JTECH Communications PAG-QT TOP MOUNT ALPHA PAGER (PAG-QT) User Manual FCCA10122405 ZT21A
JTECH Communications, Inc. TOP MOUNT ALPHA PAGER (PAG-QT) FCCA10122405 ZT21A
Users Manual
![](/img.php?id=1625619&img=bg1.png)
Operational Description of the equipment
Turn on the pager
Insert one 2.4V charge battery to the standby mode.
Function operation
Time Date And Year setting:
Press 3sec the « Function button » under the standby mode.
Press « Function button» to set hour.
Press 3sec the « Function button » under the hour mode.
Press « Function button» to set minute.
Press 3sec the « Function button » under the minute mode.
Press « Function button» to set month.
![](/img.php?id=1625619&img=bg2.png)
Press 3sec the « Function button » under the month mode.
Press « Function button» to set day.
Press 3sec the « Function button » under the day mode.
Press « Function button» to set year.
Press 3sec the « Function button » to the standby mode.
Light setting:
Press « Function button» to the light mode.
Press « Function button » to the standby mode.
GENERAL FUNCTIONS
Message Receiving
If a message is received, the pager will alert by user.
Type of Battery
Use only 2.4V charge battery.
Light mode
Provide light at night.
![](/img.php?id=1625619&img=bg3.png)
FCC Compliance and Advisory
Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions:(1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device,
according to Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try correct the interference by one or more
of the following measures:
1.Reorient the receiving antenna.
2.Increase the separation between the equipment and receiver.
3.Connect the equipment into and outlet on a circuit different from that to which the receiver is
connected.
4.Consult the dealer or an experienced radio/TV technician for help.
Any special accessories needed for compliance must be specified in the instruction manual.
Warning: A shielded-type power cord is required in order to meet FCC emission limits and
also to prevent interference to the nearby radio and television reception. It is essential that
only the supplied power cord be used. Use only shielded cables to connect I/O devices to this
equipment.
CAUSION: Any changes or modifications not expressly approved by the party responsible for
compliance could void your authority to operate the equipment.
IC statementThis Class B digital apparatus complies with Canadian ICES-003.Cet appareil
numérique de la classe B est conforme à la norme NMB-003 du Canada.
FCC ID: HLG-PAG-QT