Hitron TECHNOLOGIES HTDW1 Wireless door/window security sensor User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	2249477
Application ID	y9bv56PS7p1i0UDyyJyiag==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	50.29kB (628638 bits)
Date Submitted	2014-04-23 00:00:00
Date Available	2014-04-23 00:00:00
Creation Date	2014-03-14 14:30:19
Producing Software	Corel PDF Engine Version 15.2.0.686
Document Lastmod	2014-03-14 15:06:28
Document Title	無標題-1
Document Creator	CorelDRAW X5
Document Author:	Q20吳翊如(Eunice_Wu)

HT-DW1
Sensor’s
housing
LED
Tab
Magnet
Quick Install Guide / Manual
Hitron's HT-DW1 is a micro door / window sensor,
uses a magnetic reed switch to detect when a
door, window, cabinet, garage door or any other
object is opened.
Tamper
switch
Battery
Key Features
Unobtrusive Compact Design
3+ Year Coin Cell Battery Life
Easy Installation with Tape or
Screws
Contents
HT-DW1
1 CR-2032 Battery
Screws and Tape (4 each)
Tamper Switch for Extra Security
Start using your HT-DW1
1. Activate Battery
Slide open the sensor’s housing and
pull the tab to activate it for pairing.
2. Join the Network
Follow the instructions on your iControl
touchscreen to add a new HT-DW1.
During the joining needs to be lower
case, the LED on the HT-DW1 will blink
while it’s searching for the network.
More information about this process can be
found at: http://www.hitron-americas.com
100m Free Field, 60m+ Inside
Range
LED Indicators/ Troubleshooting
Status/Action
Description
HT-DW1 is ON
The LED will light (green) for 2 seconds when the
battery is inserted.
Search for network
The LED will flash (green) 3 times each time. It will
quit flashing when it finds a network.
Factory reset
Holding the tamper switch, inserting the battery,
and releasing it while the LED is green (within 2
seconds of inserting the battery).
Forced rejoin
Pressing and releasing the tamper switch 5 times
within 5 seconds.
0440010170N0(1A)
Orientation
Dimple
0.75"(1.9cm)
Screw
Screw holes
Tape
Mounting plate
3. Install the sensor and magnet in a proper orientation
Test the Sensor from desired location before permanent
installation. Position the sensor’s mounting plate beside
the door or window frame on the wall and the magnet on
the door or window itself by using either double sided tape
or screws. They can be a maximum of 0.75” (1.9 cm) apart.
If aligned properly, you will be able to hear a 'click' when
they approach. When the door/window is opened, contact
is broken and the sensor sends a signal to activate the receiver(s).
4.Close sensor’s housing
Once you have confirmed the Sensor is
communicating, install it in its mounting
plate on the door or window frame.
Where not to place
(1) Metal can reduce transmission range
(2) Damp or very humid area

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Q20吳翊如(Eunice_Wu)
Create Date                     : 2014:03:14 14:30:19+08:00
Modify Date                     : 2014:03:14 15:06:28+08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Creator                         : Q20吳翊如(Eunice_Wu)
Title                           : 無標題-1
Creator Tool                    : CorelDRAW X5
Metadata Date                   : 2014:03:14 15:06:28+08:00
Producer                        : Corel PDF Engine Version 15.2.0.686
Document ID                     : uuid:2f381558-1556-4a0a-b821-83d7bc0db3b8
Instance ID                     : uuid:e82341f4-34be-4616-92e7-20bcc16e4aca
Page Count                      : 2
Profile CMM Type                : Lino
Profile Version                 : 2.1.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : XYZ
Profile Date Time               : 1998:02:09 06:49:00
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : IEC
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.9642 1 0.82491
Profile Creator                 : HP
Profile ID                      : 0
Profile Copyright               : Copyright (c) 1998 Hewlett-Packard Company
Profile Description             : sRGB IEC61966-2.1
Media White Point               : 0.95045 1 1.08905
Media Black Point               : 0 0 0
Red Matrix Column               : 0.43607 0.22249 0.01392
Green Matrix Column             : 0.38515 0.71687 0.09708
Blue Matrix Column              : 0.14307 0.06061 0.7141
Device Mfg Desc                 : IEC http://www.iec.ch
Device Model Desc               : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc               : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant         : 19.6445 20.3718 16.8089
Viewing Cond Surround           : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type    : D50
Luminance                       : 76.03647 80 87.12462
Measurement Observer            : CIE 1931
Measurement Backing             : 0 0 0
Measurement Geometry            : Unknown
Measurement Flare               : 0.999%
Measurement Illuminant          : D65
Technology                      : Cathode Ray Tube Display
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)

EXIF Metadata provided by EXIF.tools