Hologic PCB01673 RFID Board (PCB-01673) User Manual

Hologic Inc RFID Board (PCB-01673) Name

a href="https://usermanual.wiki/Hologic" itemprop="url"> Hologic >

RFID Board Instructions.pdf

 RFID Board Instructions for FCC & IC Filing    Form ENG-0013-T01, Rev. 002  Hologic Inc. currently manufactures an RFID interface board that is used to detect the breast compression paddle in Hologic mammography equipment. RFID board as a module is installed in the COMPRESSION DEVICE assembly. Corresponding tag is located in the breast compression paddle as seen below.
 RFID Board Instructions for FCC & IC Filing    Form ENG-0013-T01, Rev. 002 The circuit board contains a microcontroller to simulate I2C functionality, an I2C based A/D converter, an integrated PCB printed antenna, and additional supporting circuitry. The board interfaces with the rest of the system through a single 4-pin header consisting of power, ground and I2C bus. Compression Device Assembly is performed per assembly procedure AP-03659. RFID board in addressed in step 2.16 through 2.18 2.16  Attach completed VCD display to top of the load cell using (3) 6-32 x 5/8” Pan Head Phillips SEMS (2-500-9772). Attach ‘DJ4’ of RFID Board assembly (PCB-01673) to the interface board (PCB-00095).  Shift the paddle assembly fully to the left, tie wrap (1-090-0179) the RFID cable to the frame and return the paddle assembly to the center.                           RFID Board Goes Here  2.17  Attach Shifting Breast Tray Harness (CBL-00672) to ‘EJ1’ of the paddle position sensor board (PCB-00186) and ‘DJ9’ of the compression device interface board (PCB-00095). Tie wrap (1-090-0179) to frame. 2.18  Attach the MOTOR ASSY/CONNECTOR (MEL-00225) to ASSY.,COMP. DEVICE INTERFACE BD (PCB-00095). Connect “DJ1” load cell cable to ASSY.,COMP. DEVICE INTERFACE BD (PCB-00095).  See wire routing photos below for detail on how to properly dress the wire to ensure the compression device helmet can be properly mounted later.
Download:
Mirror Download [FCC.gov]
Document ID3932496
Application IDaR1Gq4EiMhl9fnXh0RUuqw==
Document DescriptionRFID Board Instructions.pdf
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize25.04kB (313007 bits)
Date Submitted2018-07-20 00:00:00
Date Available2018-07-20 00:00:00
Creation Date2018-06-21 15:50:22
Producing SoftwareMicrosoft® Word 2010
Document Lastmod2018-06-21 15:50:22
Document TitleName
Document CreatorMicrosoft® Word 2010
Document Author: Hologic User
FCC ID Filing: YUJ-PCB01673

Navigation menu