Itron IM711-200 DirectLink WiFi Module User Manual

Comverge Inc DirectLink WiFi Module 13 0413 Exhibit Cover

a href="https://usermanual.wiki/Itron" itemprop="url"> Itron >

Manual

5015 B.U. Bowman Drive Buford, GA 30518 USA Voice: 770-831-8048 Fax: 770-831-8598Certification ExhibitFCC ID: RAB-IM711-200FCC Rule Part: 15.247ACS Project Number: 13-0413Manufacturer: Comverge Inc.Model: DirectLink WiFiManual
IntelliMODULE Wi-Fi User GuideNOTE:  Before you can install and configure your IntelliMODULE Wi-Fi module, follow the thermostatinstallation guide to complete the wiring and installation of your thermostat. Once you have finished thethermostat installation you are then ready to configure your IntelliMODULE Wi-Fi as described in thefollowing instructions.If installed in a host device such that the FCC ID of the module is not visible or end users do not havestraightforward commonly used methods for access to remove the module so that the FCC ID of themodule is visible, the host device must be labeled as follows: Contains FCC ID: RAB-IM711-200.STEP 1: INSTALL IntelliMODULEThe IntelliMODULE Wi-Fi is a pluggable radio module that can beeasily plugged into and removed from a compatible device.  In thisexample, the IntelliMODULE is being plugged into a compatiblethermostat chassis.Before plugging the IntlliMODULE into a compatible device, ensurethat power is turned OFF to the device.  Once power is OFF to thedevice, slide the IntelliMODULE into the corresponding module sloton the device.  The IntelliMODULE is designed with two “wings” onplastic case that should align with slots in the accepting device.Ensure the wings are lined up with the slots as you start to install themodule.  In this example, the wings on the module (shown in orange)would line up with the green slots at the top of the module slot of thedevice.  Gently insert the module into the slot until it is firmly seated inthe module slot.WARNING: DO NOT PUSH WITH EXCESSIVE PRESSURE IF THE MODULEDOES NOT SEAT CORRECTLY AS DAMAGE COULD OCCUR TO BOTH DEVICES.Once the module is seated in the module slot, the power can be turned ON for the device.STEP 2: ADHOC CONNECTIONWhen the IntelliMODULE first powers up and is notalready configured to connect to a network, it willtemporary create its own network.  Setting up yourIntelliMODULE WiFi connection first requires you toconnect to the module with another WiFi device – such  asa laptop, Smart phone, tablet, etc – to configure the WiFisettings to connect to your WiFi router. To do this, enter
Download:
Mirror Download [FCC.gov]
Document ID2386197
Application IDZoL/81p0F4vZDGYRTckSHw==
Document DescriptionManual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize13.06kB (163250 bits)
Date Submitted2014-09-12 00:00:00
Date Available2014-09-12 00:00:00
Creation Date2014-09-11 11:20:48
Producing SoftwareScanSoft PDF Create! 7
Document Lastmod2014-09-11 11:20:52
Document TitleMicrosoft Word - 13-0413 - Exhibit Cover.doc
Document CreatorMicrosoft Word - 13-0413 - Exhibit Cover.doc
Document Author: courtney.mcgann
FCC ID Filing: RAB-IM711-200

Navigation menu