Hitron TECHNOLOGIES HTDW1 Wireless door/window security sensor User Manual

Hitron TECHNOLOGIES Wireless door/window security sensor 1

a href="https://usermanual.wiki/Hitron-TECHNOLOGIES" itemprop="url"> Hitron TECHNOLOGIES >

Contents

User Manual

HT-DW1 0440010170N0(1A)Hitron's HT-DW1 is a micro door / window sensor, uses a magnetic reed switch to detect when a door, window, cabinet, garage door or any other object is opened.Quick Install Guide / Manual 1. Activate BatterySlide open the sensor’s housing and pull the tab to activate it for pairing. 2. Join the NetworkFollow the instructions on your iControl touchscreen to add a new HT-DW1. During the joining needs to be lower case, the LED on the HT-DW1 will blink while it’s searching for the network.More information about this process can be found at: http://www.hitron-americas.com Unobtrusive Compact Design3+ Year Coin Cell Battery LifeEasy Installation with Tape or ScrewsTamper Switch for Extra Security100m Free Field, 60m+ Inside RangeKey Features ContentsHT-DW1 1 CR-2032 BatteryScrews and Tape (4 each) LED Indicators/ TroubleshootingStatus/Action Description The LED will light green) for 2 seconds when the battery is inserted. (The LED will flash (green) 3 times each time. It will quit flashing when it finds a network.Holding the tamper switch, inserting the battery, and releasing it while the LED is green (within 2 seconds of inserting the battery).Pressing and releasing the tamper switch 5 times within 5 seconds.Start using your HT-DW1 HT-DW1 is ONSearch for networkFactory resetForced rejoinBatteryLEDSensor’s housing Tab Tamper switchMagnet
ScrewOrientation Dimple3. Install the sensor and magnet in a proper orientation4.Close sensor’s housing0.75"(1.9cm) Mounting plateTapeScrew holesWhere not to place(1) Metal can reduce transmission range(2) Damp or very humid areaTest the Sensor from desired location before permanent installation. Position the sensor’s mounting plate beside the door or window frame on the wall and the magnet on the door or window itself by using either double sided tape or screws. They can be a maximum of 0.75” (1.9 cm) apart. If aligned properly, you will be able to hear a 'click' when they approach. When the door/window is opened, contact is broken and the sensor sends a signal to activate the receiver(s). Once you have confirmed the Sensor is communicating, install it in its mounting plate on the door or window frame.
Download:
Mirror Download [FCC.gov]
Document ID2249477
Application IDy9bv56PS7p1i0UDyyJyiag==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize50.29kB (628638 bits)
Date Submitted2014-04-23 00:00:00
Date Available2014-04-23 00:00:00
Creation Date2014-03-14 14:30:19
Producing SoftwareCorel PDF Engine Version 15.2.0.686
Document Lastmod2014-03-14 15:06:28
Document Title無標題-1
Document CreatorCorelDRAW X5
Document Author: Q20吳翊如(Eunice_Wu)
FCC ID Filing: U4P-HTDW1

Navigation menu