ION Audio IUL20 Remote For Projected LED Fog Machine Product User Manual 1

ION Audio, LLC Remote For Projected LED Fog Machine Product Users Manual 1

Contents

Users Manual-1

Quickstart Guide English ( 3 – 9 )
Guía de inicio rápido Español ( 10 – 16 )
Guide d’utilisation rapide Français ( 17 – 23 )
Guida rapida Italiano ( 24 – 30 )
Schnellstart-Anleitung Deutsch ( 31 – 37 )
Snelstartgids Nederlands ( 38 – 44 )
Appendix English ( 46 )
2
3
Quickstart Guide (English)
Introduction
Thank you for purchasing the Party Ball Fogger. At ION, your entertainment is as important to
us as it is to you. That’s why we design our products with one thing in mind—to make your life
more fun and more convenient.
Box Contents
Party Ball Fogger
Fog Fluid (32 oz)
Wireless Remote Control
Quickstart Guide
Safety & Warranty Manual
Support
For the latest information about this product (documentation, technical specifications, system
requirements, compatibility information, etc.) and product registration, visit ionaudio.com.
For additional product support, visit ionaudio.com/support.
4
Saftey Notes
Important: In addition to the notes throughout this manual, please refer to the included safety
& warranty manual for additional safety information.
• Carry this product by the handles only. Do not shake it.
• Use this product indoors only. To prevent risk of fire or shock, do not expose this product
to rain or direct and excessive moisture.
• If the environment is significantly colder than the temperature of this product, you may
need to wait for it to adjust to the ambient temperature when you power it on.
• Do not use this product for permanent installations.
• Connect this product to grounded and protected circuits only.
• Always disconnect it from its power source before cleaning it or replacing the fuse.
Replace the fuse with another of the same type and rating.
• Do not clean it with solvents or harsh detergents. Use a soft, clean cloth.
• Before connecting the product to a power source, make sure the power cable is not
crimped or damaged.
• Make sure the power outlet’s voltage is within the range stated on this product (on its
housing or decal).
• Never disconnect this product from the power cable by pulling or tugging on the cable itself.
• Always make sure this product is used in a location with adequate ventilation with at least
20” (50cm) from adjacent surfaces. Make sure none of this product’s ventilation slots are
obstructed.
• Do not use this product at ambient temperatures higher than 104 °F / 40 °C.
• Do not allow flammable materials near this product during use.
• Do not touch this product while it is powered on or immediately after powering it off. The
product and its housing can reach high temperatures.
• If you encounter a serious problem while using this product, stop using it immediately.
• Do not open this product’s housing. It contains no user-serviceable parts and will void
your warranty.
5
Setup
Any item not listed in Introduction > Box Contents is sold separately.
1. After unpacking the box, unscrew and remove the cap at the top of the tank.
2. Fill the tank with a water-based fog fluid (described above).
3. Screw the cap back onto the top of the tank so it is secure. Make sure the tube (that
passes through the cap) is inserted as far into the tank as possible.
4. Connect Party Ball Fogger to a power outlet.
5. On the rear panel, set the Power Switch to the On position. Party Ball Fogger will begin
warming up.
Important: If the environment is significantly colder than the temperature of Party Ball
Fogger, you may need to wait for it to adjust to the ambient temperature.
Additional Safety Notes:
• Do not spray the fog directly toward people or into an open flame.
• Keep Party Ball Fogger at least 3 feet (1 meter) away from other objects, and keep it at
least 10 feet (3 meters) away from flammable materials. The nozzle becomes very hot
during operation, and the machinery requires good ventilation.
• Never touch the nozzle during operation. It becomes very hot; touching it during operation
could result in burns or other injuries.
• Use in well ventilated environment to prevent excessive concentration of vapor.
• Do not use this product as a space heater or humidifier.
6
Features
Front Panel
1. Party Light: This built-in dome party light
projects red, green, blue, white, purple, and
orange colors into fog.
2. Fog Output: This output produces fog after
fog fluid has been entered into the fluid tank.
3. Carrying Handle: Use this handle to easily
transport Party Ball Fogger by hand.
Rear Panel
1. Cap: This cap covers the fluid tank. Twist the
cap clockwise to tighten it or
counterclockwise to loosen it. The tube that
passes through the cap’s center feeds the
fluid in the tank to the heater.
2. Fluid Level Indicator: This transparent part
of the tank shows its current level of fluid. If
this approaches the Low reading, fill the tank
with the recommended water-based fog fluid.
3. Power Cord: Connect this attached power
cord to a power outlet.
4. Power Switch: Use this switch to power
Party Ball Fogger on or off. After powering it
on, wait 2–3 minutes for the heater to warm
up.
5. LED Switch: Use this switch to start or stop
projection of the party lights.
6. Fog Switch: Use this switch to start or stop
production of the fog.
7
Wireless Remote Control
Use the remote control to start/stop the fogger, select individual colors, and power the unit
on/off. To use the remote conrol, point it at the front sensor on the dome light and press the
button of the option you would like to select. See below for button descriptions.
Note: Before using the remote control for the first time, pull out the tab attached to the battery
compartment. To change the remote control battery, follow the diagram located on the back
of the remote control. Use a 3V DC CR2025 lithium button cell battery for replacement.
• Power: Turns on the unit or puts it to sleep (all
lights, the fogger, and the motor go off).
• Fog: Starts or stops the fogger.
• Fade: See the Operation > Light Modes
section for Mode details.
• Flash: See the Operation > Light Modes
section for Mode details.
• Spin: See the Operation > Light Modes
section for Mode details.
• All On/Off: Switches all colors on or off.
• R On/Off: Switches the red color on or off.
• G On/Off: Switches the green color on or off.
• B On/Off: Switches the blue color on or off.
• W On/Off: Switches the white color on or off.
• P On/Off: Switches the purple color on or off.
• O On/Off: Switches the orange color on or off.
• R Only: Switches only the red color on.
• G Only: Switches only the green color on.
• B Only: Switches only the blue color on.
• W Only: Switches only the white color on.
• P Only: Switches only the purple color on.
• O Only: Switches only the orange color on.
8
Operation
Light Modes
Select from one of the light modes using the remote control. Individual color buttons can be
de-selected to have only the colors you want displayed without interrupting the mode.
Fades: Press this button to create fading effects at various speeds. Press this button
repeatedly to cycle through the following different speeds:
• Slow Fade: The colors fade in a sequence slowly from one color to the next with a
transition time of 4-5 seconds. At any time, individual colors can be toggled on or off.
• Medium Fade: The colors fade in a sequence slowly from one color to the next with a
transition time of 3-4 seconds. At any time, individual colors can be toggled on or off.
• Fast Fade: The colors fade in a sequence quickly from one color to the next with a
transition time of 2-3 seconds. At any time, individual colors can be toggled on or off.
• Very Fast Fade: The colors fade in a sequence quickly from one color to the next with a
transition time of 1-2 seconds. At any time, individual colors can be toggled on or off.
Flash: Press this button to create flash effects at various speeds. Press this button repeatedly
to cycle through the following different speeds:
• Slow Flash: The lights will blink on and off for 3 seconds, then switch to a new color
combination abruptly. At any time, individual colors can be toggled on or off.
• Medium Flash: The lights will blink on and off for 1.5 seconds, then switch to a new color
combination abruptly. At any time, individual colors can be toggled on or off.
• Fast Flash: The lights will blink on and off for 0.5 seconds, then switch to a new color
combination abruptly. At any time, individual colors can be toggled on or off.
• Very Fast Flash: The lights will blink on and off for 0.1 seconds, then switch to a new
color combination abruptly. At any time, individual colors can be toggled on or off.
Spin (Motion): When this button is pressed, the motor will cycle through different speeds:
Slow, Medium, Fast, Very Fast, and Off.
9
Fluid
We recommend using high-quality water-based fog fluid with Party Ball Fogger. You can
purchase this from a local or online retailer.
Important:
• Using non-water-based fluids with this product will void its warranty.
• Do not use flammable liquids such as oil, gas, perfume, etc. with this product.
• Do not ingest any of the fluids used in this product. If you do so accidentally, contact a
medical professional immediately. Rinse your eyes and skin thoroughly if they come into
contact with the fluid.
Usage
Throughout operation, make sure there is enough fluid in the tank. Using Party Ball Fogger
without any fluid can damage it.
If Party Ball Fogger is emitting an unusually low amount of fog or making an unusual noise,
power it off immediately. Make sure that the tank has enough fluid and that the fuse is not
damaged.
When you are done using Party Ball Fogger, power Party Ball Fogger off, and wait for about 1
minute for it to cool down.
Important: Depending on the amount of fog generated, this product may set off smoke
detectors. In certain environments after prolonged use, the fog produced may leave a slippery
residue on floors and other surfaces.
Cleaning
We recommend cleaning it after each use to prevent eventual build-up or blockages, which
can result in poor performance, overheating, and damage.
After each use, power Party Ball Fogger off, and wait for about 1 minute for it to cool down.
Wipe its surfaces and empty tank using a soft, clean cloth.
After every 40 hours of use, use Party Ball Fogger as described above (in Setup and Usage),
but use a mixture of 80% distilled water and 20% vinegar instead of the normal fluid. This will
help remove build-up in the nozzle.
Important: Do not clean Party Ball Fogger using solvents or harsh detergents.
46
Appendix (English)
Technical Specifications
Fog Output 262 ft.3/min.
80 m3/min.
Tank Capacity 0.5 L
Fluid Consumption 29 ml/min.
Pre-Heating Time 3 min.
Control Wireless remote control
Lights (6) 6 W
Power Input Voltage 120 VAC, 60 Hz
Connection Attached power cable
Consumption 1000 W, 8.3A @ 120 V, 60 Hz
Fuse 250 V, 12.5 A
Dimensions
(width x depth x height; with
bracket)
8.5” x 12.4” x 10.9”
216 x 316 x 277 mm
Weight Net Weight
3.8 lbs.
1.7 kg
Gross Weight 4.9 lbs.
2.2 kg
Specifications are subject to change without notice.
Trademarks & Licenses
ION Audio is a trademark of ION Audio, LLC, registered in the U.S. and other countries. All other product
names, company names, trademarks, or trade names are those of their respective owners.
47
ionaudio.com
Manual Version 1.0

Navigation menu