Hyundai IBT PT42DA000 PDP TV User Manual 1 7 Appen eng

Download:
Mirror Download [FCC.gov]
Document ID	634121
Application ID	LbB9ndqa0sZJOGumXZJufg==
Document Description	Users Manual 1a
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	286.78kB (3584788 bits)
Date Submitted	2006-03-07 00:00:00
Date Available	2006-03-07 00:00:00
Creation Date	2006-03-07 11:02:38
Producing Software	Acrobat Distiller 5.0.5 for Macintosh
Document Lastmod	2006-03-07 11:03:01
Document Title	1_7_Appen_eng
Document Creator	QuarkXPress 3.3K: LaserWriter 8 KH-8.7.1
Document Author:	......

U ser's Gu ide
USA
AVC Tech
777 Mark St., Wood Dale, IL 60191
Tel : 800-568-0060 or 630-595-0123
Fax : 800-784-9422 or 630-595-2345
e-mail : service@hyundaimonitor.com
NEW ZEALAND
TRANSTECH DISTRIBUTORS Ltd.
PO Box 12985 Penrose,
Auckland New Zealand
Tel : 09-571-0775
Fax : 09-571-0776
e-mail : LouisG@Transtech.co.nz
WWW : www.transtech.co.nz
AUSTRALIA
Thomas Electronics Australia Pty Ltd.
3 Sheridan Close
Milperra NSW 2214, Australia
Tel : +61 2 9773 7400
Fax : 61 2 9773 7177
Attn : Ms. Shiely Poniman
GERMANY
Hyundai ImageQuest Europe GmbH
Geheimrat Hummel Platz 2
65239, Hochheim, Germany
Tel : 06146 / 904 444
Fax : 06146 / 904 410
e-mail : service@hyundaiq.de
WWW : www.hyundaiq.com
JAPAN
Hyundai ImageQuest JAPAN
Shin-Hibiya Bldg, East 5F 1-3-6
Uchisaiwai-Cho, Chiyoda-ku,
Tokyo, Japan 100-0011
Tel : 03-5157-2286
Fax : 03-5157-2284
e-mail : pjkim@iqt.co.kr
C/S P.J.Kim
P/N 632 0239 601 Rev.00
Table of Contents
Important Tip/Image Sticking Precaution ...............................1
Safety Precaution .................................................................2
Contents of the Package .......................................................6
Products Sold Separately ......................................................6
How to Mount and Detach The Speakers (26”/32” LCD TV) ...7
How to adjust the view angle (26”/32” LCD TV) ....................8
Kensington Lock Anti-theft Device (26”/32”/40” LCD TV).......8
How To Install Desktop Stand (42”/50” PDP TV) ....................9
How To Use Speakers (42”/50” PDP TV) .............................10
Parts Names and Functions (26”/32” LCD TV) ....................12
Parts Names and Functions (40” LCD TV) ...........................14
Parts Names and Functions (42”/50” PDP TV) ....................16
Remote Control ...................................................................18
Connections
Connecting Indoor/Outdoor TV Antenna(UHF/VHF) ...............20
Connecting Antenna Input Connection to
External Equipments ...........................................................20
Before Connecting the Video/Audio Connections to
External Devices... .............................................................21
How to Connect a DTV Receiver or DVD Player ....................21
How to Connect a VCR, Cable Receiver, Camcoder,
Game Player .......................................................................22
How to Connect to a PC ......................................................22
Scart Connection to the External Input/Output .....................23
HDMI Connection (For HDMI model only) ............................24
How to Set the OSD Screen ................................................25
Picture Setup
How to Select the Picture Mode ..........................................26
How to Set the Desired Picture ...........................................26
How to Set the Desired Picture in PC, DVI,
HDMI Input Modes ..............................................................27
How to Select a Color Temperature .....................................27
How to Set the Display Scale ..............................................28
How to Set Noise Reduction ................................................28
How to Set Film Mode .........................................................29
How to Set Image Adjust in PC Mode ..................................29
How to Select S. Mode ........................................................31
How to Select TruSurround XT ............................................32
How to Set the Output of Subwoofer ...................................32
How to Select Earphone ......................................................33
Channel Setup
Automatic Program Searching ............................................34
Manual Program Searching .................................................34
How to Set the Program Edit ...............................................35
Using the LNA(Low-Noise-Amplifier) Feature ......................36
Function Setup
How to Set PIP/TWIN ...........................................................36
How to Set Key-Lock ..........................................................37
Using the Pixel Shift / Full White (Only for the PDP model) ...38
Choosing the Your Languages .............................................39
How to Set Teletext in ATV .................................................39
Selecting Teletext Display Options in ATV Mode ..................40
How to Set Clock, Sleep Time, ON/OFF Time .......................41
DTV Setup
How to Search Automatically ..............................................42
How to Search Manually .....................................................42
How to Check Tuner State ..................................................43
How to Use the Guide (EPG : Electronic Program Guide) ......44
How to Select Channel List .................................................45
How to Set Favorite Channel ...............................................45
How to Use Channel List Mode ...........................................46
How to Lock Channel ..........................................................46
How to Set the Channel Order .............................................47
How to Delete Channel .......................................................47
How to Add Channel ...........................................................48
How to Factory Set .............................................................48
How to TV/RADIO switching ................................................49
How to Subtitle / Audio .......................................................49
How to Select Channel / Information ...................................50
How to Set Teletext in DTV .................................................50
How to Use Memory Mode .............................51
Sound Setup
Appendix
How to Select the Audio Mode ............................................30
How to Adjust the Desired Audio Mode ..............................30
How to Select AVL ..............................................................31
How to Use an External Device Using the Remote Control ...59
Troubleshooting ..................................................................61
Product Specifications ........................................................63
ENGLISH
General Information
General Information
Important Tip
ENGLISH
Image Retention Effect (Image Sticking)
1. Cause :
- Image Retention Effect may come from displaying a still picture in a certain period of time with at a certain
area continuously, as feature of Panel. This is caused due to brightness degradation. Many Panel
manufacturers are trying to overcome this limitation.
2. Prevention
- To avoid this matter, use the product after reducing brightness and contrast, especially when a still image is
displayed for a long time.
Once an image retention occurs, use the mode that displays motion. It will reduce this matter.
- Use the fuction, Pixel Shift in still image, in our PDP products. (For more details, see the below page 38)
3. Solution
- The temporary image sticking would decrease with displaying Full-White pattern during 10 hours.
* The permanent image sticking could not take off under the latest technology.
This method may be used to eliminate a temporary retained image that occurs after displaying a still image in a
certain period of time. Since it may take several minutes to several hours to remove image sticking, it is
recommendable to display motion pictures during 2~3 minutes every hour when keeping displaying a still
image. As image sticking is influenced by the brightness of a still image being displayed and its display time, it
is recommended to reduce the brightness of the screen.
* Image Sticking does not come under the warranty.
Image Sticking Precaution
When watching a still Image within motion pictures and Wide/Zoom1/Zoom2
/14:9/4:3 screen
Wide,Zoom1, Zoom2, 14:9, 4:3
screen
Box still image
1. Note :
- When the central area of the screen and the screen edges are fixed, the different brightness level of
the edges may cause image retentions on the edges when watching for a long time
- This phenomenon happens also to products from other manufacturers. Please avoid to watch a still
image for a long time.
- If you watch a still image for a long time, this may damage your TV.
* This matter does not come under the warranty.
General Information
Safety Precaution
The contents of this section are provided for the safety of users and their property.
Please read the instructions carefully before using.
ENGLISH
Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the TV, be sure the antenna or
cable system is grounded so as to provide some protection against voltage surges
and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA
No.70-1984, provides information about proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna discharge unit, connection to grounding
electrodes, and requirements for the grounding electrode.
Example of Grounding According to National Electrical Code
Instruction
Do not connect multiple electrical
appliances to a single outlet.
- It may cause a fire due to overheating from
the outlet.
Make sure to remove the speakers
before moving the TV with speakers
mounted on it.
- When the speakers are detached from the
unit while carrying it, this may cause damage
to the unit or personal injury.
Do not use or store a flammable
spray or inflammable things near the
TV.
- They may cause explosion or fire.
Do not install the TV in a
bookshelf, closet, or a place with
poor air circulation.
- Fire may be caused due to the rise of
internal temperature.
Any necessary action such as making the
antenna cable loop at the entrance of the
building should be taken to prevent rainwater
on the outdoor antenna cable from possibly
running indoor.
- If raindrop gets into the TV, it may cause a
fire or an electric shock.
General Information
Safety Precaution ......................................................................................Continued from previous page
ENGLISH
The contents of this section are provided for the safety of users and their property.
Please read the instructions carefully before using.
If there is a persistent accumulation
of dusts or water on the plug, please
make sure to wipe it off using a dry
cloth.
Do not use a damaged power cord
or plug, or loose outlet.
- It may cause electric shock or fire.
- It may cause a fire or an electric shock.
Firmly plug in the power cord so that
it does not pull out.
- An unstable connection may cause fire.
Do not install in a place where there
is oil, smoke, excessive humidity, or
where water may be sprinkled on it.
- This may cause electric shock or fire.
Do not put a water bowl, vase,
candle, bug repellant smoke,
cigarette, plants, or heavy thing on
the TV.
Do not install on an unstable place
or small support.
- It may cause electric shock or fire and also
heavy things may cause injury when they
fall.
- This may cause the TV to fall, resulting in
serious injury especially to children.
Never attempt to open, fix, or modify
your TV.
When the TV produces abnormal noise,
burning smell, or smoke, unplug the TV
immediately and call a service center.
- When there is a need for fixing, call a
service center. Fire or electric shock may be
caused.
- Electric shock or fire may be caused.
Do not put a metallic object like chopstick,
wire, or puncher or inflammables like paper
or a match in a vent, headphone jack, or AV
jacks of the TV.
- Electric shock or fire may be caused.
General Information
ENGLISH
In connection with the selling of batteries or rechargeable batteries or with the supply of devices which contain batteries or rechargeable batteries, we are
required, according to the recycling regulations, to inform you the procedures.
Batteries may not be binned to the household waste. You are legally required, as final consumer, to return used batteries or rechargeable batteries. You
can return used batteries or used rechargeable batteries free of charge to retailers or in your proximity (as local collecting points or in the trade). You may
also send them back to us by mail. Batteries or rechargeable batteries, which contain pollutants, are marked by the symbol of a crossed waste bin. Beside
the waste bin symbol are the chemical designations for pollutants; Cd stands for cadmium, Pb for lead and Hg for mercury.
Do not block ventilating slits with a table
cloth.
- Blocking the ventilation slits may produce
internal heat increase, resulting in a fire.
Please avoid touching the panel at the rear of
TV as it is producing high temperature.
- Direct contact with the hot surface may
cause physical burns.
Do not place any heat sources such as
radiators and heat registers, etc. near the TV.
- It may cause a fire.
Do not place toys and cookies, etc. on the TV,
which may attract children’s attention.
- This may cause the TV to fall, resulting in
serious injury.
When cleaning the TV, make sure to
disconnect the power plug and use a dry, soft
cloth for a cleanup.
Do not allow children to climb or play on the
TV.
- Please avoid using chemicals such as wax,
benzene, alcohol, thinner, mosquito spray,
air freshener, lubricant or synthetic
detergent.
- This may cause the TV to fall resulting in
serious injury.
Unplug when you do not use your TV for a
long time.
Never touch the power plug or outlet with
wet hands.
- If dust is stacked on the TV, electric shock
or fire may be caused from heat, fire, or
deterioration of insulation.
- This may cause electric shock.
When moving the TV, two or more people are
advised to carry it.
- This may cause damage to the unit or
personal injury.
General Information
Safety Precaution ......................................................................................Continued from previous page
ENGLISH
The contents of this section are provided for the safety of users and their property.
Please read the instructions carefully before using.
Unplug the product during lightning or
thunderstorms and never touch the antenna
cable.
- It may cause a fire or an electric shock.
Do not install the product on the floor.
Keep the remote control batteries out of
sight and out reach of children.
- This may cause the TV to fall resulting in
serious injury.
- If your child swallows a battery, see your
doctor immediately.
When replacing batteries, make sure to
match the batteries to the (+) and (-) marks
in the battery compartment.
- Mismatching of polarities may result in
internal damage to batteries, fire due to
leakage or contamination.
Always use the standard batteries and avoid
using old batteries together with new ones.
- Otherwise it may result in internal damage
to batteries, fire due to leakage or
contamination.
In the event of damaging or dropping the
product, switch off the power and remove
the plug.
- Using a damaged product may cause an
electric shock or a fire.
- Contact your local service center.
Consult a service center or customer service
for inside cleaning about once a year.
- When dust is piled inside the TV for a long
time, fire or malfunction may be caused.
Before moving the product, ensure to switch
off the power and unplug all the electrical
cords and the external connection cords such
as an antenna cable and other source
connections, etc.
- Electrical cords may be damaged, resulting in
a fire or an electrical shock.
Ensure the power cord doesn’t trail
across any hot objects like a heater.
- This may cause a fire or an electric shock.
General Information
Contents of the Package
When opening the package, please ensure to check the following accessories.
ENGLISH
Antenna Cable
(coaxial cable)
Power Cord
Remote Control &
2 batteries (1.5V AAA)
User's Guide
Products Sold Separately
If you want to purchase the following accessories, consult a service center, electronics shops, or parts seller.
DVI PC video(digital) cable
Component(Y, Pb, Pr) cable
Composite(Video & Audio) cable
S-video cable
Desk type stand
PC signal cable
Desk type speaker Desk type speaker
stand
Wall mounting frame
Scart cable
Ceil mounting frame
Adjustable wall mounting frame
General Information
How to Mount and Detach The Speakers - 26”/32” LCD TV
You can attach the speakers to the base of the unit or use them separately.
ENGLISH
How to mount the speakers onto the base of the unit
1. Tilt the unit backward until its base faces yourself (See next page “How to Adjust the View Angle”).
2. Prepare your right speaker first. Remove the tube of the hooks and verify that the hooks are placed in the
upright position.
3. Align the right speaker hooks with the cavity holes marked with “SPEAKER” under the base.
4. Slide the right speaker inward till the tension hooks are securely locked as shown in Figure below.
5. Repeat step 2~4 for the left speaker.
The right and left speakers are labeled R (Right) and L (Left) on their rear.
When detaching the speakers
32” - Press the tension hook and remove
the speakers in reverse order.
Right Speaker
Left Speaker
26” - Remove the speakers in reverse order.
WARNING
The provided speakers are designed for this product only. It is recommended not to connect
the speakers to other devices. When connecting an other amplifier, the amplifier output should
be within 10W. Output which exceeds 10 W may cause fire.
ALERT
Make sure to remove the speakers before moving the TV. When the speakers are detached
from the unit while carrying it, this may cause damage to the unit or personal injury.
General Information
How to adjust the view angle - 26”/32” LCD TV
You can adjust the panel downward or upward at a 0~15 degree angle.
ENGLISH
15O
Kensington Lock Anti-theft Device - 26”/32”/40” LCD TV
- This display unit supports Kensington standard security lock to prevent theft.
- You should purchase the Kensington lock device personally, if you need. The security lock is available at an
electronics shop.
- For more information, please refer to the following contact information..
* Kensington Technology Group
• Address : 2000 Alameda de las Pulgas 2F san mateo, California 94403-1289
• Tel : +1 650 572 2700
• Fax : +1 650 572 9675
• Web-site : www.kensington.com
40” LCD TV
26”/32” LCD TV
General Information
How To Install Desktop Stand - 42”/50” PDP TV
ENGLISH
1. Place the TV body on a flat desk or a shelf. Clean the surface of the desk or the shelf in order to prevent scratch on the
product.
2. Align the stand with TV body below and fasten the stand bars using 4 fixing screws.
3. After the assembly is over, stand the assembled product at a desired place.
Fixing screws
Desk type stand
Warning : Do not install at an unstable place or on a small support.
(When a child plays around the product and touch it, TV may fall and injure the child.)
General Information
How To Use Speakers (Standing Type) - 42”/50” PDP TV
Parts configuration chart
ENGLISH
2 Speakers (left and right)
4 brackets
16 fixing screws
2 sets of speaker cables
(left and right)
Assembly and Connection Method
Insert brackets into the grooves on
the rear of speakers and fasten them
with fixing screws.
(Left and right side each)
WARNING
Fasten with TV body using fixing
screws. (Left and right side each)
Connect speaker cables between
terminals on the rear of speakers
with speaker connection terminals
on the rear of TV. (Connect cables and
terminals in the same color)
Do not move the product holding the speakers. Always use handles on the TV.
(Brackets connecting TV and speakers may be damaged.)
10
General Information
How To Use Speakers (Desk Type) - 42”/50” PDP TV
ENGLISH
Parts configuration chart
2 Speakers (left and right)
2 Speaker-stands
(left and right)
8 fixing screws
2 sets of speaker cables
(left and right)
Assembly and Connect method
Insert speaker-stands in the groove
on the bottom of speakers and
fasten them using fixing screws.
(Left and right side each)
11
Upright and place them on the
desired place left and right of TV.
(Left and right side each)
Connect speaker cables between
terminals on the rear of speakers and
speaker connection terminals on the
rear of TV. (Connect cables and
terminals with the same color)
General Information
Parts Names and Functions - 26”/32” LCD TV
Front View
ENGLISH
* This product image may be a bit different from the actual product.
Volume buttons
Use these buttons to adjust sound levels.
These buttons also serve as the cursors of
Select/Adjust in Menu mode.
Channel buttons
Use these buttons to change channels. These
buttons also serve as the cursors of Down and
Up buttons in Menu mode.
Select button
Use this button to select each item from the
menu mode.
Menu button
Use this button to display or exit from the menu
mode.
Power button
Use this button to turn on or off the TV.
Remote sensor and power LED.
- Point the remote control toward LED.
- It displays standby or operation status.
- Power Indicator Status Indicator
Status
Red
Standby
Green
Power on
Speakers
See page 7 for information on how to mount
speakers.
Source button
Use this button to switch among inputs
connected to the TV.
12
General Information
ENGLISH
Rear View
HDMI Option
* This product image may be a bit different from the actual product.
Power switch
Full Scart input terminal
Half Scart input terminal
Power (AC) input terminal
Antenna input terminal
DVI Video / HDMI input terminal
Digital Audio output terminal for
coaxial cable
Extend an RS-232 input for ATV
communication.
D-SUB input terminal
DVI/D-SUB Audio input terminal
Component 2 Audio input terminal
Component 2 Video input terminal
Component 1 Audio input terminal
Component 1 Video input terminal
CVBS output terminal
13
SPDIF Optical audio output
terminal
Subwoofer output terminal
Extend an RS-232 input for DTV
communication.
Extend Audio ontput terminal
S-Video input terminal
Speaker terminal
Video(CVBS) input terminal
USB Input Terminal
Audio(CVBS) input terminal
Headphone output terminal
Memory Card Slot
For Q320 Model only
General Information
Parts Names and Functions - 40” LCD TV
Front View
ENGLISH
* This product image may be a bit different from the actual product.
Speakers
Menu button
Use this button to display or exit from the menu
mode.
Power Switch
Remote sensor and power LED.
- Point the remote control toward LED.
- It displays standby or operation status.
- Power Indicator Status Indicator
Status
Red
Standby
Green
Power on
Standby/On button
Use this button to turn on or off the TV.
Select button
Use this button to select each item from the
menu mode.
Channel buttons
Use these buttons to change channels. These
buttons also serve as the cursors of Down and
Up buttons in Menu mode.
Volume buttons
Use these buttons to adjust sound levels.
These buttons also serve as the cursors of
Select/Adjust in Menu mode.
Source button
Use this button to switch among inputs
connected to the TV.
14
General Information
ENGLISH
Rear View
HDMI Option
* This product image may be a bit different from the actual product.
Power (AC) input terminal
Antenna input terminal
Headphone output terminal
DVI Video / HDMI input terminal
Digital Audio output terminal for
coaxial cable
Audio(CVBS) input terminal
D-SUB input terminal
DVI/D-SUB Audio input terminal
Component 2 Audio input terminal
Component 2 Video input terminal
Component 1 Audio input terminal
Component 1 Video input terminal
CVBS output terminal
Full Scart input terminal
15
Video(CVBS) input terminal
Subwoofer output terminal
S-Video input terminal
Extend Audio ontput terminal
USB Input Terminal
Half Scart input terminal
Extend an RS-232 input for ATV
communication
SPDIF Optical audio output
terminal
Extend an RS-232 input for DTV
communication
Memory Card Slot
For Q400 Model only

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2006:03:07 11:03:01-08:00
Create Date                     : 2006:03:07 11:02:38-08:00
Title                           : 1_7_Appen_eng
Author                          : ......
Creator                         : QuarkXPress 3.3K: LaserWriter 8 KH-8.7.1
Producer                        : Acrobat Distiller 5.0.5 for Macintosh
Page Count                      : 18
Mod Date                        : 2006:03:07 11:03:01-08:00
Creation Date                   : 2006:03:07 11:02:38-08:00
Metadata Date                   : 2006:03:07 11:03:01-08:00

EXIF Metadata provided by EXIF.tools