Intermec Technologies BTM311 BTM311 User Manual

Intermec Technologies Corporation BTM311 1

a href="https://usermanual.wiki/Intermec-Technologies" itemprop="url"> Intermec Technologies >

Compliance Insert

Document Number:   632194  Rev:  A   Page 1 of 4 CV30 Compliance Insert Graphics List:  1016 – UL Listed; 1013 – UL GS; 1014 – NOM; 2001 – C-tick; 2002 – CE; 2006 – FCC Logo; 4001 - WEEE  For Users in the United States and Canada For Users Outside of the United States or Canada (Translate the above line to the languages listed in section 5.5 of the Spec for SAC Driven User Documentation)   Caution: This marking indicates that the user should read all included documentation before use.  This product conforms to the following approvals. The users of this product are cautioned to use accessories and peripherals approved by Intermec Technologies Corporation. The use of accessories other than those recommended, or changes to this product that are not approved by Intermec Technologies Corporation, may void the compliance of this product and may result in the loss of the user’s authority to operate the equipment. Class B Compliant Products FCC Digital Emissions Compliance   This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.  This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.  If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  •  Reorient or relocate the radio or television receiving antenna. •  Increase the separation between the computer equipment and receiver. •  Connect the equipment into an outlet on a circuit different from that to which the radio or television receiver is connected. •  Consult the dealer or an experienced radio television technician for help. Canadian Digital Apparatus Compliance
Document Number:   632194  Rev:  A   Page 2 of 4 This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.    Caution: The battery pack used in this device may ignite, create a chemical burn hazard, explode, or release toxic materials if mistreated. Do not incinerate, disassemble, or heat above 100°C (212°F). Do not short circuit; may cause burns. Keep away from children. Use of incorrect battery pack may present a risk of fire or explosion.  Promptly dispose of used battery pack according to the instructions. Battery Recycling Information  This product contains or uses a lithium ion (Li-ion) main battery. When the battery reaches the end of its useful life, the spent battery should be disposed of by a qualified recycler or hazardous materials handler. Do not mix this battery with the solid waste stream. Contact your Intermec Technologies Service Center for recycling or disposal information. Note: In the U.S.A., the EPA does not consider spent Li-ion batteries as hazardous waste.  Caution: For Power Supply use Intermec Model 073573 part number 851-082-003. No user-serviceable parts.  This product has been tested and meets the FCC RF exposure guidelines when used with the Intermec accessories supplied or designated for this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. Important Radio Information For Users in the United States and Canada Place this supplement in your manual. This device complies with Part 15 of the FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that can cause undesired operation.   Caution: Changes or modifications not expressly approved by Intermec could void the user’s authority to operate this equipment   For Users Outside the United States and Canada
Download:
Mirror Download [FCC.gov]
Document ID707672
Application ID2az2nR+i1I5rG26b/6NpKw==
Document DescriptionCompliance Insert
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize3.3kB (41196 bits)
Date Submitted2006-09-21 00:00:00
Date Available2006-09-21 00:00:00
Creation Date2006-09-20 09:07:49
Producing SoftwareAcrobat Distiller 7.0.5 (Windows)
Document Lastmod2006-09-20 09:07:49
Document TitleMicrosoft Word - CV30 Compliance Insert Draft.doc
Document CreatorPScript5.dll Version 5.2.2
Document Author: chwhite
FCC ID Filing: HN2-BTM311

Navigation menu