Hitron TECHNOLOGIES CGNV22 DOCSIS 3.0 eMTA User Manual

Hitron Technologies Inc. DOCSIS 3.0 eMTA

User Manual

QUICK START GUIDECGNV22Connect to the networkConnect your phoneSet up your Wireless networkRead mefirst!1STEPCheck the box contentsLook in the box and make sure you have the following:2STEPConnect the cable portConnect your cable outlet to the device’s CABLE connector.3STEPConnect the powerConnect the power adtaptor to the POWER port.6STEPConnect wireless devicesTo connect you device to the wireless network.Look at the sticker at the bottom of the device, and make a note of the SSID and Wireless PassPhrase, If you are using a smart phone or tablet you could scan the QR code on the "WiFi" label. This will help you to obtain the "WiFi" information quickly.4STEPConnect your phone to the LINE portUse the cable to connect your phone to the LINE port.Wait for dial tone before using it.5STEPConnect your computer to the deviceYou can use the included Ethernet cable to connect a computer to one of the LAN ports.For both cases, look at the LEDs ( ) on the front of the device. If the light is on or blinking, then WiFi is on.QUICK START GUIDEHITRON CGNV22ETHERNET CABLEPOWER ADAPTERSSID-2.4G: MOVISTAR_XXYYSeguridad: WPA2-PSKContraseña: WWWWWWWWWWWWWWWWWWWWCM RF MAC: A1234567890BeMTA MAC: 1234567890ABWAN MAC: 0987654321ABWiFiOn your computer open the Wireless network connections and choose the SSID of the Device you want to connect.On the next window enter the PassPhrase on your device label and press the Connect botton. Once connected, please verify if your computer is Connected to your Device’s SSID.If not,turn the Wireless network on by pressing the WPS button of the device for more the 5 seconds.If you want to use WPS function, press the WiFi/WPS botton for 1~ 5 seconds.
Advertencias de seguridad Connection options0440010246N0(1A)Wireless Devices PhoneComputersCablePower AdapterWARNINGRisk of electrical shock. Do not expose the device to water or moisture. The device is a high-performance communications device designed for home and office environments. Do not use the device outdoors.Keep the device in an environment between 0°C ~ 40°C (32°F ~104°F). To avoid overheating, do NOT place any object on top of the device.Do not restrict the flow of air around the device. The manufacturer assumes no liabilities for damage caused by any improper use of the device.DISCLAIMERThe manufacturer assumes no liabilities with respect to the contents of this document. The manufacturer also reserves the right to revise this document or update the content there of without any obligation to notify any person of such revisions or amendments. Specifications subject to change without notice.CAUTIONThe cable distribution system should be grounded (earthed) in a accordance with ANS/NFPA 70, the National Electrical Code (NEC), in particular Section 820.93, Grounding of Outer Conductive Shield of a Coaxial Cable. Federal Communication Commission Interference StatementThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.FOR MOBILE DEVICE USAGE (>20cm/low power)Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. FOR COUNTRY CODE SELECTION USAGE (WLAN DEVICES)Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only.COPYRIGHT © 2016 HITRON TECHNOLOGIES, INC.Visualización de las luces LEDPOWERDOWNSTREAMUPSTREAMLANINTERNET2.4G WiFi/WPSTELÉFONOGreen steadyGreen blinking (2Hz) Green blinking (4Hz)OffGreed SteadyGreen Blinking Blue Steady OffEl dispositivo está alimentado de corriente eléctrica.HW initialization.Fail during POST (Power on self-Test) or error cause by HW or SW.No powered.Downstream frequency locked (One Channel Only).The Cable Modem is searching for a Downstream frequency.Downstream frequency locked (Channel Bonding).Not scanning.Greed SteadyGreen Blinking Blue Steady OffUpstream frequency locked (One Channel Only).The Cable Modem is searching for a Uptream frequency.Upstream frequency locked (Channel Bonding).Not scanning.Green SteadyOffGateway is operational (Online).Gateway is offline.Green SteadyOff One of the LAN porst is connected as 10/100/1000 Mbps.No connected devices to LAN port.Green SteadyGreen Blinking (2Hz)Red Steady(During10 seconds)Off2.4 Ghz WiFi is ONWPS function is active and locking a Wireless client device to be paired.Problem with WPS registration.WiFi if disable by customer.Green SteadyGreen Blinking (1 Hz) Green Blinking (4 Hz) Green Blinking (4 Hz)3 vecesOffPhone Line is registerd and ready to make and recive callsPhone is off-hook or in use.New voice mail3 quick blinks (4 Hz) followed by 3 seconds OFF means the Line is configured but the VoIP interface does not have IP. VoIP configuration error and the ATA is not register to the NGN/SIP.SIP clients has no active registration and the line is not active or it is not being able to register.

Navigation menu