Itron 100GDLD AMR transceiver device for utility meters User Manual

Itron, Inc. AMR transceiver device for utility meters 100G Datalogging Installation Guide Direct Mount

a href="https://usermanual.wiki/Itron" itemprop="url"> Itron >

Contents

Users Manual Part 2

 100G Datalogging Installation Guide - Direct Mount 21  This chapter provides instructions to install the 100G Datalogging Gas Endpoint on a Sensus/Rockwell Meter. These instructions apply to 11-tooth, 16-tooth, and 18-tooth Sensus 100G Datalogging Gas Endpoints.   Note Sensus meters are also known as Invensys, Equimeter, and Rockwell. For these instructions, all meter types are referred to as Sensus meters.  100G Datalogging Gas Endpoint Sensus 11-tooth   Sensus 16-tooth  Sensus 18-tooth                       CHAPTER  3  Sensus/Rockwell Meter Installation
Chapter 3 Sensus/Rockwell Meter Installation  22 100G Datalogging Installation Guide - Direct Mount  To Remove the Index from the Meter 1. Remove the four index cover screws and the index cover from the Sensus meter. Alternate screw removal following the numbered pattern as shown in the photo.  2. Examine the mounting screws. If they are 5/8" long and not corroded, keep them to attach the 100G Datalogging Gas Endpoint assembly. If the screws are not the correct length or if the screws are corroded, discard.   Note You may use the removed index cover as a temporary storage container for screws. Properly dispose all unused screws, old index covers, gaskets, tamper seals, and other leftover materials. Do not leave materials on customer premises.  3. Unscrew one index mounting screw completely. Hold one hand under the index to catch the screw. While removing the other mounting screw, pull the index away from the meter to keep the index backplate against the back of the screw. Remove the screw completely after the index is free of the meter.   Set the index aside where it will not be damaged or fill with dirt, rain or snow. The index will be mounted in the endpoint later in this procedure. Verify the index mounting screws are 5/8" long and not corroded. If the screws are the correct length and not corroded, retain for later use. If the original screws are discarded, use the correct replacement screws (see Installation Prerequisites on page 8.)
Download:
Mirror Download [FCC.gov]
Document ID1114241
Application IDianYcNaC0f+qVFkooGlSaw==
Document DescriptionUsers Manual Part 2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize111.7kB (1396278 bits)
Date Submitted2009-05-21 00:00:00
Date Available2009-05-27 00:00:00
Creation Date2009-04-22 09:18:41
Producing SoftwareAdobe PDF Library 9.0
Document Lastmod2009-04-22 09:18:55
Document Title100G Datalogging Installation Guide - Direct Mount
Document CreatorAcrobat PDFMaker 9.1 for Word
Document Author: Itron
FCC ID Filing: EO9100GDLD

Navigation menu