Intech Electronics CS8051 BT CF Card User Manual

In Tech Electronics Ltd BT CF Card Users Manual

Users Manual

CS8051 Bluetooth CF Card User Manual CS8051 Bluetooth CF Card is a plug in unit for a Compact Flash host device. It enables you to connect wirelessly to other Bluetooth devices with encryption security. To install the Bluetooth CF card, insert the CF card into the CF card slot on the non-Bluetooth device. Depends on the device application, you may need to restart the device. Now the non-Bluetooth device is become a Bluetooth enabled device and it is ready to transmit and receive wirelessly from another Bluetooth enable device with appropriate profiles. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. To maintain compliance with FCC RF exposure compliance requirements, please avoid direct contact to the transmitting antenna during transmitting. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Navigation menu