Intel SKL21SDS SKL21-SDS User Manual
Intel Corporation SKL21-SDS IMPORTANT SAFETY INFORMATION
a href="https://usermanual.wiki/Intel" itemprop="url">
Intel >
user manual
| Download: | |
| Mirror Download [FCC.gov] | |
| Document ID | 2730780 |
| Application ID | jbPtVYM2fwQACHQpT9YMpQ== |
| Document Description | user manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 8.83kB (110360 bits) |
| Date Submitted | 2015-08-28 00:00:00 |
| Date Available | 2015-08-28 00:00:00 |
| Creation Date | 2015-08-28 11:13:10 |
| Producing Software | Adobe PDF Library 10.0 |
| Document Lastmod | 2015-08-28 11:13:13 |
| Document Title | IMPORTANT SAFETY INFORMATION |
| Document Creator | Acrobat PDFMaker 10.1 for Word |
| Document Author: | Intel Corporation |
![Intel® 2 in 1 System – Model SKL21-SDS PVT2 Intel, and the Intel logo are trademarks of Intel Corporation in the U.S. and/or other countries. Copyright © 2015, Intel Corporation. All rights reserved. IPN: H82194-001 IMPORTANT SAFETY & REGULATORY INFORMATION DO NOT DISCARD This information should be kept with the device for future reference. ENGINEERING SAMPLE/DEVELOPMENT DEVICE NOT FOR SALE OR LEASE This device is provided for test, evaluation, and demonstration purposes only as permitted in your region. This device is designed to meet or exceed international Safety, EMC, RF and Environmental standards. Changes or modifications not expressly approved by Intel Corporation could void regulatory certifications as well as the developer's authority to operate the equipment. SAFETY WARNINGS and CAUTIONS 1. Use only the power adapter provided with the device. Other power adapters may overheat or damage the device. 2. The battery pack is not user-serviceable; the battery[ies] in this device cannot be easily replaced by users themselves’. Do not attempt to remove the battery pack as damage to the device or battery pack may occur. 3. If the device is damaged crushed or severely dropped, to ensure safe and proper operation, return it to Intel for servicing. 4. If the device is exposed to excessive temperatures the battery may fail. Do not expose the device to environments over 100 degrees C. 5. Do NOT drop the device in water, as the device is not waterproof. Operation and device failure may occur. 6. Caution should be exercised during long exposure to excessive sound levels from earphones and headphones as this can cause hearing loss. 7. This device may contain an Intel® RealSense™ 3D Camera module that contains an integrated laser projector. The camera complies with International Standard EN/IEC 60825-1:2007 edition 2 for a Class 1 laser product. The camera also complies with US FDA performance standards for laser products except for deviations pursuant to Laser notice No. 50, dated June 24, 2007." Do not modify, attempt to open or service the camera module within this device in any way. Modification or service of the camera module might cause the emissions to exceed the Class 1 level. Do not activate this device if the camera is damaged in any manner. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Federal Communications Commission Regulatory Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: To assure continued FCC compliance, operation is subject to the following two conditions:](https://usermanual.wiki/Intel/SKL21SDS.user-manual/User-Guide-2730780-Page-1.png)