IDTECK LX007 RFID With Finger Printer User Manual

ID-Teck Co Ltd RFID With Finger Printer LX007 English 071001

a href="https://usermanual.wiki/IDTECK" itemprop="url"> IDTECK >

Contents

User Manual 1 2

11 Forced Door Open Alarm When the door is opened by force, the door contact sensor will be activated. For this application, you have to install the door contact sensor and properly set the door contact time and outputs to the alarm devices. The Forced Door Open Alarm will be generated until the alarm is disconnected. Door Open Timeout Alarm The Door Open Timeout Alarm will be generated when the door is open for longer than a certain time limit, even after the door is opened followed by a normal authentication process. The Overtime Door Open Alarm will continue to ring until the door is closed. Anti-pass Back If an additional proximity reader is used, the Anti-pass back mode can be applied. In the Anti-pass back mode, a user is not allowed to enter or exit when the user violates the one entry/one exit rule. For example, an identical user won’t be able to enter if he or she previously exited the door without going through a proper authentication process. Duress Alarm In case of duress, enter the 2-digit Duress Password and press the <ENT> key before the normal access process. The door can be opened as usual, but the duress alarm is also generated at the same time. The duress alarm output will be sent to the TTL output and an alarm event will be sent to the host PC. ARM / DISARM Function for Alarm Panel While a device is in the ARM condition, its reader ports are all frozen and inputs to the ports are not processed so that no one can get access to the door. When this mode is applied, the Star LX007 / IDTECK LX007SR sends signals to other connected security devices so that they can function accordingly. Two Men Operation This feature is used to configure the Star LX007 / IDTECK LX007SR to allow a certain user (e.g. a visitor) to pass the door only when that user is accompanied by another special user (e.g. a guide). Both of the visitor and the guide should be authorized together for access. 4 Level Individual Door Opening Time Setting This feature is used only for setting four different door opening times. Name Display The Star LX007 / IDTECK LX007SR can display the user name when a user gains access. Function Key Name Display You can assign names for each function key via software. Using this feature, for example, you can give certain keys names like punch-in and punch-out and tell the employees to press one of the function keys according to the nature of their access prior to each access attempt. This way, you will be able to identify punch-in and punch-out events on the software.
Download:
Mirror Download [FCC.gov]
Document ID948884
Application IDxA3Mo3roGKa7sqqPNZOD+g==
Document DescriptionUser Manual 1 2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize389.36kB (4867008 bits)
Date Submitted2008-05-30 00:00:00
Date Available2008-05-30 00:00:00
Creation Date2008-05-30 08:28:22
Producing SoftwareAcrobat Distiller 8.0.0 (Windows)
Document Lastmod2008-05-30 08:28:36
Document TitleMicrosoft Word - LX007_English-071001_.doc
Document CreatorPScript5.dll Version 5.2
Document Author: Sunny Hwang
FCC ID Filing: OYULX007

Navigation menu