HYUNDAI MOBIS PA765XM Car Audio Bluetooth User Manual PA765XM ATT C E G H I J

Hyundai MOBIS Co., Ltd. Car Audio Bluetooth PA765XM ATT C E G H I J

Users Manual

  FCC ID: PINPA765XM / IC: 4018A-PA765XMC                                                                                   HCT CO., LTD. SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA TEL:+82 31 639 8517    FAX:+82 31 639 8525    www.hct.co.kr Report No. :  HCT-RF09-0731                                                       1/1    ATTACHMENT E.   - User Manual -
Features of your vehicle1224AntennaD300102AHM-EUYour vehicle uses a roof antenna or glassantenna to receive AM or/and FM broad-cast signals.The roof antenna is removable. Toremove the roof antenna, turn it counter-clockwise. To install the roof antenna,turn it clockwise.AUDIO SYSTEMOHM048154NOHM048235NRoof antennaGlass antennaCAUTION•Before entering a place with a lowheight clearance, be sure that theroof antenna is removed.•Be sure to remove the roof anten-na before washing the car in anautomatic car wash or it may bedamaged.•When reinstalling your roofantenna, it is important that it isfully tightened and adjusted tothe upright position to ensureproper reception. But it could beremoved when parking the vehi-cle or when loading cargo on theroof rack.•When cargo is loaded on the roofrack, do not place the cargo nearthe antenna pole to ensure prop-er reception.CAUTION•Do not clean the inside of the rearquarter glass with a cleaner oruse a scraper to remove any for-eign deposits as this may causedamage to the antenna elements.•Avoid adding metallic coatingsuch as Ni, Cd, and so on. Thesecan interfere with FM reception.
4123Features of your vehicleD300200AENSteering wheel audio control (if equipped) The steering wheel audio control buttonis installed to promote safe driving.D300204AHMVOLUME (VOL / ) (1)•Push the lever upward ( ) to increasethe volumeto•Push the lever downward ( ) to decreasethe volume.D300203AHMSEEK/PRESET ( / ) (2)The SEEK/PRESET button has differentfunctions based on the system mode.For the following functions the buttonshould be pressed for 0.8 second ormore.RADIO modeIt will function as the AUTO SEEK selectbutton.CDP/USB/iPod modeIt will function as the FF/REW button.If the SEEK/PRESET button is pressedfor less than 0.8 second, it will work asfollows in each mode.RADIO modeIt will function as the PRESET STATIONbuttons.CDP/USB/iPOD modeIt will function as TRACK UP/DOWN but-ton.D300202AENMODE (3)Press the button to change audio source. - FM(1~2)➟AM➟SAT(1~3)➟CD➟USBAUX(iPod) FM...D300205AHMMUTE (4)•Press the button to mute the sound•Press the button to turn off themicro-phone during a telephone call.Detailed information for audio controlbuttons is described in the followingpages in this section.CAUTIONDo not operate audio remote con-trol buttons simultaneously.1324
Features of your vehicle1244D300600AHM-EEAux, USB and iPod port(if equipped)If your vehicle has an aux and/orUSB(universal serial bus) port or iPodport, you can use an aux port to connectaudio devices and an USB port to plug inan USB and also an iPod port to plug inan iPod.✽NOTICEWhen using a portable audio deviceconnected to the power outlet, noise mayoccur during playback. If this happens,use the power source of the portableaudio device.D300800AHMHow vehicle audio worksAM and FM radio signals are broadcastfrom transmitter towers located aroundyour city.  They are intercepted by theradio antenna on your vehicle. This sig-nal is then received by the radio and sentto your vehicle speakers. When a strong radio signal has reachedyour vehicle, the precise engineering ofyour audio system ensures the best pos-sible quality reproduction. However, insome cases the signal coming to yourvehicle may not be strong and clear. Thiscan be due to factors such as the dis-tance from the radio station, closeness ofother strong radio stations or the pres-ence of buildings, bridges or other largeobstructions in the area.AM broadcasts can be received atgreater distances than FM broadcasts.This is because AM radio waves aretransmitted at low frequencies. Theselong, low frequency radio waves can fol-low the curvature of the earth rather thantravelling straight out into the atmos-phere. In addition, they curve aroundobstructions so that they can provide bet-ter signal coverage.JBM002AM receptionJBM001FM receptionOHM048151
4125Features of your vehicleFM broadcasts are transmitted at highfrequencies and do not bend to follow theearth's surface. Because of this, FMbroadcasts generally begin to fade atshort distances from the station. Also,FM signals are easily affected by build-ings, mountains, or other obstructions.These can result in certain listening con-ditions which might lead you to believe aproblem exists with your radio. The fol-lowing conditions are normal and do notindicate radio trouble:•Fading - As your vehicle moves awayfrom the radio station, the signal willweaken and sound will begin to fade.When this occurs, we suggest that youselect another stronger station.•Flutter/Static - Weak FM signals orlarge obstructions between the trans-mitter and your radio can disturb thesignal causing static or fluttering nois-es to occur. Reducing the treble levelmay lessen this effect until the distur-bance clears.•Station Swapping - As a FM signalweakens, another more powerful sig-nal near the same frequency maybegin to play. This is because yourradio is designed to lock onto the clear-est signal.  If this occurs, select anoth-er station with a stronger signal.•Multi-Path Cancellation - Radio signalsbeing received from several directionscan cause distortion or fluttering. Thiscan be caused by a direct and reflect-ed signal from the same station, or bysignals from two stations with closefrequencies. If this occurs, selectanother station until the condition haspassed.JBM005JBM004JBM003FM radio station
1264Features of your vehicleSatellite radio receptionYou may experience problems inreceiving SIRIUS satellite radio sig-nals in the following situations.•If you are driving in a tunnel or acovered parking area.•If you are driving beneath the toplevel of a multi-level freeway.•If you drive under a bridge.•If you are driving next to a tall vechi-cle(such as a truck or a bus) thatblock the signal.•If you are driving in a valley wherethe surrounding hills or peaks blockthe signal from the satellite.•If you are driving on a mountainroad where is blocked by moun-tains.•If you are driving in an area with talltrees that block the signal(10m ormore), for example on an road thatgoes through a dense forset.•The signal can become weak insome areas that are not covered bythe repeater station network.please note that these may be otherunforeseen circumstances whenthere are problems with the receptionof SIRIUS satellite radio signal.
4127Features of your vehicleUsing a cellular phone or a two-wayradioWhen a cellular phone is used inside thevehicle, noise may be produced from theaudio equipment. This does not meanthat something is wrong with the audioequipment. In such a case, use the cellu-lar phone at a place as far as possiblefrom the audio equipment.Care of discs•If the temperature inside the vehicle istoo high, open the vehicle windows forventilation before using your vehicleaudio.•It is illegal to copy and use MP3/WMAfiles without permission. Use CDs thatare created only by lawful means.•Do not apply volatile agents such asbenzene and thinner, normal cleanersand magnetic sprays made for ana-logue disc onto CDs.•To prevent the disc surface from get-ting damaged. Hold and carry CDs bythe edges or the edges of the centerhole only.•Clean the disc surface with a piece ofsoft cloth before playback (wipe it fromthe center to the outside edge).•Do not damage the disc surface orattach pieces of sticky tape or paperonto it.•Make sure objects other than CDs arenot inserted into the CD player (Do notinsert more than one CD at a time).•Keep CDs in their cases after use toprotect them from scratches or dirt.•Depending on the type of CD-R/CD-RW CDs, certain CDs may not operatenormally according to manufacturingcompanies or making and recordingmethods. In such circumstances, if youstill continue to use those CDs, theymay cause the malfunction of yourvehicle audio system.✽NOTICE - Playing anIncompatible CopyProtected Audio CDSome copy protected CDs, which do notcomply with the international audio CDstandards (Red Book), may not play onyour vehicle audio. Please note that ifyou try to play copy protected CDs andthe CD player does not perform correct-ly the CDs maybe defective, not the CDplayer.CAUTIONWhen using a communication sys-tem such a cellular phone or a radioset inside the vehicle, a separateexternal antenna must be fitted.When a cellular phone or a radio setis used with an internal antennaalone, it may interfere with the vehi-cle's electrical system and adverse-ly affect safe operation of the vehi-cle.WARNINGDon't use a cellular phone whenyou are driving. You should stop ata safe place to use a cellular phone.
Features of your vehicle12841. FM/AM Selection Button2. Power ON/OFF Button and VolumeControl Knob3. Automatic Channel Selection Button 4. SCAN Selection Button5.MUTE Button6. Preset Selection Button7. TUNE & AUDIO Control Knob8. SETUP ButtonRADIO, SET UP, VOLUME  CONTROL (PA710XM, USA/CANADA)
4129Features of your vehicleUsing RADIO, SETUP, VOLUMEand AUDIO CONTROL1. FM/AM Selection Button The FM/AM button toggles between FMand AM. Listed below are the paths asthe system switches from FM to AM andback to FM.•FM/AM : FM1➟FM2➟AM➟FM1...•FM : FM1➟FM2➟FM1...2. Power ON/OFF Button &Volume Control Knob•Turns the audio system on/off whenthe ignition switch is on ACC or ON.•If the knob is turned clockwise/counter-clockwise, the volume will increase/decrease.3. Automatic Channel SelectionButton•When the [SEEK ] is pressed, it willautomatically tune to the next lowerstation. •When the [SEEK ] is pressed, it willautomatically tune to the next higherstation.4. SCAN Button•When the button is pressed, it auto-matically scans the radio stationsupwards.•The SCAN feature steps through eachstation, starting from the initial station,for ten seconds.•Press the [SCAN] button again to stopthe scan feature and to listen to thecurrently selected channel.4. MUTE ButtonWhen the button is pressed, stops sound and “Audio Mute” is displayed on LCD.6. Preset Selection Button•Press [1]~[6] buttons less than 0.8 sec-ond to play the station saved in eachbutton.•Press [1]~[6] button more than 0.8 sec-ond or longer to save the current sta-tion to the respective button with abeep.7. TUNE Knob & Audio ControlKnob• Rotate the knob clockwise or counter-clock wise to increase or decrease fromcurrent frequency.(AM 10kHz, FM 200kHz)Pressing the button changes the BASS,MIDDLE, TREBLE, FADER and BAL-ANCE TUNE mode. The mode selectedis shown on the display. After selectingeach mode, rotate the Audio control knobclockwise or counterclockwise. • BASS ControlTo  increase the BASS, rotate the knobclockwise, while to decrease the BASS,rotate the knob counterclockwise.• MIDDLE ControlTo increase the MIDDLE, rotate the knobclockwise, while to decrease the MID-DLE, rotate the knob counterclockwise.• TREBLE ControlTo increase the TREBLE, rotate the knobclockwise, while to decrease the TRE-BLE, rotate the knob counterclockwise.• FADER ControlTurn the control knob clockwise toemphasize rear speaker sound (frontspeaker sound will be attenuated). Whenthe control knob is turned counterclock-
Features of your vehicle1304wise, front speaker sound will be empha-sized (rear speaker sound will be attenu-ated).• BALANCE ControlRotate the knob clockwise to emphasizeright speaker sound (left speaker soundwill be attenuated). When the controlknob is turned counter clockwise, leftspeaker sound will be emphasized (rightspeaker sound will be attenuated).8. SETUP ButtonPress this Button to enter SETUP mode,If no action is for 8 seconds, it will returnto previous mode.In SEPUP mode, rotate the TUNE knobto move the cursor between items, andpush the TUNE knob to select.• SCROLLSelect whether long file names arescrolled continuously (“ON”) or just once(“OFF”).• SDVCSelect this item to turn the SDVC(SpeedDependent Volume Control) feature ONor OFF. If it is turned ON, volume level isadjusted automatically according to thevehicle speed.• POWER BASS(P.BASS)This function creates virtual soundeffects and allows adjustments to theBASS level.  HIGH ➟MID ➟LOW ➟OFF❋Supported on PA710 ONLY.• SAT (if available)Select default display os SIRIUS mode.“Category/Channel name” or “Artist/SongTitle” can be selected.• PHONE (if available)Select this item to enter BLUETOOTHsetup mode. Refer to “BLUETOOTHPHONE OPERATION” section fordetailed information.
4131Knowing your vehicle1. CD Loading Slot2. CD Eject Button3. CD Selection Button4. Automatic Track Selection Button5. RANDOM play Button6. REPEAT Button 7. CD Indi8. CD LOAD Button9. SCAN Play Button10. INFO Button11. FOLDER Moving Button12. SEARCH Knob & ENTER Button13. DISC Selection ButtonCD(PA710XM, USA/CANADA)
Features of your vehicle1324Using CD Player1. CD Loading SlotPlease face printed side upward and gen-tly press in. When the ignition switch is onACC or ON and power is off, power isautomatically turned on if the CD isloaded. This CDP supports only 12cmCD. If a VCD or data CD are loaded, a"Reading Error" message will be dis-played and the CD will be ejected.2. CD Eject Button•Press [ ] button to eject the CD. Thisbutton works regardless of ignitionswitch status.3. CD Selection ButtonIf there is a CD in the CD DECK it switch-es to CD mode.If there is no CD, then the message "NoCD" will become displayed on the LCDfor 3 seconds and returns to the previousmode.4. Automatic Track SelectionButton•Press [TRACK ] button for less than0.8 second to play from the beginningof current song. •Press [TRACK ] button for less than0.8 second and press again within 1seconds to play the previous song.•Press [TRACK ] button for 0.8 sec-ond or longer to initiate reverse direc-tion high speed sound search of cur-rent song.•Press [TRACK ] button for less than0.8 second to play the next song.•Press [TRACK ] button for 0.8 sec-ond or longer to initiate forward direc-tion high speed sound search of cur-rent song.5. RANDOM Play ButtonTurns on/off the randomization of theplay list of files in the currently playedDISC. To cancel the mode, press the but-ton once again.6. REPEAT ButtonRepeats current song when the button ispressed for less than 0.8 second.Repeats the entire DISC when the buttonis pressed for 0.8 second or longer.7. CD IndicatorWhen car ignition switch is ACC or ONand if the CD is loaded, this indicator islighted. If the CD is ejected, the light isturned off.9. SCAN Play ButtonScans each song in the USB device for10 seconds each. To cancel the mode,press the button once again.10. INFO Button(PA710/PA760)Displays the information of the currentCD TRACK in the order of DISC TITLE ➟DISC ARTIST ➟  TRACK TITLE ➟TRACK ARTIST ➟  TOTAL TRACK  ➟PLAY SCREEN  ➟  DISC TITLE ➟... (notdisplayed if the information is not avail-able on the DISC.)11. FOLDER Moving Button •Press [FOLDER ] button to move tochild folder of the current folder anddisplay the first song in the folder.Press TUNE/ ENTER knob to move tothe folder displayed. It will play the firstsong in the folder.•Press [FOLDER ] button to move toparent folder of the current folder anddisplay the first song in the folder.CAUTION Do not insert a CD if CD indicater islit.
4133Features of your vehiclePress TUNE/ENTER knob to move tothe folder displayed.12. SEARCH Knob & ENTERButton•Turn this knob clockwise to browsesongs after current song, or counter-clockwise to browse songs before cur-rentsong. To play the displayed song,press the knob.•Pressing this knob without turningenters to AUDIO CONTROL mode.
Features of your vehicle1344AUX/USB(PA710XM, USA/CANADA)1. AUX/USB Selection Button2. TRACK Moving Button3. RANDOM Playback Button4. REPEAT Selection Button5. SCAN Selection Button6. INFO Button7. SEARCH Knob & ENTER Button8. FOLDER Moving Button
4135Features of your vehicleCAUTION IN USING USB DEVICE•To use an external USB device,make sure the device is notmounted when starting up thevehicle and mount the deviceafter starting up.•If you start the vehicle when theUSB device is mounted, it maydamage the USB device. (USB isnot ESA.)•If the vehicle is started up orturned off while the external USBdevice is connected, the externalUSB device may not work.•It may not play inauthentic MP3 orWMA files.1) It can only play MP3 files withthe compression rate between8Kbps~320Kbps.2) It can only play WMA musicfiles with the compression ratebetween 8Kbps~320Kbps. •Take cautions for static electricitywhen mounting or dismountingthe external USB device.•An encoded MP3 PLAYER is notrecognizable. (Continued)(Continued)•Depending on the condition ofthe external USB device, the con-nected external USB device canbe unrecognizable.•When the formatted byte/sectorsetting of External USB devices isnot either 512BYTE or 2048BYTE,then the device will not be recog-nized.•Use only a USB device formattedto FAT 12/16/32.•USB devices without USB IFauthentication may not be recog-nizable.•Make sure the USB connectionterminal does not come in contactwith human bodies or externalobjects.•If you repeat mounting andunmounting the USB device in ashort period of time, it may breakthe device.•You may hear a strange noisewhen mounting or dismounting aUSB device. (Continued)(Continued)•If you dismount the external USBdevice during playback in USBmode, the external USB devicecan be damaged or malfunction.Therefore, mount the external USBdevice when the engine is turnedoff or in another mode.•Depending on the type and capac-ity of the external USB device orthe type of the files stored in thedevice, there is a difference in thetime taken for recognition of thedevice, but this is not an indicatorof trouble and you only have towait.•Do not use the USB device for otherpurposes than playing music files.•Use of USB accessories such asrecharger or heater using USB I/Fmay lower performance or causetrouble.•If you use devices such as a USBhub purchased separately, thevehicle’s audio system may notrecognize the USB device.Connect the USB device directlyto the multimedia terminal of thevehicle. (Continued)
Features of your vehicle1364(Continued)•If USB device is divided by logicaldrives, only the music files on thehighest-priority drive are recog-nized by car audio.•Devices such as MP3 Player/Cellular phone/Digital camerathose are not recognizable bystandard USB I/F can be unrecog-nizable.•USB devices other than standard-ized goods (METAL COVER TYPEUSB) can be unrecognizable.•USB flash memory reader (suchas CF, SD, microSD, etc.) or exter-nal-HDD type devices can beunrecognizable.•Music files protected by DRM(DIGITAL RIGHTS MANAGEMENT)are not recognizalbe.•The data in the USB memory maybe lost while using this AUDIO. Itis recommeded to back up impor-tant data on a personal storagedevice.                              (Continued)(Continued)•Please avoid using USB memoryproducts which can be used askey chains or cellular phoneaccessories as they could causedamage to the USB jack. Pleasemake certain only to use plug typeconnector products as shownbelow.
4137Features of your vehicleUsing USB or AUX device1. AUX/USB Selection ButtonIf the auxiliary device is connected, itswitches to AUX or USB mode to play thesound from the auxiliary player. If there is no auxiliary device, then themessage "No Media" will become dis-played on the LCD for 3 seconds andreturns to previous mode.2. TRACK Moving Button•Press the [TRACK ] button for lessthan 0.8 second to play from the begin-ning of the current track. Press the button for less than 0.8 sec-ond and press it again within 1 sec-onds to move to and play the previoustrack. Press the button for 0.8 second orlonger to play the track in reversedirection in fast speed.•Press the [TRACK ]  button  for lessthan 0.8 second to move to the nexttrack. Press the button for 0.8 secondor longer to play the track in forwarddirection in fast speed.3. RANDOM Playback ButtonPress the button for less than 0.8 secondto start or stop the random playback ofthe songs in the current folder.Press the button for more than 0.8 sec-ond to randomly play the entire songs inthe USB device.Press the button again to cancel the mode.4. REPEAT ButtonPress the button for less than 0.8 secondto repeat the current song.Press the button for more than 0.8 sec-ond to repeat all songs in the currentlyplayed folder sequentially (FOLDERREPEAT)5. SCAN Selection ButtonScans each song in the USB device for10 seconds each.Press the button once again to cancelscanning.6. INFO ButtonDisplays the information of the file cur-rently played in the order of FILE NAME➟ TITLE ➟ ARTIST ➟ ALBUM ➟ FOLDER➟  TOTAL FILE ➟NORMAL DISPLAY ➟FILE NAME ➟…  (Displays no informa-tion if the file has no song information.)7. SEARCH Knob & ENTERButton• Turn this knob clockwise to browsesongs after current song, or counterclockwise to browse songs before cur-rent song. To play the displayed song,press the knob.• Pressing this knob without turningenters to AUDIO CONTROL mode.8. FOLDER Moving Button•Press [FOLDER ] button to move tochild folder of the current folder anddisplay the first song in the folder.Press TUNE/ ENTER knob to move tothe folder displayed. It will play the firstsong in the folder.•Press [FOLDER ] button to move toparent folder display the first song inthe folder. Press TUNE/ENTER knob to move tothe folder displayed.
Features of your vehicle13841. iPod Selection Button2. TRACK Moving Button3. REPEAT Selection Button4. RANDOM Playback Button5. INFO Button6. SEARCH Knob & ENTER Button7. CATEGORY Selection ButtoniPod®(PA710XM, USA/CANADA)
4139Features of your vehicle✽NOTICE FOR USING iPodDEVICE•Some iPod models might not sup-port the communication protocoland the files will not be played. Supported iPod models: - iPod Mini- iPod 4th(Photo) ~ 6th(Classic)generation- iPod Nano 1st~4th generation- iPod Touch 1st~2nd generation•The order of search or playback ofsongs in the iPod can be differentfrom the order searched in theaudio system.•If the iPod crashes due to its ownmalfunction, reset the iPod. (Reset:Refer to iPod manual)•An iPod may not operate normallyon low battery.CAUTION IN USING iPod DEVICE•You need the power cable exclu-sive for an iPod in order to oper-ate an iPod with the buttons onthe audio system. Connectionthrough standard iPod-USB cableis not supported, so do not use itwith car audio.•When connecting the device withan iPod cable, push in the jackfully so as to not cause interferewith communication.•When adjusting the sound effectsof an iPod and the audio system,the sound effects of both deviceswill overlap and might reduce ordistort the quality of the sound.•Deactivate (turn off) the equalizerfunction of an iPod when adjust-ing the audio system’s volume,and turn off the equalizer of theaudio system when using theequalizer of an iPod. (Continued)(Continued)•When the iPod cable is connected,the system can be switched to theAUX mode even without the iPoddevice and can cause noise.Disconnect the iPod cable whenyou are not using the iPod device.•When not using iPod with caraudio, detach the iPod cable fromiPod. If not, the iPod may remain inaccessary mode, and may notwork properly.
Features of your vehicle1404Using iPod1. iPod Selection ButtonIf iPod is connected, it switches to theiPod mode from the previous mode toplay the song files stored in the iPod.If there is no iPod connected, then it dis-plays the message "No Media" for 3 sec-onds and returns to the previous mode.2. TRACK Moving Button•Press the [TRACK ] button for lessthan 0.8 second to play from the begin-ning of the song currently played. Press the button for less than 0.8 sec-ond and press it again within 1 sec-onds to move to and play the previoustrack. Press the button for 0.8 second orlonger to play the song in reversedirection in fast speed.•Press the [TRACK ] button for lessthan 0.8 second to move to the nexttrack.Press the button for 0.8 second orlonger to play the song in forward direc-tion in fast speed.3. REPEAT ButtonRepeats the song currently played.4. RANDOM Playback ButtonPress the button for less than 0.8 secondto start or stop the random playback ofthe songs within the current category.Press the button for longer than 0.8 sec-ond to randomly play all songs in theentire album of the iPod.Press the button once again to cancelthe mode.5. INFO ButtonDisplays the information of the file cur-rently played in the order of TITLE ➟ARTIST ➟ALBUM ➟NORMAL DISPLAY➟TITLE ➟... (Displays no information ifthe file has no song information.)6. SEARCH Knob & ENTERButtonWhen you rotate the knob clockwise, itwill display the songs (category) aheadof the song currently played (category inthe same level).Also, when you rotate the knob counter-clockwise, it will display the songs (cate-gory) before the song currently played(category in the same level).To  listen to the song displayed in thesong category, press the button to skip toand play the selected song.Pressing the button changes the BASS,MIDDLE, TREBLE, FADER and BAL-ANCE TUNE mode. The mode selectedis shown on the display. After selectingeach mode, rotate the Audio control knobclockwise or counterclockwise.7. CATEGORY Selection ButtonMoves to the upper category from cur-rently played category of the iPod.  To  move to (play) the category (song)displayed, press TUNE/ENTER knob.You will be able to search through thelower category of the selected category.The order of iPod’s category is SONG,ALBUMS, ARTISTS, GENRES, and iPod.
4141Features of your vehicleSatellite radio channels:SIRIUS Satellite Radio has over 130 chan-nels, including 69 channels of 100% com-mercial-free music, plus sports, news, talkand entertainment available nationwide inyour vehicle. For more information and acomplete list of SIRIUS Satellite Radiochannels, visit sirius.com in the UnitedStates, sirius-canada.ca in Canada, or callSIRIUS at 1-888-539-7474.Satellite radio reception factors:To  receive the satellite signal, your vehi-cle has been equipped with a satelliteradio antenna located on the roof of yourvehicle. The vehicle roof provides thebest location for an unobstructed, openview of the sky, a requirement of a satel-lite radio system. Like AM/FM, there areseveral factors that can affect satelliteradio reception performance:•Antenna obstructions: For optimal recep-tion performance, keep the antenna clearof snow and ice build-up and keep lug-gage and other material as far away fromthe antenna as possible.•Terrain: Hills, mountains, tall buildings,bridges, tunnels, freeway overpasses,parking garages, dense tree foliageand thunderstorms can interfere withyour reception.SIRIUS Satellite Radio service:SIRIUS Satellite Radio is a subscription-based satellite radio service that broadcastsmusic, sports, news and entertainment pro-gramming to radio receivers, which areavailable for installation in motor vehicles orfactory installed, as well as for the home,portable and wireless devices, and throughan Internet connection on personal computer.Vehicles that are equipped with a factoryinstalled SIRIUS Satellite Radio systeminclude:•Hardware and an introductory trial sub-scription term, which begins on thedate of sale or lease of the vehicle.•For a small upgrade fee, access toSIRIUS music channels, and otherselect channels over the Internet usingany computer connected to theInternet (U.S. customers only). For information on extended subscrip-tion terms, contact SIRIUS at 1-888-539-7474.NOTE:Satellite Radio requires SIRIUS®com-patible receiver and a subscription serv-ice fee after trial period. Vehicles without a factory-installedradio receiver require hardware pur-chase and installation.  Please see yourdealer for further details. All fees andprogramming subject to change. Subscriptions governed by the SIRIUSTerms & Conditions available atwww.sirius.com / serviceterms.Available only in the 48 contiguousUnited States and the District ofColumbia. Service available in Canada;see www.siriuscanada.caChrysler LLC shall not be responsiblefor any such programming changes.Satellite Radio Electronic SerialNumber (ESN): This 12-digit SatelliteSerial Number is needed to re-activate,modify or track your satellite radioaccount. You will need this number whencommunicating with SIRIUS. SIRIUS Satellite Radio information (if equipped)
Features of your vehicle14241. SATELLITE RADIO Selection Button2. Channel Selection Button3. Preset Selection Button4. SCAN Selection Button5. Tune Knob and Enter Button   6. CAT/FOLDER Button 7. INFO Selection ButtonSIRIUS SATELLITE RADIO (PA710XM,USA/CANADA)
4143Features of your vehicleUsing SIRIUS Satellite RadioYour Kia vehicle is equipped with 3months complimentary period of SIRIUSSatellite Radio so you have access toover 130 channels of music, information,and entertainment programming.ActivationIn order to extend or reactivate your sub-scription to SIRIUS Satellite Radio, youwill need to contact SIRIUS CustomerCare at 888-539-7474. Have your 12digit SID (Sirius IdentificationNumber)/ESN (Electronic SerialNumber) ready. To retrieve the SID/ESN,turn on the radio, press the [SAT] button,and tune to channel zero. Please notethat the vehicle will need to be turned on,in Sirius mode, and have an unobstruct-ed view of the sky in order for the radio toreceive the activation signal.1. SATELLITE RADIO SelectionButton(SIRIUS Satellite Radio)Press the [SAT] button to switch to SIR-IUS Satellite Radio.  It cycles through thedifferent bands as noted below.SAT1➟SAT2➟SAT3➟SAT1➟...2. Channel Selection Button•Press [TRACK ] or [SEEK ] but-ton for less than 0.8 second to selectprevious or next channel.•Press [TRACK ] or [SEEK ] but-ton for 0.8 second or longer to continu-ously move to previous or next chan-nel.•if "CATEGORY" Icon is displayed atthe top of the screen, channel up/downis done through the channels withincurrent category.3. Preset Selection Button•Press [1]~[6] buttons less than 0.8 sec-ond to play the channel saved in eachbutton.•Press [1]~[6] button for 0.8 second orlonger to save current channel to therespective button with a beep.4. SCAN Selection Button •When the [SCAN] button is pressed, itautomatically scans the radio stationsupwards.•The SCAN feature steps through everychannel, starting from the initial chan-nel, for ten seconds.•Press the [SCAN] button again to stopthe scan feature and to listen to thecurrently selected channel.•if "CATEGORY" Icon is displayed atthe top of the screen, channel chang-ing is done through the channels with-in current category.5. Tune Knob and Enter Button•Rotate clockwise to increase the chan-nel  number or to scroll down the cate-gory list.•Rotate counterclockwise to decreasethe channel number or to scroll up thecategory list.•Press this to make selection of chan-nels or items.
Features of your vehicle14446. CAT/FOLDER Button•Press [CAT ] or [FOLDER ] but-ton to enter the Category List Mode.The display will indicate the categoryitems, highlight the category that thecurrent channel belongs to.•In the Category List Mode, press thesebuttons to navigate category list.•Press [ENTER] Button to select thelowest channel in highlighted category.•If channel is selected by selecting cat-egory "CATEGORY" Icon is displayedat the top of the screen.7. INFO Selection ButtonDisplays the information of the currentchannel as below when the button ispressed each time.•When default display is CAT/CHCategory/Channel➟Artist/Title➟Composer (if available)➟  Category/Channel ➟...•When default display is ART/TITLEArtist/Title➟Category/Channel➟Composer(if available)➟Artist/Title➟...✽Troubleshooting1. Antenna ErrorIf this message is displayed, the anten-na or antenna cable is broken orunplugged.  Please consult with yourKia dealership. 2. Acquiring SignalIf this message is displayed, it meansthat the antenna is covered and thatthe SIRIUS Satellite Radio signal isnot available.  Ensure the antenna isuncovered and has a clear view of thesky.
BLUETOOTH PHONE OPERATION ■ General Feature• This system supports Bluetooth, a wire-less system that allows you to make orreceive calls without taking your handsfrom the steering wheel and withoutusing  cables to connect the phone andsystem.• The phone must be paired to the systembefore using the hands-free feature.Only one linked cellular phone can beused with the system at a time. TheSystem is available in English, USSpanish, or Canadian French languages.✽NOTICESome Bluetooth devices do not offer aperfect compatibility with this system.■Voice Recognition Activation• The voice recognition engine containedin the Bluetooth System can be activat-ed in the following conditions: - Button ActivationThe voice recognition system will beactive when the  button is pressedand after the sound of a Beep.- Active ListeningThe voice recognition system will beactive for a period of time when theVoice Recognition system has askedfor a customer response.• The system can recognize single digitsfrom zero to nine while number greaterthan ten will not be recognized.• If the command is not recognized, thesystem will announce "Pardon" or Noinput voice signal from microphone. (Noresponse)• The system shall cancel voice recogni-tion mode in following cases : Whenpressing the  button and sayingcancel following the beep. When notmaking a call and pressing the  but-ton. When voice recognition has failed 3consecutive times.4145Features of your vehicleCAUTIONIf the vehicle is moving do not use acellular phone or connect theBluetooth phone.BluetoothVolumeOperationButton
Features of your vehicle1464• At any time if you say "help", the sys-tem will announce what commands areavailable.■ Menu tree■Phone Setup• Pairing phoneTo  use the hands-free system, you needto register your phone in the system. Up to5 phones can be registered in the system.1. Press the  button. 2. Say "Set Up".3. Say "Pair Phone".4. Say "Yes".5. Say the name of the contact.6. Say "Yes".7. The Pairing procedure of the cellularphone varies according to each cellu-lar phone.✽NOTICEThe system may not function in the fol-lowing cases: If 5 phones have already been registered. If the system cannot communicate withthe phone.• To connect phoneThe registered phones can be selected.When the system connects to Bluetooth,the phone previously used is automati-cally selected. Select a different phone ifnecessary. Only the selected phone canbe used with the hands-free system.1. Press the  button.2. Say "Set Up".3. Say "Select Phone".4. Say the name of the contact or thenumber of the contact.5. Say "Yes".✽NOTICEThe system may not function in the fol-lowing cases: If the phone is not found. If the system does not recognize thevoice command.• Deleting phoneThe registered phones can be deleted.1. Press the  button.2. Say "Set Up".3. Say "Delete Phone".4. Say the name of the contact, the num-ber of the contact  or "Delete all phone".5. Say "Yes".Pair phoneSelect phoneChange priorityDelete phoneBluetooth offSetupAdd entryPhonebookChangeDelete nameBy PhoneBy voiceCall By nameBy number
4147Features of your vehicle• Changing PriorityThe connection priority for registeredphones can be changed.1. Press the  button. 2. Say "Set Up".3. Say "Change Priority".4. Say the name of the contact or thenumber of the contact.5. Say "Yes".•Turning Bluetooth on / offBluetooth function can be  switched ON/OFF. initial status : Bluetooth ON1. Press the button. 2. Say "Set Up".3. Say "Bluetooth off".4. Say "Yes".• Turning Bluetooth on1. Press the send or button.2. Say "yes".3. The Bluetooth will be turned on.■ Phone Book• Adding EntryPhone numbers and voice tags can beregistered. Entries registered in the phonecan also be transferred.• Adding Entry by Voice1. Press the button.2. Say "phonebook".3. Say "add entry".4. Say "by voice".5. Say the name of the contact.6. Say "yes".7. Say the phone number.8. Say "store".9. Say "Home", "Office", "Mobile", "Other"or "default".10. Say "Yes" to store an additional  loca-tion for this contact.• Adding Entry by phone1. Press the button.2. Say "phonebook".3. Say "add entry".4. Say "by phone".5. Say "yes".6. Transfer procedures may vary depend-ing on the cellular phone.✽NOTICEThe system can recognize single digitsfrom zero to nine. Numbers that are tenor greater are not recognized.To speed up input, it is a good idea togroup all digits into a continuous  string. However, you can enter each digit indi-vidually or group digits together in pre-ferred string lengths.The display corresponding to each oper-ation  appears on the screen as follows:Input operation1. say: "Nine, nine, five"Display: "995"2. say: "Seven, three, four"Display: "995734"• Changing NameThe registered names can be changed.1. Press the button.2. Say "phonebook".3. Say "Change name".4. Say the name of the phonebook [voicetag].5. Say "yes".6. Say the name of the phonebook to bechanged.
Features of your vehicle1484• Deleting nameThe registered names can be deleted.1. Press the  button.2. Say "phonebook".3. Say "Delete name".4. Say the name of the contact.5. Say "yes".■ Making a phone call• Calling by NameThe system dials the numbers corre-sponding to the spoken names regis-tered in the system.1. Press the  button.2. Say "Call".3. Say "name".4. Say "<John>".6. Say "<at home>".7. Say "yes".✽TipA shortcut to each of the following  func-tions is available.1. Say "Call name".2. Say "Call <john>".3. Say "Call <john at home>".• Dialing by NumberThe system will make a phone call bydialing the spoken numbers.The system can recognize single digitsfrom zero to nine.1. Press the  button.2. Say "Call".3. Say "Number".4. Say "<digit number>".5. Say "<added digit number>".6. Say "Dial".✽TipA shortcut to each of the following  func-tions is available.1. Say "Dial number".2. Say "Dial <digit>".
4149Features of your vehicle■ Receiving a phone callWhen receiving a phone call, a ring toneis audible and the system changes intotelephone mode.When receiving a phone call, the phonenumber and the message "Incoming" willbe displayed.• Do either one of the following:  Press the send switch to take the call.Press the end switch to refuse the call.• To adjust the ring volume, push "+" or "-"on the steering volume controls.Volume adjustment cannot be madeusing the audio system.• To transfer a call to the phone:The received call can be transferredfrom the hands-free system to the cellu-lar phone that is connected to Bluetooth. For details, please refer to you user'smanual for the cellular phone or go to theKey matrix in this manual (next page).■ Talking on the phoneWhen talking on the phone, the displaywill differ depending on whether or notthe vehicle is in motion.Number and "active call" is displayed.When the call is finished, press the endswitch.✽NOTICEIn the following situations, your voicemay not reach the other party:1. Talk alternately with the other partyon  the phone. If you talk at the sametime, the voice may not reach eachother parties. (This is not a malfunc-tion.) (It is not a malfunction.)2. Keep the volume of receiving voice toa low level. Otherwise, high volumesmay result in an echo. When you talkon the phone, speak clearly towardsthe microphone.3. When driving on a rough road.4. When driving at high speeds.5. When the window is open.6. When the air conditioning vents arefacing the microphone.7. When the sound of the air condition-ing fan is loud.
Features of your vehicle1504■ Key matrixNo.ClassPaired H/PEmpty Disconnected1SHORTLONGSHORTSHORTLONG[10sec]LONG[10sec]Normal modeBT SETUP menuIncoming Call Outgoing Call Active Call 2nd CallNot Paired Not Connecting --Accept CallConnected-2nd call1st Call:waiting2nd Call:active2nd Call2nd Call:waiting1st Call:activeKEY------Transfer call:secret callEnd CallVR MODE CancelVR MODE CancelVR MODE CancelVR MODE Cancel Reject Call End Call End Call-ActiveChangelanguage-ActiveSpeakerAdaptation(Only English)ChangelanguageActiveChangelanguageActive-SpeakerAdaptation(Only English)Changelanguage-----------23
  This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.   Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.  This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.  This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum 20 cm between the radiator and your body. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter unless authorized to do so by the FCC.  IC Warning Operation of this device is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Navigation menu