Itron BCR900 AMR transceiver device for endpoint installation User Manual

Itron, Inc. AMR transceiver device for endpoint installation User s Guide

a href="https://usermanual.wiki/Itron" itemprop="url"> Itron >

Contents

BCR900 - Users Manual

900 MHz Belt-Clip Radio User’s Guide 900 MHz Belt-Clip Radio
Identification 900MHz Belt Clip Radio User’s Guide 12/16/2009 TDC-0889-000 Copyright © 2009 Itron, Inc. All rights reserved. Confidentiality Notice The information contained herein is proprietary and confidential and is being provided subject to the condition that (i) it be held in confidence except to the extent required otherwise by law and (ii) it will be used only for the purposes described herein. Any third party that is given access to this information shall be similarly bound in writing. Trademark Notice Itron is a registered trademark of Itron, Inc. All other product names and logos in this documentation are used for identification purposes only and may be trademarks or registered trademarks of their respective companies. Suggestions If you have comments or suggestions on how we may improve this documentation, send them to TechnicalCommunicationsManager@itron.com If you have questions or comments about the software or hardware product, contact Itron Technical Support: Contact • Internet: www.itron.com • E-mail: support@itron.com • Phone: 1 800 635 8725 Patent Notice US and foreign patents pending Manufacturer: Itron, Inc. Trade name: 900MHz Belt Clip Radio Model number: 900 BCR Radio Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cuse undesired operation. Class B Part 15 Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio or TV technician for help. Industry Canada This equipment complies with policies RSS-210 and RSS-GEN of the Industry Canada rules. Operation is subject to the following two conditions: • This device may not cause interference, and • This device must accept any interference, including interference that may cause undesired operation of the device. Note Modifications to the device or its antenna not expressly approved by the party responsible for compliance could void the user’s authority to operate the device. Transportation Classification The Federal Aviation Administration prohibits operating transmitters and receivers on all commercial aircraft. When powered, 900MHz Belt Clip Radios are considered operating transmitters and receivers and cannot be shipped by air. All product returns must be shipped by ground transportation.
Download:
Mirror Download [FCC.gov]
Document ID1227616
Application ID7UJevdgyYwwH/c5uayaYLw==
Document DescriptionBCR900 - Users Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize58.26kB (728199 bits)
Date Submitted2010-01-14 00:00:00
Date Available2010-01-15 00:00:00
Creation Date2009-12-16 12:38:20
Producing SoftwareAdobe PDF Library 9.0
Document Lastmod2009-12-17 07:29:45
Document TitleUser’s Guide
Document CreatorAcrobat PDFMaker 9.0 for Word
Document Author: 900 MHz Belt-Clip Radio
FCC ID Filing: EO9BCR900

Navigation menu