Kaba Ilco IRKEP1 Smart remote programmer User Manual

Kaba Ilco Corp Smart remote programmer

Contents

User manual

蓝牙 LED 电源 LED（Bluetooth LED, Power LED）
遥控器生成感应区域 (Induction area of generating remote)
点击 APP“Discover”,点击“BlueTooth Settings”,点击“Click to search”，点击“Pair”，
默认密码 KEYDIY，手机 APP 与生成器匹配完成。
Click APP “Discover”—— click “Bluetooth Setting” —— “Click to search”——
click “Pair”,
Default password is “KEYDIY”, Finish matching the mobile phone with device.
输入电压 Input Voltage：6V
输入频率 Input frequency：200-500Mhz
输入功率 Input power：0.9W
输入电流 Input current：150Ma
输出电流 Output current：100MA
输出电压 Output voltage：3.3V
Product description
Users will choose the specified car remote option by Mobile phone
APP， APP will find the relative data from the database and send
the data to the Bluetooth module of the generating device by
Bluetooth technology, after the device chip MCU has received the
data from Bluetooth module, it will test and dispose the data, then
transmit it to the nearby NFC Contactless tag module by NFC
Contactless card reader module, after the remote control ASIC
MCU has received the data from NFC Contactless tag module, it
will test and dispose the data, then save the data in the memory
module and finish downloading the remote data. After succeeding
in completing all these processes, the users will only need to
operate the key module, the remote control ASIC MCU will use RF
transmitter module to send all kinds of control instruction to the
specified cars.
Remote includes: Remote control ASIC MCU、RF transmitter
module、memory module、Contactless card reader module、KEY
MOUDLE.
Generating Device: Device chip MCU 、Bluetooth
Communication module、Contactless card reader module
Mobile phone APP：Bluetooth Communication Technology、
Database Storage technology、 UI Interface
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.

Navigation menu