Intel 7260H HP TPN-Q133 User Manual 2

Intel Mobile Communications HP TPN-Q133 2

UserManual.wiki >

Intel >

7260H User Manual >

User Manual 2 HTML Version

User Manual 2

User Guide

Development Company, L.P.

Bluetooth is a trademark owned by its

proprietor and used by Hewlett-Packard

Company under license. Microsoft and

Windows are U.S. registered trademarks of

Microsoft Corporation. SD Logo is a

trademark of its proprietor.

The information contained herein is subject

to change without notice. The only

warranties for HP products and services are

set forth in the express warranty statements

accompanying such products and services.

Nothing herein should be construed as

constituting an additional warranty. HP shall

not be liable for technical or editorial errors

or omissions contained herein.

First Edition: July 2013

Document Part Number: 726517-001

Product notice

This guide describes features that are

common to most models. Some features

may not be available on your computer.

Software terms

By installing, copying, downloading, or

otherwise using any software product

preinstalled on this computer, you agree to

be bound by the terms of the HP End User

License Agreement (EULA). If you do not

accept these license terms, your sole

remedy is to return the entire unused

product (hardware and software) within 14

days for a refund subject to the refund

policy of your place of purchase.

For any further information or to request a

full refund of the computer, please contact

your local point of sale (the seller).

Safety warning notice

WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not

place the computer directly on your lap or obstruct the computer air vents. Use the computer only on

a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft

surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to

come into contact with the skin or a soft surface, such as pillows or rugs or clothing, during operation.

The computer and the AC adapter comply with the user-accessible surface temperature limits defined

by the International Standard for Safety of Information Technology Equipment (IEC 60950).

iii

iv Safety warning notice

Table of contents

1 Starting right ................................................................................................................................................... 1

HP Quick Start ...................................................................................................................................... 1

Best practices ....................................................................................................................................... 1

Fun things to do .................................................................................................................................... 1

More HP resources .............................................................................................................................. 2

2 Getting to know your computer ..................................................................................................................... 3

Finding your hardware and software information ................................................................................. 3

Locating hardware ............................................................................................................... 3

Locating software ................................................................................................................. 3

Tablet edge components ...................................................................................................................... 3

Display .................................................................................................................................................. 6

Keyboard dock ..................................................................................................................................... 7

Top ....................................................................................................................................... 7

TouchPad ............................................................................................................................ 8

Lights ................................................................................................................................... 9

Keys ................................................................................................................................... 10

Right side ........................................................................................................................... 11

Left side ............................................................................................................................. 12

Releasing the tablet from the keyboard dock .................................................................... 13

Locating system information ............................................................................................................... 13

Changing your tablet's settings .......................................................................................................... 14

Changing your tablet's view ............................................................................................... 14

Adjusting your tablet's autorotate lock ............................................................... 14

Adjusting your tablet's screen brightness .......................................................... 14

Using touch screen gestures .............................................................................................................. 15

One-finger slide ................................................................................................................. 15

Tapping .............................................................................................................................. 16

Scrolling ............................................................................................................................. 17

Pinching/stretching ............................................................................................................ 17

Rotating (select models only) ............................................................................................ 18

Edge swipes ...................................................................................................................... 18

Right-edge swipe .............................................................................................. 18

Left-edge swipe ................................................................................................. 19

Top-edge swipe and bottom-edge swipe .......................................................... 19

Setting touch screen preferences ....................................................................................................... 20

Using the on-screen keyboard ........................................................................................................... 20

3 Connecting to a network .............................................................................................................................. 21

Connecting to a wireless network ....................................................................................................... 21

Using the wireless controls ................................................................................................ 21

Using the wireless button .................................................................................. 21

Using operating system controls ....................................................................... 22

Using a WLAN ................................................................................................................... 22

Using an Internet service provider .................................................................... 22

Setting up a WLAN ............................................................................................ 23

Configuring a wireless router ............................................................................ 23

Protecting your WLAN ....................................................................................... 23

Connecting to a WLAN ...................................................................................... 24

Using Bluetooth wireless devices ...................................................................................... 24

4 Enjoying entertainment features ................................................................................................................. 25

Multimedia features ............................................................................................................................ 25

Using the webcam .............................................................................................................................. 28

Using audio ........................................................................................................................................ 28

Connecting speakers .......................................................................................................................... 29

Using Beats Audio .............................................................................................................................. 29

Accessing Beats Audio Control Panel ............................................................................... 29

Enabling and disabling Beats Audio .................................................................................. 29

Checking the sound ............................................................................................................................ 30

Using video ......................................................................................................................................... 31

Connecting an HDMI device .............................................................................................. 31

Configuring HDMI audio settings ...................................................................... 32

Camera .............................................................................................................................. 32

5 Navigating using the keyboard, touch gestures and pointing devices ................................................... 33

Using the TouchPad ........................................................................................................................... 33

Using TouchPad gestures .................................................................................................................. 33

Tapping .............................................................................................................................. 34

Scrolling ............................................................................................................................. 34

Pinching/zooming .............................................................................................................. 35

Rotating (select models only) ............................................................................................ 35

Flicking (select models only) .............................................................................................. 36

Edge swipes ...................................................................................................................... 36

Right-edge swipe .............................................................................................. 37

Top-edge swipe ................................................................................................. 37

Left-edge swipe ................................................................................................. 38

Using the keyboard and mouse .......................................................................................................... 38

Using the keys ................................................................................................................... 38

Using the action keys ........................................................................................ 38

Using Microsoft Windows 8 shortcut keys ......................................................... 40

Using the hot keys ............................................................................................. 41

6 Managing power ............................................................................................................................................ 42

Initiating Sleep and Hibernation ......................................................................................................... 42

Initiating and exiting Sleep ................................................................................................. 42

Enabling and exiting Hibernation (select models only) ...................................................... 43

Setting password protection on wakeup ............................................................................................. 43

Using the power meter and power settings ........................................................................................ 44

Running on battery power .................................................................................................................. 44

Factory-sealed battery ....................................................................................................... 44

Finding battery information ................................................................................................ 44

Conserving battery power .................................................................................................. 45

Identifying low battery levels .............................................................................................. 45

Resolving a low battery level ............................................................................................. 45

Resolving a low battery level when external power is available ........................ 45

Resolving a low battery level when no power source is available ..................... 45

Resolving a low battery level when the computer cannot exit Hibernation ....... 45

Running on external AC power .......................................................................................................... 46

Shutting down (turning off) the computer ........................................................................................... 46

7 Managing and sharing information ............................................................................................................. 48

Using a USB device ........................................................................................................................... 48

Connecting a USB device .................................................................................................. 48

Removing a USB device .................................................................................................... 49

Connecting a powered USB device ................................................................................... 49

Inserting and removing a memory card .............................................................................................. 50

8 Maintaining your computer .......................................................................................................................... 51

Improving performance ...................................................................................................................... 51

Using Disk Cleanup ........................................................................................................... 51

Updating programs and drivers .......................................................................................................... 51

Cleaning your computer ..................................................................................................................... 51

Cleaning products .............................................................................................................. 51

Cleaning procedures .......................................................................................................... 52

Cleaning the display .......................................................................................... 52

vii

Cleaning the sides and cover ............................................................................ 52

Cleaning the TouchPad, keyboard, or mouse ................................................... 52

Traveling with or shipping your computer ........................................................................................... 53

9 Securing your computer and information .................................................................................................. 54

Using passwords ................................................................................................................................ 54

Setting Windows passwords .............................................................................................. 55

Setting Setup Utility (BIOS) passwords ............................................................................. 55

Using Internet security software ......................................................................................................... 55

Using antivirus software ..................................................................................................... 56

Using firewall software ....................................................................................................... 56

Installing software updates ................................................................................................................. 56

Installing Windows updates ............................................................................................... 56

Installing HP and third-party software updates .................................................................. 57

Securing your wireless network .......................................................................................................... 57

Backing up your software applications and information ..................................................................... 57

10 Using Setup Utility (BIOS) and System Diagnostics ............................................................................... 58

Starting Setup Utility (BIOS) ............................................................................................................... 58

Updating the BIOS ............................................................................................................................. 58

Determining the BIOS version ........................................................................................... 58

Downloading a BIOS update ............................................................................................. 59

Using HP PC Hardware Diagnostics (UEFI) ...................................................................................... 59

Downloading HP PC Hardware Diagnostics (UEFI) to a USB device ............................... 60

11 Backing up, restoring, and recovering ..................................................................................................... 61

Creating recovery media and backups ............................................................................................... 61

Creating HP Recovery media ............................................................................................ 62

Restore and recovery ......................................................................................................................... 63

Using Windows Refresh for quick and easy recovery ....................................................... 63

Remove everything and reinstall Windows ........................................................................ 64

Recovering using HP Recovery Manager .......................................................................... 65

What you need to know ..................................................................................... 65

Using the HP Recovery partition ....................................................................... 65

Using HP Recovery media to recover ............................................................... 66

Changing the computer boot order ................................................................... 66

Removing the HP Recovery partition ................................................................................. 67

12 Specifications .............................................................................................................................................. 68

Input power ......................................................................................................................................... 68

viii

Operating environment ....................................................................................................................... 68

13 Electrostatic Discharge .............................................................................................................................. 69

Index ................................................................................................................................................................... 70

1 Starting right

This computer is a powerful tool designed to enhance your work and entertainment. Read this

chapter to learn about best practices after setup, fun things to do with your computer, and where to

get more HP resources.

HP Quick Start

HP Quick Start gives you the option to use the familiar Start menu from the Windows desktop. Quick

Start functions like the traditional Windows Start menu and enables you to conveniently open files

and programs using the Windows desktop.

●To open HP Quick Start from the Windows desktop, click the HP Quick Start icon on the

taskbar.

Best practices

To get the most out of your smart investment, after you set up and register the computer, we

recommend the following steps:

●Take a minute to browse the printed Windows 8 Basics guide to explore the new Windows®

features.

●If you haven’t already done so, connect to a wired or wireless network. See details in Connecting

to a network on page 21.

●Become familiar with the computer hardware and software. Go to Getting to know your computer

on page 3 and Finding your hardware and software information on page 3 for information.

●Back up your computer. See Backing up, restoring, and recovering on page 61.

Fun things to do

●You know that you can watch a YouTube video on the computer. But did you know that you can

also connect your computer to a television or gaming console? For more information, see

Connecting an HDMI device on page 31.

●You know you can listen to music on the computer. But did you know that you can also stream

live radio to the computer and listen to music or talk radio from all over the world? See Using

audio on page 28.

●Experience music the way the artist intended, with deep, controlled bass and clear, pure sound.

See Using Beats Audio on page 29.

●Use the TouchPad and the new Windows 8 touch gestures for smooth control of images and

pages of text. See Using TouchPad gestures on page 33 and Using touch screen gestures

on page 15.

HP Quick Start 1

More HP resources

You have already used Setup Instructions to turn on the computer and locate this guide. To locate

resources that provide product details, how-to information, and more, use the information in this table.

Resource Contents

Setup Instructions ●Overview of computer setup and features

Windows 8 Basics guide ●Overview of using and navigating with Windows 8

Help and Support

To access Help and Support, from the Start screen,

type h, and then select Help and Support. For U.S.

support, go to http://www.hp.com/go/contactHP. For

worldwide support, go to http://welcome.hp.com/

country/us/en/wwcontact_us.html.

●A broad range of how-to information and troubleshooting tips

Safety & Comfort Guide

To access this guide, from the Start screen, type

support, select the HP Support Assistant app,

select My computer, and then select User guides, or

go to http://www.hp.com/ergo.

●Proper workstation setup

●Guidelines for posture and work habits that increase your

comfort and decrease your risk of injury

●Electrical and mechanical safety information

Worldwide support web page

To get support in your language, go to

http://welcome.hp.com/country/us/en/

wwcontact_us.html.

●Online chat with an HP technician

●Email support

●Support telephone numbers

●Locate HP service center locations

Regulatory, Safety and Environmental Notices

To access this guide, from the Start screen, type

support, select the HP Support Assistant app,

select My computer, and then select User guides.

●Important regulatory notices

Limited Warranty*

To access this guide, from the Start screen, type

support, select the HP Support Assistant app,

select My computer, and then select Warranty and

services, or go to http://www.hp.com/go/

orderdocuments.

●Specific warranty information about this computer

*You can find the expressly provided HP Limited Warranty applicable to your product located with the user guides on your

computer and/or on the CD/DVD provided in the box. In some countries/regions, HP may provide a printed HP Limited

Warranty in the box. For countries/regions where the warranty is not provided in printed format, you may request a printed

copy from http://www.hp.com/go/orderdocuments or write to:

●North America: Hewlett-Packard, MS POD, 11311 Chinden Blvd., Boise, ID 83714, USA

●Europe, Middle East, Africa: Hewlett-Packard, POD, Via G. Di Vittorio, 9, 20063, Cernusco s/Naviglio (MI), Italy

●Asia Pacific: Hewlett-Packard, POD, P.O. Box 200, Alexandra Post Office, Singapore 911507

When you request a printed copy of your warranty, please include your product number, warranty period (found on your

service label), name, and postal address.

IMPORTANT: Do NOT return your HP product to the addresses above. For U.S. support, go to http://www.hp.com/go/

contactHP. For worldwide support, go to http://welcome.hp.com/country/us/en/wwcontact_us.html.

2 Chapter 1 Starting right

2 Getting to know your computer

Finding your hardware and software information

Locating hardware

To find out what hardware is installed on your computer:

1. From the Start screen, type c, and then select Control Panel.

2. Select System and Security, and then in the System area, click Device Manager.

A list reveals all the devices installed on your computer.

Locating software

To find out what software is installed on your computer:

1. From the Start screen, right-click using the mouse

– or –

Swipe from the top of the TouchPad to reveal all apps.

2. Select the All apps icon.

Tablet edge components

Finding your hardware and software information 3

Components Description

(1) Power button ●When the computer is off, press the button to turn on

the tablet.

●When the computer is on, press the button briefly to

initiate Sleep.

●When the computer is in the Sleep state, press the

button briefly to exit Sleep.

CAUTION: Pressing and holding down the power button

results in the loss of unsaved information.

NOTE: If the computer has stopped responding and

Microsoft® Windows shutdown procedures are ineffective,

press and hold the power button down for at least 5

seconds to turn off the tablet.

Swipe from the right edge of the TouchPad or

touch screen to display the charms, tap Search, and then

tap the search box. In the search box, type power, tap

Settings, and then tap Power options, or see Managing

power on page 42.

– or –

To learn more about your power settings, on the

Start screen, type p. In the search box, type power, select

Settings, and then select Power options, or see

Managing power on page 42.

(2) Alignment post connectors (2) Align and attach the tablet to the keyboard dock.

(3) Power connector Connects an AC adapter.

(4) AC adapter/Battery light ●White: The AC adapter is connected and the battery

is charged.

●Blinking white: The battery has reached a low battery

level.

●Amber: The AC adapter is connected and the battery

is charging.

●Off: The computer is using DC power.

(5) Docking port Connects the tablet to the keyboard dock.

4 Chapter 2 Getting to know your computer

Components Description

(6) Audio-out (headphone) jack/Audio-in

(microphone) jack

Connects optional powered stereo speakers, headphones,

earbuds, a headset, or a television audio cable.

WARNING! To reduce the risk of personal injury, adjust

the volume before using headphones, earbuds, or a

headset. For additional safety information, see the

Regulatory, Safety and Environmental Notices.

NOTE: When a device is connected to the jack, the

computer speakers are disabled.

NOTE: Be sure that the device cable has a 4-conductor

connector that supports both audio-out (headphone) and

audio-in (microphone).

NOTE: Stand-alone microphones and headphones with

separate microphone jacks are not supported.

(7) Micro SD memory card reader Supports micro Secure Digital (SD) memory cards.

(8) Vent Enables airflow to cool internal components.

NOTE: The computer fan starts up automatically to cool

internal components and prevent overheating. It is normal

for the internal fan to cycle on and off during routine

operation.

(9) Volume button Controls speaker volume on the tablet.

●To increase speaker volume, press the + edge of the

button.

●To decrease speaker volume, press the – edge of the

button.

(10) Vent Enables airflow to cool internal components.

NOTE: The computer fan starts up automatically to cool

internal components and prevent overheating. It is normal

for the internal fan to cycle on and off during routine

operation.

Tablet edge components 5

Display

Component Description

(1) WLAN antennas (2)* Send and receive wireless signals.

(2) Internal microphones (2) Record audio, automatically filtering out the noise around you and

cancelling echoes.

(3) Webcam light On: The webcam is on.

(4) Webcam Records video and captures photographs. Some models may allow

you to video conference and chat online using streaming video.

Swipe from the right edge of the TouchPad or touch screen

to display the charms, tap Search, and then tap the search box. Type

c, and then tap CyberLink YouCam from the list of applications.

– or –

From the Start screen, type c, and then select CyberLink

YouCam from the list of applications.

(5) Ambient light sensor Automatically adjusts the display brightness based on the lighting

conditions in your environment.

(6) Speakers (2) Produce sound.

(7) Windows button Returns you to the Start screen from an open app or the Windows

desktop.

NOTE: Pressing the Windows button again returns you to the

previous screen.

*The antennas are not visible from the outside of the computer. For optimal transmission, keep the areas immediately

around the antennas and proximity sensors free from obstructions. For wireless regulatory notices, see the section of the

Regulatory, Safety, and Environmental Notices that applies to your country or region.

6 Chapter 2 Getting to know your computer

Keyboard dock

Top

Component Description

(1) Alignment posts Align and attach the tablet to the keyboard dock.

(2) Release latch Releases the tablet from the keyboard dock. To

release the tablet, slide the release latch to the left.

(3) Docking connector Connects the tablet to the keyboard dock.

Keyboard dock 7

TouchPad

Component Description

(1) TouchPad zone Reads your finger gesture to move the pointer or activate

items on the screen.

(2) Left TouchPad button Functions like the left button of an external mouse.

(3) Right TouchPad button Functions like the right button on an external mouse.

8 Chapter 2 Getting to know your computer

Lights

Component Description

(1) Caps lock light ●White: Caps lock is on.

●Off: Caps lock is off.

(2) Mute light ●Amber: Computer sound is off.

●Off: Computer sound is on.

(3) Wireless light ●White: An integrated wireless device, such as a

wireless local area network (WLAN) device and/or a

Bluetooth® device, is on.

●Amber: All wireless devices are off.

Keyboard dock 9

Keys

Component Description

(1) esc key Displays system information when pressed in combination with the

fn key.

(2) fn key Displays system information when pressed in combination with the

esc key, and enables or disables Beats Audio when pressed in

combination with the fn key.

(3) Windows key Returns you to the Start screen from an open app or the Windows

desktop.

NOTE: Pressing the Windows key again returns you to the

previous screen.

(4) b key Enables or disables Beats Audio when pressed in combination with

the fn key.

(5) Action keys Execute frequently used system functions.

NOTE: Action keys do not display or function from the on-screen

tablet keyboard.

10 Chapter 2 Getting to know your computer

Right side

Component Description

(1) USB 3.0 port Connects an optional USB device.

NOTE: For details about different types of USB ports, see Using

a USB device on page 48.

(1) HDMI port Connects an optional video or audio device, such as a high-

definition television, any compatible digital or audio component, or

a high-speed HDMI device.

(3) Power connector Connects an AC adapter.

(4) AC adapter/Battery light ●White: The AC adapter is connected and the battery is

charged.

●Blinking white: The battery has reached a low battery level.

●Amber: The AC adapter is connected and the battery is

charging.

●Off: The computer is using battery power.

Keyboard dock 11

Left side

Component Description

(1) USB 2.0 port Connects an optional USB device.

NOTE: For details about different types of USB ports, see

Using a USB device on page 48.

(2) Audio-out (headphone) jack/Audio-in

(microphone) jack

Connects optional powered stereo speakers, headphones,

earbuds, a headset, or a television audio cable. Also connects

an optional headset microphone.

WARNING! To reduce the risk of personal injury, adjust the

volume before using headphones, earbuds, or a headset. For

additional safety information, see the Regulatory, Safety and

Environmental Notices.

NOTE: When a device is connected to the jack, the computer

speakers are disabled.

NOTE: Be sure that the device cable has a 4-conductor

connector that supports both audio-out (headphone) and audio-

in (microphone).

NOTE: Stand-alone microphones and headphones with

separate microphone jacks are not supported.

(3) Memory card reader Reads data from and writes data to memory cards such as SD.

12 Chapter 2 Getting to know your computer

Releasing the tablet from the keyboard dock

To release the tablet from the keyboard dock, follow these steps:

1. Slide the release latch on the keyboard dock to the left (1).

2. Lift and remove the tablet (2).

Locating system information

Important system information is located on the bottom edge of the tablet. You may need the

information when travelling internationally or when you contact support:

●Serial number

●Product number

●Warranty period

●Regulatory and wireless certification information

Using Windows, briefly press the fn+esc key combination to display the System Information screen,

which provides the product name and serial number of your computer, as well as information about

the memory, processor, BIOS, and keyboard.

Locating system information 13

Changing your tablet's settings

You can change view and screen brightness.

Changing your tablet's view

Your tablet's orientation, or view, changes automatically from landscape to portrait view, or from

portrait to landscape view.

1. To change the view of your tablet from landscape view to portrait view:

Hold the tablet vertically, and then turn it 90 degrees to the right (in a clockwise direction).

2. To change the view of your tablet from portrait view to landscape view:

Hold the tablet vertically, and then turn it 90 degrees to the left (in a counter-clockwise direction).

Adjusting your tablet's autorotate lock

To adjust your tablet's autorotate lock when the tablet is undocked:

1. Swipe from the right edge of the TouchPad or touch screen to display the charms, and then tap

Settings.

2. Tap the Screen icon at the bottom right. Tap the Autorotate Lock icon to lock your current

tablet screen in place and to prevent rotation. The icon displays a lock symbol when autorotate

lock is active. To turn off the autorotate lock, tap the Autorotate Lock icon again.

Adjusting your tablet's screen brightness

To adjust the screen brightness:

1. Swipe from the right edge of the TouchPad or touch screen to display the charms, and then tap

Settings.

2. Tap the Screen icon at the bottom right. A vertical slider displays that controls the screen

brightness.

NOTE: From the Windows desktop, you can also tap the Power Meter icon in the notification area

at the far right of the taskbar, tap Adjust screen brightness, and then move the slider next to

Screen brightness at the bottom of the screen.

14 Chapter 2 Getting to know your computer

Using touch screen gestures

A touch screen computer allows you to control items on the screen directly with your fingers.

TIP: On touch screen computers, you can perform the gestures on the screen or on the TouchPad.

You can also perform on-screen actions with the keyboard and mouse.

One-finger slide

The one-finger slide is mostly used to pan or scroll through lists and pages, but you can use it for

other interactions, too, such as moving an object.

●To scroll across the screen, lightly slide one finger across the screen in the direction you want to

move.

NOTE: When many apps are displayed on the Start screen, you can slide your finger to move

the screen left or right.

●To drag, press and hold an object, and then drag the object to move it.

Using touch screen gestures 15

Tapping

To make an on-screen selection, use the tap function.

●Use one finger to tap an object on the screen to make a selection. Double-tap an item to open it.

NOTE: Press and hold your finger on an object to open a help screen that provides

information about the object.

16 Chapter 2 Getting to know your computer

Scrolling

Scrolling is useful for moving the pointer up, down, left, or right on a page or image.

●Place two fingers on the screen and then drag them in an up, down, left, or right motion.

Pinching/stretching

Pinching and stretching allows you to zoom out or in on images or text.

●Zoom in by placing two fingers together on the display and then move your fingers apart.

●Zoom out by placing two fingers apart on the display and then move your fingers together.

Using touch screen gestures 17

Rotating (select models only)

Rotating allows you to turn items such as photos.

●Anchor the forefinger of your left hand on the object you want to rotate. Using your right hand,

slide your forefinger around in a sweeping motion from 12 o’clock to 3 o’clock. To reverse the

rotation, move your forefinger from 3 o’clock to 12 o’clock.

NOTE: Rotate is intended for specific apps where you can manipulate an object or image. Rotate

may not be functional for all apps.

Edge swipes

With edge swipes you can perform tasks such as changing settings and finding or using apps.

Right-edge swipe

The right-edge swipe reveals the charms, which let you search, share, start apps, access devices, or

change settings.

●Gently swipe your finger inward from the right edge of the display bezel onto the screen to

display the charms.

18 Chapter 2 Getting to know your computer

Left-edge swipe

The left-edge swipe accesses your recently opened apps so that you can switch between them

quickly.

●Gently swipe your finger inward from the left edge of the display bezel to switch between

recently-opened apps.

●Without lifting your finger, swipe back toward the left edge to display all recently opened apps.

Top-edge swipe and bottom-edge swipe

The top-edge swipe or bottom-edge swipe allows you to open a list of apps available on your

computer.

1. Gently swipe finger from the top edge or the bottom edge of the display bezel onto the screen.

2. Tap All apps to view available apps.

Using touch screen gestures 19

Setting touch screen preferences

Mode Steps

1. Swipe from the right edge of the TouchPad or touch screen to display the charms, tap

Search, and then tap the search box.

2. Type c, tap Control Panel, tap Hardware and Sound, tap Pen and Touch, and then follow

the on-screen instructions.

1. On the Start screen, type c, and then select Control Panel.

2. Select Hardware and Sound, select Pen and Touch, and then follow the on-screen

instructions.

These preferences are specific to the touch screen and the computer.

Using the on-screen keyboard

You may want to enter data into a data field. This may be required when you set up a wireless

network configuration or a weather reporting location, or when you access user accounts on Internet

sites. The computer has an on-screen keyboard that is displayed when you need to enter such

information.

1. To display the keyboard, tap in the first data field. Tap the small keyboard icon that is displayed.

– or –

Tap the keyboard icon on the right side of the notification area.

2. To enlarge the size of the on-screen keyboard, tap the lower-right corner and drag it to the

desired size.

3. Tap each character, continuing until you have spelled out the name or word that you are

entering into the data field.

NOTE: Action keys do not display or function on the on-screen keyboard.

NOTE: Suggested words may be displayed at the top of the on-screen keyboard. If an

appropriate word is displayed, tap it to select it.

4. Tap enter on the keyboard.

20 Chapter 2 Getting to know your computer

3 Connecting to a network

Your computer can travel with you wherever you go. But even at home, you can explore the globe

and access information from millions of websites using your computer and a wired or wireless

network connection. This chapter will help you get connected to that world.

Connecting to a wireless network

Wireless technology transfers data across radio waves instead of wires. Your computer may be

equipped with one or more of the following wireless devices:

●Wireless local area network (WLAN) device—Connects the computer to wireless local area

networks (commonly referred to as Wi-Fi networks, wireless LANs, or WLANs) in corporate

offices, your home, and public places such as airports, restaurants, coffee shops, hotels, and

universities. In a WLAN, the mobile wireless device in your computer communicates with a

wireless router or a wireless access point.

●Bluetooth device—Creates a personal area network (PAN) to connect to other Bluetooth-

enabled devices such as computers, phones, printers, headsets, speakers, and cameras. In a

PAN, each device communicates directly with other devices, and devices must be relatively

close together—typically within 10 meters (approximately 33 feet) of each other.

For more information about wireless technology, see the information and website links provided in

Help and Support. From the Start screen, type h, and then select Help and Support.

Using the wireless controls

You can control the wireless devices in your computer using these features:

●Wireless button, wireless switch, or wireless key (referred to in this chapter as the wireless

button) (select models only)

●Operating system controls

Using the wireless button

The computer has a wireless button, one or more wireless devices, and one or two wireless lights,

depending on the model. All of the wireless devices on your computer are enabled at the factory, so

the wireless light is on (white) when you turn on the computer.

The wireless light indicates the overall power state of your wireless devices, not the status of

individual devices. If the wireless light is white, at least one wireless device is on. If the wireless light

is off, all wireless devices are off.

NOTE: On some models, the wireless light is amber when all wireless devices are off.

Because the wireless devices are enabled at the factory, you can use the wireless button to turn on or

turn off the wireless devices simultaneously.

Connecting to a wireless network 21

Using operating system controls

The Network and Sharing Center allows you to set up a connection or network, connect to a network,

and diagnose and repair network problems.

To use operating system controls:

Mode Steps

1. Swipe from the right edge of the TouchPad or touch screen to display the charms, tap

Search, and then tap the search box.

2. Type network and sharing in the search box, and then tap Settings.

3. Tap Network and Sharing Center.

1. From the Start screen, type network and sharing, and then select Settings.

2. Select Network and Sharing Center.

For more information, from the Start screen, type h, and then select Help and Support.

Using a WLAN

With a WLAN device, you can access a wireless local area network (WLAN), which is composed of

other devices and accessories that are linked by a wireless router or a wireless access point.

NOTE: The terms wireless router and wireless access point are often used interchangeably.

●A large-scale WLAN, such as a corporate or public WLAN, typically uses wireless access points

that can accommodate a large number of devices and accessories and can separate critical

network functions.

●A home or small office WLAN typically uses a wireless router, which allows several wireless and

wired devices to share an Internet connection, a printer, and files without requiring additional

pieces of hardware or software.

To use the WLAN device in your computer, you must connect to a WLAN infrastructure (provided

through a service provider or a public or corporate network).

Using an Internet service provider

When you are setting up Internet access in your home, you must establish an account with an

Internet service provider (ISP). To purchase Internet service and a modem, contact a local ISP. The

ISP will help set up the modem, install a network cable to connect your wireless router to the modem,

and test the Internet service.

NOTE: Your ISP will give you a user ID and a password to use for Internet access. Record this

information and store it in a safe place.

22 Chapter 3 Connecting to a network

Setting up a WLAN

To set up a WLAN and connect to the Internet, you need the following equipment:

●A broadband modem (either DSL or cable) (1) and high-speed Internet service purchased from

an Internet service provider

●A wireless router (2) (purchased separately)

●A wireless computer (3)

NOTE: Some modems have a built-in wireless router. Check with your ISP to determine what type

of modem you have.

The illustration below shows an example of a wireless network installation that is connected to the

Internet.

As your network grows, additional wireless and wired devices can be connected to the network to

access the Internet.

For help in setting up your WLAN, see the information provided by your router manufacturer or your

ISP.

Configuring a wireless router

For help in setting up a WLAN, see the information provided by your router manufacturer or your ISP.

NOTE: It is recommended that you initially connect your new wireless device to the router by using

the network cable provided with the router. When the device successfully connects to the Internet,

disconnect the cable, and access the Internet through your wireless network.

Protecting your WLAN

When you set up a WLAN or access an existing WLAN, always enable security features to protect

your network from unauthorized access. WLANs in public areas (hotspots) like coffee shops and

airports may not provide any security. If you are concerned about the security of your device when

connected to a hotspot, limit your network activities to email that is not confidential and basic Internet

surfing.

Wireless radio signals travel outside the network, so other WLAN devices can pick up unprotected

signals. Take the following precautions to protect your WLAN:

●Use a firewall.

A firewall checks both data and requests for data that are sent to your network, and discards any

suspicious items. Firewalls are available in both software and hardware. Some networks use a

combination of both types.

●Use wireless encryption.

Wireless encryption uses security settings to encrypt and decrypt data that is transmitted over

the network. For more information, from the Start screen, type h, and then select Help and

Support.

Connecting to a wireless network 23

Connecting to a WLAN

To connect to the WLAN, follow these steps:

1. Be sure that the WLAN device is on.

2. From the Windows desktop, tap or click the network status icon in the notification area, at the far

right of the taskbar.

3. Select your WLAN from the list.

4. Click Connect.

5. If the WLAN is a security-enabled WLAN, you are prompted to enter a security code. Type the

code, and then click OK to complete the connection.

NOTE: If no WLANs are listed, you may be out of range of a wireless router or access point.

NOTE: If you do not see the WLAN you want to connect to, from the Windows desktop, right-

click the network status icon, and then select Open Network and Sharing Center. Click Set up

a new connection or network. A list of options is displayed, allowing you to manually search

for and connect to a network or to create a new network connection.

After the connection is made, place the mouse pointer over the network status icon in the notification

area, at the far right of the taskbar, to verify the name and status of the connection.

NOTE: The functional range (how far your wireless signals travel) depends on WLAN

implementation, router manufacturer, and interference from other electronic devices or structural

barriers such as walls and floors.

Using Bluetooth wireless devices

A Bluetooth device provides short-range wireless communications that replace the physical cable

connections that traditionally link electronic devices such as the following:

●Computers (desktop, notebook, PDA)

●Phones (cellular, cordless, smart phone)

●Imaging devices (printer, camera)

●Audio devices (headset, speakers)

●Mouse

Bluetooth devices provide peer-to-peer capability that allows you to set up a personal area network

(PAN) of Bluetooth devices. For information about configuring and using Bluetooth devices, see the

Bluetooth software Help.

24 Chapter 3 Connecting to a network

4 Enjoying entertainment features

Use your HP computer as an entertainment hub to socialize via the webcam, enjoy and manage your

music, and download and watch movies. Or, to make your computer an even more powerful

entertainment center, connect external devices like a monitor, projector, or television, or speakers

and headphones.

Multimedia features

Here are some of the entertainment features on your computer.

Multimedia features 25

Component Description

(1) Audio-out (headphone) jack/Audio-in

(microphone) jack

Connects optional powered stereo

speakers, headphones, earbuds, a

headset, or a television audio cable.

Also connects an optional headset

microphone.

WARNING! To reduce the risk of

personal injury, adjust the volume before

using headphones, earbuds, or a

headset. For additional safety

information, see the Regulatory, Safety

and Environmental Notices.

NOTE: When a device is connected to

the jack, the computer speakers are

disabled.

NOTE: Be sure that the device cable

has a 4-conductor connector that

supports both audio-out (headphone)

and audio-in (microphone).

NOTE: Stand-alone microphones and

headphones with separate microphone

jacks are not supported.

(2) Volume button Controls speaker volume.

●To increase speaker volume, press

the + edge of the button.

●To decrease speaker volume, press

the – edge of the button.

26 Chapter 4 Enjoying entertainment features

Component Description

(1) Internal microphones (2) Record sound.

(2) Webcam light On: The webcam is in use.

(3) Webcam Records video and captures photographs.

Some models may allow you to video

conference and chat online using streaming

video.

Swipe from the right edge of the

TouchPad or touch screen to display the

charms, tap Search, and then tap the

search box. type c, and then tap CyberLink

YouCam from the list of applications.

– or –

From the Start screen, type c,

and then select CyberLink YouCam from

the list of applications.

(4) Ambient light sensor Automatically adjusts the display brightness

based on the lighting conditions in your

environment.

(5) Speakers (2) Produce sound.

(6) HDMI port Connects an optional video or audio device,

such as a high-definition television, any

compatible digital or audio component, or a

high-speed HDMI device.

(7) USB 3.0 port Connects an optional USB device.

NOTE: For details about different types of

USB ports, see Using a USB device

on page 48.

(8) b key Enables or disables Beats Audio when

pressed in combination with the fn key.

Beats Audio is an enhanced audio feature

that provides a deep, controlled bass while

maintaining a clear sound. Beats Audio is

enabled by default.

You can also view and control the bass

settings through the Windows operating

system. To view and control the bass

properties, open the Beats Audio Control

Panel.

To open Beats Audio Control Panel, from

the Start screen on the keyboard dock, type

c, select Control Panel, select Hardware

and Sound, and then select Beats Audio

Control Panel.

Multimedia features 27

Component Description

(9) Audio-out (headphone) jack/Audio-in

(microphone) jack

Connects optional powered stereo

speakers, headphones, earbuds, a headset,

or a television audio cable. Also connects an

optional headset microphone.

WARNING! To reduce the risk of personal

injury, adjust the volume before using

headphones, earbuds, or a headset. For

additional safety information, see the

Regulatory, Safety and Environmental

Notices.

NOTE: When a device is connected to the

jack, the computer speakers are disabled.

NOTE: Be sure that the device cable has a

4-conductor connector that supports both

audio-out (headphone) and audio-in

(microphone).

NOTE: Stand-alone microphones and

headphones with separate microphone

jacks are not supported.

(10) USB 2.0 port Connects an optional USB device.

Using the webcam

The computer has an integrated webcam that records video and captures photographs. Some models

may allow you to video conference and chat online using streaming video.

To start the webcam:

Mode Steps

1. Swipe from the right edge of the TouchPad or touch screen to display the charms, tap

Search, and then tap the search box.

2. Type c, and then tap CyberLink YouCam from the list of applications.

From the Start screen, type c, and then select CyberLink YouCam from the list of applications.

For details about using the webcam, go to Help and Support. From the Start screen, type h, and then

select Help and Support.

Using audio

On your computer, you can play music CDs, download and listen to music, stream audio content from

the web (including radio), record audio, or mix audio and video to create multimedia. To enhance your

listening enjoyment, attach external audio devices such as speakers or headphones.

28 Chapter 4 Enjoying entertainment features

Connecting speakers

You can attach wired speakers to your computer by connecting them to a USB port (or to the audio-

out jack) on your computer or on a docking station.

To connect wireless speakers to your computer, follow the device manufacturer's instructions. To

connect high-definition speakers to the computer, see Configuring HDMI audio settings on page 32.

Before connecting speakers, lower the volume setting.

Using Beats Audio

Beats Audio is an enhanced audio feature that provides a deep, controlled bass while maintaining a

clear sound. You can experience Beats Audio through the computer's internal speakers, through

external speakers connected to a USB port, or through Beats Audio headphones connected to the

headphone jack.

Accessing Beats Audio Control Panel

Use Beats Audio Control Panel to view and manually control audio and bass settings.

To open Beats Audio Control Panel:

Mode Steps

1. Swipe from the right edge of the TouchPad or touch screen to display the charms, tap Search,

and then tap the search box.

2. Type c, tap Control Panel, tap Hardware and Sound, and then tap Beats Audio Control

Panel.

From the Start screen, type c, select Control Panel, select Hardware and Sound, and then select

Beats Audio Control Panel.

Enabling and disabling Beats Audio

To enable or disable Beats Audio:

Mode Steps

1. Swipe from the right edge of the TouchPad or touch screen to display the charms, tap Search,

and then tap the search box.

2. Type c, tap Control Panel, tap Hardware and Sound, and then tap Beats Audio Control

Panel.

3. Follow the on-screen instructions

1. From the Start screen, type c, select Control Panel, select Hardware and Sound, and then

select Beats Audio Control Panel.

2. Follow the on-screen instructions.

Connecting speakers 29

Checking the sound

To check the audio functions on your computer, follow these steps:

Mode Steps

1. Swipe from the right edge of the TouchPad or touch screen to display the charms, tap

Search, and then tap the search box.

2. Type c, tap Control Panel, tap Hardware and Sound, and then tap Sound.

3. When the Sound window opens, tap the Sounds tab. Under Program Events, tap any sound

event, such as a beep or alarm, and then tap Test.

1. On the Start screen, type c, and then select Control Panel from the list of applications.

2. Select Hardware and Sound, and then select Sound.

3. When the Sound window opens, select the Sounds tab. Under Program Events, select any

sound event, such as a beep or alarm, and then click Test.

You should hear sound through the speakers or through connected headphones.

To check the recording functions on your computer, follow these steps:

Mode Steps

1. Swipe from the right edge of the TouchPad or touch screen to display the charms, tap

Search, and then tap the search box.

2. Type s, and then tap Sound Recorder.

3. Tap Start Recording and speak into the microphone. Save the file to your desktop.

4. Open a multimedia program and play the recording.

1. From the Start screen, type s, and then select Sound Recorder.

2. Click Start Recording and speak into the microphone. Save the file to your desktop.

3. Open a multimedia program and play the recording.

To confirm or change the audio settings on your computer:

Mode Steps

1. Swipe from the right edge of the TouchPad or touch screen to display the charms, tap

Search, and then tap the search box.

2. Type c, and then tap Control Panel from the list of applications.

3. Tap Hardware and Sound, and then tap Sound.

1. From the Start screen, type c, and then select Control Panel from the list of applications.

2. Select Hardware and Sound, and then select Sound.

30 Chapter 4 Enjoying entertainment features

Using video

Your HP computer is a powerful video device that enables you to watch streaming video from your

favorite websites and download video and movies to watch on your computer without needing to

connect to a network.

To enhance your viewing enjoyment, use one of the video ports on the keyboard dock to connect an

external monitor, projector, or television. Your computer has a high-definition multimedia interface

(HDMI) port, which allows you to connect a high-definition monitor or television.

IMPORTANT: Be sure that the external device is connected to the correct port on the computer,

using the correct cable. Check the device manufacturer's instructions if you have questions.

Connecting an HDMI device

NOTE: To connect an HDMI device to your keyboard dock, you need an HDMI cable, sold

separately.

To see the computer screen image on a high-definition television or monitor, connect the high-

definition device according to the following instructions.

1. Connect one end of the HDMI cable to the HDMI port on the computer.

2. Connect the other end of the cable to the high-definition television or monitor.

3. Press f4 on the computer to alternate the computer screen image between 4 display states:

●PC screen only: View the screen image on the computer only.

●Duplicate: View the screen image simultaneously on both the computer and external

device.

●Extend: View the screen image extended across both the computer and external device.

●Second screen only: View the screen image on the external device only.

Each time you press f4 on the computer, the display state changes.

NOTE: Adjust the screen resolution of the external device, especially if you choose the

“Extend” option. From the Start screen on the keyboard dock, type c, and then select Control

Panel from the list of applications. Select Appearance and Personalization. Under Display,

select Adjust screen resolution for best results.

Using video 31

Configuring HDMI audio settings

HDMI is the only video interface that supports high-definition video and audio. After you connect an

HDMI television to the computer, you can then turn on HDMI audio by following these steps:

1. From the Windows desktop, right-click the Speakers icon in the notification area, at the far right

of the taskbar, and then select Playback devices.

2. On the Playback tab, select the name of the digital output device.

3. Click Set Default, and then click OK.

To return the audio stream to the computer speakers:

1. From the Windows desktop, right-click the Speakers icon in the notification area, at the far right

of the taskbar, and then click Playback devices.

2. On the Playback tab, click Speakers and Headphones.

3. Click Set Default, and then click OK.

Camera

Your tablet includes an integrated webcam which is an input device that allows you to record video

and take photos.

32 Chapter 4 Enjoying entertainment features

5 Navigating using the keyboard, touch

gestures and pointing devices

Your computer allows navigation using touch gestures in addition to the keyboard and mouse. Touch

gestures can be used on your computer's TouchPad or on a touch screen.

NOTE: An external USB mouse (purchased separately) can be connected to one of the USB ports

on the keyboard dock.

Review the Windows 8 Basics guide included with your computer. The guide provides information on

common tasks using the TouchPad, touch screen, or the keyboard.

Action keys do not display or function on the on-screen keyboard of the tablet. Tablet models have

special hot key functions on the keyboard to perform routine tasks.

Using the TouchPad

The TouchPad allows you to navigate the computer screen by using simple finger movements.

You can customize the touch gestures by changing settings, button configurations, click speed, and

pointer options. From the Start screen, type c, select Control Panel, and then select Hardware and

Sound. Under Devices and Printers, select Mouse.

Using TouchPad gestures

NOTE: TouchPad gestures are not supported in all apps.

Using the TouchPad 33

Tapping

To make an on-screen selection, use the Tap function on the TouchPad.

●Point to an item on the screen, and then tap one finger on the TouchPad zone to make a

selection. Double-tap an item to open it.

NOTE: Press and hold on the TouchPad to open a help screen that provides information about the

selected item.

Scrolling

Scrolling is useful for moving up, down, or sideways on a page or image.

●Place two fingers slightly apart on the TouchPad zone and then drag them up, down, left, or

right.

34 Chapter 5 Navigating using the keyboard, touch gestures and pointing devices

Pinching/zooming

Pinching and zooming allow you to zoom out or in on images or text.

●Zoom in by placing two fingers together on the TouchPad zone and then moving your fingers

apart.

●Zoom out by placing two fingers apart on the TouchPad zone and then moving your fingers

together.

Rotating (select models only)

Rotating allows you to turn items such as photos.

●Point to an object, then anchor the forefinger of your left hand in the TouchPad zone. Using your

right hand, slide your forefinger in a sweeping motion from 12 o’clock to 3 o’clock. To reverse the

rotation, move your forefinger from 3 o’clock to 12 o’clock.

NOTE: Rotate is intended for specific apps where you can manipulate an object or image. It may

not be functional for all apps.

Using TouchPad gestures 35

Flicking (select models only)

Flicking allows you to navigate through screens or quickly scroll through documents.

●Place three fingers on the TouchPad zone and flick your fingers in a light, quick motion up,

down, left or right.

Edge swipes

Edge swipes allow you to access toolbars on your computer for tasks such as changing settings and

finding or using apps.

36 Chapter 5 Navigating using the keyboard, touch gestures and pointing devices

Right-edge swipe

The right-edge swipe accesses the charms, which let you search, share, start apps, access devices,

or change settings.

●Swipe your finger gently from the right edge to display the charms.

Top-edge swipe

The top-edge swipe allows you to open apps available on the Start screen.

IMPORTANT: When an app is active, the top-edge gesture varies depending on the app.

●Swipe your finger gently from the top edge to display available apps.

Using TouchPad gestures 37

Left-edge swipe

The left-edge swipe accesses your recently opened apps so that you can switch between them

quickly.

●Swipe your finger gently from the left edge of the TouchPad to switch between recently opened

apps.

Using the keyboard and mouse

The keyboard and mouse allow you to type, select items, scroll and perform the same functions as

using touch gestures. The keyboard dock allows you to use special action keys and hot keys to

perform specific functions.

NOTE: Action keys do not display or function on the on-screen keyboard of the tablet.

TIP: The Windows key on the keyboard allows you to quickly return to the Start screen from

an open app or the Windows desktop. Pressing the Windows key again returns you to the previous

screen.

NOTE: Depending on the country or region, your keyboard may have different keys and keyboard

functions than those discussed in this section.

Using the keys

Your computer has different ways to quickly access information or perform functions with certain key

combinations.

Using the action keys

NOTE: Action keys do not display or function on the on-screen keyboard of the tablet.

An action key on the keyboard dock performs an assigned function. The icon on each of the f1

through f4 and f6 through f12 keys illustrates the assigned function for that key.

38 Chapter 5 Navigating using the keyboard, touch gestures and pointing devices

To use an action key function, press and hold the key.

The keyboard dock action key feature is enabled at the factory. You can disable this feature in Setup

Utility (BIOS). See Using Setup Utility (BIOS) and System Diagnostics on page 58 for instructions

on opening Setup Utility (BIOS), and then follow the instructions at the bottom of the screen.

To activate the assigned function after disabling the action key feature on the keyboard dock, you

must press the fn key in combination with the appropriate action key.

CAUTION: Use extreme care when making changes in Setup Utility. Errors can prevent the

computer from operating properly.

Icon Key Description

f1 Opens Help and Support, which provides tutorials, information about the Windows

operating system and your computer, answers to questions, and updates to your

computer.

Help and Support also provides automated troubleshooting tools and access to

support.

f2 Decreases the screen brightness incrementally as long as you hold down the key.

f3 Increases the screen brightness incrementally as long as you hold down the key.

f4 Switches the screen image between display devices connected to the system. For

example, if a monitor is connected to the computer, pressing this key alternates the

screen image from the computer display to the monitor display to a simultaneous

display on both the computer and the monitor.

This action key can also alternate images among other devices that are receiving

video information from the computer.

f6 Mutes or restores speaker sound.

f7 Decreases speaker volume incrementally as long as you hold down the key.

f8 Increases speaker volume incrementally as long as you hold down the key.

f9 Plays the previous track of an audio CD or the previous section of a DVD or a BD.

f10 Begins, pauses, or resumes playback of an audio CD, a DVD, or a BD.

f11 Plays the next track of an audio CD or the next section of a DVD or a BD.

f12 Turns the wireless feature on or off.

NOTE: A wireless network must be set up before a wireless connection is possible.

Using the keyboard and mouse 39

Using Microsoft Windows 8 shortcut keys

Microsoft Windows 8 provides shortcuts to perform actions quickly. Press the Windows key in

combination with the key to perform the action.

NOTE: Action keys do not display or function from the on-screen keyboard of the tablet.

For additional information on Windows 8 shortcut keys go to HP Support Assistant. To access HP

Support Assistant, on the Start screen, select the HP Support Assistant app.

Shortcut

key

Key Description

Opens the Start screen.

+cOpens the charms.

+dOpens the Windows desktop.

+qOpens the All Apps screen.

+tab Switches between open apps.

NOTE: Continue to press this key combination until the app you

want opens.

alt +f4 Closes an active app.

NOTE: Action keys do not display or function on the on-screen

keyboard of the tablet.

40 Chapter 5 Navigating using the keyboard, touch gestures and pointing devices

Using the hot keys

A hot key is a combination of the fn key and either the esc key or the b key.

To use a hot key:

▲Briefly press the fn key, and then briefly press the second key of the combination.

Function Hot key Description

Display system information. fn+esc Displays information about system hardware components and the

system BIOS version number.

Control the bass settings. fn+bEnables or disables the Beats Audio bass settings.

Beats Audio is an enhanced audio feature that provides a deep,

controlled bass while maintaining a clear sound. Beats Audio is

enabled by default.

You can also view and control the bass settings through the Windows

operating system. To view and control the bass properties, open the

Beats Audio Control Panel.

To open Beats Audio Control Panel, from the Start screen on the

keyboard dock, type c, select Control Panel, select Hardware and

Sound, and then select Beats Audio Control Panel.

Using the keyboard and mouse 41

6 Managing power

Your computer can operate on either battery power or external power. When the computer is only

running on battery power and an AC power source is not available to charge the battery, it is

important to monitor and conserve the battery charge. Your computer supports an optimal power plan

to manage how your computer uses and conserves power so that computer performance can be

balanced with power conservation.

Initiating Sleep and Hibernation

Microsoft Windows has two power-saving states, Sleep and Hibernation.

●Sleep–The Sleep state is automatically initiated after a period of inactivity when running on

battery power or on external power. Your work is saved to memory, allowing you to resume your

work very quickly. You can also initiate Sleep manually. For more information, see Initiating and

exiting Sleep on page 42.

●Hibernation–The Hibernation state is automatically initiated if the battery reaches a critical level.

In the Hibernation state, your work is saved to a hibernation file and the computer powers down.

NOTE: If you want to initiate Hibernation manually, you can enable Hibernation using Power

Options. For more information, see Enabling and exiting Hibernation (select models only)

on page 43.

CAUTION: To reduce the risk of possible audio and video degradation, loss of audio or video

playback functionality, or loss of information, do not initiate Sleep while reading from or writing to a

disc or an external media card.

NOTE: You cannot initiate any type of networking connection or perform any computer functions

while the computer is in the Sleep state or in Hibernation.

Initiating and exiting Sleep

With the computer on, you can initiate Sleep in the following ways:

●Briefly press the power button.

●

Swipe from the right edge of the TouchPad or touch screen to display the charms, tap

Settings, tap the Power icon, and then tap Sleep.

– or –

From the Start screen, point to the upper-right or lower-right corner of the screen. When

the charms list opens, select Settings, select the Power icon, and then select Sleep.

To exit Sleep:

●Press the Windows key.

●Briefly press the power button.

●If the display is closed, and the tablet is connected to the keyboard dock, open the display.

42 Chapter 6 Managing power

●Press a key on the keyboard.

●Tap or swipe the TouchPad.

When the computer exits Sleep, the power lights turn on and the computer returns to the screen

where you stopped working.

NOTE: If you have set a password to be required on wakeup, you must enter your Windows

password before the computer will return to the screen.

Enabling and exiting Hibernation (select models only)

You can enable user-initiated Hibernation and change other power settings and timeouts using Power

Options:

1. From the Start screen, type power, select Settings, and then select Power Options from the

list of applications.

2. In the left pane, click Choose what the power button does.

3. Click Change Settings that are currently unavailable.

4. In the When I press the power button area, select Hibernate.

5. Click Save changes.

When the computer exits Hibernation, the power lights turn on and your work returns to the screen.

NOTE: If you have set a password to be required on wakeup, you must enter your Windows

password before your work will return to the screen.

Setting password protection on wakeup

To set the computer to prompt for a password when the computer exits Sleep or Hibernation, follow

these steps:

1. From the Start screen, type power, select Settings, and then select Power Options from the

list of applications.

2. In the left pane, click Require a password on wakeup.

3. Click Change Settings that are currently unavailable.

4. Click Require a password (recommended).

NOTE: If you need to create a user account password or change your current user account

password, click Create or change your user account password, and then follow the on-

screen instructions. If you do not need to create or change a user account password, go to step

5. Click Save changes.

Setting password protection on wakeup 43

Using the power meter and power settings

The power meter is located on the Windows desktop. The power meter allows you to quickly access

power settings and view the remaining battery charge.

●To display the percentage of remaining battery charge and the current power plan, on the

Windows desktop, point over the power meter icon.

●To use Power Options, click the power meter icon and select an item from the list. From the

Start screen, type power, select Settings, and then select Power Options.

Different power meter icons indicate whether the computer is running on battery or external power.

The icon also displays a message if the battery has reached a low or critical battery level.

Running on battery power

When a charged battery is in the tablet and the tablet is not plugged into external power, the tablet

runs on battery power. If the tablet has a charged battery installed and the AC adapter is

disconnected from the tablet, the tablet automatically switches to battery power and the display

brightness decreases to conserve battery life. The battery in the tablet slowly discharges when the

tablet is off and unplugged from external power. When the tablet is attached to the keyboard dock,

the system is powered by the keyboard dock’s battery until the battery reaches a critical level in the

keyboard dock. At that time, the system switches to the tablet’s battery.

Computer battery life varies, depending on power management settings, programs running on the

computer, display brightness, external devices connected to the tablet, and other factors.

NOTE: There is a secondary battery in the keyboard dock. When the tablet is attached to the

keyboard dock, the system is powered by the keyboard dock's battery.

Factory-sealed battery

To monitor the status of your battery, or if the battery is no longer holding a charge, run Battery Check

in HP Support Assistant. To access battery information, from the Start screen, type support, select

the HP Support Assistant app, and then select Battery and performance. If Battery Check

indicates that your battery should be replaced, contact support.

Finding battery information

To monitor the status of your battery, or if the battery is no longer holding a charge, run Battery Check

in HP Support Assistant. To access battery information, from the Start screen, type support, select

the HP Support Assistant app, and then select Battery and performance.

HP Support Assistant provides the following tools and information about the battery:

●Battery test

●Information on battery types, specifications, life cycles, and capacity

44 Chapter 6 Managing power

Conserving battery power

Tips for conserving battery power and maximizing battery life:

●Lower the brightness on the display.

●Select the Power saver setting in Power Options.

●Turn off wireless when you are not using them.

●Disconnect unused external devices that are not plugged into an external power source, such as

an external hard drive connected to a USB port.

●Stop, disable, or remove any external media cards that you are not using.

●Before you leave your work, initiate Sleep or shut down the computer.

Identifying low battery levels

When a battery that is the sole power source for the computer reaches a low or critical battery level,

the following behavior occurs:

●The battery light (select models only) indicates a low or critical battery level.

– or –

●The power meter icon on the Windows desktop shows a low or critical battery notification.

NOTE: For additional information about the power meter, see Using the power meter and

power settings on page 44.

The computer takes the following actions for a critical battery level:

●If Hibernation is disabled and the computer is on or in the Sleep state, the computer remains

briefly in the Sleep state, and then shuts down and loses any unsaved information.

●If Hibernation is enabled and the computer is on or in the Sleep state, the computer initiates

Hibernation.

Resolving a low battery level

Resolving a low battery level when external power is available

●Connect an AC adapter.

●Connect the keyboard dock to the tablet.

●Connect an optional power adapter purchased as an accessory from HP.

Resolving a low battery level when no power source is available

●Initiate Hibernation (see Enabling and exiting Hibernation (select models only) on page 43).

●Save your work and shut down the computer.

Resolving a low battery level when the computer cannot exit Hibernation

When the computer lacks sufficient power to exit Hibernation, follow these steps:

1. Connect the AC adapter to the computer and to external power.

2. Exit Hibernation by pressing the power button.

Running on battery power 45

Running on external AC power

For information on connecting to AC power, refer to the Setup Instructions poster provided in the

computer box.

The computer does not use battery power when the computer is connected to AC external power with

an approved AC adapter or an optional docking/expansion device.

WARNING! To reduce potential safety issues, use only the AC adapter provided with the computer,

a replacement AC adapter provided by HP, or a compatible AC adapter purchased from HP

specifically for this system.

CAUTION: To prevent damage to your system, do not use AC adapters from other tablets or

computers.

Connect the computer to external AC power under any of the following conditions:

WARNING! Do not charge the computer battery while you are onboard aircraft.

●When charging or calibrating a battery

●When installing or modifying system software

●When writing information to a disc (select models only)

●When performing a backup or recovery

When you connect the computer to external AC power:

●The battery begins to charge.

●The display brightness increases.

●The power meter icon on the Windows desktop changes appearance.

When you disconnect external AC power, the following events occur:

●The computer switches to battery power.

●The display brightness automatically decreases to save battery life.

●The power meter icon on the Windows desktop changes appearance.

Shutting down (turning off) the computer

CAUTION: Unsaved information is lost when the computer shuts down. Be sure to save your work

before shutting down the computer.

The Shut down command closes all open programs, including the operating system, and then turns

off the display and computer.

Shut down the computer under any of the following conditions:

●When you are connecting an external hardware device that does not connect to a USB or video

port

●When the computer will be unused and disconnected from external power for an extended

period

To shut down the tablet when it is not connected to the keyboard dock:

▲Press the Windows key and the power button at the same time, and then tap Shut down.

46 Chapter 6 Managing power

Although you can turn off the computer by holding down the power button, the recommended

procedure to shut down computer is to use the Windows Shut down command.

NOTE: If the computer is in the Sleep state or in Hibernation, you must first exit Sleep or

Hibernation before shutdown is possible by briefly pressing the power button.

1. Save your work and close all open programs.

2. Swipe from the right edge of the TouchPad or touch screen to display the charms, tap Settings,

tap the Power icon, and then tap Shut down.

– or –

From the Start screen, point to the upper-right or lower-right corner of the screen.

3. When the charms list opens, click Settings, click the Power icon, and then click Shut down.

If the computer is unresponsive and you are unable to use the preceding shutdown procedures, try

the following emergency procedures in the sequence provided:

To shut down the unresponsive tablet:

▲Press both the Windows key and the power button at the same time.

To shut down the unresponsive tablet when it is connected to the keyboard dock:

●Press ctrl+alt+delete, click the Power icon, and then select Shut down.

●Press and hold the power button for at least 5 seconds.

●Disconnect the computer from external power.

Shutting down (turning off) the computer 47

7 Managing and sharing information

Drives are digital storage devices that help you store, manage, share, and access information. Your

computer has a solid state drive that stores your computer's software, operating system, and also

provides storage for all of your personal files.

For added capacity or functionality, connect an external drive (purchased separately), such as an

optical drive or hard drive, or insert a memory card directly from your phone or camera. A USB flash

drive, connected to the Universal Serial Bus (USB) port on your computer, also allows quick data

transfer. Some devices use the computer's power to run; others have their own power source. Some

devices come with software that must be installed.

NOTE: For information about connecting external wireless devices, see Connecting to a network

on page 21.

NOTE: For more information about required software and drivers, or to learn which computer port to

use, see the manufacturer's instructions.

Using a USB device

Most computers have more than one USB port, because this versatile interface allows you to connect

numerous kinds of external devices—such as a USB keyboard, mouse, external drive, printer,

scanner, or USB hub—to your computer.

NOTE: Some USB devices may not be supported when the computer is running on AC or battery

power if they do not have their own AC adapters. More than one USB device may not be supported

simultaneously when the computer is running on AC or battery power.

Type Description

USB 2.0 Transfers data at 60 MB/s.

USB 3.0 Transfers data at 640 MB/s. USB 3.0 ports, also known as

SuperSpeed ports, are also compatible with USB 1.0 and 2.0

devices.

Connecting a USB device

CAUTION: To reduce the risk of damage to a USB connector, use minimal force to connect the

device.

48 Chapter 7 Managing and sharing information

▲Connect the USB cable for the device to the USB port.

NOTE: The USB port on your computer may look slightly different from the illustration in this

section.

A sound indicates that the device has been detected.

NOTE: The first time you connect a USB device, a message displays on the Windows desktop and

an icon appears in the notification area, letting you know that the device is recognized by the

computer.

Removing a USB device

CAUTION: To reduce the risk of damage to a USB connector, do not pull on the cable to remove

the USB device.

CAUTION: To reduce the risk of loss of information or an unresponsive system, use the following

procedure to safely remove the USB device.

1. Save your information and close all programs associated with the device.

2. From the Windows desktop, tap or click the hardware icon in the notification area, at the far right of

the taskbar. A message, Safely remove hardware and eject media is revealed. Follow the on-

screen instructions.

Connecting a powered USB device

CAUTION: To reduce the risk of damage to the equipment when connecting a powered device, be

sure that the device is turned off and its AC power cord is unplugged.

1. Connect the device to the computer.

2. Plug the device power cord into a grounded AC outlet.

3. Turn on the device.

To disconnect an unpowered external device, stop the device, and then disconnect it from the

computer. To disconnect a powered external device, turn off the device, disconnect it from the

computer, and then unplug the AC power cord.

Using a USB device 49

Inserting and removing a memory card

To insert a memory card:

CAUTION: To reduce the risk of damage to the memory card connectors, use minimal force to

insert a memory card.

1. Hold the card label-side up, with the connectors facing the computer.

2. Insert the card into the memory card reader, and then press in on the card until it is firmly

seated.

A sound indicates that the device has been detected.

To remove a memory card:

CAUTION: To reduce the risk of loss of data or an unresponsive system, use the following

procedure to safely remove the memory card.

1. Save your information and close all programs associated with the memory card.

2. From the Windows desktop, tap or click the remove hardware icon in the notification area, at the

far right of the taskbar. Then, follow the on-screen instructions.

3. Press in on the card (1), and then remove it from the slot (2).

NOTE: If the card is not ejected, pull the card out of the slot.

50 Chapter 7 Managing and sharing information

8 Maintaining your computer

It is important to perform regular maintenance to keep your computer in optimal condition. This

chapter provides information about improving the performance of your computer by running tools

such as Disk Defragmenter and Disk Cleanup. It also provides information about updating your

programs and drivers, instructions for cleaning your computer, and tips for traveling with your

computer.

Improving performance

Everyone wants a fast computer and by performing regular maintenance tasks, using tools such as

Disk Defragmenter and Disk Cleanup, you can drastically improve the performance of your computer.

Also, as your computer gets older, you might consider installing larger drives and adding more

memory.

Using Disk Cleanup

Disk Cleanup searches the hard drive for unnecessary files that you can safely delete to free up disk

space and help the computer run more efficiently.

To run Disk Cleanup:

1. From the Start screen, type disk, select Settings, and then select Free up disk space by

deleting unnecessary files.

2. Follow the on-screen instructions.

Updating programs and drivers

HP recommends that you update your programs and drivers on a regular basis to the latest versions.

Updates can resolve issues and bring new features and options to your computer. Technology is

always changing, and updating programs and drivers allows your computer to run the latest

technology available. For example, older graphics components might not work well with the most

recent gaming software. Without the latest driver, you would not be getting the most out of your

equipment.

Cleaning your computer

Cleaning products

Use the following products to safely clean your computer:

●Dimethyl benzyl ammonium chloride 0.3 percent maximum concentration (For example:

disposable wipes. These wipes come in a variety of brand names.)

●Alcohol-free glass cleaning fluid

●Water with mild soap solution

●Dry microfiber cleaning cloth or a chamois (static-free cloth without oil)

●Static-free cloth wipes

Improving performance 51

CAUTION: Avoid strong cleaning solvents that can permanently damage your computer. If you are

not sure that a cleaning product is safe for your computer, check the product contents to make sure

that ingredients such as alcohol, acetone, ammonium chloride, methylene chloride, and hydrocarbons

are not included in the product.

Fibrous materials, such as paper towels, which can scratch the computer. Over time, dirt particles

and cleaning agents can get trapped in the scratches.

Cleaning procedures

Follow the procedures in this section to safely clean your computer.

WARNING! To prevent electric shock or damage to components, do not attempt to clean your

computer while it is turned on:

Turn off the computer.

Disconnect external power.

Disconnect all powered external devices.

CAUTION: To prevent damage to internal components, do not spray cleaning agents or liquids

directly on any computer surface. Liquids dripped on the surface can permanently damage internal

components.

Cleaning the display

Gently wipe the display using a soft, lint-free cloth moistened with an alcohol-free glass cleaner. Be

sure that the display is dry before closing the display.

Cleaning the sides and cover

To clean the sides and cover, use a soft microfiber cloth or chamois moistened with one of the

cleaning solutions listed previously or use an acceptable disposable wipe.

NOTE: When cleaning the cover of the computer, use a circular motion to aid in removing dirt and

debris.

Cleaning the TouchPad, keyboard, or mouse

WARNING! To reduce the risk of electric shock or damage to internal components, do not use a

vacuum cleaner attachment to clean the keyboard. A vacuum cleaner can deposit household debris

on the keyboard surface.

CAUTION: To prevent damage to internal components, do not allow liquids to drip between the

keys.

●To clean the TouchPad, keyboard. or mouse, use a soft microfiber cloth or chamois moistened

with one of the cleaning solutions listed previously or use an acceptable disposable wipe.

●To prevent keys from sticking and to remove dust, lint, and particles from the keyboard, use a

can of compressed air with a straw extension.

52 Chapter 8 Maintaining your computer

Traveling with or shipping your computer

If you have to travel with or ship your computer, here are some tips to keep in mind to keep your

equipment safe.

●Prepare the computer for traveling or shipping:

◦Attach the tablet to the keyboard dock to protect the tablet screen.

◦Back up your information to an external drive.

◦Remove all discs and all external media cards, such as memory cards, from the computer.

◦Turn off, and then disconnect all external devices.

◦Shut down the computer.

●Take along a backup of your information. Keep the backup separate from the computer.

●When traveling by air, carry the computer as hand luggage; do not check it in with the rest of

your luggage.

CAUTION: Avoid exposing a drive to magnetic fields. Security devices with magnetic fields

include airport walk-through devices and security wands. Airport conveyer belts and similar

security devices that check carry-on baggage use X-rays instead of magnetism and do not

damage drives.

●If you plan to use the computer during a flight, listen for the in-flight announcement that tells you

when you are allowed to use your computer. In-flight computer use is at the discretion of the

airline.

●If you are shipping the computer or a drive, use suitable protective packaging and label the

package “FRAGILE.”

●If the computer has a wireless device installed, the use of these devices may be restricted in

some environments. Such restrictions may apply onboard aircraft, in hospitals, near explosives,

and in hazardous locations. If you are uncertain of the policy that applies to the use of a

particular device, ask for authorization to use your computer before you turn it on.

●If you are traveling internationally, follow these suggestions:

◦Check the computer-related customs regulations for each country or region on your

itinerary.

◦Check the power cord and adapter requirements for each location in which you plan to use

the computer. Voltage, frequency, and plug configurations vary.

WARNING! To reduce the risk of electric shock, fire, or damage to the equipment, do not

attempt to power the computer with a voltage converter kit sold for appliances.

Traveling with or shipping your computer 53

9 Securing your computer and

information

Tablet security is essential for protecting the confidentiality, integrity, and availability of your

information. Standard security solutions provided by the Windows operating system, HP applications,

the non-Windows Setup Utility (BIOS), and other third-party software can help protect your computer

from a variety of risks, such as viruses, worms, and other types of malicious code.

IMPORTANT: Some security features listed in this chapter may not be available on your computer.

Tablet risk Security feature

Unauthorized use of the computer Power-on password

Computer viruses Antivirus software

Unauthorized access to data Firewall software

Unauthorized access to Setup Utility (BIOS) settings and

other system identification information

Administrator password

Ongoing or future threats to the computer Software updates

Unauthorized access to a Windows user account User password

Using passwords

A password is a group of characters that you choose to secure your computer information and to

protect online transactions. Several types of passwords can be set. For example, when you set up

your computer for the first time, you were asked to create a user password to secure your computer.

Additional passwords can be set in Windows or in the HP Setup Utility (BIOS) that is preinstalled on

your computer.

You may find it helpful to use the same password for a Setup Utility (BIOS) feature and for a Windows

security feature.

Use the following tips for creating and saving passwords:

●To reduce the risk of being locked out of the computer, record each password and store it in a

secure place away from the computer. Do not store passwords in a file on the computer.

●When creating passwords, follow requirements set by the program.

●Change your passwords at least every three months.

●An ideal password is long and has letters, punctuation, symbols, and numbers.

●Before you send your computer for service, back up your files, delete confidential files, and then

remove all password settings.

For additional information about Windows passwords, such as screen-saver passwords, from the

Start screen, type support, and then select the HP Support Assistant app.

54 Chapter 9 Securing your computer and information

Setting Windows passwords

Password Function

User password Protects access to a Windows user account. You may also

set up your computer to require the user password to exit

Sleep. See Setting password protection on wakeup

on page 43 for more information.

Administrator password Protects administrator-level access to computer contents.

NOTE: This password cannot be used to access Setup

Utility (BIOS) contents.

Setting Setup Utility (BIOS) passwords

Password Function

Administrator password ●Must be entered each time you access Setup Utility

(BIOS).

●If you forget your administrator password, you cannot

access Setup Utility (BIOS).

NOTE: The administrator password can be used in place of

the power-on password.

NOTE: Your administrator password is not interchangeable

with an administrator password set in Windows, nor is it

displayed as it is set, entered, changed, or deleted.

NOTE: If you enter the power-on password at the first

password check before the “Press the ESC key for Startup

Menu” message is displayed, you must enter the

administrator password to access Setup Utility (BIOS).

Power-on password ●Must be entered each time you turn on or restart the

computer.

●If you forget your power-on password, you cannot turn

on or restart the computer.

NOTE: The administrator password can be used in place of

the power-on password.

NOTE: A power-on password is not displayed as it is set,

entered, changed, or deleted.

To set, change, or delete an administrator or power-on password in Setup Utility (BIOS):

1. To start Setup Utility (BIOS), turn on or restart the computer, quickly press esc, and then press

f10.

2. Use the arrow keys to select Security, and then follow the on-screen instructions.

Your changes take effect when the computer restarts.

Using Internet security software

When you use your computer to access email, a network, or the Internet, you potentially expose your

computer to computer viruses, spyware, and other online threats. An antivirus program may be

Using Internet security software 55

preinstalled on your computer. It is strongly recommended that you use an antivirus program of your

choice in order to fully protect your computer.

Using antivirus software

Computer viruses can disable programs, utilities, or the operating system, or cause them to function

abnormally. Antivirus software can detect most viruses, destroy them, and in most cases, repair any

damage they have caused.

To provide ongoing protection against newly discovered viruses, antivirus software must be kept up to

date.

An antivirus program may be preinstalled on your computer. It is strongly recommended that you use

the antivirus program of your choice in order to fully protect your computer.

For more information about computer viruses, from the Start screen, type support, and then select

the HP Support Assistant app.

Using firewall software

Firewalls are designed to prevent unauthorized access to a system or network. A firewall can be

software you install on your computer and/or network, or it can be a combination of both hardware

and software.

There are two types of firewalls to consider:

●Host-based firewalls—Software that protects only the computer it is installed on.

●Network-based firewalls—Installed between your DSL or cable modem and your home network

to protect all the computers on the network.

When a firewall is installed on a system, all data sent to and from the system is monitored and

compared with a set of user-defined security criteria. Any data that does not meet those criteria is

blocked.

Installing software updates

HP, Microsoft Windows, and third-party software installed on your computer should be regularly

updated to correct security problems and improve software performance. For more information, see

Updating programs and drivers on page 51.

Installing Windows updates

Updates to the operating system and other software may have become available after the computer

left the factory. Microsoft sends out alerts regarding critical updates. To protect the computer from

security breaches and viruses, install all critical updates from Microsoft as soon as you receive an

alert.

To be sure that all available updates are installed on the computer, observe these guidelines:

●Run Windows Update as soon as possible after you set up your computer. From the Start

screen, type w, select Settings, and then select Windows Update.

●Run Windows Update monthly thereafter.

●Obtain updates to Windows and other Microsoft programs, as they are released, from the

Microsoft website and through the updates link in Help and Support.

56 Chapter 9 Securing your computer and information

Installing HP and third-party software updates

HP recommends that you regularly update the software and drivers that were originally installed on

your computer. To download the latest versions, go to http://www.hp.com/support. At this location,

you can also register to receive automatic update notifications when they become available.

If you have installed third-party software after you purchased your computer, regularly update the

software. Software companies provide software updates to their products to correct security problems

and improve functionality of the software.

Securing your wireless network

When you set up your wireless network, always enable security features. For more information, see

Protecting your WLAN on page 23.

Backing up your software applications and information

Regularly back up your software applications and information to protect them from being permanently

lost or damaged through a virus attack or a software or hardware failure. For more information, see

Backing up, restoring, and recovering on page 61.

Securing your wireless network 57

10 Using Setup Utility (BIOS) and System

Diagnostics

Setup Utility, or Basic Input/Output System (BIOS), controls communication between all the input and

output devices on the system (such as disk drives, display, keyboard, mouse, and printer). Setup

Utility (BIOS) includes settings for the types of devices installed, the startup sequence of the

computer, and the amount of system and extended memory.

Starting Setup Utility (BIOS)

To start Setup Utility (BIOS), turn on or restart the computer, quickly press esc, and then press f10.

Information about how to navigate in Setup Utility (BIOS) is located at the bottom of the screen.

NOTE: Use extreme care when making changes in Setup Utility (BIOS). Errors can prevent the

computer from operating properly.

Updating the BIOS

Updated versions of the BIOS may be available on the HP website.

Most BIOS updates on the HP website are packaged in compressed files called SoftPaqs.

Some download packages contain a file named Readme.txt, which contains information regarding

installing and troubleshooting the file.

Determining the BIOS version

To determine whether available BIOS updates contain later BIOS versions than those currently

installed on the computer, you need to know the version of the system BIOS currently installed.

BIOS version information (also known as ROM date and System BIOS) can be displayed by pressing

fn+esc (if you are already in Windows) or by using Setup Utility (BIOS).

1. Start Setup Utility (BIOS) see Starting Setup Utility (BIOS) on page 58.

2. Use the arrow keys to select Main.

3. To exit Setup Utility (BIOS) without saving your changes, use the arrow keys to select Exit,

select Exit Discarding Changes, and then press enter.

4. Click Yes.

58 Chapter 10 Using Setup Utility (BIOS) and System Diagnostics

Downloading a BIOS update

CAUTION: To reduce the risk of damage to the computer or an unsuccessful installation, download

and install a BIOS update only when the computer is connected to reliable external power using the

AC adapter. Do not download or install a BIOS update while the computer is running on battery power

or connected to an optional power source. During the download and installation, follow these

instructions:

Do not disconnect power from the computer by unplugging the power cord from the AC outlet.

Do not shut down the computer or initiate Sleep.

Do not insert, remove, connect, or disconnect any device, cable, or cord.

1. From the Start screen, type support, and then select the HP Support Assistant app.

2. Click Updates and tune-ups, and then click Check for HP updates now.

3. Follow the on-screen instructions.

4. At the download area, follow these steps:

a. Identify the most recent BIOS update and compare it to the BIOS version currently installed

on your computer. If the update is more recent than your BIOS, make a note of the date,

name, or other identifier. You may need this information to locate the update later, after it

has been downloaded to your hard drive.

b. Follow the on-screen instructions to download your selection to the hard drive.

If the update is more recent than your BIOS, make a note of the path to the location on your

hard drive where the BIOS update is downloaded. You will need to access this path when

you are ready to install the update.

NOTE: If you connect your computer to a network, consult the network administrator before

installing any software updates, especially system BIOS updates.

BIOS installation procedures vary. Follow any instructions that are displayed on the screen after the

download is complete. If no instructions are displayed, follow these steps:

1. From the Start screen, type e, and then select File Explorer.

2. Click your hard drive designation. The hard drive designation is typically Local Disk (C:).

3. Using the hard drive path you recorded earlier, open the folder on your hard drive that contains

the update.

4. Double-click the file that has an .exe extension (for example, filename.exe).

The BIOS installation begins.

5. Complete the installation by following the on-screen instructions.

NOTE: After a message on the screen reports a successful installation, you can delete the

downloaded file from your hard drive.

Using HP PC Hardware Diagnostics (UEFI)

HP PC Hardware Diagnostics is a Unified Extensible Firmware Interface (UEFI) that allows you to run

diagnostic tests to determine whether the computer hardware is functioning properly. The tool runs

outside the operating system so that it can isolate hardware failures from issues that are caused by

the operating system or other software components.

Using HP PC Hardware Diagnostics (UEFI) 59

To start HP PC Hardware Diagnostics UEFI:

1. Turn on or restart the computer, quickly press esc, and then press f2.

The BIOS searches three places for the HP PC Hardware Diagnostics (UEFI) tools in the

following order:

a. Connected USB drive

NOTE: To download the HP PC Hardware Diagnostics (UEFI) tool to a USB drive, see

Downloading HP PC Hardware Diagnostics (UEFI) to a USB device on page 60.

b. Hard drive

c. BIOS

2. Click the type of diagnostic test you want to run, and then follow the on-screen instructions.

NOTE: If you need to stop a diagnostic test, press esc.

Downloading HP PC Hardware Diagnostics (UEFI) to a USB device

NOTE: The HP PC Hardware Diagnostics (UEFI) download instructions are provided in English

only.

1. Go to http://www.hp.com.

2. Click Support & Drivers, and then click the Drivers & Software tab.

3. Enter the product name in the text box, and then click Search.

4. Select your computer model, and then select your operating system.

5. In the Diagnostic section, click HP UEFI Support Environment.

– or –

Click Download, and then select Run.

60 Chapter 10 Using Setup Utility (BIOS) and System Diagnostics

11 Backing up, restoring, and recovering

Your computer includes tools provided by HP and Windows to help you safeguard your information

and retrieve it if you ever need to. These tools will help you return your computer to a proper working

state or even back to the original factory state, all with simple steps.

This chapter provides information about the following processes:

●Creating recovery media and backups

●Restoring and recovering your system

NOTE: This guide describes an overview of backing up, restoring and recovering options. For more

details about the tools provided, see Help and Support. From the Start screen, type h, and then select

Help and Support.

Creating recovery media and backups

Recovery after a system failure is only as good as your most recent backup.

1. After you successfully set up the computer, create HP Recovery media. This step creates a

backup of the HP Recovery partition on the computer. The backup can be used to reinstall the

original operating system in cases where the hard drive is corrupted or has been replaced.

HP Recovery media you create will provide the following recovery options:

●System Recovery—Reinstalls the original operating system and the programs that were

installed at the factory.

●Minimized Image Recovery—Reinstalls the operating system and all hardware-related

drivers and software, but not other software applications.

●Factory Reset—Restores the computer to its original factory state by deleting all

information from the hard drive and re-creating the partitions. Then it reinstalls the

operating system and the software that was installed at the factory.

See Creating HP Recovery media on page 62.

2. As you add hardware and software programs, create system restore points. A system restore

point is a snapshot of certain hard drive contents saved by Windows System Restore at a

specific time. A system restore point contains information that Windows uses, such as registry

settings. Windows creates a system restore point for you automatically during a Windows update

and during other system maintenance (such as a software update, security scanning, or system

diagnostics). You can also manually create a system restore point at any time. For more

information and steps for creating specific system restore points, see Help and Support. From

the Start screen, type h, and then select Help and Support.

3. As you add photos, video, music, and other personal files, create a backup of your personal

information. Windows File History can be set to regularly and automatically back up files from

libraries, desktop, contacts, and favorites. If files are accidentally deleted from the hard drive and

they can no longer be restored from the Recycle Bin, or if files become corrupted, you can

restore the files that you backed up using File History. Restoring files is also useful if you ever

Creating recovery media and backups 61

choose to reset the computer by reinstalling Windows or choose to recover using HP Recovery

Manager.

NOTE: File History is not enabled by default, so you must turn it on.

For more information and steps for enabling Windows File History, see Help and Support. From

the Start screen, type h, and then select Help and Support.

Creating HP Recovery media

HP Recovery Manager is a software program that offers a way to create recovery media after you

successfully set up the computer. HP Recovery media can be used to perform system recovery if the

hard drive becomes corrupted. System recovery reinstalls the original operating system and the

software programs installed at the factory, and then configures the settings for the programs. HP

Recovery media can also be used to customize the system or restore the factory image if you replace

a hard drive.

●Only one set of HP Recovery media can be created. Handle these recovery tools carefully, and

keep them in a safe place.

●HP Recovery Manager examines the computer and determines the required storage capacity for

the blank USB flash drive or the number of blank DVD discs that will be required.

●To create recovery discs, your computer must have an optical drive with DVD writer capability,

and you must use only high-quality blank DVD-R, DVD+R, DVD-R DL, or DVD+R DL discs. Do

not use rewritable discs such as CD±RW, DVD±RW, double-layer DVD±RW, or BD-RE

(rewritable Blu-ray) discs; they are not compatible with HP Recovery Manager software. Or

instead you can use a high-quality blank USB flash drive.

●If your computer does not include an integrated optical drive with DVD writer capability, but you

would like to create DVD recovery media, you can use an external optical drive (purchased

separately) to create recovery discs, or you can obtain recovery discs for your computer from the

HP website. For U.S. support, go to http://www.hp.com/go/contactHP. For worldwide support, go

to http://welcome.hp.com/country/us/en/wwcontact_us.html. If you use an external optical drive,

it must be connected directly to a USB port on the computer; the drive cannot be connected to a

USB port on an external device, such as a USB hub.

●Be sure that the computer is connected to AC power before you begin creating the recovery

media.

●The creation process can take up to an hour or more. Do not interrupt the creation process.

●If necessary, you can exit the program before you have finished creating all of the recovery

DVDs. HP Recovery Manager will finish burning the current DVD. The next time you start HP

Recovery Manager, you will be prompted to continue, and the remaining discs will be burned.

To create HP Recovery media:

1. Connect the tablet to the keyboard dock.

2. From the Start screen, type recovery, and then select HP Recovery Manager.

3. Select Recovery Media Creation, and then follow the on-screen instructions.

If you ever need to recover the system, see Recovering using HP Recovery Manager on page 65.

62 Chapter 11 Backing up, restoring, and recovering

Restore and recovery

There are several options for recovering your system. Choose the method that best matches your

situation and level of expertise:

●If you need to restore your personal files and data, you can use Windows File History to restore

your information from the backups you created. For more information and steps for using File

History, see Help and Support. From the Start screen, type h, and then select Help and

Support.

●If you need to correct a problem with a preinstalled application or driver, use the Drivers and

Applications Reinstall option of HP Recovery Manager to reinstall the individual application or

driver.

From the Start screen, type recovery, select HP Recovery Manager, select Drivers and

Applications Reinstall, and then follow the on-screen instructions.

●If you want to restore the system to a previous state without losing any personal information,

Windows System Restore is an option. System Restore allows you to restore without the

requirements of Windows Refresh or a reinstallation. Windows creates system restore points

automatically during a Windows update and other system maintenance events. Even if you did

not manually create a restore point, you can choose to restore to an automatically created

restore point. For more information and steps for using Windows System Restore, see Help and

Support. From the Start screen, type h, and then select Help and Support.

●If you want a quick and easy way to recover the system without losing your personal information,

settings, or apps that came preinstalled on your computer or were purchased from the Windows

Store, consider using Windows Refresh. This option does not require backing up data to another

drive. See Using Windows Refresh for quick and easy recovery on page 63.

●If you want to reset your computer to its original state, Windows provides an easy way to remove

all personal data, apps, and settings, and reinstall Windows.

For more information, see Remove everything and reinstall Windows on page 64.

●If you want to reset your computer using a minimized image, you can choose the HP Minimized

Image Recovery option from the HP Recovery partition (select models only) or HP Recovery

media. Minimized Image Recovery installs only drivers and hardware-enabling applications.

Other applications included in the image continue to be available for installation through the

Drivers and Applications Reinstall option in HP Recovery Manager.

For more information, see Recovering using HP Recovery Manager on page 65.

●If you want to recover the computer's original factory partitioning and content, you can choose

the System Recovery option from the HP Recovery partition or the HP Recovery media that you

have created. For more information, see Recovering using HP Recovery Manager on page 65.

●If you have replaced the hard drive, you can use the Factory Reset option of HP Recovery

media to restore the factory image to the replacement drive. For more information, see

Recovering using HP Recovery Manager on page 65.

●If you wish to remove the recovery partition to reclaim hard drive space, HP Recovery Manager

offers the Remove Recovery Partition option.

For more information, see Removing the HP Recovery partition on page 67.

Using Windows Refresh for quick and easy recovery

When your computer is not working properly and you need to regain system stability, the Windows

Refresh option allows you to start fresh and keep what is important to you.

Restore and recovery 63

IMPORTANT: Refresh removes any traditional applications that were not originally installed on the

system at the factory. Any Windows 8 apps that came preinstalled on your computer or were

purchased from the Windows Store will be saved.

NOTE: During Refresh, a list of removed traditional applications will be saved so that you have a

quick way to see what you might need to reinstall. See Help and Support for instructions on

reinstalling traditional applications. From the Start screen, type h, and then select Help and Support.

NOTE: You may be prompted for your permission or password when using Refresh. See Help and

Support for more information. From the Start screen, type h, and then select Help and Support.

To start Refresh:

1. Connect the tablet to the keyboard dock.

2. From the Start screen, point to the upper-right or lower-right corner of the screen to reveal the

charms.

3. Click Settings.

4. Click Change PC settings in the bottom-right corner of the screen, and then select General

from the PC settings screen.

5. Scroll the right-side choices down to display Refresh your PC without affecting your files.

6. Under Refresh your PC without affecting your files, select Get started, and then follow the

on-screen instructions.

Remove everything and reinstall Windows

Sometimes you want to perform detailed reformatting of your computer, or you want to remove

personal information before you give away or recycle your computer. The process described in this

section provides a speedy, simple way to return the computer to its original state. This option

removes all personal data, apps, and settings from your computer, and reinstalls Windows.

IMPORTANT: This option does not provide backups of your information. Before using this option,

back up any personal information you wish to retain.

You can initiate this option by using the f11 key or from the Start screen.

To use the f11 key:

1. Connect the tablet to the keyboard dock.

2. Press f11 while the computer boots.

– or –

Press and hold f11 as you press the power button.

3. Select Troubleshoot from the boot options menu.

4. Select Reset your PC, and then follow the on-screen instructions.

To use the Start screen:

1. Connect the tablet to the keyboard dock.

2. From the Start screen, point to the upper-right or lower-right corner of the screen to reveal the

charms.

3. Click Settings.

64 Chapter 11 Backing up, restoring, and recovering

4. Click Change PC settings in the bottom-right corner of the screen, and then select General

from the PC settings screen.

5. Scroll the right-side choices down to display Remove everything and reinstall Windows.

6. Under Remove everything and reinstall Windows, select Get started, and follow the on-

screen instructions.

Recovering using HP Recovery Manager

HP Recovery Manager software allows you to recover the computer to its original factory state by

using the HP Recovery media you created or by using the HP Recovery partition. You can choose

from one of the following recovery options:

●System Recovery—Reinstalls the original operating system, and then configures the settings for

the programs that were installed at the factory.

●Minimized Image Recovery—Reinstalls the operating system and all hardware-related drivers

and software, but not other software applications.

●Factory Reset—Restores the computer to its original factory state by deleting all information

from the hard drive and re-creating the partitions. Then it reinstalls the operating system and the

software that was installed at the factory.

The HP Recovery partition allows Minimized Image Recovery and System Recovery.

What you need to know

●HP Recovery Manager recovers only software that was installed at the factory. For software not

provided with this computer, you must either download the software from the manufacturer's

website or reinstall the software from the media provided by the manufacturer.

●Recovery through HP Recovery Manager should be used as a final attempt to correct computer

issues.

●HP Recovery media must be used if the computer hard drive fails. If you have not already

created recovery media, see Creating HP Recovery media on page 62.

●To use the Factory Reset option, you must use HP Recovery media. If you have not already

created recovery media, see Creating HP Recovery media on page 62.

●If the HP Recovery media do not work, you can obtain recovery media for your system from the

HP website. For U.S. support, go to http://www.hp.com/go/contactHP. For worldwide support, go

to http://welcome.hp.com/country/us/en/wwcontact_us.html.

IMPORTANT: HP Recovery Manager does not automatically provide backups of your personal

data. Before beginning recovery, back up any personal data you wish to retain.

Using the HP Recovery partition

The HP Recovery partition (select models only) allows you to perform a minimized image recovery

without the need for recovery discs or a recovery USB flash drive. This type of recovery can only be

used if the hard drive is still working.

Restore and recovery 65

To start HP Recovery Manager from the HP Recovery partition:

1. Connect the tablet to the keyboard dock.

2. Press f11 while the computer boots.

– or –

Press and hold f11 as you press the power button.

3. Select Troubleshoot from the boot options menu.

4. Select HP Recovery Manager, and follow the on-screen instructions.

Using HP Recovery media to recover

You can use HP Recovery media to recover the original system. This method can be used if your

system does not have an HP Recovery partition or if the hard drive is not working properly.

1. If possible, back up all personal files.

2. Insert the first HP Recovery disc you created into the optical drive on your computer or into an

optional external optical drive, and then restart the computer.

– or –

Insert the HP Recovery USB flash drive you created into a USB port on your computer, and then

restart the computer.

NOTE: If the computer does not automatically restart in HP Recovery Manager, change the

computer boot order. See Changing the computer boot order on page 66.

3. Follow the on-screen instructions.

Changing the computer boot order

If computer does not restart in HP Recovery Manager, you can change the computer boot order,

which is the order of devices listed in BIOS where the computer looks for startup information. You can

change the selection for an optical drive or a USB flash drive.

To change the boot order:

1. Insert the HP Recovery media you created.

2. Restart the computer.

3. Press and hold esc while the computer is restarting, and then press f9 for boot options.

4. Select the optical drive or USB flash drive you want to boot from.

5. Follow the on-screen instructions.

66 Chapter 11 Backing up, restoring, and recovering

Removing the HP Recovery partition

HP Recovery Manager software allows you to remove the HP Recovery partition to free up hard drive

space.

IMPORTANT: After you remove the HP Recovery partition, you can no longer use the Windows

Refresh option, the Windows option to remove everything and reinstall Windows, or the HP Recovery

Manager option. So before you remove the Recovery partition, create HP Recovery media; see

Creating HP Recovery media on page 62.

Follow these steps to remove the HP Recovery partition:

1. From the Start screen, type recovery, and then select HP Recovery Manager.

2. Select Remove Recovery Partition, and then follow the on-screen instructions.

Restore and recovery 67

12 Specifications

Input power

The power information in this section may be helpful if you plan to travel internationally with the

computer.

The computer operates on DC power, which can be supplied by an AC or a DC power source. The

AC power source must be rated at 100–240 V, 50–60 Hz. Although the computer can be powered

from a standalone DC power source, it should be powered only with an AC adapter or a DC power

source supplied and approved by HP for use with this computer.

The computer can operate on DC power within the following specifications. Operating voltage and

current varies by platform.

Input power Rating

Operating voltage and current 19.5 V dc @ 2.31 A - 45 W

19.5 V dc @ 3.33 A - 65 W

DC plug of external HP power supply

NOTE: This product is designed for IT power systems in Norway with phase-to-phase voltage not

exceeding 240 V rms.

NOTE: The computer operating voltage and current can be found on the system regulatory label.

Operating environment

Factor Metric U.S.

Temperature

Operating 5°C to 35°C 41°F to 95°F

Nonoperating -20°C to 60°C -4°F to 140°F

Relative humidity (noncondensing)

Operating 10% to 90% 10% to 90%

Nonoperating 5% to 95% 5% to 95%

Maximum altitude (unpressurized)

Operating -15 m to 3,048 m -50 ft to 10,000 ft

Nonoperating -15 m to 12,192 m -50 ft to 40,000 ft

68 Chapter 12 Specifications

13 Electrostatic Discharge

Electrostatic discharge is the release of static electricity when two objects come into contact—for

example, the shock you receive when you walk across the carpet and touch a metal door knob.

A discharge of static electricity from fingers or other electrostatic conductors may damage electronic

components. To prevent damage to the computer, damage to a drive, or loss of information, observe

these precautions:

●If removal or installation instructions direct you to unplug the computer, first make sure that it is

properly grounded, and then remove the cover.

●Keep components in their electrostatic-safe containers until you are ready to install them.

●Avoid touching pins, leads, and circuitry. Handle electronic components as little as possible.

●Use nonmagnetic tools.

●Before handling components, discharge static electricity by touching an unpainted metal surface

of the component.

●If you remove a component, place it in an electrostatic-safe container.

If you need more information about static electricity or assistance with component removal or

installation, contact support.

Index

AC adapter light 4, 11

action keys

decrease screen brightness

Help and Support 39

identifying 10

increase screen brightness 39

next track or section 39

play, pause, resume 39

previous track or section 39

switch screen image 39

volume down 39

volume mute 39

volume up 39

alignment post connectors,

identifying 4

alignment posts, identifying 7

ambient light sensor, identifying

6, 27

antivirus software, using 56

audio functions, checking 30

audio-out (headphone) jacks 5,

12, 26, 28

autorotate lock

adjusting 14

backing up

personal files 62

backing up software and

information 57

backups 61

bass settings hot key 41

battery

discharging 45

low battery levels 45

battery information, finding 44

battery light 4, 11

battery power 44

Beats Audio

Control Panel 27, 29

enabling and disabling 29

hot key 10, 27, 41

using 29

best practices 1

BIOS

determining version 58

downloading an update 59

updating 58

Bluetooth device 21, 24

boot order

changing HP Recovery

Manager 66

bottom-edge swipe

Touch screen 19

brightness

adjusting 14

buttons

left TouchPad 8

power 4

right TouchPad 8

volume 5, 26

Windows 6

cables

USB 49

caps lock light, identifying 9

caring for your computer 51

checking audio functions 30

cleaning your computer 51

components

display 6

left-side 12

right-side 11

top 7

computer reset 64

configuring audio for HDMI 32

connecting to a WLAN 24

connector

alignment post 4

power 4, 11

corporate WLAN connection 24

critical battery level 45

deleted files, restoring 63

Disk Cleanup software 51

docking connector, identifying 7

docking port, identifying 4

edge swipe gestures 18

bottom-edge swipe 19

left-edge swipe 19, 38

right-edge swipe 18, 37

top-edge swipe 19, 37

electrostatic discharge 69

esc key, identifying 10

external AC power, using 46

external devices 49

firewall software 56

flicking TouchPad gesture 36

fn key, identifying 10, 41

fun things to do 1

HDMI

configuring audio 32

HDMI port

connecting 31

identifying 11, 27

Hibernation

exiting 43

initiated during critical battery

level 45

initiating 43

high-definition devices,

connecting 31

hot keys

bass settings 41

Beats Audio 10

description 41

display system information 41

using 41

HP and third-party software

updates, installing 57

HP PC Hardware Diagnostics

(UEFI)

using 59

HP Quick Start 1

70 Index

HP Recovery Manager 65

correcting boot problems 66

starting 66

HP Recovery media

creating 62

recovery 66

HP Recovery partition 66

recovery 65

removing 67

hubs 48

input power 68

installing

critical updates 56

internal microphones, identifying

6, 27

Internet connection setup 23

Internet security software, using

jacks

audio-out (headphone) 5, 12,

26, 28

keyboard dock

identifying 7

releasing the tablet 13

keyboard hot keys, identifying 41

keys

action 10

esc 10

fn 10

Windows 10

labels

serial number 13

left-edge swipe

Touch screen 19

TouchPad 38

lights

AC adapter 4, 11

battery 4, 11

caps lock 9

mute 9

wireless 9

low battery level 45

maintenance

Disk Cleanup 51

memory card

inserting 50

memory card reader, identifying

micro SD memory card reader,

identifying 5

minimized image

creating 65

recovery 65

mouse, external

setting preferences 33

mute light, identifying 9

operating environment 68

optional external devices, using

original system recovery 65

passwords

Setup Utility (BIOS) 55

Windows 55

pinching

Touch screen 17

TouchPad 35

ports

HDMI 11, 27, 31

USB 11, 12, 27, 28

power

battery 44

power button, identifying 4

power connector, identifying 4,

product name and number,

computer 13

public WLAN connection 24

recovery 63

discs 62, 66

HP Recovery Manager 65

media 66

starting 66

supported discs 62

system 65

USB flash drive 66

using HP Recovery media 62

recovery media

creating 62

creating using HP Recovery

Manager 62

recovery partition 65

removing 67

recycle

computer 63, 64

refresh 63

computer 63

regulatory information 13

release latch, identifying 7

remove everything and reinstall

Windows 64

reset

computer 63, 64

steps 64

restore, Windows File History 63

right-edge swipe

Touch screen 18

TouchPad 37

rotating

Touch screen 18

TouchPad 35

scrolling

Touch screen 17

TouchPad 34

security, wireless 23

serial number 13

serial number, computer 13

setting password protection on

wakeup 43

settings

autorotate lock 14

brightness 14

changing 14

landscape view 14

portrait view 14

tablet orientation 14

setup of WLAN 23

Setup Utility (BIOS) passwords

shipping the computer 53

shutdown 46

Sleep

exiting 42

initiating 42

Index 71

slots

memory card reader 12

software

Disk Cleanup 51

software updates, installing 56

speakers

connecting 29

identifying 6, 27

stretching

Touch screen 17

supported discs, recovery 62

system information

hot key 41

locating 13

system recovery 65

system restore point

creating 61

restoring 63

tapping

Touch screen 16

TouchPad 34

top-edge swipe

Touch screen 19

TouchPad 37

Touch screen gestures 18

edge swipe gestures 18, 19

one-finger slide 15

pinching 17

rotating 18

scrolling 17

stretching 17

tapping 16

using 15

TouchPad

buttons 8

identifying 8

TouchPad gestures

edge swipe gestures 36, 37,

flicking 36

pinching 35

rotating 35

scrolling 34

tapping 34

using 33

zooming 35

TouchPad zone, identifying 8

traveling with the computer 53

turning off the computer 46

unresponsive system 46

USB cable, connecting 49

USB devices

connecting 48

description 48

removing 49

USB hubs 48

USB ports, identifying 11, 12, 27,

using external AC power 46

using passwords 54

vent, identifying 5

video 31

volume button, identifying 5, 26

warranty period 13

webcam

identifying 6, 27

using 28

webcam light, identifying 6, 27

Windows

backup 62

File History 62, 63

Refresh 63

reinstall 63, 64

remove everything and reinstall

option 64

reset 64

restoring files 63

system restore point 61, 63

Windows button, identifying 6

Windows key, identifying 10

Windows passwords 55

Windows updates, installing 56

wireless certification information

wireless controls

operating system 21

wireless light 9

wireless network (WLAN)

connecting 24

corporate WLAN connection

equipment needed 23

functional range 24

public WLAN connection 24

securing 57

security 23

using 22

WLAN antennas, identifying 6

WLAN device 22

zooming

TouchPad 35

72 Index

Intel 7260H HP TPN-Q133 User Manual 2

Intel Mobile Communications HP TPN-Q133 2

Contents

User Manual 2

Navigation menu

Namespaces

Views

Navigation