ICOM orporated 384601 UHF P25 Transceiver User Manual

ICOM Incorporated UHF P25 Transceiver

a href="https://usermanual.wiki/ICOM-orporated" itemprop="url"> ICOM orporated >

User manual

– 4 –1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, JapanThank you for choosing this Icom product. READ ALL INSTRUCTIONS carefully and completely before using this product.INSTRUCTIONSVHF P25 TRANSCEIVERIç-F7520UHF P25 TRANSCEIVER Iç-F7510SUPPLIED ACCESSORIESThis instruction sheet includes some functions that are usable only when they are preset by your dealer. The transceiver may have other functions and operations that are not described in this instruction sheet. Ask your dealer for preset function details.IMPORTANTNOTE: Some accessories may not be supplied, or the shape may be different, depending on the transceiver version.A key element in the performance of any communication systems is the antenna. Contact your dealer for information regarding antennas and how to install them.ANTENNAFuses are installed in the supplied DC power cable. If a fuse blows, track down the source of the problem, repair it, and then replace the damaged fuse with a new rated one. Fuse rating: 20A USE only 20 A fusesFUSE REPLACEMENTIf the transceiver becomes dusty or dirty, wipe it clean with a soft, dry cloth.DO NOT use harsh solvents such as Benzine or alcohol, as they may damage the transceiver's surfaces.CLEANINGDC power cableSponges*2Mounting bracketFlat washers Spring washersBracket bolts Mounting screws (M5×12)Self-tapping screws (M5×16)Nuts*2Used for labelling the pro-grammable function keys according to their assinged functions.Used for the optional unit installation.Ask your dealer for details.*1Function name stickers*1Microphone(Self-grounding type)Microphone hanger and screw setA-7383D-1EX Printed in Japan © 2017 Icom Inc.– 1 –Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the United Kingdom, Germany, France, Spain, Russia, Australia, New Zealand, and/or other countries.The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Icom inc. is under license. All other products or brands are registered trademarks or trademarks of their respective holders.FUNCTION DISPLAYIcon AreaText AreaKey Display AreaqwNOTE: The screen capture is an example. The displayed position of each icon may differ, depending on the function being used. DIcon AreaIndicatorsq SIGNAL STRENGTH INDICATOR Displays the relative received signal strength.w CLOCK Displays the current time. “AM” or “PM” is displayed beside the time display when the 12 hour display format is selected. “--:--” is displayed instead of the current time when the internal clock is not set.IconsPOWER ICON • “L1” is displayed when the output power is set to low. • “L2” is displayed when the output power is set to mid. • “H” is displayed when the output power is set to high.AUDIBLE ICON Displayed when the channel is in the ‘audible’ (unmute) mode.MESSAGE ICON • Blinks after messages (Message or Status Message) have been received. • Stops blinking when the screen is changed, or any key is pushed, but is displayed if unread messages are still in the Message memory. • Disappears when all messages in the Message memory have been read.BELL ICON Displayed when a matching signal is received, depending on the presetting.SCAN ICON • Displayed when a scan is paused. • Blinks while a scanning.SCAN TARGET CHANNEL ICON • Displayed when the channel is selected as a scan target channel.SCRAMBLER ICON In the Analog mode: • Displayed when the Voice Scrambler function is ON.GPS ICON • Displayed when valid position data is received. • Blinks when searching for satellites or calculating position data.RECORD ICON • Displayed when the Record function is ON. • Blinks while recording audio. “R” is displayed when there is no microSD card free space and you cannot record audio.TALK AROUND ICON Displayed when the Talk Around function is ON.PHONE ICON • Displayed when the transceiver is connected to a telephone network on the selected channel. • Blinks while receiving a phone call.LONE WORKER ICON Displayed when the Lone Worker function is ON.NOISE CANCEL ICON Displayed when the Noise Cancel function is ON. SURVEILLANCE ICON Displayed when the Surveillance function is ON.VOX ICON Displayed when the VOX function is ON.Bluetooth® ICON • Displayed when Bluetooth® is activated. • Lights Blue when a Bluetooth® device is connected. • Does not light when no Bluetooth® device is connected. microSD ICON Displayed when a microSD card is inserted.  “R” is displayed when the microSD card has not been formatted.USB ICON Displayed when a USB device is connected. DText AreaDisplays the selected Zone number, Channel number, and Channel name, if set. DKey Display AreaDisplays the assigned function of [P1] and [P2].  Ask your dealer about the assigned Software key function.
– 2 – – 3 – DAbout the Status indicator • Lights red while transmitting. • Lights green while receiving a signal, or when the squelch is open.PANEL DESCRIPTION DAbout the Microphone connectorConnect the supplied or optional microphone.NEVER connect non-specifi ed microphones. The pin assignments may be different and may damage the transceiver.Speaker[VOL]Status indicatorMicrophone connectorFunction displaydisplay[OK] [Emer][Emer][Up]/[Down][Right]/[Left][Back][P1] [P2] Power keyREAR PANEL CONNECTIONNOTE: Different functions may have been assigned to the keys by your dealer, except for the Power key. DTurning power ONPush [ ] to turn ON the transceiver. DReceiving and TransmittingReceiving:1. Push [Up] or [Down] to select a channel.2. When receiving a call, rotate [VOL] to adjust the audio output level to a comfortable listening level.Transmitting:1. Wait until the channel is clear to avoid interference.2. While holding down [PTT], speak at your normal voice level. 3. Release [PTT] to receive.BASIC OPERATIONOPTIONS • SP-30, SP-35, SP-35L EXTERNAL SPEAKERS Input impedence: 4 Ω SP-30: Rated input= 20 W, Maximum input = 30 W SP-35/SP35L: Rated input= 5 W, Maximum input = 7 W • HM-220, HM-220T, HM-221, HM-221T HAND MICROPHONES HM-220: Self-grounding heavy duty microphone HM-220T: Self-grounding heavy duty DTMF microphone HM-221: Hand microphone HM-221T: DTMF microphone •SM-29 DESKTOP MICROPHONE •UX-241 GPS ANTENNA Enables you to use the GPS function. •VS-3 Bluetooth® HEADSET The Bluetooth® headset with a [PTT] switch. •About the third party Bluetooth® headsets: Icom has checked the PTT operation with some 3M Peltor headsets such as the WS Headset XP, WS ProTac XP and WS Alert XP. (Compatibility not guaranteed.)IMPORTANT:To maximize the readability of your signal:1. After pushing [PTT], pause briefl y before you start speaking.2. Hold the microphone 5 ~ 10 cm (2 ~ 4 inches) from your mouth, then speak at your normal voice level.Antenna12 VBatteryqerutSolderCrimpNOTE: Use the terminals as shownbelow for the cable connections.wBlackRedyANTENNA CONNECTORConnect to an antenna. Contact your dealer about antenna selection and placement.qwD-Sub 25-pinConnects to an external unit.tGPS ANTENNA CONNECTOR Connect the UX-241 GPS antenna. eIGNITION LEADConnects to an ignition line.Do not put pressure on this lead. Binding to the DC power cable is recommended.uMICROPHONE HANGERFor a self-grounding type:The microphone ON/OFF hook functions can be used without the vehicle’s ground.For a non-self-grounding type:Connect the microphone hanger to the vehicle’s ground for microphone ON/OFF hook functions.rConnects to a 12 V DC battery.Pay attention to polarities. NEVER connect to a 24 V battery. This will damage the transceiver.iiEXTERNAL SPEAKER JACKConnect a 4 ~ 8 Ω external speaker.RR WARNING! NEVER remove the fuse holders from the DC power cable.yUSB (Micro-B) CABLEConnects to a PC.Fuse holdersNon-self-grounding typeSelf-grounding typeUser supplied
– 4 –– 1 –Thank you for choosing this Icom product.READ ALL PRECAUTIONS carefully and completely before using this product.1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan A-7383D-2EX-0a Printed in Japan © 2017 Icom Inc.PRECAUTIONSVHF P25 TRANSCEIVERIç-F7520UHF P25 TRANSCEIVERIç-F7510WORD DEFINITIONRDANGER! Personal death, serious injury or an explosion may occur.RWARNING! Personal injury, re hazard or electric shock may occur.CAUTION Equipment damage may occur.NOTE If disregarded, inconvenience only. No risk of personal injury, re or electric shock. RWARNING! NEVER connect the transceiver to an AC outlet. This may pose a re hazard or result in an electric shock. RWARNING! NEVER operate the transceiver during a lightning storm. It may result in an electric shock, cause a re or damage the transceiver. Always disconnect the power souce and antenna before a storm. RWARNING! NEVER connect the transceiver to a power source of more than 16 V DC such as a 24 V battery. This could damage the transceiver. RWARNING! NEVER cut the DC power cable between the DC plug and fuse holder. If an incorrect connection is made after cutting, the transceiver might be damaged. RWARNING! NEVER place the transceiver where normal operation of the vehicle may be hindered or where it could cause bodily injury.CAUTION: NEVER expose the transceiver to rain, snow or any liquids.CAUTION: CONFIRM that all connectors and jacks are dry and clean before attachment. Exposing them to dust or water will result in serious damage to the transceiver.DO NOT place or leave the transceiver in areas with temperatures below –30°C (–22°F) or above +60°C (+140°F), or in areas subject to direct sunlight, such as the dashboard.DO NOT operate the transceiver without running the vehicle’s engine. The vehicle’s battery will quickly run out when the transceiver transmits while the vehicle’s engine is OFF.DO NOT place or leave the transceiver in excessively dusty environments.DO NOT place the transceiver against walls. Otherwise heat dissipation will be obstructed.DO NOT use harsh solvents such as Benzine or alcohol when cleaning, as they damage the transceiver’s surfaces.BE CAREFUL! The transceiver will become hot when operating continuously for long periods.USE the specied microphone only. Other microphones have different pin assignments and may damage the radio.Place the radio in a secure place to avoid inadvertent use by unauthorized persons.This transceiver has an air vent on the bottom panel of the transceiver to meet the IP55 requirements.BE CAREFUL! DO NOT block the air vent when installing the transceiver.EXPLICIT DEFINITIONSIcom is not responsible for the destruction or damage to the Icom transceiver, if the malfunction is because of: • Force majeure, including, but not limited to, res, earthquakes, storms, oods, lightning, other natural disasters, disturbances, riots, war, or radioactive contamination. • The use of Icom transceivers with any equipment that is not manufactured or approved by Icom.PRECAUTIONS
Download:
Mirror Download [FCC.gov]
Document ID3466015
Application IDm72TJatcsnzgyVFwgFYuAg==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize43.81kB (547605 bits)
Date Submitted2017-07-14 00:00:00
Date Available2017-10-31 00:00:00
Creation Date2017-03-17 14:25:37
Producing SoftwareAdobe PDF Library 10.0.1
Document Lastmod2017-06-05 15:41:41
Document TitleUser manual
Document CreatorAdobe InDesign CS6 (Windows)
FCC ID Filing: AFJ384601

Navigation menu