JVCKENWOOD 378700 UHF Digital Transceiver User Manual

JVC KENWOOD Corporation UHF Digital Transceiver

a href="https://usermanual.wiki/JVCKENWOOD" itemprop="url"> JVCKENWOOD >

Instruction Manual

NX-700-K FCC ID: K44378600 / IC: 282F-378600 NX-800-K FCC ID: K44378700 INSTRUCTION MANUAL THANK YOU We are grateful you chose KENWOOD for your personal mobile applications. We believe this easy-to-use transceiver will provide dependable communications to keep personnel operating at peak efficiency. KENWOOD transceivers incorporate the latest in advanced technology. As a result, we feel strongly that you will be pleased with the quality and features of this product. MODELS COVERED BY THIS MANUAL The models listed below are covered by this manual: •NX- 700: VHF DIGITAL TRANSCEIVER•NX- 800: UHF DIGITAL TRANSCEIVER PRECAUTIONS Observe the following precautions to prevent fire, personal injury, and transceiver damage. • Do not attempt to configure the transceiver while driving; it is too dangerous. • Do not disassemble or modify the transceiver for any reason. • Do not expose the transceiver to long periods of direct sunlight, nor place it near heating appliances. • If an abnormal odor or smoke is detected coming from the transceiver, switch the transceiver power off immediately, and contact your KENWOOD dealer. • Use of the transceiver while you are driving may be against traffic laws. Please check and observe the vehicle regulations in your area. • Do not use options not specified by KENWOOD.NOTICES TO THE USER WARNING:Ƈ GOVERNMENT LAW PROHIBITS THE OPERATION OF UNLICENSED TRANSMITTERS WITHIN THE TERRITORIES UNDER GOVERNMENT CONTROL. ƇILLEGAL OPERATION IS PUNISHABLE BY FINE AND /OR INPRISONMENT. Ƈ REFER SERVICE TO QUALIFIED TECHNICIANS ONLY. SAFETY:It is important that the operator is aware of, and understands, hazards common to the operation of any transceiver. WARNING:ƇEXPLOSIVE ATMOSPHERES (GASES, DUST, FUMES, etc.) Turn OFF your transceiver while taking on fuel or while parked in gasoline service stations. Do not carry spare fuel containers in the trunk of your vehicle if your transceiver is mounted in the trunk area. ƇINJURY FROM RADIO FREQUENCY TRANSMISSIONS Do not operate your transceiver when somebody is either touching the antenna or standing within 2 to 3 feet (60 to 90 cm) of it, to avoid the possibility of radio frequency burns or related physical injury. ƇDYNAMITE BLASTING CAPS Operating the transceiver within 500 feet (150m) of dynamite blasting caps may cause them to explode. Turn OFF your transceiver when in an area where blasting is in progress, or where ‘TURN OFF TWO-WAY RADIO’ sighs have been posted. If you are transporting blasting caps in your vehicle, make sure they are carried in a closed metal box with a padded interior. Do not transmit while the caps are being placed into or removed from the container.
NX-700-K FCC ID: K44378600 / IC: 282F-378600 NX-800-K FCC ID: K44378700 One or more of the following statements may be applicable: FCC WARNING This equipment generates or uses radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.packing instructions are for use by your KENWOOD dealer, an authorized KENWOOD service UNPACKING AND CHECKING EQUIPMENTNote: The following unfacility, or the factory. Carefully unpack the transceiver. We recommend that you identify the items listed in the following table before discarding the packing material. If any items are missing or have been damaged during shipment, file a claim with the arrier immediately. Ƈ Supplied Accessories QuantitycItem Part Number Microphone (with cable) T91-0639-xx 1Microphone hanger J19-1584-xx 1DC power cable •Fuse (15A) E30-7523-xx F52-0024-xx12Mounting bracket J29-0726-xx 1 Screw Set: •5 x 16 mm self-tapping screw (4pieces) •Hex-headed screw with washer (4 pieces) )•Flat washer (4 pieces) N99-xxxx-xx 1 •Spring washer (4 piecesInstruction Manual B62-××××-×× 1 INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY THE FCC This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can generate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer for technical assistance.
Download:
Mirror Download [FCC.gov]
Document ID833610
Application IDEEu279uMCW03W5nvpmk6ZQ==
Document DescriptionInstruction Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize8.84kB (110533 bits)
Date Submitted2007-08-24 00:00:00
Date Available2007-08-24 00:00:00
Creation Date2007-07-10 14:06:34
Producing SoftwareAcrobat Distiller 6.0 (Windows)
Document Lastmod2007-07-10 14:07:53
Document Titleuntitled
FCC ID Filing: K44378700

Navigation menu