ID TECH IDCA36-0119 Card Reader User Manual

ID TECH Card Reader Manual

a href="https://usermanual.wiki/ID-TECH" itemprop="url"> ID TECH >

Manual

           ID TECH OmniXpress Reader User Manual          FCC ID:WQJ- IDCA36-0119  USER MANUAL  OmniXpress Reader          Version V1.00
           ID TECH OmniXpress Reader User Manual   Warning Changes or modifications not expressly approved by IDTECH can void the user’s authority to operate this equipment  Notes: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  —Consult the dealer or an experienced radio/TV technician for help.  FCC Warning: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.  Installers and users are cautioned not to use any RS-232 cable other than the one supplied with the unit  Installers and users are cautioned not to remove the ferrite cores on the RS-232 and DC power cables supplied with the unit Limited Warranty ID TECH warrants this product to be in good working order for a period of one year from the date of purchase. If this product is not in good working order as warranted above, or should this product fail to be in good working order at any time during the warranty period, repair or replacement shall be provided by ID TECH. This warranty does not cover incidental or consequential damages incurred by consumer misuse, or modification of said product. For limited warranty service during the warranty period, please contact ID TECH to obtain an RMA number and instructions for returning the product. ©2008 International Technologies & Systems Corporation. The information contained herein is provided to the user as a convenience. While every effort has been made to ensure accuracy, ID TECH is not responsible for damages that might occur because of errors or omissions, including any loss of profit or other commercial damage. The specifications described herein were current at the time of publication, but are subject to change at any time without prior notice. ID TECH is a registered trademark of International Technologies & Systems Corporation. Spectrum and Value through Innovation are trademarks of International Technologies & Systems Corporation.   ID TECH 10721 Walker Street
Download:
Mirror Download [FCC.gov]
Document ID1067221
Application ID9+Lbt7I98Df2iW1p1HIxQQ==
Document DescriptionManual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize6kB (74967 bits)
Date Submitted2009-02-12 00:00:00
Date Available2009-02-12 00:00:00
Creation Date2009-02-12 09:15:08
Producing SoftwareAcrobat Distiller 5.0 (Windows)
Document Lastmod2009-02-12 09:15:08
Document TitleManual
FCC ID Filing: WQJ-IDCA36-0119

Navigation menu