ICOM orporated 328601 UHF Transceiver User Manual FA SC61UC 2

ICOM Incorporated UHF Transceiver FA SC61UC 2

Contents

User Manual - Cut Antenna

Thank you for purchasing theFA-SC61UC UHF ANTENNA. Please read these instructionsthoroughly before using theFA-SC61UC.400 MHz420 MHz440 MHz460 MHz480 MHz500 MHz520 MHz 380 MHz360 MHz0Antenna capFA-SC61UCThe optimum bandwidth is ±8%of the tuned frequency.For optimum performance tuneto the center transmit frequencyof the radio.Cutting InstructionsqAlign the bottom of the anten-na onto the 0 position of thecutting guide diagram at left.wMark the antenna at thelength corresponding to thedesired frequency to betuned.FA-SC61UC A-6532K-1EX-wPrinted in Japan© 2006-2009 Icom Inc.eCut the antenna to themarked length.• Use a wire cutter that cancut at least 1.2 mm (d) ofpiano wire.rApply adhesive to the top ofthe antenna and attach thesupplied antenna cap.• Use of Cemedine Co.Super-X No. 8008 black(Icom parts number:8950002910) or similar isrecommended.Antenna CuttingChartNOTE:Antenna cap must be inserted after cutting the element otherwise water immersion makes the element damaged.Center frequency(MHz)Length (mm)185175165156148142136129125360380400420440460480500520CAUTION:Making antenna cuts at other than the prescribed lengths specified could void the user's authority to operate the equipment.

Navigation menu