JTS Professional Co IN-264TB Wireless Body-Pack Transmitter User Manual Appendix 4 Manual

JTS Professional Co Ltd Wireless Body-Pack Transmitter Appendix 4 Manual

User Manual

59508-021-02UHF PLL Dual Channel Diversity Wireless System* The system is of the innovative design to allow changing the transmitter’s frequency by long-distance .* IN264R with band width of 36 MHz.* Preset 6 groups, maximum 23 channels in one group.2IN46REMOSETIN426R SET ▲▲REMOSET SET ▲▲AFRFAFRFMusicLifeINFINITYSET +-IN426TB
Music INFINITYLife012IN461. Important Caution 2. Features 3. Parts Identification3-1 IN264R3-2 IN264TH3-3 IN264TB3-4 Accessories4. Connection4-1 Connect to the subsequent unit4-2 Connect the power supply unit5. Operation5-1 Set up the system5-2 Set up ID code5-3 Synchronize the channel5-4 Check system status5-5 Manual select channel5-6 REMOSET button lock5-7 Adjust the sensitivity of the microphone6. Specification010102020304040505050606060708091011131. Important CautionAlways make all connections before plugging the unit into an AC power outlet. Do not leave the devices in a place with high temperature or high humidity.Do not handle the power cord with wet hands !Keep the devices away from re and heat sources. Pair the ID codes of the transmitter and the receiver to have proper function.2. FeaturesJTS IN264 wireless microphone system is designed with the world rst RF remote setting function (REMOSET). A user can set the receiver with desired frequency and press the “REMOSET” Key; then the transmitter will automatically be set. The operation distance can reach 10 meters. This brings great convenience to sound engineers during live performance. IN264 is of 36MHz bandwidth to render 23 transmitters work simultaneously. It provides great convenience to large venue.A new capsule has been developed for IN264TH . The capsule, SAM-8W, is designed for large venue with hundreds of thousands watt power. The SAM-8W delivers vivid details of vocal and instruments. The IN264 is of stylish industry design. Yet JTS bombproof quality remains as always.
2IN46Music INFINITYLife02 03REMOSETIN426R SET ▲▲REMOSET SET ▲▲AFRFAFRF3. Parts Identification3-1 IN264RFront panelPower SwitchChannel Selector: including “ up”, “ down” and “Set” buttonLCD PanelREMOSET Key: press it to send a desired channel data to a transmitterRear panelBNC antenna connectorPower Supply Jack (12-18V/600mA): for connecting the power supply unitSquelch adjuster: to adjust radio signal level of both channelsMixed AF Output (6.3mm jack, unbalanced): for connection to a balanced input, e.g. of a mixer or amplier Balanced XLR Output: for connection to the balanced input, e.g. of a mixer or an amplierOutput Level Attenuation(-10dB,-20dB): to attenuate the balanced XLR output level by 10dB,20dBLIFT / GND12345676891011abcdefg121314151617AFRFabdceLCD Panel of the ReceiverAF Level: display the strength of audio signalRF Level: display the strength of radio signalAntenna Status: the receiver will automatically select an antenna with stronger signal levelLow battery indicator: display the low battery status of its transmitterGroup & Channel: there are 6 groups, maximum 23 channels in one group.3-2 IN264THLCD DisplayBattery TraySet button: set the conguration of handheld transmitterUp button: select the settings of transmitterDown button: select the settings of transmitterPower and Mute SwitchLCD Panel of the Handheld TransmitterBattery status: display battery statusGroup & Channel: there are 6 groups, maximum 23 channels in one group.1224 4335 56789 1011 1097fg14151612 1713
2IN46Music INFINITYLife04 05hi1819202123222426253-3 IN264TBLCD DisplayBattery TraySet button: set the conguration of bodypack transmitterUp button: select the settings of transmitterDown button: select the settings of transmitter4 Pin mini XLR mic. input Power SwitchGain control: control sensitivity of the transmitterPad: -20dB, -6dB, 0dBLCD Panel of the Body-Pack TransmitterBattery status: display battery statusGroup & Channel: there are 6 groups, maximum 23 channels in one group.273-4 AccessoriesAC/DC adaptorAF output cable (with Φ6.3 plug at both ends) Screwdriver (IN264TB)CM-501 (IN264TB) 2728293027 79104. Connection4-1 Connect to the subsequent unit (e.g. mixer, or amplier) Connect one end of a proper AF cable to the AF Output or Balanced XLR Output socket , then plug another end to the “MIC IN” input socket of a mixer or a amplier (Step 1 of Figure 1)4-2 Connect the power supply unit Plug in one end of AC/DC adaptor cable to Power Supply Jack in the rear panel of receiver, and plug another end into an AC outlet (Step 2 of Figure 1)252628-ih1819232420 21 22-20 -6 02930MIXERAUDIO OUTPUTDC INPUTFigure 121
2IN46Music INFINITYLife06 075. Operation5-1 Set up the system A) Turn on the power of the receiverSwitch the “Power Switch” to “ON”. The “LCD Panel” and “REMOSET” Key will light up.B) Turn on the power of the transmitterPress the “Power Switch” . The “LCD Display” will light up.C) Mute Function ( for IN264TH )After the transmitter's power is on, short pressing the "Power Switch " will mute the microphone. Press the "Power Switch" again will re-activate the microphone.Notice: You have to hold the "Power Switch" for 3 seconds in order to turn o the transmitter. D) Install the antennas in a vertical position5-2 Set up ID codeIn order to match one receiver channel to one transmitter, IN264 is designed with“ ID code”. If and only if both ID codes of a receiver channel and a transmitter match each other, the “REMOSET” function works. When setting the ID code, system will automatically avoid the ID code used by the other channel. There are 100 ID codes available.A) Press "Set" button for 3 seconds, LCD Panel will start ashing.B) Press "Set" to enter "ID Code" setting window. (Figure 2) C) Press " Up" or Down" button to select a distinct ID code from "id 0" to "id 99". D) After setting, press "Set" again to save the setting.25417 24 12 181 6317ReceiverHandheld and BodyPack transmitterID code ON/OFF settingA) Press "Set" button for 3 seconds, LCD Panel will start ashing.B) Press "Set" a couple of times until "ID Code ON/OFF" setting window shows.C) Press " Up" or " Down" button to select between " ID ON " and " ID OFF ". D) After setting, press "Set" again to save the settings.Caution When ID code is o (idOFF), the transmitter will accept any synchronization from any IN264R.ID code selectingA) Press "Set" button for 3 seconds, LCD Panel will start ashing.B) Press "Set" a couple of times until "ID Code" setting window shows.C) Press " Up" or " Down" button to select a distinct ID code from " id 0" to "id 99 ". (Figure 3)D) After setting, press "Set" again to save the setting.Figure 2 SET ▲▲Figure 33”SET +-IN426TB-3”14 2014 20
2IN46Music INFINITYLife08 095-4 Check system statusA) Antenna Status: the receiver will automatically select an antenna with stronger signal reception and highlight that antenna (Figure 6)B) Battery indicator: the receiver’s battery indicator will show the same gauge as the transmitters. If the transmitter is under low battery status, the receiver LCD backlight will be on amber.Figure 6AFRFFigure 7AFRFc5-3 Synchronize the channelA) Press "Set" button on the receiver for 3 Seconds, the group (G) in the "Group & Channel" area will ash. (Figure 4)B) Press " Up" or " Down" button to select a desired groupC) Press "Set" again and the Channel (CH) in the "Group & Channel" area will ash.D) Press " Up" or " Down" button to select a desired channel.E) After setting, press “Set” again to save the settings.F) Press "REMOSET" to synchronize the channel of a transmitter. (Figure 5)G) If the channel of the transmitter fails to change, the "REMOSET" key will keep ashing.Notice 1: The transmitter has to be set to "synchronization on (SYnOn)" in order to allow the receiver to synchronize.(Handheld and body Pack Setting List p.12 )Notice 2 : When setting the channel, system will automatically avoid the channel used by the other channel. 4e5-5 Manual select channel: ReceiverA) Press "Set" button for 3 seconds, the group (G) in the "Group & Channel" area will ash. (Figure 8)B) Press " Up" or " Down" button to select a desired group.C) Press "Set" again and the Channel (CH) in the "Group & Channel" area will ash.D) Press " Up" or " Down" button to select a desired channel.E) After setting, press “Set” again to save the setting. Scan FunctionA) Press "Set" button for 3 seconds, the group (G) will ash. B) Press "Set" to enter “Sn OF” or “Sn On”.C) Press " Up" to select “Sn On” , press " Down" to select “Sc OF” .D) If select “Sc On” , when select channel, the receiver will jump over a channel in use automatically. Handheld and BodyPack transmitterA) Press "Set" button for 3 seconds, the group (G) will ash. (Figure 9)B) Press " Up" or " Down" button to select a desired group.C) Press "Set" again and the Channel (CH) will ash. D) Press " Up" or " Down" button to select a desired channel. E) After setting, press “Set” again to save the setting.Figure 8 SET ▲▲AFRFFigure 4 Figure 5REMOSET SET ▲▲AFRF SET ▲▲AFRFFigure 93”SET +-IN426TB3”
2IN46Music INFINITYLife10 115-6 Lock ON FunctionReceiverA) Press "Set" button for 3 seconds to enter setting windowB) Press "Set" again until the Lock setting window shows. (Figure 10)Notice: Original setting is lock o (Lo OF).C) Press " Up" or " Down" button to select the mode between "Lock On" and "Lock o".D) After setting, press "Set" again to save the setting.To release the “Lock ON”A) Press “Set” for 2 seconds.B) Press “down” to select “Lock OFF”.C) Press “Set” to store. Handheld and BodyPack transmitterA) Press "Set" button for 3 seconds to enter setting window. (Figure 11)B) Press "Set" again until the Lock setting window shows.Notice: Original setting is lock o (Lo OF). C) Press " Up" or " Down" button to select the mode between "Lock On" and "Lock o". D) After setting, press "Set" again to save the setting.To release the “Lock ON”A) Press “Set” for 2 seconds.B) Press “down” to select “Lock OFF”.C) Press “Set” to store. 5-7 Adjust the sensitivity of the microphoneHandheld transmitterA) Press "Set" button for 3 seconds to enter setting window. (Figure 12)B) Short press "Set" until the sensitivity setting window shows.C) Press " Up" or " Down" button to select the sensitivity among 0db, -3db, -6db, -9db, -12db, -15db, -18db and -21db. D) After setting, press "Set" again to save the setting.BodyPack transmitterA) Use the screwdriver included to adjust the sensitivity from gain control . (clockwise is "increase")B) If further adjustment is needed please adjust the pad.5-8 Adjust the transmitting powerHandheld/Body Pack TransmitterA) Push the "Set" button several times until the "rF Lo " or "rF Hi" ashes.B) Then push "Up" to choose "Hi" for high transmitting power and push "Down" to choose "Lo" for low transmitting power.C) Push the "Set" again to save the setting.292526Figure 10 SET ▲▲AFRFFigure 123”Figure 113”SET +-IN426TB3”
2IN46Music INFINITYLife12 13~Handheld and Body Pack Setting ListSensitivitySettingsSynchronizationON/OFF0 dB is the highest sensitivityThere are 100 ID codes.When ID code is OFF (id OFF), the transmitter willaccept any synchronization from any IN264R. “On” means “REMOSET” function always opens;“OFF” means “REMOSET” function is turned oID code ON/OFFID code selectLock ON button unlockbutton lock6. Specification6-1 IN264R6-2 IN264TH6-3 IN264TBFrequency Preparation....Remoset............................Carrier Frequency RangeS/N Ratio............................T.H.D..................................Display...............................Display Contents..............Controls.............................Audio Output Level..........AF Output Impedance......Squelch..............................Operation Voltage.............Output Connector.............Dimension(m/m)...............PLL Synthesized ControlRadio Frequency : 2.4GHzEffective distance: 10m502~960 MHz>105dB<0.6%@1KHzLCDChannel, Antenna A/B, Mute Display, RF/AF Level Meter, Low battery, ID NumberPower On/Off, Frequency Up/Down, Lock-on, ID Pairing, Remoset-12dBȍPilot Tone & Noise Mute12-18 VDC, 600 mA2 XLR Balanced Socket / 1 Ø6.3mm unbalanced phone jack420mm(W) * 44mm(H) * 211mm(D)PLL Synthesized Control502~960 MHz10mW±10KHz±48KHzChannel, Battery Fuel Gauge, ID NumberPower On/Off, AF Level, Frequency Up/Down, Lock-on Mode,ID Pairing<-50 dBC50~16,000 HzUM3, AA 1.5V*2Frequency Preparation.........Carrier Frequency Range.....RF Outputs............................Stability..................................Frequency Deviation.............LCD Display...........................Controls.................................Spurious Emissions.............Audio Frequency ResponseBattery....................................Frequency Preparation........Carrier Frequency Range....RF Outputs............................Stability.................................Frequency Deviation............LCD Display..........................Controls................................Output connector.................Spurious Emissions.............Audio Frequency ResponseBattery...................................PLL Synthesized Control502~960 MHz10mW±10KHz±48KHzChannel, Battery Fuel Gauge, ID NumberPower On/Off, AF Level, Frequency Up/Down, PAD, Gain ControlLock-on Mode, ID Pairing4P mini XLR<-50 dBC40~18,000 HzUM3, AA 1.5V*2

Navigation menu