderate violence, language
and some sexual situations.
16ans+ Recommended for children 16 and older and may contain strong violence, language and sexual
content.
18ans+ Programming intended for viewers that are 18 and older. Programming may contain extreme violence
and graphic sexual content/pornography.
NOTE
• All ratings that are higher than those you select are also blocked. For example, if you choose to block the PG-13
rating, then the higher ratings (R and NC-17) are automatically blocked too.
Open V-Chip
Turn this On to automatically block programs based on the US rating.
Block Unrated
Block or unblock unrated movies.
25
ENGLISH FRANÇAIS ESPAÑOL
Advanced TV Settings
Getting familiar with the Home screen
The simple design of the Home screen menu makes it easy to navigate. It serves as the central location to access
Notifications, All Apps, LiveTV, All Inputs, Media, Settings and Edit on the back of the TV that you’ve connected
external devices to.
To access the Home screen, press the [] button on your remote control and use the arrows on the D-pad to make
your selection.
Indicators and Icons on the top of the Home screen
You can always view the current time in the top left corner of the Home screen.
If your TV is connected to the Internet through a wireless connection, then an icon will display in the top right corner
of the screen. This location makes it very convenient for you to determine if you still have Internet connectivity as you
use the TV.
Names of sections that appear on the Home screen
The Home screen displays the following section names:
• Notifications
• All Apps
• LiveTV
• All Inputs
• Media
• Settings
• Edit
Notifications
If your TV is connected to an external device, the screen will be prompted.
26
ENGLISH FRANÇAIS ESPAÑOL
All Apps
Numerous factory-installed apps are available for you to choose from for your entertainment preferences.
Installing an App
To install an app from the App Installer:
1. From the Home screen, click on the All Apps to select the App Installer icon.
2. Use the navigation buttons on your remote to select the app that you want to install.
3. Press the [OK] button on your remote.
To install an app from the Opera TV Store:
Even though your TV has numerous factory-installed apps, there may be others that you’d like to download.
1. From the Home screen, click on the All Apps to select the Opera TV Store icon.
2. Navigate to the SEARCH tab.
3. Begin typing the name of the app. As you begin typing the first two to three letters the Opera Store suggests words
to quicken your search time.
4. Use the navigation buttons of your remote to select the app. A page displays that shows a written description of the
app.
5. Click on OPEN or ADD TO FAVORITES.
Removing an App
You can only delete apps that you’ve installed to the TV. Factory-installed apps can not be deleted.
To delete an app:
1. From the All Apps screen, click on the Delete icon.
2. Use the navigation buttons on your remote to select the app that you want to remove.
3. Press the [OK] button on your remote. A dialog message displays that asks if you’re sure you want to remove the
app.
4. Click on Delete. A confirmation message displays and the icon is removed from the Apps list screen.
NOTE
• If an app is deleted,the information related to that app is also removed.
Moving App Icons around
Apps can not be moved around on the screen.
Customizing the name of your TV
If you have several TV’s in your home then you may want to customize the name of your TV. By giving your TV a name, it
will make it easier for you to identify it when connecting devices to the TV to stream or mirror content.
To customize the name of your TV:
1. Press the [ ] button on your remote.
2. Press the [ v ] button on the D-pad to select Settings, press [OK] button to enter the Settings menu.
3. Go to System > TV Name.
4. Select User Input to bring up the keyboard and begin typing the name.
5. When you are finished, power off the TV and power it back on for the change to take effect.
27
ENGLISH FRANÇAIS ESPAÑOL
Media
Media is a central location for you to view or listen to different types of content (for example, your photos, music and
movies) through the following methods:
• A USB thumb drive or hard drive
• Compatible mobile phone, tablet or other personal device: You can stream movies, music and photos that are stored
on Compatible personal device and play or view the content on your TV.
Panels that appear on the Media screen
The Media screen displays four panels: Picture, Video, Music and All.
File formats that may be supported
NOTE
• Due to differences in programming tools and other factors, some of the file formats that are listed may or may not
be supported.
Medium File Format
Video .avi (MPEG2, Divx), .mkv (Divx), .mpeg (MPEG2), .wmv (Divx, XviD)
Picture .JPG
Music .mp3
Browsing Content
To browse through content based on the type that you wish to access:
1. Navigate to the appropriate menu tab in the top right corner of the screen and select Music, Video, Picture or All.
2. Click on the name of the folder that contains your content.
3. Make your selection to play or view the content.
If you want to close out of the Media center, then press the [EXIT] button on your remote.
Viewing Pictures as a Slideshow
To view pictures in a slideshow:
1. Navigate to the Picture tab.
2. Click on start the Slideshow.
The slideshow of your pictures begins to play. To stop the slideshow, press the [OK] button on your remote and press it
again to restart it.
Viewing Video
While viewing video you will see a number of icons appear at the bottom of the screen. You can use the navigation
buttons of your remote to select these icons that will control the video.
Edit
By operating this option, you can edit the home page, add a title, add an input, add an app and add a channel.
Using the [
v
/ v ] buttons of your remote to change or remove it, also you can select Reset to return your operation.
28
ENGLISH FRANÇAIS ESPAÑOL
Using Anyview Cast to mirror content from your device to the TV screen
The Anyview Cast is an app that enables you to share (or cast) a video, audio or image from your Android-based device
to the TV.
From your tablet or phone
To mirror content from your tablet or phone to the TV:
1. Press the [ ] button on your remote, press the [ v ] button on the D-pad to select Settings, press [OK] button to
enter the Settings menu. Go to Network > Network Configuration and select Wireless.
2. Press the [ INPUT ] button on your remote and select the Anyview Cast.
3. Turn on the wireless display function on your Android-based device.
NOTE
• Some Android-based devices may not support casting.
4. Find your TV in the list of devices that displays and select it.
5. Wait for the Creating Connection progress bar to complete on the TV screen and the video or image will display in a
moment.
29
ENGLISH FRANÇAIS ESPAÑOL
Software updates for your TV
The software (also referred to as firmware) is part of what powers your TV. We will provide software updates to
continuously enhance your TV and correct any issues that may impact your user experience; therefore, we recommend
that you keep your TV connected to the Internet to receive updates when they are available.
You can choose to receive updates manually or check for software updates and install them manually.
Checking for the latest firmware
To manually check for the latest firmware:
1. Using your remote, press the [ ] button.
2. Press the [ v ] button on the D-pad to select Settings, press [OK] button to enter the Settings menu.
3. Go to Support > Check Firmware Upgrade.
30
ENGLISH FRANÇAIS ESPAÑOL
Quick Problem-Solving Tips
When you experience an issue with your TV, turn it off and on again. If this does not resolve the problem, then refer to
the tips below. If the problem is still not resolved, then contact us.
ISSUES POSSIBLE SOLUTIONS
No sound or picture
• Check if the power cord is plugged into a powered AC outlet.
• Press the [ ] button on the remote control to activate the unit from ‘Standby’
mode.
• Check to see if the LED light is on or not. If it is, then the TV is receiving power.
I have connected an external
source to my TV and I get no
picture and/or sound
• Check for the correct output connection on the external source and for the
correct input connection on the TV.
• Make sure you have made the correct selection for the input mode for the
incoming signal.
When I turn on my TV, there is a
delay for a few seconds before
the picture appears. Is this
normal?
• Yes, this is normal. The TV is initializing and searching for previous setting
information.
The picture is normal but there is
no sound
• Check the volume settings.
• Check if ‘Mute’ mode is set to On.
Sound but no picture or black
and white picture
• If the picture is black and white, unplug the TV from the AC outlet and replug it
after 60 seconds.
• Check that the Color is set to 50 or higher.
• Try different TV channels.
The sound and/or picture is
distorted or appears wavy
• An electric appliance may be affecting the TV. Turn off any appliances that are
nearby and move it farther away from the TV.
• Insert the power plug of the TV set into another power outlet.
The sound and picture is blurry
or cuts out
• If using an external antenna, check the direction, position and connection of the
antenna.
• Adjust the direction of your antenna or reset or fine tune the channel.
A horizontal or vertical stripe
appears on the picture and/or
the picture is shaking
• Check if there is an appliance or electric tool nearby that is causing
interference.
The plastic cabinet makes a
“clicking” type of sound
• The ‘click’ sound can occur when the temperature of the television changes.
This change causes the television cabinet to expand or contract, which makes
the sound. This is normal and the TV is OK.
The remote control does not
work
• Confirm that TV still has power and is operational.
• Change the batteries in the remote control.
• Check if the batteries are correctly installed.
NOTE
• For usage in Mexico , operation of this equipment is subject to the following two conditions : 1 ) it is possible that
this device doesn’t cause any detrimental interference and 2 ) this device must take any kind of interference,
including that which may cause its malfunctioning.