Intech Electronics CS8060 Bluetooth Headset User Manual MCB 8059010 0A USE Manual Ab

In Tech Electronics Ltd Bluetooth Headset MCB 8059010 0A USE Manual Ab

Contents

Manual CS8059

25!!!!!Headset in den Pairing Mode (Verbindungsmodus) bringenAnrufe weiterleitenStellen Sie sicher, dass das HS vollkommen aufgeladen und dass das Ladegerät vomHandy getrennt ist, bevor Sie die Verbindung starten. Bei ausgeschaltetem HS 4Sekunden lang S1 gedrückt halten. Die rote und grüne LED-Anzeigen blinkenabwechselnd und signalisieren, dass das HS sich im Pairing Mode befindet.Befolgen Sie die Betriebsanleitungen Ihres Bluetooth-Telefones, um den PairingVorgang zu starten. Normalerweise muss dazu das Setup- oder Verbindungsmenüaufgerufen und dann die Optionen zur Identifikation der Bluetooth Geräte gewähltwerden. Bluetooth braucht einige Sekunden, um eine Verbindung herzustellen.Auf dem Display Ihres Handys erscheint die Meldung, dass das “CS8059” Headsetgefunden wurde und die Frage, ob Sie es registrieren möchten. In diesem Fall müssenSie dies bestätigen. Das Display des Handys fragt Sie nach einen Passcode oder einePIN. Geben Sie die Zahlenfolge von “0000” ein.Wenn die LED-Anzeige des HS alle 3 Sekunden grün blinkt, bedeutet das, dass derVerbindungsvorgang erfolgreich beendet wurde. Normalerweise fragt das Handy, obSie den Namen des Headsets ändern möchten. Wir empfehlen Cs8059 als Namen zubestätigen und nicht zu ändern. Sie können so viele Headsets und Geräte in IhremHandy registrieren, wie Sie möchten. Im Fall, dass der Verbindungsvorgang nicht wievorgesehen abläuft: Schalten Sie das Headset und das Handy aus und warten Sie 10Sekunden. Nun schalten Sie das Headset und das Handy wieder an und wiederholenSie die Schritte Pairing Mode von Anfang an.Wenn Sie einen Anruf erhalten, hören Sie über das HS einen Rufton. Drücken Sie aufS1, beantworten Sie den Anruf. Die grüne LED-Anzeige leuchtet kurz und dannwiederholt auf (jede Sekunde) während der Anruf im Gange ist.(Für Nokia 3650 oder ähnliche Modelle)Sind Sie mit einem Anrufer verbunden, können die Anrufe vom Bluetooth-Telefon aufdas HS und vom HS auf das Bluetooth-Telefon weitergeleitet werden.Um die Anrufe vom Bluetooth-Telefon auf das HS weiterzuleiten: Drücken Sie einmalS1, der Anruf wird auf das HS weitergeleitet.Um einen Anruf vom HS auf das Bluetooth-Telefon weiterzuleiten, folgen Sie demBedienungshandbuch Ihres Handys.Um das Mikrofon während eines aktuellen Gesprächs stumm zu schalten:Drücken Sie S2 und S3 gleichzeitig eine Sekunde lang, das Mikrofon wird stummgeschaltet. Ein unterbrochener Beep-Ton ertönt solange die Stumm-Funktion aktiv ist.Wenn das Mikrophon stumm geschaltet ist, drücken Sie S2 und S3 gleichzeitig, um dieStumm-Funktion zu beenden; der Beep-Ton wird beendet.“”Nach erfolgreicher Verbindung des HS und des Handys wird das Handy “verbinden”anzeigen Dann Wählen Sie “Ja” um die Verbingdung herzustellen Nun sind Siebereit, über das HS Anrufe zu machen oder Anrufe anzunehmen. Für andere Telefoneverwenden Sie die jeweiligen Bedienungshandbücher um die Verbindung herzustellen.Bluetooth-Verbindung herstellenAnrufe annehmenStummschalten des Mikrofons,..Stumm-Funktion beenden!!!!Putting Headset in Pairing ModeEstablishing LinkAnswering Incoming CallsTransferring CallsMuting the microphoneMake sure the HS is fully charged and charging cable disconnected from it beforepairing starts. While the HS is powered off, press and hold S1 for 4 seconds. Redand Green LEDs flashing alternately will indicate that the HS is in Pairing Mode.Follow the operating instructions for your mobile phone to start thepairing process. Typically, this has to be done by going to a setup or connectmenu and then selecting the options to discover devices.may take several seconds to establish a connection.Your phone s display should indicate that it has found the CS8059 headsetand asks if you want to pair it. You should confirm this. The phone s displaywould prompt you for a passkey or PIN. Enter a sequence of 0000 .The headset LED will flash Green every 3 seconds, indicating successful pairing.Usually the phone will also ask whether you want to change the headset s name.We recommend you should approve the Cs8059 name and not change it. Youcan pair as many headsets and devices as you wish in your mobile phone.If pairing does not occur as expected. Turn the headset and phone off and wait for10 seconds. Turn the headset and phone on again and repeat all steps frombeginning.After pairing, the mobile phone will show connect then please select YESto establish the link Now you are ready to make and answer calls on the HSFor other phones please follow the operation manual to establish the linkWhen an incoming call is present, the HS will ring . Pressing S1 will answer thecall. The green LED will continue to flash fast while the call is in session. (Onceevery second)(For Nokia 3650 or equivalent models)When you are in session, calls can be transferred from the phone to theHS and from the HS to the phone.To transfer a call from the phone to the HS: press S1 once, the call willbe transferred to the HS.To transfer a call from HS to the phone, please follow the operatinginstructions of your phone.Pressing both S2 and S3 buttons simultaneously for about a second, themicrophone will be muted. A periodic beep tone will be heard while the mutefunction is active.When the microphone is muted, press on both S2 and S3 buttons simultaneouslywill end the mute function and the periodic beep tone will stop.BluetoothBluetooth BluetoothBluetoothBluetoothBluetoothBluetoothTo mute the microphone during an active callTo end the mute function'“”'“”'“”,“”..,.Bluetooth!7TMCS8059Bluetooth®HeadsetUser Manualhttp://www.abe-hk.comBenutzerhandbuchUser ManualDE1BenutzerhandbuchInhaltAbbildungen des Headsets.....................Laden des Akkus ............................... ................................ ...... .......1Einschalten des Headsets ................................................... ...... ......1Ausschalten des Headsets ................................................... .... .......1Bluetooth-Verbindung herstellen........................................... .... . .......2Anrufe annehmen..................................................................... ........2Anrufe weiterleiten....................................................... .......... ..........2Stummschalten des Mikrofons.............................................. .... . .......2Anrufe beenden............................................................ ......... ..... ....3Anpassen der Hörerlautstärke..............................................................................3Aufladeverbindungsdiagramme.............................. ........5.............................................................1........ .................... .................... ............Headset in den Pairing Mode (Verbindungsmodus) bringen.....................................2... .... ................................ ...................... ............ ........ ............ ....Anruf über Sprachanwahl starten..........................................................................3Wahlwiederholung der letzten Nummer.................................................................3...................................................................................................3.......................................................................................3Anpassen des HS ans Ohr....................................................................................4Trageweise.........................................................................................................4Anzeige Akku leer................................................................................................4.....................................................................................4......................................Voice over Internet Protocol (VoIP) Anwendung.....................................................5Anruf abweisenOhrhaken OrientierungAnschliessen und Laden!!!Laden des AkkusVielen Dank für den Kauf des neuen Abe Headsets. Vor der erstenBenutzung muss der Akku 12 Stunden aufgeladen werden.Bei ausgeschaltetem Headset (HS), 2 Sekunden lang S1 gedrückt halten. Ein leiserTon, gefolgt von einem lauten Ton signalisieren, dass das HS angeschaltet ist. Diegrüne LED-Anzeige leuchtet 2 Sekunden lang auf. Danach blinkt die grüne LED-Anzeige im Abstand von 3 Sekunden.Bei eingeschaltetem HS, 3 Sekunden lang S1 gedrückt halten. Ein lauter Ton, gefolgtvon einem leisen Ton signalisieren, dass das HS ausgeschaltet ist. Daraufhin leuchtetdie rote LED-Anzeige auf bis Sie S1 loslassen.BluetoothCs8059Einschalten des HeadsetsAusschalten des HeadsetsSchlossEin Ausschalter S1-/ ()Leiser Taste S3-()HreröMikrofonOhrbügelLED Anzeige-Lauter Taste (S2)-Anschluss für das LadegerätUser Manual!!Charging the batteryTurning on the HeadsetTurning off the HeadsetThank you for buying new Abe Cs8059 Headset. Before first time use, it isimportant to charge the battery for 12 hours.While the Headset ( HS ) is powered down, press and hold S1 for 2 seconds. A lowtone followed by a high tone will indicate that the HS is powered up. Green LED willturn on for 1 second. Afterward, green LED will flash every 3 seconds.While the HS is powered up, press and hold S1 for 3 seconds. A high tone followedby a low tone will indicate that the HS is powered down. And the LED will keep onRed until S1 is released.Bluetooth!6Headset pictures..............................................................................................................6Charging the battery.........................................................................................................6Turning on the Headset....................................................................................................6Turning off the Headset....................................................................................................6Putting Headset in Pairing Mode......................................................................................7Establishing Link..............................................................................................7Answering incoming calls.................................................................................................7Transferring calls..............................................................................................................7Muting the microphone.....................................................................................................7Ending calls.....................................................................................................................8To make a new call using voice dialing.............................................................................8Redialing last dialed number............................................................................................8Rejecting incoming call.....................................................................................................8Adjusting speaker volume................................................................................................8Ear Hook orientation........................................................................................................8Bend the ear hook to fit your ear.......................................................................................9Putting way.......................................................................................................................9Low-battery indication......................................................................................................9Charging and recharging the battery.................................................................................9Charging Connection Diagrams....................................................................................10Voice Over Internet Protocol (VOIP) Application.............................................................10FCC Interference Statement...........................................................................................11Declaration of Conformity...............................................................................................12BluetoothOn Off S1/()Volume Up (S2)Volume Down S3()LEDDC Socket MicrophoneSpeakerEar hookLock3!!!!!Anrufe beendenAnruf über Sprachanwahl startenWahlwiederholung der letzten NummerUm einen aktuellen Anruf auf dem Headset zu beenden, drücken Sie S1. Danach istder Anruf beendet und die grüne LED-Anzeige blinkt normal.1. Stellen Sie sicher, dass die Sprachanwahl-Funktion im Mobiltelefon korrekteingerichtet ist und dass Sie sich in Reichweite des Headsets befinden. DrückenSie am Headset kurz S1.2. Sprechen Sie nach Ertönen des Pieptons per Sprachanwahl den Namen derbetreffenden Person in das Headset. Der Anruf wird innerhalb weniger Sekundenaufgebaut.1. Stellen Sie sicher, dass die Sprachanwahl-Funktion im Mobiltelefon korrekteingerichtet ist und dass Sie sich in Reichweite des Headsets befinden. Drücken Sieam Headset kurz S1.2. Betätigen Sie nach Ertönen des Pieptons wie gewöhnlich die Sprachanwahl undnach wenigen Sekunden entsteht eine Verbindung.(Für Nokia 3650, Siemens S55, oderähnliche Modelle)Um die letzte gewählte Nummer neu anzuwählen, halten Sie S3 2 Sekundengedrückt. Ein leiser Ton zeigt einen erneuten Wahlversuch an.Während eines Anrufs, drücken Sie kurz auf S2, um die Lautstärke des Hörers aufdem HS zu erhöhen und auf S3, um die Lautstärke zu verringern. Das Erhöhen undVerringern der Lautstärke wird durch einen Ton signalisiert. In jedem Fall ertönt einWarnsignal, wenn das Lautstärkemaximum oder-minimum erreicht wird.Bei Mobiltelefonen mit Bluetooth-Technologie:Wenn Sie ein Mobiltelefon benutzen, das über keine eingebaute Bluetooth-Technologie verfügt oder einen Bluetooth Dongle benötigt:Anruf abweisenAnpassen der Hörerlautstärke(Für Nokia 3650, Siemens S55, oder ähnliche Modelle)Wenn es einen Anruf gibt, den Sie abweisen moechten, druecken Sie bitte den KnopfS1 und halten es bis Sie eine langen Beepton Hoeren, und dann koennen Sie esfreilassen.4!Trageweise!Anpassen des HS ans Ohr1. Befestigen Sie das Headset mit dem Ohrbügel hinter Ihrem Ohr.2. Biegen Sie den Ohrbügel vorsichtig, um ihn an Ihr Ohr anzupassen.Anmerkung:vergewissern Sie sich, dass das Mikrofon zum Mund hin gerichtet ist.!!Anzeige Akku leerDie HS LED-Anzeige blinkt rot anstatt grün, wenn der Akku fast leer ist.Außerdem ertönt alle paar Minuten ein kurzer Signalton. Wenn der Akkuvollkommen leer ist, wird das HS automatisch ausgeschaltet. Es kann solangenicht wieder eingeschaltet werden, bis das Ladegerät angeschlossen oder derAkku ausreichend aufgeladen ist.Um den Akku zu laden verbinden Sie bitte die Ladungskabel mit HS. Waehrendder Ladung blinkt die LED Lampe stabil im Rot. Die Lampe schaltet sich aus wennder Akku voll geladen ist.Anschliessen und LadenAnmerkung: Die Gesprächszeiten des Abe Headsets können je nachHandymodell, variieren und sind daher nur Annaeherungswerte.BluetoothCs8059ACAdaptorAC Mains!Aufladeverbindungsdiagramme(1) A/C AufladenANMERKUNG:BQB, CE und FCC genehmigt.Abe UB 20S USB Dongle und Cs8059 HeadsetVoice over Internet Protocol (VoIP) AnwendungmöglichkeitBluetooth BluetoothAbeDen Abe UB 20S USB Dongle (separater Kauf) in die USB Buchse am PC steckenInstallieren Sie IVT BlueSoleil Bluetooth Applikation von der im UB 20S Paketmitgelieferten CD-ROM. Achtung die CD-ROM ist nicht im Lieferumfang vomCS8059.Download von der entsprechenden Website und installieren von MSN messenger,Netmeeting, Yahoo messenger oder ICQ Anwendungs Software auf den PCPairing: Bringen Sie das Headset CS8059, wie in derBedienungsanleitung des CS8059 beschrieben, in den Pairing-Mode. Starten Siedas Anwenderprogramm BlueSolei und pairen den UB 20S Dongle mit dem CS8059Headset. Die Headset PIN ist 0000 .Verbindungsaufbau und beendigung: Der UB 20S Dongle klingelt das CS8059Headset an. Bitte drücken Sie die Taste S1, um die Verbindungsanfrage zubestätigen. Um die Bluetooth-Verbindung zu beenden drücken Sie die Taste S1erneut. Wenn Sie es wünschen können Sie jetzt das CS8059 Headset mit IhremBluetooth Handy pairen oder wieder verbinden.Überprüfen der Bluetooth-Verbindung: Nachdem der UB 20S Dongle und dasCS8059 Headset miteinander verbunden sind startet der PC automatisch denBluetooth Audio Treiber . Spielen Sie mit Windows Media Player oder einemvergleichbaren Programm Musik von Ihrem PC ab; Sie müßten jetzt die Musik imHeadset hören. Falls dies nicht der Fall sein sollte gehen Sie über das Bedienfeld -> Sound- und Audio Geräteeinstellungen -> Audio -> Klangwiedergabe wählenSie Bluetooth Audio um die Verbindung zu aktivieren.Jetzt können Sie die VoIP Anwendung nutzen und kabellos über Ihr BluetoothHeadset mit Ihren Freunden sprechen.Um das Cs8059 wieder mit Ihrem Blustooth Handy zu verbinden, folgen Sie denPunkten von Headset in den Pairing Mode (Verbindungsmodus) bringen bisHerstellung einer Bluetooth-Verbindung ..Abe“-““““““““Bluetooth””””” ””””,12345678........!Ohrhaken OrientierungUm die Orientierung des Ohrhakens zu aendern folgen Sie bitte die Schritte.(1)Trennen Sie das Haken von dem Telefon los(2)Waehlen Sie die Richtung (links oder rechts) und dann befestigen dasOhrhaken und schliessen es zu.User Manual
11Federal Communication Commission Interference Statement----This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to Part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference in a residentialinstallation. This equipment generates, uses and can radiate radio frequency energyand, if not installed and used in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does causeharmful interference to radio or television reception, which can be determined byturning the equipment off and on, the user is encouraged to try to correct theinterference by one of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that maycause undesired operation.FCC Caution: Any changes or modifications not expressly approved by the partyresponsible for compliance could void the user's authority to operate this equipment.IMPORTANT NOTE:FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for anuncontrolled environment. This equipment should be installed and operated withminimum distance 20cm between the radiator & your body.This transmitter must not be co-located or operating in conjunction with any otherantenna or transmitter.!!Ending CallsTo make a new call using voice dialingRedialing last dialed numberRejecting incoming callAdjusting Speaker VolumeWhile a call is in session on the Headset, pressing S1 will disconnect the call.After the call is disconnected, the green LED will flash normally.1.Make sure the voice dialing function is probably set up in the Mobile phone andit is within the range of the HS. Press S1 on the HS shortly.2.After the beep tone on the HS, make a voice dial as you normally would bysaying the name of the person on the HS. The call will be connected in a fewseconds.1.Make sure the voice dialing function is probably set up in the mobile phone andit is within the range of the HS. Press S1 on the HS shortly.2.After the beep tone on the mobile phone, make a voice dial as you normallywould and the call will be connected in a few seconds.(Support handsfree profile mobile only. For Nokia3650, Siemens S55, or equivalent models)To redial the last dialed number, press and hold S3 for 2 seconds. Short lowtones will indicate an attempt to redial.(Support handsfree profile mobile only. For Nokia3650, Siemens S55, or equivalent models)When there is an incoming call and you want to reject it, press the buttons S1 andhold it until you hear a long beep tone, then release it.While a call is in session pressing and releasing S2 will increase thespeaker volume; pressing and releasing S3 will decrease the speaker volumeon the HS There is a key tone to indicate volume increase or decreaseHowever a warning tone will be heard when the volume level reaches itsmaximum or minimumWhen using a Bluetooth mobile phone:When using a mobile phone without Bluetooth built-in and requiring a Bluetoothdongle:,. .,.!!!!Ear Hook orientationIf you want to change the orientation of ear hook, please follow the following steps.1) Detach the ear hook from the phone2) Select the orientation you want (left or right), and attach the ear hook and lock it8!Bend the ear hook to fit your ear!!Low-battery indicationCharging and recharging the batteryThe HS LED will flash red instead of green when the battery is low.There will also be a short beep every few minutes. When the battery level is toolow, the HSwill automatically power off. It cannot be powered on again unless thecharger is connected.To recharge the battery, connect the charger cable to the HS. During recharging,the LED shows a steady red light.When the battery is fully charged, the indicatorsof red will be off.1. Put on the headset with the ear hook behind your ear.2. Bend the ear hook gently to fit your ear.Notice: Make sure the microphone is pointing towards your mouth.9DISCLAIMER: Talk time and stand-by time of the Abe Cs 059 Headset will varydepending on mobile phone model being usedBluetooth8!Putting wayACAdaptorAC Mains!Charging Connection(1) A/C chargingNOTEBQB CE and FCC approved:,.Abe UB 20S USB Dongle and Abe Cs8059 HeadsetVoice Over Internet Protocol (VOIP) ApplicationBluetooth BluetoothPlug the Abe UB 20S USB Dongle (purchased separately) into the USBsocket of a PC.Install IVT BlueSoleil application from the CD-ROM provided in the UB 20Spackage. Note that the CD-ROM is not available in the CS8059 package.Download from the corresponding websites and install MSN messenger, Netmeeting,Yahoo messenger, or ICQ application software in the PC.Pairing: Put the CS8059 Headset into "pairing" mode by following thesteps in the CS8059 User Manual, start the BlueSoleil application and pair the UB 20SDongle with the CS8059 Headset. The Headset passkey is "0000Connecting and Disconnecting: The UB 20S Dongle will ring the CS8059 Headset.Please press the S1 key on the headset to confirm the connection request. Todisconnect the link, press the S1 key again. You can now pair andreconnect your CS8059 Headset to your mobile phone, if you desire.Testing the Link: After the UB 20S Dongle is paired with the CS8059Headset, the PC audio will be automatically routed to the Audio driver.Play some music on the PC by Windows Media Player or other music applications; youshould be able to hear the music on the Headset. If you can hear it, then go theontrol Panel -> ound and Audio Device Properties -> udio -> ound playbackselect the Audio to activate the link.Now you can start using the VOIP application and talk to your friend through yourheadset wirelessly and freely.Connecting Cs8059 Headset back to your mobile phone. Pleasefollow the steps from 'Putting Headset in Pairing Mode' to Establishing Link'on page 7.BluetoothBluetoothBluetoothBluetoothBluetoothBluetoothluetoothluetoothBluetooth BluetoothBluetoothAbe".""'t"c " "S " "A " "S """'BB101.2.3.4.5.6.7.8.12This equipment complies with FCC radiation exposure limits set forth for an uncontrolledenvironment. End users must follow the specific operating instructions for satisfying RFexposure compliance.This transmitter must not be co-located or operating in conjunction with any otherantenna or transmitter.

Navigation menu