Kelvin Hughes CTX-A9 'S' Band Radar User Manual Installation Manual
Kelvin Hughes Limited 'S' Band Radar Installation Manual
Contents
- 1. Installation Manual
- 2. Warnings
Installation Manual
INSTALLATION
DOWNMAST TRANSCEIVER (CTX-A9)
WARNING
ENSURE THAT ALL POWER SUPPLIES IN THE VICINITY OF THE
TRANSCEIVER ARE ISOLATED BEFORE ANY INSTALLATION TAKES
PLACE.
Construction
18 The general construction of the downmast S-Band transceiver comprises a sheet-metal
rear plate which is formed, to include the top of the unit. This is braced by two ‘U’
sections which protrude above and below the plate, providing the bulkhead fixing points.
19 The PCBs are mounted both sides of the modulator chassis and are removed as a
complete assembly.
20 A wrap-around cover made from sheet-metal, encloses the unit and is fixed by six captive
screws. Removing the cover gives access to the front and sides of the Transceiver
electronics. Cable entry is at the bottom of the unit.
Mounting
21 Fit the transceiver to the securing bulkhead using the installation bolts supplied with the
fitting kit. Refer to Figure 1 for dimensions.
KH1252
Chapter 4
Page 4.6 Issue 1
KH1252
Chapter 4
Issue 1 Page 4.7
Transmitter Weight : 30kg
Power Consumption : 140W
COMPASS SAFE DISTANCES :-
1.9m (Grade I)
1.1m (Grade II)
Standard Compass
Steering Compass
oo
o
At Relative Humidity 0% : -15 C to +55 C
At Relative Humidity 95% : +40 C
OPERATING TEMPERATURE RANGE
T
O
P VIEW
CABLE ENTRIES
SYNC. & VIDEO SOCKETS
15.8mm SLOT
670
BETWEEN
FIXING
CENTRES
420
88.4
720 645
19
250
122.6
25
250
BETWEEN FIXING CENTRES
85
CD-4100
Figure 1 - Downmast Transceiver (CTX-A9): Installation Dimensions