Intermec Technologies CK30MIG2 802MIG2 User Manual

Intermec Technologies Corporation 802MIG2 CK30 QSG 2 P65

a href="https://usermanual.wiki/Intermec-Technologies" itemprop="url"> Intermec Technologies >

User Manual 2

CK30 Handheld Computer Operator’s GuideIntermec ConfigurationIntermec Configuration8:29 PM8:29 PM1 Communications2 Scanners, Symbologies3 SNMP4 CK30 Settings5 TE 2000Esc-Exit   Enter-SelectIntermec ConfigurationIntermec Configuration8:29 PM8:29 PM1 Communications2 Scanners, Symbologies3 SNMP4 CK30 Settings5 TE 2000Esc-Exit   Enter-SelectIntermec ConfigurationIntermec Configuration8:29 PM8:29 PM1 Communications2 Scanners, Symbologies3 SNMP4 CK30 Settings5 TE 2000Esc-Exit   Enter-SelectI/OI/OIntermec ConfigurationIntermec Configuration8:29 PM8:29 PM1 Communications2 Scanners, Symbologies3 SNMP4 CK30 Settings5 TE 2000Esc-Exit   Enter-SelectIntermec ConfigurationIntermec Configuration8:29 PM8:29 PM1 Communications2 Scanners, Symbologies3 SNMP4 CK30 Settings5 TE 2000Esc-Exit   Enter-SelectScan button*INTERMEC*Intermec ConfigurationIntermec Configuration8:29 PM8:29 PM1 Communications2 Scanners, Symbologies3 SNMP4 CK30 Settings5 TE 2000Esc-Exit   Enter-SelectIntermec ConfigurationIntermec Configuration8:29 PM8:29 PM1 Communications2 Scanners, Symbologies3 SNMP4 CK30 Settings5 TE 2000Esc-Exit   Enter-SelectBatterylatchFull EmptyIntermec ConfigurationIntermec Configuration8:29 PM8:29 PM1 Communications2 Scanners, Symbologies3 SNMP4 CK30 Settings5 TE 2000Esc-Exit   Enter-SelectPress I/O to turn on the CK30.When you turn on the CK30, the screen turns on. If the screen does not turn on, install a charged battery. Check the battery level.Press       to turn on the backlight.Change the contrast.Change the beep volume.Press and release the Orange keyand then press and releaseto change the contrast. Scan a bar code.Point the CK30 at the bar code.Press the Scan button or pull the trigger. A red aiming beam appears near the bar code.Move the CK30 so the aiming beam lies across the bar code. When the CK30 beeps, the bar code has been scanned.123Press down on the latch and lift the battery out of the CK30.Insert the tabs on the new battery into the bottom of the opening.Press the battery in place to snap the latch.Press and release the Green key and then press and release          to change the beep volume. 123If the battery is empty, change it.The backlight makes the screen easier to see in dark areas.Depending on the kind of scanner your CK30 has, you may need to move the CK30 closer to or farther from the bar code.6001 36th Avenue WestEverett, WA  98203U.S.A.www.intermec.com© 2003  Intermec Technologies Corp. All Rights Reserved
Download:
Mirror Download [FCC.gov]
Document ID352874
Application IDtZYe59rM02D/1eHfqeBuEg==
Document DescriptionUser Manual 2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize95.68kB (1196019 bits)
Date Submitted2003-09-03 00:00:00
Date Available2003-09-03 00:00:00
Creation Date2003-08-11 17:34:28
Producing SoftwareAcrobat Distiller 5.0.5 (Windows)
Document Lastmod2003-08-11 10:40:16
Document TitleCK30 OpGuideV03.indd
Document CreatorPScript5.dll Version 5.2
Document Author: MLimtiaco
FCC ID Filing: HN2CK30MIG2

Navigation menu