JVCKENWOOD VBA006 Bluetooth audio adaptor for vehicle use. User Manual
JVC KENWOOD Corporation Bluetooth audio adaptor for vehicle use. User Guide Setup
a href="https://usermanual.wiki/JVCKENWOOD" itemprop="url">
JVCKENWOOD >
Contents
- 1. User Guide Setup
- 2. User Guide
User Guide Setup
![INSTRUCTIONS / MANUAL DE INSTRUCCIONES / MANUEL D’INSTRUCTIONS / BEDIENUNGSANLEITUNG / ISTRUZIONI / INSTRUÇÕESLVT2214-002AKS-BTA100EN, SP, FR, GE, IT, PR© 2010 Victor Company of Japan, LimitedFor Customer Use:Enter below the Model No. and Serial No. which is located either on the rear or bottom of the speaker unit. Retain this information for future reference.Model No.Serial No.Using the Bluetooth deviceWarningStop the car before operating the unit.CautionOperations may be different according to the connected device.Registration of the Bluetooth deviceRegister (pair) a Bluetooth device1 [Hold this button for 5 seconds.]A play/pause button flashes on and off. 2 Search the KS-BTA100 from your device.3 If a PIN code is required, enter “0000”. (It is not necessary for some mobile phones.)When registration is completed, a play/pause button lights up.Using the Bluetooth mobile phoneReceiving a callWhen a call comes in...Making a call (Redial)Making a call to the last connected number from your phone.Switching between handsfree and phoneWhile talking...•••(Low) (High)MicrophoneAdjusting the microphone volumeVolume level: High/ Normal (initial)/ Low[Hold]Ends/rejects callVoice dialingVoice dialing is available only when the connected mobile phone has the voice recognition system.••Delete all registered devices from the list.•[Hold the two buttons at the same time for about 10 seconds.]Using the Bluetooth audio system[Press] Selects track.[Hold] Fast-forwards or reverses the track.[Press] Play/Pause[Hold] Stop■■■Fig A/Fig A/Fig AFig B/Fig B/Fig BTo JVC receiver/To JVC receiver/To JVC receiverKS-BTA100Brown/Brown/BrownBlack/Black/BlackBlue (white stripe)/Blue (white stripe)/Blue (white stripe)Receiver’s Power Cords / Receiver’s Power Cords / Receiver’s Power CordsENGLISHThank you for purchasing a JVC product.InstallationWarningAvoid installing the adapter unit in the following places.Where they would hinder your safety driving.Where they would be exposed to direct sunlight or heat directly from the heater or placed in an extremely hot place.Where they would be subject to rain, water splashes or excessive humidity.Where they would be subject to dust.Where they would be positioned on an unstable place.Where they could damage the car’s ttings.Where radio wave interferes (EX.: trunk, etc.)Mounting the adapter unitWipe clean the selected surface sufficiently, and affix the Double-sided tape. (refer to Fig A)Connection(refer to Fig B)–––––––■■Power cord (Blue,white stripe) /Power cord (Blue,white stripe) /Power cord (Blue,white stripe) /Negative ground /Negative ground /Negative groundPower cord (Brown) /Power cord (Brown) /Power cord (Brown) /ESPAÑOLThank you for purchasing a JVC product.InstallationWarningAvoid installing the adapter unit in the following places.Where they would hinder your safety driving.Where they would be exposed to direct sunlight or heat directly from the heater or placed in an extremely hot place.Where they would be subject to rain, water splashes or excessive humidity.Where they would be subject to dust.Where they would be positioned on an unstable place.Where they could damage the car’s ttings.Where radio wave interferes (EX.: trunk, etc.)Mounting the adapter unitWipe clean the selected surface sufficiently, and affix the Double-sided tape. (refer to Fig A)Connection(refer to Fig B)–––––––■■FRANÇAISThank you for purchasing a JVC product.InstallationWarningAvoid installing the adapter unit in the following places.Where they would hinder your safety driving.Where they would be exposed to direct sunlight or heat directly from the heater or placed in an extremely hot place.Where they would be subject to rain, water splashes or excessive humidity.Where they would be subject to dust.Where they would be positioned on an unstable place.Where they could damage the car’s ttings.Where radio wave interferes (EX.: trunk, etc.)Mounting the adapter unitWipe clean the selected surface sufficiently, and affix the Double-sided tape. (refer to Fig A)Connection(refer to Fig B)–––––––■■Fig A/Fig A/Fig AFig B/Fig B/Fig BTo JVC receiver/To JVC receiver/To JVC receiverKS-BTA100Brown/Brown/BrownBlack/Black/BlackBlue (white stripe)/Blue (white stripe)/Blue (white stripe)Receiver’s Power Cords / Receiver’s Power Cords / Receiver’s Power CordsDEUTSCHThank you for purchasing a JVC product.InstallationWarningAvoid installing the adapter unit in the following places.Where they would hinder your safety driving.Where they would be exposed to direct sunlight or heat directly from the heater or placed in an extremely hot place.Where they would be subject to rain, water splashes or excessive humidity.Where they would be subject to dust.Where they would be positioned on an unstable place.Where they could damage the car’s ttings.Where radio wave interferes (EX.: trunk, etc.)Mounting the adapter unitWipe clean the selected surface sufficiently, and affix the Double-sided tape. (refer to Fig A)Connection(refer to Fig B)–––––––■■Power cord (Blue,white stripe) /Power cord (Blue,white stripe) /Power cord (Blue,white stripe) /Negative ground /Negative ground /Negative groundPower cord (Brown) /Power cord (Brown) /Power cord (Brown) /ITALIANOThank you for purchasing a JVC product.InstallationWarningAvoid installing the adapter unit in the following places.Where they would hinder your safety driving.Where they would be exposed to direct sunlight or heat directly from the heater or placed in an extremely hot place.Where they would be subject to rain, water splashes or excessive humidity.Where they would be subject to dust.Where they would be positioned on an unstable place.Where they could damage the car’s ttings.Where radio wave interferes (EX.: trunk, etc.)Mounting the adapter unitWipe clean the selected surface sufficiently, and affix the Double-sided tape. (refer to Fig A)Connection(refer to Fig B)–––––––■■PORTUGUÊSThank you for purchasing a JVC product.InstallationWarningAvoid installing the adapter unit in the following places.Where they would hinder your safety driving.Where they would be exposed to direct sunlight or heat directly from the heater or placed in an extremely hot place.Where they would be subject to rain, water splashes or excessive humidity.Where they would be subject to dust.Where they would be positioned on an unstable place.Where they could damage the car’s ttings.Where radio wave interferes (EX.: trunk, etc.)Mounting the adapter unitWipe clean the selected surface sufficiently, and affix the Double-sided tape. (refer to Fig A)Connection(refer to Fig B)–––––––■■Using the Bluetooth deviceWarningStop the car before operating the unit.CautionOperations may be different according to the connected device.Registration of the Bluetooth deviceRegister (pair) a Bluetooth device1 [Hold this button for 5 seconds.]A play/pause button flashes on and off. 2 Search the KS-BTA100 from your device.3 If a PIN code is required, enter “0000”. (It is not necessary for some mobile phones.)When registration is completed, a play/pause button lights up.Using the Bluetooth mobile phoneReceiving a callWhen a call comes in...Making a call (Redial)Making a call to the last connected number from your phone.Switching between handsfree and phoneWhile talking...•••(Low) (High)MicrophoneAdjusting the microphone volumeVolume level: High/ Normal (initial)/ Low[Hold]Ends/rejects callVoice dialingVoice dialing is available only when the connected mobile phone has the voice recognition system.••Delete all registered devices from the list.•[Hold the two buttons at the same time for about 10 seconds.]Using the Bluetooth audio system[Press] Selects track.[Hold] Fast-forwards or reverses the track.[Press] Play/Pause[Hold] Stop■■■Using the Bluetooth deviceWarningStop the car before operating the unit.CautionOperations may be different according to the connected device.Registration of the Bluetooth deviceRegister (pair) a Bluetooth device1 [Hold this button for 5 seconds.]A play/pause button flashes on and off. 2 Search the KS-BTA100 from your device.3 If a PIN code is required, enter “0000”. (It is not necessary for some mobile phones.)When registration is completed, a play/pause button lights up.Using the Bluetooth mobile phoneReceiving a callWhen a call comes in...Making a call (Redial)Making a call to the last connected number from your phone.Switching between handsfree and phoneWhile talking...•••(Low) (High)MicrophoneAdjusting the microphone volumeVolume level: High/ Normal (initial)/ Low[Hold]Ends/rejects callVoice dialingVoice dialing is available only when the connected mobile phone has the voice recognition system.••Delete all registered devices from the list.•[Hold the two buttons at the same time for about 10 seconds.]Using the Bluetooth audio system[Press] Selects track.[Hold] Fast-forwards or reverses the track.[Press] Play/Pause[Hold] Stop■■■Using the Bluetooth deviceWarningStop the car before operating the unit.CautionOperations may be different according to the connected device.Registration of the Bluetooth deviceRegister (pair) a Bluetooth device1 [Hold this button for 5 seconds.]A play/pause button flashes on and off. 2 Search the KS-BTA100 from your device.3 If a PIN code is required, enter “0000”. (It is not necessary for some mobile phones.)When registration is completed, a play/pause button lights up.Using the Bluetooth mobile phoneReceiving a callWhen a call comes in...Making a call (Redial)Making a call to the last connected number from your phone.Switching between handsfree and phoneWhile talking...•••(Low) (High)MicrophoneAdjusting the microphone volumeVolume level: High/ Normal (initial)/ Low[Hold]Ends/rejects callVoice dialingVoice dialing is available only when the connected mobile phone has the voice recognition system.••Delete all registered devices from the list.•[Hold the two buttons at the same time for about 10 seconds.]Using the Bluetooth audio system[Press] Selects track.[Hold] Fast-forwards or reverses the track.[Press] Play/Pause[Hold] Stop■■■Using the Bluetooth deviceWarningStop the car before operating the unit.CautionOperations may be different according to the connected device.Registration of the Bluetooth deviceRegister (pair) a Bluetooth device1 [Hold this button for 5 seconds.]A play/pause button flashes on and off. 2 Search the KS-BTA100 from your device.3 If a PIN code is required, enter “0000”. (It is not necessary for some mobile phones.)When registration is completed, a play/pause button lights up.Using the Bluetooth mobile phoneReceiving a callWhen a call comes in...Making a call (Redial)Making a call to the last connected number from your phone.Switching between handsfree and phoneWhile talking...•••(Low) (High)MicrophoneAdjusting the microphone volumeVolume level: High/ Normal (initial)/ Low[Hold]Ends/rejects callVoice dialingVoice dialing is available only when the connected mobile phone has the voice recognition system.••Delete all registered devices from the list.•[Hold the two buttons at the same time for about 10 seconds.]Using the Bluetooth audio system[Press] Selects track.[Hold] Fast-forwards or reverses the track.[Press] Play/Pause[Hold] Stop■■■Using the Bluetooth deviceWarningStop the car before operating the unit.CautionOperations may be different according to the connected device.Registration of the Bluetooth deviceRegister (pair) a Bluetooth device1 [Hold this button for 5 seconds.]A play/pause button flashes on and off. 2 Search the KS-BTA100 from your device.3 If a PIN code is required, enter “0000”. (It is not necessary for some mobile phones.)When registration is completed, a play/pause button lights up.Using the Bluetooth mobile phoneReceiving a callWhen a call comes in...Making a call (Redial)Making a call to the last connected number from your phone.Switching between handsfree and phoneWhile talking...•••(Low) (High)MicrophoneAdjusting the microphone volumeVolume level: High/ Normal (initial)/ Low[Hold]Ends/rejects callVoice dialingVoice dialing is available only when the connected mobile phone has the voice recognition system.••Delete all registered devices from the list.•[Hold the two buttons at the same time for about 10 seconds.]Using the Bluetooth audio system[Press] Selects track.[Hold] Fast-forwards or reverses the track.[Press] Play/Pause[Hold] Stop■■■](https://usermanual.wiki/JVCKENWOOD/VBA006.User-Guide-Setup/User-Guide-1382088-Page-1.png)
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1382088 |
| Application ID | r0GgJ/V9GsU52xJlydhvQw== |
| Document Description | User Guide Setup |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 83.32kB (1041487 bits) |
| Date Submitted | 2010-11-25 00:00:00 |
| Date Available | 2011-05-30 00:00:00 |
| Creation Date | 2010-11-10 15:55:13 |
| Producing Software | Adobe PDF Library 7.0 |
| Document Lastmod | 2010-11-10 15:55:16 |
| Document Title | User Guide Setup |
| Document Creator | Adobe InDesign CS2 (4.0.5) |