Jiangmen Pengcheng Helmets DWO-3 Bluetooth Helmet Headset User Manual NewBlueToothIntroduction

Jiangmen Pengcheng Helmets Ltd. Bluetooth Helmet Headset NewBlueToothIntroduction

Manual

Bluetooth Helmet HeadsetDWO-3Bluetooth Helmet Headset
Congratulations and thank you for having chosen the BiLT™Bluetooth helmet headset for motorcycle riders. This manual will helpoperate the headset, but you should first familiarise yourself withthe Bluetooth functions of your mobile phone or GPS devicebefore using.The BiLT™ Bluetooth helmet headset offers the following uses:- Bluetooth helmet headset for mobile phone communication.- Bike to bike intercom communication with another unit (up to 1.640 ft. / 500 meters range).- Turn by turn GPS navigation instructions (with compatible Bluetooth device).- MP3 connectivity (Bluetooth compatible version).The BiLT™ Bluetooth helmet headset is easy to install inside the helmet.When buying your headset or your helmet, please ask your dealer for compatibility of both.COMPATIBILITY WITH YOUR HELMETTROUBLESHOOTINGCONTENTS OF RETAIL BOXINTRODUCTION 6. Can not reconnect or connect with your mobile phone automatically7. Reset8. Unsolved problemSome regions of high RF strength or near high power TV transmitters, GSMstation or airport raders, can overwhelm the headset and stall the unit. Pleasecharge the unit, and it will be reset and work normally again. Please return the headset back to after-sale service department if you can notresolve the problem with the help of steps 1-6. button 1 >Power on / off>Paring>Start the intercom call>End the intercom callbutton 2 >Answer call >Reject call >Last number redial>Voice dial >Volume up & down >Play / Pause>Music Forward / BackwardLeft speakerRight speakerNote: The use of two speakers may be illegal in certain countries. Please check the local regulationsand act accordingly.Clear all pairing information of the Bluetooth helmet headset as user manualinstructed, then please delete all Bluetooth devices on your mobile phone then turnoff, take out your mobile phone battery for a few seconds, and then put back thebattery, turn on your mobile phone, restart the Bluetooth function and search andpair the bluetooth device again, after device paired successful, make sure you setthe option of helmet headset to be “Default/Trusted/Authenticated/Auto ConnectEnable/Always Visible/Discoverable” device. Now you can reconnect with yourBluetooth helmet headset.FCC StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:> Reorient or relocate the receiving antenna.> Increase the separation between the equipment and receiver.> Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.> Consult the dealer or an experienced radio / TV technician for help.FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.Note: When the Bluetooth helmet headset has no connection to the mobile phone ot other Bluetoothdevices, time more than 60 minutes later, the Bluetooth helmet headset will automatically be turned off.Charger and USB charger cable1 6Physically check whether the speakers and microphone have been correctlyconnected. Check if you have turned the volume down too low.The battery could be flat. Charge the headset for 3 hours and try again.If the microphone is too close to a speaker, the speaker will make a whistlingsound. Increase the distance between the microphone and the speaker.Please check whether the battery is too low or the use rang to your mobile phone is out of 10 meters or blocked by some obstacles like metel or water etc.that absorb much radio signals.Test connection with you mobile phone before purchasing. We cannot guarantee that the BiLT™ Bluetooth helmet headset can connect with all typesof mobiles as some mobile phone may not use the standard Bluetooth profile. 1. Not working2. No sound3. Whistling of the speakers.4. Loss of connection with the mobile phone or music sources5. Cannot connect with mobile phoneBluetooth Helmet Headset Bluetooth Helmet HeadsetFCC ID: AJZDWO-3MODEL: DWO-3VOL+VOL-This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:1. This device may not cause harmful interference, and 2. This device must accept any interfernce received,including interference that may cause undesired operation.
(1) Place the mobile phone and the Bluetooth helmet headset together within 1 meter.(2) Make sure the Bluetooth helmet headset is powered off.(3) Press and hold the Button 1 of the Bluetooth helmet headset about 8 seconds untilheard a “dudu” tone played and the Blue and Red LED indicator flashes alternately,and then release the button.(4) Initiate Bluetooth function of the mobile phone and search the Bluetooth helmet headset according to mobile phone user manual.(5) Choose the Bluetooth device with the name “DWO-3”, then press ok buttonto pair with it, enter pairing password <0000>, then the indicator turns intoregular Blue light flash, after that you will hear a “di” tone to indicate successpairing. Then you can transmit voice frequency through the Bluetooth helmet headsetand use the button of that to control music playing of the mobile phone. Note: 1. Some mobile phones don't need to input pairing password, because it can automatically complete the pairing process. 2. If the phone and the Bluetooth helmet headset has been paired ,and the phone is on the state of connection,after that every time turning on the headset ,it will automatically connect the mobile phone. If they are notconnected and the Bluetooth headset is idle state (blue LED short flashing every 3 seconds), a short press thebutton 2, the headset will initiate a connection to the headset.1. PAIRING WITH MOBILE PHONE2. AUTOMATICALLY ANSWER INCOMING CALLThe Bluetooth helmet headset has the automatically answer function, after 2 incoming call ring tones played (about 10 seconds), and if there is not any operations on the headset, the Blutooth helmet headset will answer the phone call automatically. 3. ANSWERING INCOMING CALLSPress button 2 to answer when there is an incoming call or you can answer it with yourmobile phone normally. 4. REJECTING INCOMING CALLSDouble press button 2 to reject an incoming call.5. Hand UpIn call active state, a short press button 2 can hang up the call.6. LAST NUMBER REDIAL(1) Left twist twice button 2 can redial last called out number when connected withmobile phone.(2) When playing music through bluetooth, if you want to redial last called out number , first you must stop playing music and then left twist twice button 2.7. Voice DialWhile the Bluetooth helmet intercom headset is connected with the mobile phone,right twist twice button 2, then the mobile will prompt you to speak out yourdesired name. When playing music through bluetooth, if you want to do that, firstyou must stop playing music and then right twist twice button 2 to come to voice dial.8. VOLUME CONTROLIn phone or intercom call active and music-playing state, left twist and hold button 2 can go to turn down the volume, right twist and hold button 2 can go to turn up the volume, when reaching the maximum or minimum volume,a "DiDong" tong will be played. INSTALLATION OPERATION OPERATION POWER ON & OFFENTER PAIRING MODEMOBILE PHONE OPERATIONIn power off state, press and hold Button 1 for about 8 seconds until a “didi” tone played and the Blue and Red blue LED indicators flash alternately, the headsets are on pairing mode (the Bluetooth headset can be searchedand paired only when it is on pairing mode).1 In power off state, press and hold Button 1 for about 3 seconds until a short “di” tone played and the Blue LED indicator flashes, the headset is powered on. 2 In power on state, press and hold Button 1 for about 8 seconds until a short “di” tone played and Blue LED indicator shut off, the headset is powered off. 1. Pairing Intercom Headsets 1.1 Please press and hold Button 1 until Red/Blue lights flashes alternately to enter Pairing Model. 1.2 Short press Button 1 of either headset, it will search the other one which inpairing state, and then try to pair with it. Note: Please do not press both Button 1 while starting the search operation ! 1.3 Within a few seconds, both headsets will turn off the red light, and thenflashing slowly in blue. Pairing is finished. 1.4 To pair with another headset, repeat the above steps please.2. After pairing successfully, just short press either of Button 1, then the intercomfunction will be activated.3. Pairing is a one time process. Once the headsets are paired during this setup procedure, they will remain paired and automatically recognize each other wheneverthey are within available range.4. Either of headset users wants to end the intercom talking function, just short presseither of Button 1, and then the intercom function will be terminated.5. Mobile phone has highest priority. Mobile phone call can interrupt the intercom call. The intercom will be restored automatically after phone call ended.6. User can select to talk with the second rider or the third one (connect 3 ridersat the same time) 6.1 Either of the talking riders wants to talk with the third one, just double clickbutton 2, and then it will connect with the third rider who is on Standby. 6.2 The third rider who is in the standby state can initiate to call the other two who are in talking state, just double click button 2 to callthe Riders. 6.3 The rider who been called will hear“dududu”, and the called rider can doubleclick button 2 to accept and incoming intercom request, or just do nothing toignore the request.(Please pair each other and everybody is on standby state while you want to use switch talking function among3 headsets. This function can be used in rider to pillion and another rider, or rider to 2 riders.) Note: the mobile phone has to support Bluetooth Hands free protocol to realize rejecting, last number redialingand voice dial functions. For voice dial function, some mobile phones need user to manually set it in the mobile phone.3 41 Headset control box mounting plateThe headset mount plate must be mounted ontothe helmet first. Once mounted, the headset unitcan be attached or detached from the sliding plate at any time you want. The unit is designed to be mounted on the left side of the helmet. Note: it is better to remove it from the mounting platewhen not in use.2 Mounting the microphone and speakers- Ensure your helmet has enough room to mount the speakers (ie; cutout).- Certain models of BiLT™ helmets are equiped with the specific cut-outs for thismodel, DWO-3. At time of printing (Jan 2012) BiLT™ compatible model include;Dominator, Tour Tech, Tour Tech TSS, GP3&CFK-1. For fitment to any other motorcycle helmet please consult your local dealer for expert advice.- Fit the velcro tabs into the cut-out on the above BiLT™ helmet, or where applicable on other helmets then attach the speaker to the velcro tab (note: short speaker cord for left, long speaker cord for right).- Ensure the microphone is positioned in close proximatior to the mouth. On above BiLT™ helmets the microphone can be routed behind the removable cheek pads.Always prioritise your riding, not mobile phone calls. During a mobile phone conversaton,or while using the intercom, decelerateand concentrate on your riding. In bad weatherand/or heavy traffic we recommend pulling over and stopping before answering. Feed cords under the helmetliner if possible and asclose to the bottom ofthe helmetRight speakerMicrophoneCable & JackLeft speakerINTERCOM OPERATIONBluetooth Helmet Headset Bluetooth Helmet HeadsetFCC ID: AJZDWO-3MODEL: DWO-3VOL- VOL+
OPERATION The BiLT™ Bluetooth helmet headset is a water-resistant device, designedfor use under moderate rain or snow conditions. However, the headsetis not waterproof and should not be used under severe weather conditions.1 Please pair GPS device and please refer to the GPS navigator user manual first to share the audio information from GPS via A2DP. 2 In phone or interoom call active and music-playing state, left twist and hold button 2 can go to turn down the volume, right twist and hold buttom 2 can go to turn up the volume, when reaching the maximum or minimun volume, a “DiDong” tone will be played.3 Mobile phone or intercom calls have a higher priority than GPS audio. Mobile phone/intercom calls will interrupt the GPS audio. The audio will be restored automatically after the call has ended.Please refer to the devices user manual first.1 PLAY / PAUSEUnder Bluetooth A2DP music play state, short press the button 2 to playor pause the music.2 TRACK FORWARDRight twist button 2 to forward track.3 TRACK BACKWARDLeft twist button 2 to backward track.Note: The above funtion requires the music device to support Bluetooth A2DP and AVRCP.FUNCTIONS >Bluetooth® Hands-free >Last number redial >Automatically answer call and voice dial >Reject a call >Independent mobile phone volume control and memorize>Mobile phone highest priority >Bluetooth® A2DP music Play>Enjoy music from Mobile phone or other music sources >Remote control music play with AVRCP >Independent music volume control and memorize >Music third priority after phone call and intercom >Music volume soft restore back BATTERY CHARGING The unit has an embedded rechargeable battery. Please charge the unit forappox 3 hours before use. The red LED will shine still when the battery is fully charged.- Please use the USB cable gently, do not pull it too hard or the headsetmay be damaged.- In order to keep the battery capacity and extend it’s life, please store theheadset in 15℃ to 25℃ environment while not use.Bluetooth Helmet Headset5 2Supports HSP, HFF, A2DP, AVRCP, and Full DuplexintercommunicationDWO - 3LED Light IndicatorLED Indicator typeAll LED indicator offRed/Blue lights flashing alternatelyBlue light short flashing every 3 sec.Blue light long flashing every 3 sec.Red Led flash 2 times every 60 minutesRed Led indicator flash once everysecondRed Led indicator shining stillIndicated StatePower offPairing modeStandby stateConnected stateBattery is lowChargingCharging completedMUSIC OPERATIONGPS NAVIGATOR OPERATIONSPECIFICATIONSNote: Please do not use the headset while chargingBluetooth Helmet Headset

Navigation menu