Klein Tools AEPJS1 Bluetooth Speaker User Manual

Klein Tools Inc. Bluetooth Speaker Users Manual

Contents

15_AEPJS1 UserMan,r2.pdf

Bluetooth Speaker AEPJS1 User Manual Accessories: 1. Micro USB Cable ( for charging ) 2. 3.5mm Audio cable ( AUX-in cable ) 3. User Manual Highlights : IPX6 waterproof, suitable for outdoor. Bluetooth Connection: Turn the speaker on by pressing the power for several seconds, then the blue led flashes quickly. The speaker now has entered the Bluetooth pairing mode. Connect to mobile phones: 1. Activate your phone's Bluetooth 2. Go to your phone's Bluetooth settings , scan for new Bluetooth devices 3. Upon device found(AEPJS1), click the device name and pair with it 4. If your phone ask for pairing code , please enter ”0000” and confirm it. 5. After successful pairing, your speaker will sound a prompt tone and the LED lights blue. Note: Pairing time is varied with different mobile phones. Bluetooth Connection: Speaker will have the voice instruction for incoming call.Short Press to answer the call and talk to the speaker directly. Short press to end the call and back to play status. Long press to reject the incoming call.Long press to dial back the last dialed phone, but it will be invalid if there is no phone conversation. AUX audio-in connector: The speaker also features 1x AUX audio in port, simply connect the speaker with your non-Bluetooth mobile phone/MP3 player/PC/laptop with the 3.5mm jack audio cable. The green will be on, then you can play music via wired connection Low power indication: Speaker will have voice hint to remind you to charge if battery is low( battery only left 10%). Users need to charge the speaker timely. Charging and computer connection : Connect the micro USB charging cable to a computer or USB charger, red Led indication for charging status. Red LED goes off upon charging finished.
Specifications: Speaker Interfaces: Audio input connector: 3.5mm AUX cable : support aux external audio input. Charging interface: Micro USB; Input 5V Dimensions And Basic Parameters: LENGTH: 96.4 ± 0.2MM WIDTH: 88 ± 0.2MM HEIGHT: 49.6 ± 0.2MM MATERIAL: ABS Weight: 267G±5G Electrical Specifications: ·Bluetooth Compatibility: It conforms to Bluetooth V3.0 Class II and supports A2DP V1.2, AVRCP V1.4 profiles agreement. ·Transmission distance: up to 10 m ·sound track: single track ·Maximum Output: 3W ·signal to noise ratio S / N: ≥ 80dB ·Frequency Range: 180Hz-20KHz ·Distortion THD: ≤ 1% ·speaker unit: outer diameter 50mm, inner magnet, 4Ω, 5W Parameters of power: ·Rated voltage: 3.7V DC ·Battery: built-in lithium battery, 3.7V/2200mAh ·Charging Voltage/Current: 5V ± 0.25V / 5A ·Charging time: 5.5 ± 0.5 hours Function Operation Answer a call During an incoming call, short press key to answer the phone, short press again hand up phone and back to play music End or refuse a call Short press key to end the call or long press to refuse the call. Power ON / OFF Long press to power on / off Volume - or + Press Volume +/- to adjust
Note : 1. Under Bluetooth mode when the 3.5mm audio plug is inserted in, the speaker will switch to line in status automatically; 2. Please switch off the speaker if don’t use to prevent power loss LED status: 1.Bluetooth status: blue light flashing for pairing. Blue light keep on for connection status. 2. Line in mode: green light on 3. Charging status: red light on 4. Charging completed: red light off WORKING TEMPERATURE Temperature: 0º C ~ 40º C Humidity: 0% ~ 85% RH STORAGE CONDITION Temperature: -30º C ~ 60º C Humidity: 0% ~ 90% RH
FCC Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐‐Reorient or relocate the receiving antenna. ‐‐Increase the separation between the equipment and receiver. ‐‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐‐Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device is measured RF output power is less than the SAR exclusion threshold value for human head and body. Therefore, SAR test is not necessary. IC Statement This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Navigation menu